How to compute maximum user per AP

Hi Guys,
Im setting up my WLAN, im confused because i dont know how do i compute the maximum user per client per AP. Im using AP 1020 series. For example if i have 20 clients if 802.11b,c,a how's the bandwith is being affected when the number of user is increasing.
Thanks,
Jong

Hi Jong,
Here is a cisco doc that relates to this question;
Q. How many clients can associate to the AP?
A. The AP has the physical capacity to handle 2048 MAC addresses. However, because the AP is a shared medium and acts as a wireless hub, the performance of each user decreases as the number of users increases on an individual AP. Ideally, not more than 24 clients should associate with the AP because the throughput of the AP is reduced with each client that associates to the AP.
From this Q&A doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Have a look at this great thread that has some "Real World" answers from
Scott,Matthew,Mark and Emily (one of my all time favourite questions);
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddb85ec/0#selected_message
Hope this helps!
Rob

Similar Messages

  • How to setup maximum answers per training ?

    Dear All,
    I am using Formscentral for Training Invitations.
    I setup the cities, the dates and the time
    The invited persons can choose his personal training session.
    The problem or the solution I am looking for is: I want to setup the maximum attendees per session.
    E.g.: the maximum attendees could be 10 persons. So if 10 persons registered to session A, the next person can only choose session B because session A is closed based on maximum numbers of attendees.
    How to mange this by Formscentral ?
    Would be nice if anybody have a or THE solution...
    Regards
    Christian

    Hi,
      Sorry we currently do not support what you descirbed above.
    If you like, please enter your suggestions/feature request here: https://adobeformscentral.com/?f=XnF-KJVCovcEVQz9tZHYPQ#
    Thanks,
    Lucia

  • How to find maximum number of users we can assign for Hyperion Planning.

    HI,
    How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
    In Essbase propreties, the system is showing maximum planning users could be 65535.
    what would be the number for concurrent scenario?
    Thanks
    Giri
    Edited by: Giriprasad on Jun 18, 2012 2:18 AM

    The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How do you share photos on the same computer between users???

    Hello,
    I would like to know how to share photos on the same computer between users...
    My wife and I have different user accounts on our iMac and I can't figure out how to share photos.
    I tried everything as told by Apple but it seems you can only share photos on your iMac with a network. If that is what I understand...
    I just want to have all the photos on my user account and when my wife is on her user account I want her to be able to view the photos.
    Again, we are only using one iMac.
    Thank you for your help in advance...

    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

  • How to read the data from a file in another computer with user name and password login

    How to read read the data from a file in anohter computer which need to login with user name and password?

    duplicate post:  http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
    duplicate post:  http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
    duplicate post   http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

  • How can all the users in my computer (my kids) have access to all the photos I have in I Photo?

    How can all the users in my computer (my kids) have access to all the photos I have in I Photo? My photos only appear when I (the administrator) log into the computer. I want my kids to be able to access them also.

    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

  • How to Control with Maximum Record per Page

    Hi Every one
    how can I control with maximum record per page with parameter sending from Form
    ex.
    if I set parameter with value=15 the report will run 15 rows per page ?
    Can anyone help me Please ASAP ?
    Thankx

    PLay around with SRW.SETMAXROW , from memory that should do the trick.
    Cheers.
    N.

  • How many workbooks have been visited by end users per day

    Hi SDN's,
    How many workbooks have been visited by end user per day.Is there any process to knew... Do we have any T-Codes to knew...
    Thanks & Regardz,
    Aluri

    nope... unless you're in 7.0
    the statistics before 7.0 only check queries... workaround would be to have a report on BW statistics filtering on the queries that are in your workbooks... that might give you an "idea", but if there people who run those queries outside of the workbook, it will "affect" your "statistics"

  • Maximum number of users Per Conference on monthly reports

    Can anyone has SQl query to fetch the maximum number of users per conference in Lync 2010 on monthly basis .
    in monitoring report this report is not coming so please give some workaround .
    Ashwani Thapa

    Have you seen this? http://blogs.technet.com/b/rischwen/archive/2014/01/17/per-user-conference-joins-grouped-by-uritype-sql-query.aspx
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How many workbooks have been visited by end user per day

    <i><b>  Hi SDN's,</b></i>
    How many workbooks have been visited by end user per day.Is there any process to knew...
    <i><b>Thanks & Regardz,
    Aluri</b></i>

    Hi Aluri,
    Statistics are usually not available on workbooks. You can find out how many time a user calls up a particular query (which can be accessed by various workbooks). Because workbooks themseleves do not call up data from the infoproviders.
    You can tell how many times a user has accessed a query by looking at the Statistical queries and objects. Try the following two there is a list of other queries in help that you can go through also:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm

  • How to know the active users per HRMS module?

    Dear all,
    I am looking for a good way to find the number of concurrent active users per HRMS modules like payroll , human resources, etc ...
    What is the best way to do that calculation?
    Kindly advice,
    Thank you and best regards,
    C.

    See the old posts..
    Re: USERS CONNECTED
    Re: No of Apps users log-in.
    Hope this helps,
    http://www.oracleracexpert.com
    IPC Send timeout issue and Solution
    http://www.oracleracexpert.com/2009/09/ora-29740-evicted-by-member-0-group.html
    Unable to start RAC instance after applying patch.
    http://www.oracleracexpert.com/2010/03/unable-to-start-rac-instance-after.html

  • How to delete a user in SAP-CPS Version 7.0

    Hello,
    I created my users via UME ( User Management Engine of Java Application server). Unfortunately I used the wrong name convention, so I had to recreate all the users in UME. Afterwards I delete all wrong users in UME.
    Than I tried to login with my new user in SAP-CPS (users are normally created in SAP-CPS during first login) but I get the error message that I reached the maximum number of 10 users allowed in the basic version. No problem I thougt, I simply delete the wrong ones in SAP-CPS. But I do not know how to delete a user! I could not find any menu item or any describtion in the manualls how to delete an user in SAP-CPS.
    I remove the users from any Isolation group, I disabled all the users but still I could not find any way to delete them.
    Has any body a hint for mor.
    Kind regards
    Frank Morleo

    Hello Anton,
    deactivating the unused users made it possible to login with the new ones. 
    Thanks for your help.
    Now I have to find out how to clear the deactivated users from the list.
    Regards
    Frank

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • How to Move Local Users to Network Domain Users

    Before you follow these instructions...... I'm a rank amateur so I'd check to see if the smart kids have corrected my errors or improved on the method in the replies below
    The reason for the post is I have good and established local user accounts on all the computers and moving them to domain controlled accounts is the one topic I could not find a script to follow that worked for my low level of knowledge of OS X.
    Let me first explain my setup and needs. I'm replacing a Windows Home Server (WHS) with the Mac Mini Server. My goal was to have the Mac Mini as the server holding all our photos, data, etc. and running a user account to run the family iTunes account to feed the Apple TV and be the backup / sync point for a family sized set of iPod Touches, iPads and iPhones. I want to be able to log into each mac and have the same information setting, links, etc........ basically walk around the house, find any mac shaped device not used by someone else, log in and carry on where I was before -  with the MacBook Air having a portable account so it can come travelling with us.
    The key hardware is...
    Mac Mini Server running Snow Leopard 10.6.8
    Apple TV
    2 x iMac Running Lion 10.7.1 [upgraded from 10.6.8]
    MacBook Air running Lion 10.7.1 [upgraded from 10.6.8]
    Normal stuff like wifi, hubs and a router doing the DHCP (and for me reserving IP addresses based on the 'MAC Address' to save me having to manually configure all the IP addresses)
    Key Resources I used as I learnt how to do this; to level set you all, I'm a relative newcomer to OS X having had a Windows life with Linux for fun, so i'm not a mac or IT specialist but like to play around.
    Apple's podcast series 'Apple Quick Tour of Leopard Server'  - this is great, it informed me and kept me motivated through all the bah moments, all 33 episodes and it's in the iTunes store as a podcast.
    The book 'Mac OS X Snow Leopard Server For Dummies' - I bought this about half way through the whole process and wish i'd bought it earlier, my reccomendation would be get the Kindle version so you can search it for advice.
    The excellent information on DNS from Hoffman Labs http://labs.hoffmanlabs.com/node/1436
    The video 'Setting up a primary DNS zone.....' from Lynda.com on youtube  http://www.youtube.com/watch?v=OOEgQY9oFK4
    The Series of PDF document on Snow Leopard Server from Apple http://support.apple.com/manuals#mac%20os%20x%20server%20v10.6
    And finally this excellent post from Joe Ferrante which was the core of what I used http://joeferrante.net/how-to-migrate-local-user-account-to-network-user-account -with-networked-home-folder-on-snow-leopard-server/
    Right off we go....
    Setting up the Server [this took me 6 goes to get it right as I learnt a little each time].
    So i'm not going to go through this step by step because it in the 'dummies' book and the videos from Apple above and those will be better than anything I write but here's my details/advice.
    I split the primary disc into 2 partitions using disk utility so I could reformat the operating system without moving my data.
    100GB for the OS X system
    400GB for user data
    Install OS X from the DVD, press the buttons based on your desires but stop at the bit about naming you computer titled Network Names
    READ UP ON DNS  - this one of the reason I had so many goes as it was the 1st time i've set up a server like this using DNS and guessing didn't get me there.
    If you don't have one buy a domain name for your network it make it much easier in the long run & is $10 well spent
    The name needs to be [the computer name].[your domain name].[com or net or org, etc]
    So if you want you computer to be called fred and you bought or have the domain location.com enter fred.location.com in the primary DNS name box
    This shoud automatically put fred in the computer name box.
    Follow along with the set up guide to finish
    After you have finished the set up test the DNS with NSLOOKUP in a terminal window
    nslookup fred.location.com    in my example and you should get the IP
    Add your servers IP address to the list of DNS servers in network preferences on the client mac.
    Bind [link] the client computers to the server in Accounts on the client computer - I used the 'dummies' book for this but there's lots of data on the web.
    Clean up the user profile on the client to reduce the size of the Home folder as much as possible or the data transfer is loooooooonnnnng - i also connect the iMac on a cable rather than wifi to speed it up.
    Read Joe's post http://joeferrante.net/how-to-migrate-local-user-account-to-network-user-account -with-networked-home-folder-on-snow-leopard-server/ and follow along.useful info I learnt somewhere - to get the paths to the folders correct in the terminal window go to the folder in Finder and then drag it to the terminal window and let go - this will put the correct link in the instruction.
    You now need to be on a terminal window on your server, with a finder window open and logged into the client as the user you are moving
    THE CLIENT COMPUTER NEEDS TO BE LOGGED OUT or logged in as a different user than the one you're trying to move.
    so when you're at the right point - type sudo cp -R then hit the space bar, drag the existing user folder onto the finder window, add the /* and hit space then find the users folder on the server and drag that onto the terminal window to complete the instruction.
    Hit enter and wait a while assuming it starts ok - i used network traffic on the Activity Monitor utility to check if it was working.
    If you got this far and it all worked - login to the profle you moved on any computer linked to the server or the server but not the original client computer to see if it worked and all your setting and data are intact and then delete the profile off the original client if it was ok [archiving the home directory took ages for me].
    As you can probably guess most of this was good learning for me and it worked successfully for me in the end, moving all my history, saved password, etc, etc without any problems.
    Hope this helps other in the same situation & feel free to expand or correct this if I've missed anything.
    Ed

    Hi,
    I was unable to access the Joe Ferrante information (it appears to now requrie a password and was not able to determine how a username and password were assigned)  Would you happen to have a copy of the post that you refer to above?
    I am still at the early stages of this process but am hoping that the steps you refer to are going to get me where I want to be.  Your stated end goal is where I hope to get to.
    Thanks,
    Sean

  • How to add multiple users to a role in ECC 6.0

    How to add multiple users (say 1000) to a role in ECC 6.0?

    Hi
    You can actually add multiple users to a role using transaction SU01. From SU01, use the menu Environment->Mass Changes.
    Here you can manually add the users, select them by address or authorisation data. Once you have your user list, you can then add or remove roles and/or profiles.
    Secondly , You can use SU10 to do mass changes to multiple users including role assignments per logical systems
    Also check the following link:
    http://www.sap-img.com/bc021.htm
    I hope this should do it
    regards
    Chen

Maybe you are looking for