How to compare 2 table values

Hi all,
i have one internal table contains all records created in SD. but i need only records created for J_3avasso..
so i am comparing the first internal table (it_cdtemp1) records with values in j_3avasso and moving to another internal table (it_cdtemp2)
Please find the code for below.
select vbeln posnr etenr into corresponding fields of table it_cdtemp2
from j_3avasso for all entries in it_cdtemp1
where belnr = it_cdtemp1-vbeln and posnr = it_cdtemp1-posnr and
etenr = it_cdtemp1-etenr.
i could see the final internal table (it_cdtemp2) contains only 0 records.
please suggest a solution for this
Regards
Bala

Hi Bala,
Use CONVERSION_EXIT_ALPHA_INPUT FM for VBELN and convert all the entries of it_cdtemp1 with the leading zeros before the selection. Also make sure that there are entries in the table with the given selection criteria
Regards,
PSK

Similar Messages

How to update the table value in the valuechange event?

I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
     Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
     item.setCost(max_cost);
     item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?

As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

How to pass internal table values to parameter

hi,
         how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.

hi,
tables : mara.
data : begin of itab_mara occurs 0,
          matnr like mara-matnr,
          ernam like mara-ernam,
          end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
                                                                where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
           itab_mara-ernam.
endloop.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

How to get updated table values from objectlistdataproviders

how to get updated table values from objectlistdataproviders

Hi,
Here is a sample code
start-of-selection.
*Select the data you need into an internal table
loop at it_mara into wa_mara.
data that needs to be displayed in the output list
    write:/ box as checkbox,
            wa_mara-matnr under text-001,
            wa_mara-maktx under text-002,
            wa_mara-lgort under text-003.
Hide the data that needs to moved to internal table
    hide:wa_mara-matnr, wa_mara-maktx, wa_mara-lgort.
endloop.
clear wa_mara.
end-of-selection.
lines = sy-linno.
at line-selection.
clear:it_matnr.
do lines times.
    check sy-index > 1.
    box = space.
    read line sy-index field value box.
    if box = 'X'.
*data selected using check box is moved to internal table
      append wa_mara to it_matnr.
    endif.
enddo.
Regards,
Jisha.

How to compare dropdown pre value with post value in sharepoint designer list workflow

How to compare dropdown pre value with post value in sharepoint designer list workflow

Hi,
Can you provide more details about your requirement? It would make others easier to find a solution for you.
By default, a workflow will be triggered after submitting data in the NewForm or EditForm.
If you want to monitor the value changed in a drop down menu which is supposed to be in NewForm or EditForm, it would be more appropriate to apply custom JavaScript in the NewForm
or EditForm page.
About how to detect the value changed using JavaScript, the demos in this thread would be helpful:
http://stackoverflow.com/questions/12080098/dropdown-using-javascript-onchange
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to Refresh "Internal table values" in User EXIT.

Dear All,
My requirement is to place some checks in exit ZXQQMU20 in different tabs from the TCODE IW21 . IW22 etc.
Now after placeing the checks towards the different tabs while doing "NOCO" from IW21 the conditions are fullfilled but
when i go ahead to modify the created "NOCO " from the TCODE IW22 by deleting the created values and saving in IW22 , the conditions written in the exit are still satisfied eventhough i have deleted the values in IW22.
The reason for this is that the tables which are there in the exit ZXQQMU20 T_VIQMFE , T_VIQMUR , T_VIQMMA
still contains the old values which were there at the time of creation of "NOCO" in IW21 .
How to refresh my " internal tables values" used in such that even at the time of modification of the NOCO through IW22 my table values should pick the current screen values and not the values which were there at the time of creation.
Please help.
The code i have written in the exit is as below:-
********************* Changed vide ******START
*****IW21 IW22 also added in filter criteria of notification *************
******The purpose of this modification is that in the execution of IW21 or IW22 or IW24 or IW25 we have to give a check that if the
******notification type is M2 than inside the Transaction screen , if the Breakdown duration comes less than 15 min than there are
******no issues but if the breakdown duration is more than 15 min than the mandatory fields needs to be entered in the analysis tab.
**    The user has to fill up either following mandatory fields in Analysis Data tab.
**    A. Object Parts & Damages sub tab
**    Code Group - Object Parts (OTGRP, VIQMFE)
**                          AND
**    Code Group - Problem / Damage (FEGRP, VIQMFE)
**    Or
**    Notification Item Short Text (FETXT, VIQMFE)
**   B. Cause sub tab
**    Code Group # Causes (URGRP, VIQMUR)
**    Or
**    Cause Text (URTXT, VIQMUR)
**   C. Action Taken sub tab
**    Code Group # Activities (MNGRP, VIQMMA)
**    Or
**    Activity Text (MATXT, VIQMMA)
**            Then, allow user to complete notification (NOCO).
CLEAR : L_VAR , L_COMP_TIME.
IF ( SY-TCODE EQ 'IW21' OR SY-TCODE EQ 'IW22' OR SY-TCODE EQ 'IW24' OR
      SY-TCODE EQ 'IW25' ).
   IF ( E_VIQMEL-IWERK = '061' ) OR ( E_VIQMEL-IWERK = '062' ).
     IF E_VIQMEL-QMART = 'M2'.
       L_VAR = E_VIQMEL-AUSZT.
       L_COMP_TIME = L_VAR / 60.
       IF L_COMP_TIME < 15.
         EXIT.
       ELSEIF L_COMP_TIME > 15..
*         IF ( T_VIQMFE-OTGRP IS INITIAL AND T_VIQMFE-FEGRP IS INITIAL ) OR ( T_VIQMFE-FETXT IS INITIAL ) .
*           MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
*         ENDIF.
         IF T_VIQMFE-OTGRP EQ '' OR T_VIQMFE-FEGRP EQ ''.
           IF T_VIQMFE-FETXT EQ ''.
             MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMUR[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMUR.
             IF T_VIQMUR-URGRP IS INITIAL .
               IF T_VIQMUR-URTXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMMA[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMMA.
             IF T_VIQMMA-MNGRP IS INITIAL .
               IF T_VIQMMA-MATXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
           ENDIF.
         ENDIF.
       ENDIF.
     ENDIF.
   ENDIF.
ENDIF.
<Added code tags>
Thank you so much in advance..
-Sudhish
Please use the code tags when you're posting any code snippet
Edited by: Suhas Saha on Jul 13, 2011 12:39 PM

Hi, I was thinking just like XVBAP and YVBAP values in the USEREXIT_SAVE_DOCUMENT.
Plz check u have x /y versions or tables like _old/ _new suffixes and then move the value accordingly.
otherwise there may be inconsistency.
Edited by: Prasenjit S. Bist on Jul 13, 2011 3:03 PM

How to paas internal table value

how to pass internal table first value to a variable plz help me

Hi dulla anjan prasad
   You can use the LOOP statement to process special loops for any internal table.
LOOP AT itab result condition.
statement block
ENDLOOP.
This reads the lines of the table one by one as specified in the result part of the LOOP statement. You can then process them in the statements within the LOOP - ENDLOOP control structure. You can either run the loop for all entries in the internal table, or restrict the number of lines read by specifying a condition. Control level processing is allowed within the loop.
The sequence in which the lines are processed depends on the table type:
·        Standard tables and sorted tables
The lines are processed according to the linear index. Within the processing block, the system field sy-tabix contains the index of the current line.
·        Hashed tables
As long as the table has not been sorted, the lines are processed in the order in which you added them to the table. Within the processing block, the system field sy-tabix is always 0.
You can nest LOOP blocks. When you leave the loop, sy-tabix has the same value as when you entered it. After the ENDLOOP statement, sy-subrc is zero if at least one table entry was processed. Otherwise, it is 4.
The loop may not contain any operations on entire internal tables that change the table. However, you should remember that even saving a global internal table with the LOCAL statement in a procedure is a change operation on the entire table, since it exchanges the table contents. When you call procedures within loops, you should therefore check that it does not change the entire internal table. If you change the table, the loop can no longer work properly.
If you insert or delete a table entry within a loop pass, it is taken into account in subsequent loop passes as follows:
·        If you insert a line after the current line, it will be processed in a subsequent loop pass.
·        If you delete a line after the current line, it will not be processed in a subsequent loop pass.
·        If you insert a line before or at the current line, the internal loop counter will be increased accordingly.
·        If you delete a line before or at the current line, the internal loop counter will be decreased accordingly.
If this information is usefull plz do reward points....
Message was edited by:
        ARUN

How to compare the table, constraint, stored proc, view between 2 schema ?

Hi All,
We have two schema : app_test & app_prod :
app_test is where user run acceptance test, and where we make correction etc
app_prod is where user prepare data for going live/production.
Now we need to make sure that :
table structure
stored proc
view
function
sequence
constraint ...
Is the SAME between the two schema : Is there any script that can automate the process ?
Thank you very much,
xtanto

You may use TOAD, OEM, and use "ALL_" views to compare.
And also, take a look into the duplicate thread on this forums.
How to compare two oracle database schemas
You can also check in the google for any free tools for this !!
Regards,
Sabdar Syed.

How to compare two tables in SSIS?

I am creating an SSIS package that will compare two tables and then insert data in another table.
Which tool shall I use for that? I tried to use "Conditional Split" but it looks like it only takes one table as input and not two.
These are my tables:
TABLE1
ID
Status
TABLE2
ID
Status
TABLE3
ID
STatus
I want to compare STATUS field in both tables. If Status in TABLE1 is "Pending" and in TABLE2 is "Open" then insert this record in TABLE3.

You can use MERGE command , Sorry cannot test it right now.
MERGE INTO tbl3
USING (SELECT tbl2.ID, tbl2.status,tbl1.status as st1 FROM tbl1 JOIN tbl2 ON tbl1.ID=tbl2.ID) AS t ON T.ID=tbl3.ID
AND t.status='OPEN' AND t.st1='pending'
WHEN NOT MATCHED
INSERT (status) VALUES (t.status)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to print the table values in fastest way?

Dear Friends,
I'm having table in my application and i need to print the table values. For that I used print() method to print the table values.
boolean complete = tableObj.print(mode, header, footer, showPrintDialog, null, interactive,
null);But, the time taken for displaying print dialouge box so late and printing operation is done very slowly.
Could anyone please tell me is there any better way and fastest way to print the table values?
Thanks in advance

Hi,
In the Module pool you will have fields. For those fields you have created the name also. Assign those name to work area and from there to internal table.
And for your requirement viceversa you need to done.
With Regards,
Sumodh.P

How to bind internal table values with RootUIElement(Table) from select Que

Hello Friends,
       In my view Layout,there r two Input fields ,Submit button and Table... My concept is when user posting values in two input fields and clicking submit button means the result(more than one values) should be displayed in Table...
     I written coding also but i dont know to bind internal table values with Table... My code as follows,
method onactionsearch .
   data:
     Node_Node_Flight                    type ref to If_Wd_Context_Node,
     Elem_Node_Flight                    type ref to If_Wd_Context_Element,
     Stru_Node_Flight                    type If_View1=>Element_Node_Flight ,
     itab TYPE STANDARD TABLE OF sflight.
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
   Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
@TODO handle not set lead selection
   if ( Node_Node_Flight is initial ).
   endif.
get element via lead selection
   Elem_Node_Flight = Node_Node_Flight->get_Element( ).
@TODO handle not set lead selection
   if ( Elem_Node_Flight is initial ).
   endif.
alternative access via index
Elem_Node_Flight = Node_Node_Flight->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Node_Flight is initial ).
endif.
get all declared attributes
   Elem_Node_Flight->get_Static_Attributes(
     importing
       Static_Attributes = Stru_Node_Flight ).
select * from sflight into CORRESPONDING FIELDS OF TABLE itab
WHERE carrid = Stru_Node_Flight-carrid and connid = Stru_Node_Flight-connid.
Node_Node_Flight->bind_table( new_items = itab ).
endmethod.
Plz reply me asap...!

Hi,
What I understood from your coding is...
* navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
You are reading values from the above node and binding the values to the same node.Am i right?
Did you take seperate context node for your input fields or binded the above context to the fields.If not then read the context attribute values which are binded to the carrid and connid then pass these values to select query.
One more thing is select cardinality 1..n for node NODE_FLIGHT since you are displaying more than one record.
Go through the some basic tutorials.Search in sdn you will it get.Already there is a tutorial in sdn which explains exactly what do you require.
Go throgh this link
Web Dynpro for ABAP: Tutorials for Beginners
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Edited by: suman kumar chinnam on Mar 26, 2009 10:50 AM

How to compare the date value with the date datatype column?

Hi,
I am executed a query to get output for the particular date in two different database.
I got output in one db environment, but in the another environment i didnt get the output.
APP_DECISION_DATE column contains date datatype
ex:
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE = TO_DATE('23-JAN-07',
'DD-MON-YY'); 2
DECISIONED_STAGE_ID DECISIONED_STAG
2006060106 SYSTEM
DATABASE - II
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE=
TO_DATE('31-JAN-2007','DD-MON-RRRR') and application_id=2007010028552;
no rows selected
in the same db i got the output while i used the TO_DATE(APP_DECISION_DATE)
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where TO_DATE(APP_DECISION_DATE)=
TO_DATE('31-JAN-2007','DD-MON-YYYY') and application_id=2007010028552; 2
DECISIONED_STAGE_ID DECISIONED_STAG
2006060113 SYSTEM
is it necessary to use TO_DATE function while i am using the data datatype column in the WHERE CLAUSE?
Thanks in advance.
siva

Sorry & thanks sathish,
Now i got the result.
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE BETWEEN TO_DATE ('31.01.2007 00:00:00', 'DD.MM.YYYY HH24:MI:SS') AND TO_DATE ('31.01.2007 23:59:59', 'DD.MM.YYYY HH24:MI:SS')
2 and application_id=2007010028552;
DECISIONED_STAGE_ID DECISIONED_STAG
2006060113 SYSTEM
================================
But one doubt,
When i created the column with the date datatype how it gets the time value,
And in one environment db i got the result but in another environment i dont get,
Shall i want to change any session status of date?

How to convert Internal table values to excel file

Hi Experts!!!
I have requirement to generate a Excel(.xls) file for a requirement. For this the final internal table values has to be moved to excel file. I have used function module "SAP_CONVERT_TO_XLS_FORMAT" to generate it to my local machine. But when i tried to generate the file in "AL11" folder its giving a dump. Ex(/sapia/iface/out/comm/saphr/test.xls). Can anyone please tell me is there anyother function modules or program to generate in sapia folder.
Thanks.
Ganesh R K

try to save as a tab delimited.

How to compare text box value with the table data??

Hello ALL,
I created one stored procedure in DB,it is as follows:-
CREATE or replace PROCEDURE chkUser
u in varchar2,
p in varchar2,
ap out varchar2
is
begin
select count(*) into ap from tbuser where loginid = u and password = p;
end;
And at the front end I have designed a form with 2 text boxes, now my question is I wanna compare these text box values(which user enters) with the data of the table....??? something like control (may be I am not sure)..... ???
If anybody can help me out with this issue...... help will be appreciated
Thank you.
regards,
Kumar

hi Elise,
I'm always getting the Error Message as "Invalid Creditianls"... let me tell you the whole scenario with sql synatx.
I have created tables as:-
CREATE TABLE "TBUSER"
(     "LOGINID" VARCHAR2(30) NOT NULL ENABLE,
     "PASSWORD" VARCHAR2(30),
     CONSTRAINT "TBUSER_PK" PRIMARY KEY ("LOGINID") ENABLE
than I created the Procedure on tbuser, it is as:-
create or replace PROCEDURE logincheck
u in varchar2,
p in varchar2,
ap out varchar2
is
begin
select count(*) into ap from tbuser where loginid = u and password = p;
end;
now at the front end side I have created one form with 2 text boxes (P8_USERNAME & P8_PASSWORD) and 2 buttons (Cancel and Submit)
as per you told me in the above post, I have created 'Validation' procedure with Type as 'Exists' and expression(into Validation Expression1)as:-
select 1 from tbuser
where loginid = :P8_USERNAME
and password = :P8_PASSWORD;
and
kept an error message as 'Invalid credentials'.....
but I don't know what's going wrong..... I do have few data into the table, and when I am entering the same data(with case sensitive) I am getting the Error message, rather than when the credentials are perfect user should be allowed to enter into the current page(where I have created this form and validation procedure)....
any idea what's going worng and where...????
thxs.... appreciated..
regards,
Kumar

How to store internal table value in single variable

hi gurus,
i have 3 value in int table , so want to store the value of int table into single variable of type string.
how it is possible

hmmm, your requirement is kinda weird and you could have given us a bit more info, but well lets start.
Why is your requirement weird?
Well an internal table kinda is a variable itself, or rather a set of variables which together make up for a line type of your table.
So you have a value you already have in a variable and now want to store it in anotherone? Seems weird.
What type is your internal table?
Do you have those three values in one record or in three records which only hold one value each?
Which of your values do you want to store in another variable?
Anyway, make a F1 on the "READ TABLE" statement, this should definiteley help you.
The "LOOP AT WHERE" statement could as well help if there should occur probrlem using READ TABLE.
/edit DAMn i was posting this while you gave us more info.
So still the question stays if you got your three values in one record or in three records.
DATA: lv_variabl_containing_all type char100.
loop at itab into wa.
concatenate lv_variabl_containing_all wa-value into lv_variabl_containing_all seperated by space.
endloop.
after the loop you now got all your values in lv_variabl_containing_all.
That is for the case you got three records.
other case would be
Read table itab into wa index 1.
concatenate wa-value1 wa-value2 wa-value3 into lv_variabl_containing_all.
Edited by: Florian Kemmer on Apr 16, 2010 12:59 PM

How to compare 2 table values

Similar Messages

Maybe you are looking for