How to communicate to the billing server?

Hi,
I need to know that how should i communicate to the billing server. I've created one app in which the request will come through the mobile user and i just need to check against his/her balance to the billing server through WSDL/SOAP. I'm bit confused around this. Do i need to configure something on the billing server or something else do i need to do to have a communication between billing server and my server side app.
As i'm new to this wsdl, so kindly help me out in this regard. I don't want to install any billing server on my application side. I just want to send a request to the billing server and billing server should send me the response for my generated request.
in advance thanks a lot....

the differents way are (maybe others exist ?):
-sockets
-posting messages via JMS
-files
-database

Similar Messages

  • CLI104 Unable to communicate with the administration server:

    i am doing a glass fish clustering with load balancer plugins using SJWS7.0 as the loadbalancer.
    i installed glassfish v2.1 and set up a cluster with a single node and single instance
    and i did all the steps as per this document
    https://glassfish.dev.java.net/javaee5/build/GlassFish_LB_Cluster.html
    i did all the steps with out any errors.
    but when i am trying to run the commad <websrvr_install_dir>/bin/wadm deploy-config --user=<websrvr_admin_user> <websrvr_instance_config>
    i am getting following errors
    CLI104 Unable to communicate with the administration server: Unable to connect t
    o admin-server. Please check if the server is up and running and that the host
    and port provided are correct.
    i don't how to fix this error , i search a whole day for fixing this errors.now i am waiting for help .please help me to fix this one
    Thanks and Regards

    The glassfish document that you mentioned does not provide any instructions to start the web server's administration server.
    Could you verify that the web server's administration server is indeed running? Do the following to start web server's administration server:
    $ <websrvr_instance_dir>/admin-server/bin/startservAfter that step try out the deploy-config command as described in the document.
    HTH.

  • TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

    Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Messenger Express: How do I add the Directory Server to the address book search tool?

    In Messenger Express (ME) how do I add the Directory Server (DS) to the address book
    search tool?
    <P>
    Edit the globals.pl file. Look for a line similar to: <BR>
    @dirservers = ('MyCompany::phonebook.foo.com::o=FooCorp.,c=US','Four11 Directory::ldap.four11.com::');
    <P>
    Add an entry to the list. The list is comma delimited and each entry is a
    string. The string contains three fields, delimited by a double colon (::). The
    first field is the name you want to appear in the User Interface (UI). The second is
    the hostname of the DS and the third is the Distinguished Name (DN) to use when searching.
    <P>
    Please note, Messenger Express is part of the Messaging Server. For more
    information on Messenger Express, please see the release notes at
    http://home.netscape.com/eng/server/MExpress/relnotes.htm

    You can't add a new contact to specific group and there is no app for this. 3rd party apps don't have access to private iPhone APIs with security concerns being a primary reason, which such a function would require.

  • How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

    How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

    Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918
    You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

  • How to find out the application server info

    Hi, I am wondering how to find out the application server info in Java code, just like how to find out the db platform being used. Thanks

    Hi,
    I am not aware of any spec defined way of finding out such info. There may be vendor specific APIs or mechanisms.
    But you can use environment entries in your deployment descriptors to specify the information and make use of the entries inside your j2ee component. That will make your code platform neutral.
    Sahoo

  • How I can get the Billing Type for the sales order and its items

    How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

    Hi,
    You need to use two tables.
    First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
    Then use the billing document numbers in table VBRK, where in you can get the billing document type.
    Regards,

  • I just registered a domain name. I would like to publish an iWeb site to own server. How do I get the FTP server settings?

    I just registered a domain name. I would like to publish an iWeb site to own Mac Mini server. How do I get the FTP server settings?

    reference:
    http://www.macinstruct.com/node/152
    http://www.macminiserver.com/
    http://www.macdrifter.com/2011/04/more-dropbox-fun-ftp-access/

  • How do I find the report server name, and then run paper report from forms?

    How do I find the report server name, and then run paper report from forms?
    I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
    Also, I just want to run the paper report (not the web version).
    Thanks.

    Hi,
    please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
    In summary, you have to create an external Reports Service that you can then give a name.
    Frank

  • Error: Unable to communicate with the Reports Server

    The configuration I am working with is:
    * Oracle 8.1.6 DB on a Unix machine
    * Oracle Reports 6i on an NT machine
    * Microsoft IIS web server
    I have successfully tested my reports during the development phase of my project. Unfortunately, now that it is considered production and is available to upwards of 30 people, I am getting the following error message after verifying the server is up and after a numerous reports have been served:
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Unable to communicate with the Reports Server.
    After receiving this message I noticed that the Report Server service is down and the log only indicates that it "shut down immediately". (no ORA messages) I tried restarting the service, but after serving one report, it would shut down again with the same message.
    I am wondering if it is a problem related to the cache. I used the default of 50M in the config file, but when the cache directory reaches 50M, the problem seems to appear. I then deleted approx. 30M of files from the cache directory and the Report Server service appeared stable. I changed the cache limit to 1M to see if there was a problem with the cache being so big. All appeared well for the first few hours of operation but then the Report Server service shut down again and upon restart crashed within a minute or two (usually as someone tests a report, it crashes again).
    Do I have a configuration problem? Has anyone seen this problem? Thanks in advance.

    Hi,
    I just found out that if i give
    http://localhost/cgi-bin/rwcgi60.exe?key1
    where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
    the report pulls out fine with the correct data..
    i am stunned...
    while none of the other commands like
    http://.../rwcgi60.exe
    or
    http://..../showenv?server=repserver
    or any other usual command doesnt work...
    anybody faced this before??
    Thanks.

  • Oracle reports 6i error unable to communicate with the reports server

    Hi,
    I have followed the steps for running oracle reports server 6i..i am using win2k3 and IIS6.0
    i have checked tnsnames.ora and sqlnet.ora and everything looks good..
    when i try
    http://localhost/cgi-bin/rwcgi60.exe
    i get a page called User Database Authentication and asks for username,password and database..instead of the help page that should be displayed..
    when i enter those values nothing happens for the first time and the same page is displayed again..when i enter it again i am getting this error
    url requested not found or cannot be served at this time
    oracle reports cgi: unable to communicate with the reports server
    any help would be grateful..
    Thanks.

    Hi,
    I just found out that if i give
    http://localhost/cgi-bin/rwcgi60.exe?key1
    where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
    the report pulls out fine with the correct data..
    i am stunned...
    while none of the other commands like
    http://.../rwcgi60.exe
    or
    http://..../showenv?server=repserver
    or any other usual command doesnt work...
    anybody faced this before??
    Thanks.

  • How can i solve the vpn server could not be found error on my iphone 5s?

    how can i solve the vpn server could not be found error on my iphone 5s?

    FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
    If I connect while in the premises (same LAN), connection is instantaneous and flawless.
    If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

  • TS2446 I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ? Please help me

    I can't buy on hay day game he told me contact iTunes support to complete this transaction after that told me the billing server not respond try again later and the other game same but I can buy games from the AppStore ?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

    I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

    the smtp server is the property of the mail provider and running in their server room
    talk to them
    and make sure the ports required by the mail providers smtp server are not blocked by your firewall or by your router or by your isp

  • The updater has been unable to communicate with the update server for at least 1h.

    Hi All,
    there is a warning message on one of my IronPort C300V
    Version: 8.0.1-023
    The error message is mention below
    "The updater has been unable to communicate with the update server for at least 1h."
    please suggest the issue and steps to resolve the problem or suggest that it is very critical so can i open the cisco tac call.
    Thanks ,
    Madhuraj

    If you continue to receive this error please check that the virtual appliance is configured to use the dynamichost for updating:
    myesa_2.local> updateconfig
    Service (images): Update URL:
    <ommitted for brevity>
    []> dynamichost
    Enter new manifest hostname : port
    [update-manifests.sco.cisco.com:443]>
    Once 'dynamichost' is entered, the current dynamic host in use will be displayed in the prompt [ ]>, as seen above. 
    You will need to verify that the appliance - escpecially if a virtual (VESA) - is using the correct host.
    Steve
    Cisco Content Security - Email Security

Maybe you are looking for