How to combine text with variable in process flow

Hi,
I have created a function that returns the environment that a process flow is running in, Production, Test or Development. I have been able to bind the output of the function into a variable in a process flow and bind the variable to the subject of an email activity. I'd like to go one step more and combine the value of the variable with some text to explain which step in the process flow generated the email. Is there a way to concatenate text to a variable or to add an OWB system variable? I've seen an example where the subject of the email is
"Failed mapping <mapping name>"
but I want my subject to be "PROD Failed mapping <mapping name>" where the "PROD" is from a process flow variable or function return value.
Is this possible?
Thanks
Don Keyes

Hi Don,
you can perform this task with ASSIGN activity.
For example, you have two variable V_ENV_TYPE (with type of environment) and V_TEXT ("Failed mapping <mapping name>"). Define additinal variable V_NEW_TEXT, bind Variable parameter of Assign activity to V_NEW_TEXT variable and define value in Assign activity as
V_ENV_TYPE || ' ' || V_TEXTRegards,
Oleg

Similar Messages

How to combine the same variables from 2 queries in one webi report

HI ALL,
I created two BW queries/universe and put them into one web intelligence report. Both queries have the same mandatory variable. I combined the relevant dimensions but can't find how to combine the two variables, which resulted in pop-up for 2 variables.
Any idea?

Hey Dick Zheng,
Just to close it,
Instead of working on existing reports.
Create new report(s) on top of these changed Universes(2).
1. New WebI report on top of Univ1 (With Prompt)
2. New WebI report on top of Univ2 (Without Prompt)
If both are working as expected. Do follow below:
1. Open any Report (just created in above steps)
2. Edit Query
3. Add Query
4. Select another Universe
5. Drag few objects
6. Run Queries
Now see it is working as expected or not.??
Still any issues post here...,,
Gracias...!!

How to highlight text with Adobe Reader XI?

email [email protected]

Thanks. The PDF file was made from a web site article and I guess this is the same as scanned as I cannot highlight. The cursor changes but cannot highlight what I want.
I was able to add text and I did this in Red and will ask the VA to read under the sections marked in Red.
Thanks,
Vernon Pobanz
From: ~graffiti <[email protected]>
To: vernon pobang <[email protected]>
Sent: Tuesday, October 7, 2014 11:57 AM
Subject: How to highlight text with Adobe Reader XI?
How to highlight text with Adobe Reader XI?
created by ~graffiti in Adobe Reader - View the full discussionUse the highlight tool under Comment>Annotations. This will only work if the pdf isn't a scanned image. If that is the case, there is no text to highlight. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6800192#6800192 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do I text with the iPad 2 using cellular device?

How do I text with the iPad 2 using cellular device? I also have iPhone 4, can I use them both for texting?

The iPad doesn't have any text over cellular capabilities. You can use apps like Text Free to send texts to non-iOS devices, though.

Creating variables in Process Flows and using thse variables in the filter

Hi,
I am new to OWB and in learing stage. Need to information.
*1. as to how pass/create/use variables to OWB mapping ?*
*2. Creating variables in Process Flows and using thse variables in the filter operator of the OWB mapping?*
*3. Other mechanisms of how to create/use variables within OWB mapping itself ?*
can you please provide the above details and guide me / help me in this regard.
Thanks,
skms.

1. Add parameters to your mapping using the MAPPING INPUT PARAMETER from the pallette.
2. Add parameters to the START operator in the process flow. Bind the process flow parameter to the Mapping parameter.
3. May be appropriate to use CONSTANTS instead of parameters.
Regards
Si

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

Dynamic Standard text - Appending text with variable

Dear All,
We have a dynamic standard text. The text is being created based on sales order (I don't know how this has been created). Now I want to add text inside the standard text. That text will also contain variable.
Example: "This is a valid sales order 100010000". This is a standard text where the sales order value is fed dynamically, I don't know how?
Now the objective is to add another field "abcd" in the standard text with some other fixed texts. Eg. "I want to add my name sy-uname". So the entire text should be as:-
"This is a valid sales order 100010000. I want to add my name sy-uname."
1. I am not sure how to identify the original standard text. I would like to add second line there.
2. I would like to pass variable value dynamically in the standard text.
Please can you help me out in solving the issues.
Best wishes,
Atanu

Hi
Could you please be clear with your question so that some one can provide you with best solution quickly.
I am assuming that when your sales order is being created at the same time ,your dynamic standard text is generated .So now you want to amend this standard text just after the sales order is saved.If so then
Just go to the sales order text tab in change mode and click on the text eidtor window ,it will take to you sapscript editor ,Then from menu Goto-Header .From here you get the details of
Text Name
Language
Text ID
Text Object
Now Find the userexit after save and their use a read_text function module and read the standard text which is alreday created and take down in it_lines table and modify the text by appending your sy-uname line as second line or you can concetante on the same line. Now then use the save_text function module and save the standard text.
You can use the exit MV45AFZZ In that routine FORM userexit_save_document..
Hope this help you to resolve the issue.
Cheers
Joginder

How to combine rows with small numbers into single "other" row?

How can I combine rows with value 6(for example) or lower to single row representing the SUM of all this values and label OTHER, so the pie chart will have a chance to display all small values combined?
I'm using Numbers 09

HI Peter,
When you write a decimal number, is the decimal separator a period ( . ) or a comma ( , )? If it's a comma, then the syntax error can be corrected by replacing the list separator in the formula, a comma in Jerry's formula, with a semi colon ( ; ):
=SUMIF(B; "<6"; B)
(Added): The two Bs appear in blue 'lozenges' in Jerry's image because that is the way cell (or column) references are displayed in Numbers when a formula has correct syntax.
Regards,
Barry
Message was edited by: Barry

How I creatat text with hyperlink in application

hi all,
I want to creat some text with hyperlink (it mean when I click to text, it invoke other panel or web...). My program is Application. Can any one tell me how I do it. Pls help me!!!.
Thank you verry much

Is this text HTML? If so, just go to any of the 350,000 sites on the Internet that describe basic HTML. Otherwise, just output the URL as text.
However my guess is that your bigger problems are (a) how to notice the hyperlink is clicked and (b) how to invoke whatever it links to. Right?

How to combine TrivialPageFlowEngine with JAZN XML-based provider ?

With help TrivialPageFlowEngine possible will limit access to pages, and also to set pages for logon. However, JAZN XML-provider provides the same functionality. How to combine these two approaches

Rustam,
can you help me with "TrivialPageFlowEngine"? Where can I get documentation for it to have a quick lokk before replying to your request. Oracle9iAS JAAS (aka JAZN) is based on the Java Authentication and Authorization Service and implements it's own provider.
If you look in the OC4J demos for jazn, there are two samples explaining how to setup JAZN (If installing OC4J with Oracle9iDS or Oracle9iAS then jazn already is defined to be the default provider).
If e.g. you use Oracle9iAS and configure (and deploy) a Servlet for basic authentication, then this automatically is performed by the Oracle Single Sign-on server (if configured for OID) or direct jazn-data.xml (if not using OID). All your code needs to do is to get the authenticated principal's name.
From your posting it is not clear if you require authentication or authorization alike. Authorization requires permission classes to be written and assigned.
Fran

CCX Editor - How to combine 2 String Variables

[string] Variable1 = "/*"
[string] Variable2 = "4340"
I would like to combine these 2 Variables and set it to a 3rd Variable using the Set Step. So the final outcome would look like the following...
[string] Variable3 = "/*4340"
Here is what I have which is not working.
Set Variable3 = Variable1 + Variable2

Sorry guys. I actually had it correct. This is how I verified it.
Open CCX Editor without loading a script. Then, in the Debug menu choose Reactive Script. Choose your Script for the Script Name and then choose a timeout value. (I choose 15secs)
Dial the number that triggers the script. Click on Debug and Insert a Breakpoint before the End Step. Now click on Debug and start Debugging. Once the script hits the Breakpoint, click on the Debug menu again and choose Evaluate. You can now select your Variable and evaluate its value.
I noticed that I was using a / (forward slash) instead of a \ (back slash) as the escape character. I was combining my two variables but using the wrong slash. Oops. Thanks for the help though. I now see there are more than one way to accomplish this.

How to combine BOMs with Free Goods?

Dear all.
I am currently working on setting up a retail store in SAP ERP (6.0). Our client requires from us creating a functionality that would allow to create sets and add free goods to a certain set. For example: if you buy a set consisting of a hammer and a drill at a regular price, you get a pair of gloves free of charge.
We used BOMs to create the sets and attempted to combine them with Free Goods, which prooved impossible -- FGs don't work with BOMs. We also tried to use Bonus Buys, but these seem to be working only with SAP Retail, which is not available to us.
Do you know any way around this problem?
Grzegorz

Shantanu
It sounds pretty helpful, however, what we just found out it is impossible to give away free goods according to the local tax standards - so we have to give them away for a fraction of the price rather than free of charge. This forced us to create a separate logic to deduce different item categories in a sales order and different prices according to that.
Thanks anyway.
Grzegorz

How to combine sound with video to an AVI Using IMAQ?

I need to combine sound with video I capture and write it out as an AVI. Is there anyway in Labview to combine sound with and AVI? Or an easy to use third party product?

Hello,
The AVI tools that are provided with Vision allow for data to be added to your video. Sound information can be stored this way, but if you are looking for a way to add audio support to your video (such that it will play the sound file when the video is played in Windows Media Player or other applications) you may want to look into finding a shareware or freeware product that can accomplish this. LabVIEW does not have tools specifically targetted to this operation.
Good luck,
Robert

How do you text with other people not on an iPad or I phone?

Can you text with other phones beside iPhone?

Open the blue App Store icon and type it into the top right, plenty there to choose from.

How to bind mapping input parameter in process flow using OMB Plus

Hi
I have created a process flow with a mapping.
This mapping has a input parameter, that I want to bind to a variable using OMBPlus
OMBALTER PROCESS_FLOW '$process' MODIFY PARAMETER 'P_EOD_DATE_IN' SET PROPERTIES (BINDING) VALUES ('V_EOD_DATE') does not work as P_EOD_DATE is NOT a process parameter
neither does
OMBALTER PROCESS_FLOW '$process' MODIFY PARAMETER '$mapname/P_EOD_DATE_IN' SET PROPERTIES (BINDING) VALUES ('V_EOD_DATE') as the reference '$mapname/P_EOD_DATE_IN' is not valid.
Any suggestions ?
Best Regards
Klaus

Hi Klaus,
look here {thread:id=640397}
Regards,
oleg

How to combine text with variable in process flow

Similar Messages

Maybe you are looking for