Reg: How to Run a Script File in WebLogic Server 10.3.3

Hi WebLogic Experts,
In our project we are using WebLogic Serve 10.3.3. I need to run one script file. could you please suggest me where should i need to place that script file in WebLogic Server 10.3.3 and How to run & stop that Script file.?
please experts i waiting for your's reply..
Thanks & Regards,
Induja..

1. You can put a command line into startWebLogic.sh to start your script file.
2. In your proyect you can create a java class to run the script file.
3. You can create a java class to run the script file an setup it like a startup class into weblogic server.
4. You can create a java class to run the script file an setup it like a job scheduler into weblogic server.
In what time you need run this script file?

Similar Messages

How to run standalone java file from weblogic server on Solaris

Hi,
We have a requirement to run a java file at a scheduled time in a day using cron scheduler on our linux server.
We need to fetch data from the database & perform some business logic in this standalone JAVA file.
Our application has an EAR which is deployed on Weblogic 10.3 server & in our application, we are utilizing the datasource created in that domain.
Now, we have created a standealone Java file & used exisitng datasource (without Hibernate) of the domain with the help of below forums,
Use DataSource of weblogic in a standalone Java file
able to achieve the same.
I've bundled this JAVA in application WAR & depoyed on the same domain where datasource is created.
Now, how can I execute this file from anywhere on the server using weblogic classpath.
Please help on the same in implementation.
Thanks,
Uttam

If the Java application must be stand-alone you must not deploy it on WebLogic, then WebLogic will manage its lifecycle.
In this case you can use the CommonJ API and use the timermanager if it must run on a certain time. More information
of how to do this can be found here: http://middlewaremagic.com/weblogic/?p=5569
If you keep the Java application stand-only and want to use a cron job you can follow the example presented here: http://middlewaremagic.com/weblogic/?p=7065
Note that the example runs a WLST script, but you can follow the same steps to run your Java application.

How to deploy a war file on Weblogic Server 7.0??

Hello Everyone
I am trying to deploy a servlet on Weblogic Server 7.0 as a WAR file. Can anyone of u plz tell me the steps required to do that. I am posting this question on EJb forum and not on servlets coz this is not a servlet problem, rather this is something which is related to J2EE, ie how to deploy a war file on J2EE Server.
This is how i have done it, but this is not working---
(1) First i created a directory structure for the web application according to J2EE Specification.
C:\Work\
myServletWAR\
META-INF\
WEB-INF\
classes\
HelloServlet.class
web.xml
i.e within work directory, there is a dic called myServletWAR which is my application directory which contains 2 sub directories viz META-INF which contains the mainifest file being generated by the jar utility. the second directory in the myServletWAR application dir is WEB-INF, which contains one file called web.xml for servlet mapping and one directory classes which contains HelloServlet.class
(2) I used following command for creating war file from myServletWAR director(i.e from my web application's directory).
jar -cvf TestServletWAR.war .
This creates the TestServletWAR.war file in myServletWAR dir.
Here is how my Servlet and web.xml looks like...
Servlet code
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloServlet extends HttpServlet
public void doPost ( HttpServletRequest req, HttpServletResponse res )
throws IOException, ServletException
doGet( req, res );
public void doGet ( HttpServletRequest req, HttpServletResponse res )
throws IOException, ServletException
res.setContentType( "text/html" ); // Can also use "text/plain" or others.
PrintWriter out = res.getWriter();
// Get the requestor's IP address (See JavaDocs to see how to get other info):
String addr = req.getRemoteAddr();
// Create output (the response):
out.println( "<HTML><HEAD><TITLE>HelloServlet in myServletWAR</TITLE></HEAD>" );
out.println( "<BODY><H1 ALIGN=\"CENTER\">" );
out.println( "Hello " + addr + ", from HelloServlet in myServletWAR!" );
out.println( "</H1></BODY></HTML>" );
out.close();
************************Servlet Ends Here **************************
web.xml
---------------------------------------------------------- <!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>myServletWAR, a first Web Application</display-name>
<description>
This is a simple web application containing a single servlet
of the "Hello, World" variety.
</description>
<servlet>
<servlet-name>myHello</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>myHello</servlet-name>
<url-pattern>/myHello</url-pattern>
</servlet-mapping>
</web-app>
****************************web.xml file ends here********************
After deploying the TestServletWAR.war file on the weblogic 7.0, i tried to execute the servlet from the browser by the following URL
http://localhost:7001/myServletWAR/myHello
I am getting the HTTP 404 Error, which is an indication that weblogic was unable to find the resourse, which it was requested for. Can anybody plz tell me what i m doing worng?? do i need to use weblogic related xml file (i.e weblogic.xml) also along with web.xml. If yes, then what all i need to include that. I m not very sure. A sample weblogic.xml file for this HelloWorld example will help me a lot.
Looking forward for your help
Thanx in advance
Nisha

hi i have read ur answer regarding deploing a servlet in weblogic 7.0
i am facing another problem
when i try to access the servlet inside my classes directory it throwa an error stating this :
IT DOES NOT FOUND THE CLASSES ON WHICH MY SERVLET DEPENDS.WHAT DOEES ATHIS MEAN
KINDLY TELL ME
PUNEET JAIN
<May 28, 2003 1:46:25 PM IST> <Error> <HTTP> <101250> <[ServletContext(id=6057728,name=WebApp,context-path=/WebApp)]: Se
rvlet class myclasses.Wservlet for servlet welcome could not be loaded because a class on which it depends was not found
in the classpath D:\bea\user_projects\PuneetDomain\applications\WebApp;D:\bea\user_projects\PuneetDomain\applications\W
ebApp\WEB-INF\classes.
java.lang.NoClassDefFoundError: myclasses/Wservlet (wrong name: Wservlet)>
<May 28, 2003 1:46:26 PM IST> <Error> <HTTP> <101018> <[ServletContext(id=6057728,name=WebApp,context-path=/WebApp)] Ser
vlet failed with ServletException
javax.servlet.ServletException: [ServletContext(id=6057728,name=WebApp,context-path=/WebApp)]: Servlet class myclasses.W
servlet for servlet welcome could not be loaded because a class on which it depends was not found in the classpath D:\be
a\user_projects\PuneetDomain\applications\WebApp;D:\bea\user_projects\PuneetDomain\applications\WebApp\WEB-INF\classes.
java.lang.NoClassDefFoundError: myclasses/Wservlet (wrong name: Wservlet)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:791)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:517)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:351)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

How to deploy an Ear File into Weblogic Server

Hello,
i have created an ADF application successfully and make it as an EAR file.
How can we deploy that EAR file into weblogic server..?
Let me know step-by-step procedure.
Regards.

Hi,
Steps to deploy EAR file on Weblogic server:
1) login to http://<hostname>:<port>/console
2) Go to deployments and then install your ear on weblogic server.
Also you will need to create a data source with same name as given in your Application Module.
Following link contains steps for data source creation - http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html ( section - "Configure a JDBC Data Source")
Thanks,
Randhir

How to run SQL script file on Linux using Java ?

Hi,
I need to execute .sql file using java. I used following approach for this.
private void runScriptEvent(java.awt.event.ActionEvent evt) {
 String sqlOutput = "";
 String sqlPromptLines="";
 String currentFunctionName = "";
 if(con!=null){
 String userName = jTextField4.getText();
 String password = jPasswordField1.getText();
 String databaseName = jTextField3.getText();
 try {
 String script_location = "";
 ProcessBuilder processBuilder =null;
 Process process = null;
 //File file = new File("C:/ScriptFile");
 File file = new File("./SQL_Script");
 //File file = new File("E:\\install\\SQL_Script");
 if(file.exists()){
 File [] list_files= file.listFiles(new FileFilter() {
 public boolean accept(File f) {
 if (f.getName().toLowerCase().endsWith(".sql"))
 return true;
 return false;
 int count = 0;
 for (int i = 0; i<list_files.length;i++){
 script_location = "@" + list_files.getAbsolutePath();//ORACLE
//currentFunctionName = list_files[i].getName();
StringTokenizer st = new StringTokenizer(list_files[i].getName(), ".");
while(st.hasMoreTokens()) {
currentFunctionName = st.nextToken();
String extention= st.nextToken();
System.out.println("Function Name = "+currentFunctionName + "\t Extention = " + extention);
processBuilder = new ProcessBuilder("sqlplus",userName+"/"+password+"@"+databaseName, script_location); //ORACLE
processBuilder.redirectErrorStream(true);
process = processBuilder.start();
BufferedReader in = new BufferedReader(new InputStreamReader(process.getInputStream()));
String currentLine = null;
while ((currentLine = in.readLine()) != null) {
sqlPromptLines = " "+sqlPromptLines + currentLine +"\n";
count ++;
System.out.println(count+" " + currentLine);
if(currentLine.equalsIgnoreCase("Function created.")){
sqlOutput = "\n" sqlOutput currentFunctionName + " " currentLine"\n" ;
break;
}// end while
in.close();
process.destroy();
}//end for
}//end if file exists
} catch (IOException e1) {
jTextArea1.setText(e1.getMessage());
System.out.println("Script Done");
jTextArea1.append(sqlOutput);
}// end id Connection is not null
Above code working appropriate on Windows but not on Linux.
is there any changes needed ?
Regards,
Ajay
Edited by: Ajay Sharma on Nov 21, 2012 6:43 PM

Hi gimbal2,
about code
jTextArea1.setText(e1.getMessage());I am using this code so that the user will be prompted with a message rather than stack trace.
About the issue I am getting on linux i believe its because of following statement.
processBuilder = new ProcessBuilder("sqlplus",userName+"/"+password+"@"+databaseName, script_location); //ORACLERegards,
Ajay
Edited by: Ajay Sharma on Nov 23, 2012 12:05 PM
Edited by: Ajay Sharma on Nov 23, 2012 12:06 PM

How to Run Indesign Script in a file from plugin code in CS4?

Hi, I have the code to execute the InDesign script stored in external file for InDesign CS3. InterfacePtr<IScriptManager> scriptManager(Utils<IScriptUtils>()->QueryScriptManager(kJavaScriptMgrBoss)); InterfacePtr<IScriptRunner> scriptRunner(scriptManager, UseDefaultIID()); IDFile scriptFile(scriptFilePath); if (scriptRunner->CanHandleFile(scriptFile)) { ScriptData returnValue; PMString errorString; ErrorCode error = scriptRunner->RunFile(scriptFile); ASSERT(error == kSuccess); } But the RunFile() method is cs4 expects an additional argument of the type RunScriptParams. Someone please show me with a code snippet on how to excute a script file in CS4??

Dear Ian
Here I'm used the below coding in CS3, Its working fine....
//In CS3 Coding
PMString jsFullPath("c:\\windows\\sample.jsx"); // a path to my java script file
do
const
IDFile outFile(jsFullPath);InterfacePtr<IScriptManager> scriptManager(Utils<IScriptUtils>()->QueryScriptManager(kJavaScriptMgrBoss));
ASSERT( scriptManager ) ;
InterfacePtr<IScriptRunner> scriptRunner(scriptManager,UseDefaultIID());
ASSERT( scriptRunner ) ;
if(scriptManager){
InterfacePtr<IScriptRunner>scriptRunner(scriptManager,UseDefaultIID());
RunScriptParams params(scriptRunner);
ErrorCode err = scriptRunner->RunFile(outFile, kTrue, kFalse);
while(kFalse);
But the same time I used this coding in CS4, Its not woking
//In CS4 Coding
PMString jsFullPath("c:\\windows\\MacID\\BIN\\sample.jsx"); // a path to my java script file
do
const
IDFile outFile(jsFullPath);InterfacePtr<IScriptManager> scriptManager(Utils<IScriptUtils>()->QueryScriptManager(kJavaScriptMgrBoss));
ASSERT( scriptManager ) ;
InterfacePtr<IScriptRunner> scriptRunner(scriptManager,UseDefaultIID());
ASSERT( scriptRunner ) ;
if
(scriptManager){
InterfacePtr<IScriptRunner>scriptRunner(scriptManager,UseDefaultIID());
RunScriptParams params(scriptRunner);
ErrorCode err = scriptRunner->RunFile(outFile, params);
while(kFalse);
I changed the "RunFile" arguments also
RunScriptParams params(scriptRunner);
ErrorCode err = scriptRunner->RunFile(outFile, params);
But Still I'm facing the problem in InDesign CS4. That's mean "Adobe InDesign CS4" shout down for serious error happend.
Please kindly help me, for solving this problem.
Thanks & Regards
T.R.Harihara Sudhan
Message was edited by: Adobe-InDesign CS4

How to run a script on Oracle server from isqlplus

Hi I am trying to run a script on my workstation from Oracle server through isqlplus workarea. I entered following command and get the following error. i have enabled isqlplus URL by editing web.xml file already. Can please someone help how to run the script?
@http://myaixserver.com:5560/scripts/Databasestartupstages.sql;
SP2-0920: HTTP error 'page not found (505)' on attempt to open URL

So far, you haven't specified your rdbms version and isqlplus behaved differently on a 9iR1, 9iR2 from the one release on 10gR1/R2. on 9i it was a servlet based on a JServ servlet executor machine, meanwhile on 10g it is a J2EE compliant application deployed on an OC4J container, so configuration is different.
You may want to take a look at these references -->
* Starting iSQL*Plus from a URL
* Creating Reports using iSQL*Plus
~ Madrid

C# Run VB Script file remotely thriugh PowerShell Invoke Command

I have a requirement where need to run vbscript remotely through PowerShell Invoke command. I can run the VB Script locally but not remotely as the vbscript file is not present on the remote machine. I don't want to copy the script file on remote machine.
Please let me know how to run vb script on remote machine. Below is the code.
Collection<PSObject> output
= null;
 using
(Runspace runSpace =
RunspaceFactory.CreateRunspace())
 runSpace.Open();
 using
(Pipeline pipeline = runSpace.CreatePipeline())
RunspaceInvoke invoke =
new RunspaceInvoke();
PowerShell ps = PowerShell.Create();
 ps.Runspace
= runSpace;
 ps.AddCommand("invoke-command");
 ps.AddParameter("ComputerName",
"RemoteServerName");
ScriptBlock sb = ScriptBlock.Create("cscript E:\\Test\\DeleteFiles.vbs");
 ps.AddParameter("ScriptBlock", sb);
 output
= ps.Invoke();
Regards, Parveen

Hello Parveen,
Please refer to the following thread
https://social.msdn.microsoft.com/Forums/vstudio/en-US/7562eefb-7fba-4bf6-834e-82256f159155/run-script-on-remote-macine?forum=csharpgeneral
See his code:
You can use WMI to create processes on a remote machine. In C#, use the ManagementClass.
using System;
using System.Management;
using System.Collections.Generic;
public class MyClass
public static void RunNotepad()
ManagementPath p = new ManagementPath(@"\\targetMachine\root\cimv2:Win32_process");
ManagementClass m = new ManagementClass(p);
m.InvokeMethod("Create", new Object[] {"notepad.exe"});
See: Creating Processes Remotely
Note that the the scrpt file is not executable so you have to create script like this:
cscript.exe "\\yourmachine\script\test.vbs".
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to run a jar file in JBuilder

Hi there
I need to know how to run a jar file using JBuilder. Thanks :)
Countess

well i have a german version of jbuilder and there it is under
experten Archiv-builder
look at something that has a similar name

How to run a JAR file in Unix system?

hi there
ca anyone tell me how to run a JAR file in unix system or X window, thank you

You want to create an executable JAR file? You do it in the following way.
Create a manifest file such as manif.txt and the contents should contain
Main-Class: foo
assuming foo is the name of your main class. Then create the jar as follows
jar cvfm foo.jar manif.txt foo.class
I hope that helps you!
you can find more info here http://java.sun.com/docs/books/tutorial/jar/

How to run an exe file in a java program

Hi,
Can somebody tell me how to run an exe file in a java program.
Thank you!

Yes, java.lang.Runtime.exec().
Read this carefully before you do:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
Don't write a line of code before you're reviewed and understood the article completely. - MOD

How to run a batch file as windows Nt service

Hi friends
I want to know how to run a batch file as windows NT service.
I got some information in the following link
http://support.microsoft.com/kb/q243486/
I tried it but i want to know what we need to include in Autoexnt.bat
And one thing i need Instexnt.exe file. I cannot find tht file.
Please search tht file and send me tht file or else send the link in which this file is present
Please give me reply fast.its very urgent.
Thanks in advance.

Hi,
My aim is to run a MS-DOS Batch file, that I created to run a Java Prgram.
I need to call the Batch File from the Oracle Procedure, Also I may need to change the content of the Batch File (Argument to the Java JAR File ).
I can keep the JAR FIle either in the Oracle Server or in the Application Server.
The Java program is to convert XML Format FIle to PDF and MS Word format.
Oracle Version : 10g 2.0.1.0.
Thanks in advance
Rizly

How to run a batch file

Hi,
How to run a batch file from Oracle. Is it possible directly from PLSQl, or should I write the java code.
Oracle Version: 10g 2.0.1.0.
Thanks in advance
Rizly

Hi,
My aim is to run a MS-DOS Batch file, that I created to run a Java Prgram.
I need to call the Batch File from the Oracle Procedure, Also I may need to change the content of the Batch File (Argument to the Java JAR File ).
I can keep the JAR FIle either in the Oracle Server or in the Application Server.
The Java program is to convert XML Format FIle to PDF and MS Word format.
Oracle Version : 10g 2.0.1.0.
Thanks in advance
Rizly

How to run the batch files

Hi Experts,
I am trying to implement automatic cache purging every day at specified time and i created txt file with SApurge All cache() and created bat file with nqcmd -q Analyticsweb -u username -p password -s (txt file location).
Now i want to run this bat file daily at specified time with out executing manually may i know how to run the batch file at specified time .
Thanks,

There is task type as command in workflow manager if you want you can go for that during the load
nqcmd -d "AnalyticsWeb" -u Administrator -p Administrator -s "D:\PowerCenter8.1.1\server\infa_shared\SrcFiles\1_BIPurgeCache.txt"
Check these urls
http://docs.oracle.com/cd/E12103_01/books/AnySched/AnySched_Scripts3.html
http://deliverbi.blogspot.com/2011/12/purge-all-cache-from-dashboard.html

How to run a script from Calculation Manager

Hi All,
I would like to know how to run a script made by using Calculation Manager. I have converted a simple rule script which has just one statement(HS.EXP "A#Sales = 100") in "Sub Calculate()" by using FMRulesMigrator.exe and then imported, deployed to an application. when I execute "Calculate" from a Data Grid, the rule didn't take effect to application data. If I load the script by using classic rule editor, it works fine.
Is there anything I have to know to run a rule script which is made by using Calculation Manager?
Thanks in advance.
CY.

Hi,
Refer the following the link for calling logic from new custom buttons using VBA.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f085dd92-a40c-2c10-dcb1-a7c24476b23a
hpe this ll help.
thnks.

Reg: How to Run a Script File in WebLogic Server 10.3.3

Similar Messages

Maybe you are looking for