How to conect to remote ActiveX (COM) program
Hi everybody.
I want to comunicate between LabView and another program by using ActiveX (COM).
If both - LabView and the other program is at my local machine - everything is fine.
I use the "Automation Open"-VI to open the ActiveX conection.
The problem is that if the other program is located at another PC (inside network) the "automation Open" -VI returns an error.
How can I get an ActiveX connection to the other PC?
Thanks for help.
Best regards.
RonnyMessage Edited by rfriedr1 on 05-23-2005 10:00 AM
I'm afraid it isn't quite that easy. From LV all you need to do is specify the machine name to get the remote access. However, in order for that to work, all of the COM stuff must be configured correctly for remote access (DCOM) and all the security settings must be done correctly. And if you are running XP SP2 or 2003 Server, there are additional steps to take because those OS's have tightened up security and thus have additional steps to get it to work.
SUMMARY
=======
If you don't know much about COM or don't have access to a COM guru that created the COM component you are trying to use, you might want to think about creating a little LV app that runs on the remote box and then use LV networking to remotely access it. DCOM isn't impossible, but it isn't easy - especially if you don't have a good grounding in non-LV COM interfacing.
DETAILS
=======
Is the COM object you are trying to access a home grown one or 3rd party? Are the two computers both in the same NT Domain or are they in Workgroup configuration? DCOM uses NT security and thus you typically need to have both computers in the same domain and using a domain credential for communication.
I'm afraid I can't give you step by step instructions on how to do this (I haven't needed to use DCOM in about 6 years) - but there are a lot of resources out on the web and books like Don Box's "Essential COM" walk you through most of it. For example, here are some references to look at
http://support.microsoft.com/kb/176799/EN-US/
http://support.microsoft.com/kb/158508/EN-US/
Oh, and this might be handy - ran across this while looking for links for you...
http://support.microsoft.com/default.aspx?scid=kb;en-us;249726
Brian Tyler
http://detritus.blogs.com/lycangeek
Similar Messages
-
How to call a remote external c++ program from a local java program?
local java program pass some parameters to a remote C++ program and get the result from that C program output.
You could use a tcp/ip connection (e.g. with Sockets), and pass the parameters as Strings in the socketstream.
-
CHAT SYSTEM HOW TO CONECT TO REMOTE PC
How to add connecttion to another device
This question is too general. Connecting to another computer is a common problem and therefore there are plenty of articles on the Internet with solutions to this problem depending upon your needs. Please google for an answer. If you
have a specific issue then we can help you but this question is to general for an answer. -
How to get the entry point in the ActiveX/COM adaptor
below is the description of the Demo of using the ActiveX/COM to call new seq .
API Demo
1. Manually add a Message Popup step to the MainSequence of a
new sequence file. Save the sequence file as launch.seq.
2. Create another sequence file and save the file as caller.seq.
3. In the MainSequence of the caller.seq file, add Action steps
using the ActiveX/COM Adapter to call into the TestStand API and
launch the launch.seq file in a new execution.You might need the
following two methods to complete this step.
. Engine.GetSequenceFileEx
. Engine.NewExecution
so the question as follows:
1.i call the method of get sequencefileEx
2. call the method of getmodlesequenceFile
3.call the method of evalEntryPointNameExpression
4.call the method of NewExecution.
but at the step of 3. i haven't get the entry point.
so how to solve this issue? thanks
Attachments:
QQ图片20140115200924.jpg 58 KB
QQ图片20140115201708.jpg 100 KBThis is a duplicate post of this:
http://forums.ni.com/t5/NI-TestStand/How-to-get-the-entry-point-in-the-ActiveX-COM-adaptor/m-p/27005... -
How to run a remote application (Non Java) from a Java program
Could you please tell me how to run a remote application (Non-Java) from a Java program without using RMI. Please tell me know the procedure and classes to be used.
Cheers
Ramwhat do you mean remote application.In the other pc or in your pc just apart from you application?
If the application is in your pc,the method which the upper has mentioned is
a good one!
But if the application you want to run is not in your computer,the method can't do. And you can use socket with which you can build an application listening some port in the pc which contains the application you want to run .When you want to run that application ,send the Start_Command to the listening application.Then listening application will run the application with the help of the method the upper mentioned. -
Survey - How do you run Remote Manager?
Greetings,
We recently upgraded to Exchange 2010 and I'm running across the issue that many other people are.. what to do with Remote Manager. I'm just wondering how other people keep Remote Manager running? I know some people use Java Service Wrapper, but there seems to be a lot of discussion around how well that truly works. I'm just also wondering if there are a lot of companies that keep an account logged into your machine to keep Remote Manager running? Just looking for options on how to run this program without costing the company additional dollars.
Thanks in advance,
Ryansimple
instead of making remote manager as an accouunt specific process..make it a system specific process.
so when u log off it still be running.
there are ways you can add it to services
try this http://www.tacktech.com/display.cfm?ttid=197
Edited by: A Dhiman on Sep 19, 2011 5:21 AM -
Hi very urgent How to improve the performence of the program
Hi all please tell me how to improve the performence of this program......
REPORT z03_gil010 NO STANDARD PAGE HEADING LINE-SIZE 130.
INCLUDE *
INCLUDE: z00_bci010. " Gestion des anomalies.
Déclaration des données *
Tables de la bases de données *
TABLES:
ekpo, " Poste document d'achat.
lfa1, " Base fournisseurs (généralités).
marc, " Données division de l'article.
z03_bw_cmp1,
eord, "Répertoire des sources appro. Achats
eina, "Fiche infos-achats - données générales
t024, "Groupes d'acheteurs
tvarv. "FAE17345+
Déclaration des données internes *
Déclaration de la table interne qui permet de recuperer les mois.
DATA: BEGIN OF itb_months OCCURS 12.
INCLUDE STRUCTURE t247.
DATA: END OF itb_months.
Table pour récupération d'infos sur les divisions
DATA: BEGIN OF itb_t001w OCCURS 0,
werks LIKE t001w-werks,
fabkl LIKE t001w-fabkl," Clé du calendrier d'entreprise
END OF itb_t001w.
Déclaration de la table interne contenant les infos sur l'adresse du
fournisseur.
DATA: BEGIN OF itb_adresse OCCURS 0,
lifnr LIKE lfa1-lifnr, " Numéro de compte fournisseur.
name1 LIKE lfa1-name1, " Nom 1.
name2 LIKE lfa1-name2, " Nom 2.
name3 LIKE lfa1-name3, " Nom 3.
name4 LIKE lfa1-name4, " Nom 4.
stras LIKE lfa1-stras, " N° de rue et nom de la rue.
pstlz LIKE lfa1-pstlz, " Code postal.
ort01 LIKE lfa1-ort01, " Localité.
pfach LIKE lfa1-pfach, " Boîte postale.
pstl2 LIKE lfa1-pstl2, " Code de la boîte postale.
land1 LIKE lfa1-land1, " Clé de pays.
landx LIKE t005t-landx, " Pays.
spras LIKE lfa1-spras, " Code langue
END OF itb_adresse.
Déclaration d'une table interne pour les informations sur les
prévisions de commande.
DATA: BEGIN OF itb_prev_cde OCCURS 0,
werks LIKE marc-werks, " Division
idnlf LIKE eina-idnlf, " ADDsde ref article frn
lifnr LIKE eord-lifnr, " N° fournisseur.
ekgrp LIKE marc-ekgrp, " Groupe d'acheteurs
dispo LIKE marc-dispo, " Code gestionnaire MRP
matnr LIKE eord-matnr, " Article.
maktx LIKE makt-maktx, " Désignation article.
bstmi LIKE marc-bstmi, " Quantité de commande.
men00 LIKE plaf-gsmng, " Quantité du mois en cours M.
men01 LIKE plaf-gsmng, " Quantité pour le mois M+1.
men02 LIKE plaf-gsmng, " Quantité pour le mois M+2.
men03 LIKE plaf-gsmng, " Quantité pour le mois M+3.
men04 LIKE plaf-gsmng, " Quantité pour le mois M+4.
men05 LIKE plaf-gsmng, " Quantité pour le mois M+5.
men06 LIKE plaf-gsmng. " Quantité pour le mois M+6.
DATA: END OF itb_prev_cde.
Structure de travail pour les commandes convernant les PFC
DATA str_pca_pfc LIKE itb_prev_cde.
*add sde
DATA str_eord_pfc LIKE itb_prev_cde.
Structure de travail pour les prévisons PFC
DATA str_prev_pfc LIKE itb_prev_cde.
Déclaration d'une table interne pour les informations sur le
portefeuille des commandes d'achat.
DATA: BEGIN OF itb_pca OCCURS 0,
werks LIKE ekpo-werks, " Division
idnlf LIKE eina-idnlf, " ADDsde ref article frn
lifnr LIKE eord-lifnr, " N° fournisseur.
ekgrp LIKE marc-ekgrp, " Groupe d'acheteurs
dispo LIKE marc-dispo, " Code gestionnaire MRP
matnr LIKE eord-matnr, " Article.
maktx LIKE makt-maktx, " Désignation article.
ebeln LIKE ekes-ebeln, " Numéro du document d'achat.
ebelp LIKE ekes-ebelp, " Numéro de poste du document d'achat.
slfdt LIKE eket-slfdt, " Date de livraison statistique
eindt LIKE ekes-eindt, " Date de livraison indiquée dans la
" confirmation de la cde.
menge LIKE ekes-menge, " Quantité indiquée dans la confirma-
" tion de la commande.
attdu LIKE eket-wemng, " Portefeuille fournisseur.
netpr LIKE ekpo-brtwr, " Prix net du document d'achat dans
" la devise du document.
rtard TYPE i, " Retard en jours ouvres.
wemng LIKE eket-wemng, " Quantité de l'entrée de marchandise.
bldat LIKE mkpf-bldat, " Date inscrite sur la pièce/sur le
" document.
qtran LIKE ekes-menge, " Quantité en transit.
dtran LIKE ekes-eindt. " Date du dernier avis de transit.
DATA: END OF itb_pca.
DATA: w_i TYPE i, "Compteur
w_i_char(1) TYPE c, "Texte pour récupérer compteur
w_nm_zone(20) TYPE c, "Nom zone pour assign au field-symbols
w_nb_j TYPE i, "Nb de jours ouvrés jusqu'à fin mois
w_nb_j_tot TYPE i. "Nb de jours ouvrés du mois
FIELD-SYMBOLS: TYPE ANY.
Déclaration d'une table contenant les fiches info achat.
DATA: BEGIN OF itb_eina OCCURS 0,
matnr LIKE eina-matnr,
lifnr LIKE eina-lifnr,
idfnl LIKE eina-idnlf.
DATA: END OF itb_eina.
Déclaration d'une table contenant les infos groupe acheteur.
*DATA: BEGIN OF itb_t024 OCCURS 0,
ekgrp LIKE t024-ekgrp,
eknam LIKE t024-eknam,
ektel LIKE t024-ektel,
telfx LIKE t024-telfx.
*DATA: END OF itb_t024.
Déclaration d'une table pour le transfert du fichier.
DATA: BEGIN OF itb_transfert OCCURS 0,
col00(8), "division
col00bis(20), "Reference article
col01(18), "No article
col02(45), "libelle article
col021(17), "Groupe acheteur
col022(13), "gestionnaire
col03(17), "qte commandée ou No de commande
col04(13), "Mois 1 ou No poste cde
col05(20), "Mois 2 ou délai initial
col06(33), "Mois 3 ou délai négocié
col07(13), "Mois 4 ou qté cdée
col08(13), "Mois 5 ou qté attendue
col09(13), "Mois 6 ou Montant attendu
col10(13), "Mois 7 ou retard
col11(13), "qte partielle livree
col12(13), "date livraison partielle
col13(13), "qté en transit
col14(13). "date
DATA: END OF itb_transfert.
Déclaration d'une table contenant la liste des fournisseurs.
DATA: BEGIN OF itb_lifnr OCCURS 0,
werks LIKE marc-werks,
idfnl LIKE eina-idnlf,
lifnr LIKE eord-lifnr,
ekgrp LIKE marc-ekgrp,
spras LIKE lfa1-spras,
eknam LIKE t024-eknam,
ektel LIKE t024-ektel,
telfx LIKE t024-telfx.
DATA: END OF itb_lifnr.
Déclaration d'une structure pour la selection dans la table MSEG.
DATA : BEGIN OF itb_mseg OCCURS 0,
mblnr LIKE mseg-mblnr,
mjahr LIKE mseg-mjahr,
ebeln LIKE mseg-ebeln,
ebelp LIKE mseg-ebelp,
END OF itb_mseg.
déclaration d'une structure pour la selection dans EKPO.
DATA : BEGIN OF itb_ekpo OCCURS 0,
lifnr LIKE ekko-lifnr,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
menge LIKE ekpo-menge,
bpumz LIKE ekpo-bpumz,
bpumn LIKE ekpo-bpumn,
matnr LIKE ekpo-matnr,
werks LIKE ekpo-werks,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh, "Base de prix FAE17345+
ekgrp LIKE ekko-ekgrp, "AFT++
dispo LIKE marc-dispo, "AFT++
END OF itb_ekpo.
déclaration d'une structure pour la selection dans EKPO.
DATA : BEGIN OF itb_ekko OCCURS 0,
ebeln LIKE ekko-ebeln,
lifnr LIKE ekko-lifnr,
spras LIKE ekko-spras,
END OF itb_ekko.
déclaration d'une structure pour la selection dans EKES.
DATA : BEGIN OF itb_ekes OCCURS 0,
ebeln LIKE eket-ebeln,
ebelp LIKE eket-ebelp,
ebtyp LIKE ekes-ebtyp,
eindt LIKE ekes-eindt,
menge LIKE ekes-menge,
dabmg LIKE ekes-dabmg,
etens LIKE ekes-etens,
END OF itb_ekes.
déclaration d'une structure pour la selection dans EKET
DATA : BEGIN OF itb_eket OCCURS 0,
ebeln LIKE eket-ebeln,
ebelp LIKE eket-ebelp,
menge LIKE eket-menge,
wemng LIKE eket-wemng,
eindt LIKE eket-eindt,
slfdt LIKE eket-slfdt,
END OF itb_eket.
déclaration d'une structure pour la selection dans MKPF.
DATA : BEGIN OF itb_mkpf OCCURS 0,
mblnr LIKE mkpf-mblnr,
mjahr LIKE mkpf-mjahr,
bldat LIKE mkpf-bldat,
END OF itb_mkpf.
Déclaration d'une structure pour la sélection dans EORD.
DATA : BEGIN OF itb_eord OCCURS 0,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
lifnr LIKE eord-lifnr,
ekgrp LIKE marc-ekgrp,
dispo LIKE marc-dispo, "DE3K924352
disls LIKE marc-disls,
bstfe LIKE marc-bstfe,
bstrf LIKE marc-bstrf,
bstmi LIKE marc-bstmi,
bstma LIKE marc-bstma,
END OF itb_eord.
DATA : BEGIN OF itb_eordw OCCURS 0.
INCLUDE STRUCTURE itb_eord.
DATA : END OF itb_eordw.
Déclaration d'une structure pour la sélection dans MAKT.
DATA : BEGIN OF itb_makt OCCURS 0,
matnr LIKE makt-matnr,
spras LIKE makt-spras,
maktx LIKE makt-maktx,
END OF itb_makt.
Déclaration d'une structure pour la sélection dans EBAN.
DATA : BEGIN OF itb_eban OCCURS 0,
matnr LIKE eban-matnr,
werks LIKE eban-werks,
flief LIKE eban-flief,
lfdat LIKE eban-lfdat,
menge LIKE eban-menge,
bsmng LIKE eban-bsmng,
webaz LIKE eban-webaz,
ekgrp LIKE eban-ekgrp,
ebeln LIKE eban-ebeln,
banfn LIKE eban-banfn,
bnfpo LIKE eban-bnfpo, "DB3K900702+
END OF itb_eban.
Déclaration d'une structure pour la sélection dans PLAF.
DATA : BEGIN OF itb_plaf OCCURS 0,
plnum LIKE plaf-plnum, "DB3K900702+
matnr LIKE plaf-matnr,
plwrk LIKE plaf-plwrk,
flief LIKE plaf-flief,
pedtr LIKE plaf-pedtr,
gsmng LIKE plaf-gsmng,
webaz LIKE plaf-webaz,
END OF itb_plaf.
Déclaration d'une structure pour la sélection dans MARC.
DATA : BEGIN OF itb_marc OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
disls LIKE marc-disls,
bstrf LIKE marc-bstrf,
bstmi LIKE marc-bstmi,
bstma LIKE marc-bstma,
bstfe LIKE marc-bstfe,
ekgrp LIKE marc-ekgrp,
dispo LIKE marc-dispo,
END OF itb_marc.
DATA : BEGIN OF itb_marc_eord OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
strgr LIKE marc-strgr, "groupe de stratégie planif
END OF itb_marc_eord.
DATA : BEGIN OF itb_z03_bw_cmp1 OCCURS 0,
matnr LIKE z03_bw_cmp1-matnr,
werks LIKE z03_bw_cmp1-werks,
pdatu LIKE z03_bw_cmp1-pdatu,
plnmg LIKE z03_bw_cmp1-plnmg,
END OF itb_z03_bw_cmp1.
Begin change BNI <DE3K937051>
DATA : BEGIN OF itb_z03_bw_cmp2 OCCURS 0,
matnr LIKE z03_bw_cmp2-matnr,
werks LIKE z03_bw_cmp2-werks,
pdatu LIKE z03_bw_cmp2-pdatu,
plnmg LIKE z03_bw_cmp2-plnmg,
END OF itb_z03_bw_cmp2.
*End change BNI
DATA : BEGIN OF str_index1,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index1.
DATA : BEGIN OF str_index2,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index2.
DATA : BEGIN OF str_index3_eord,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index3_eord.
DATA : BEGIN OF str_index4,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index4.
DATA : BEGIN OF str_index5,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index5.
DATA : BEGIN OF str_index6,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index6.
DATA : BEGIN OF str_index7,
matnr LIKE eord-matnr,
werks LIKE eord-werks,
END OF str_index7.
Déclaration des variables de debut et de fin de mois.
DATA: w_debut_mois LIKE sy-datum,
w_debut_periode LIKE sy-datum,
w_fin_mois LIKE sy-datum,
w_fin_periode LIKE sy-datum.
Déclaration des variables pour les dates.
DATA: w_date0 LIKE sy-datum,
w_date1 LIKE sy-datum,
w_date2 LIKE sy-datum,
w_date3 LIKE sy-datum,
w_date4 LIKE sy-datum,
w_date5 LIKE sy-datum,
w_date6 LIKE sy-datum,
w_datejour LIKE sy-datum, "FAE15269
w_dat_da LIKE eban-lfdat,
w_dat_op LIKE plaf-pedtr,
w_mois0 LIKE t247-ltx,
w_mois1 LIKE t247-ltx,
w_mois2 LIKE t247-ltx,
w_mois3 LIKE t247-ltx,
w_mois4 LIKE t247-ltx,
w_mois5 LIKE t247-ltx,
w_mois6 LIKE t247-ltx,
w_lendemain LIKE sy-datum. "FAE17345+
Temoin d'un AR dans la commande d'achat.
DATA: w_temoin_ar.
Numéro de la confirmation de la commande
DATA : w_etens LIKE ekes-etens.
Déclaration des variables pour le nom des fichiers.
DATA: w_nom_fichier LIKE rlgrap-filename,
w_fichier LIKE rlgrap-filename,
w_racine LIKE rlgrap-filename,
w_file LIKE rlgrap-filename.
Déclaration d'une table interne pour le transfert.
DATA: BEGIN OF itb_trans OCCURS 0,
w_ligne(320).
DATA: END OF itb_trans.
Déclaration d'une variable pour rechercher les enregistrements vides.
DATA: w_compteur TYPE i,
w_compteur1 TYPE i,
w_compteur2 TYPE i,
w_retard TYPE i, " Retard en jours ouvres.
w_trouve_pfc TYPE c, "addsde
w_trouve_pfs TYPE c, "+DE3K937051
w_trouve TYPE c.
*Index pour les LOOP
DATA : w_index_ekpo LIKE sy-tabix,
w_index_ekes LIKE sy-tabix,
w_index_eket LIKE sy-tabix,
w_index_mseg LIKE sy-tabix,
w_index_eban LIKE sy-tabix,
w_index_plaf LIKE sy-tabix,
w_index_pca LIKE sy-tabix,
w_index_z03_bw_cmp1 LIKE sy-tabix,
w_index_z03_bw_cmp2 LIKE sy-tabix."+DE3K937051
RANGES : r_type_pfs FOR marc-strgr.
*fichier sur serveur +EDR231003
DATA : w_chemin LIKE filename-fileintern, "nom du fichier
w_date_fichier(12) TYPE c, "Date format DD_MM_AA
w_csv(307) TYPE c. "ligne du fichier format CSV
CONSTANTS: k_imputation_m LIKE eban-knttp VALUE 'M'. "FAE19001+
Description de l écran de sélection *
Paramètres "UTILISATION" *
Ouverture d'un block de sélection pour le(s) fournisseur(s).
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-bl1.
Sélection division(s)
SELECT-OPTIONS: s_werks FOR ekpo-werks.
Sélection fournisseur(s).
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr OBLIGATORY.
Sélection du Groupe d'acheteur
*SELECT-OPTIONS: s_ekgrp FOR marc-ekgrp. "-FAE26446
*SELECT-OPTIONS: s_dispo FOR marc-dispo. "-FAE26446
SELECTION-SCREEN END OF BLOCK block1.
FAE 26446 : ajout
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-bl3.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_ekgrp RADIOBUTTON GROUP g3.
SELECTION-SCREEN COMMENT 5(24) text-001 FOR FIELD p_ekgrp.
SELECT-OPTIONS: s_ekgrp FOR marc-ekgrp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_dispo RADIOBUTTON GROUP g3.
SELECTION-SCREEN COMMENT 5(24) text-002 FOR FIELD p_dispo.
SELECT-OPTIONS: s_dispo FOR marc-dispo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block3.
FAE 26446 : fin ajout
Paramètres "SYSTEME" *
Saut de 2 lignes.
SELECTION-SCREEN: SKIP 2.
Ouverture d'un block de sélection pour l'adresse physique du fichier.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-bl2.
PARAMETERS: p_pc RADIOBUTTON GROUP rad1 DEFAULT 'X', "+EDR231003
p_fic_pc LIKE rlgrap-filename. "+EDR231003
SELECTION-SCREEN SKIP. "+EDR231003
PARAMETERS : p_serve RADIOBUTTON GROUP rad1, "+EDR231003
p_fic_se LIKE filename-fileintern "+EDR231003
DEFAULT 'Z03_PREV_COMMANDES'. "+EDR231003
SELECTION-SCREEN END OF BLOCK block2.
Logique de traitement *
INITIALIZATION *
INITIALIZATION.
Date du jour
MOVE sy-datum TO w_datejour. "FAE15269
Gestion des anomalies.
MOVE text-lb1 TO w_lb_traitement.
PERFORM f930_init USING sy-cprog '30'.
Fin de la gestions des anomalies.
Récuperation des mois dans la table interne 'ITB_MONTHS'.
CALL FUNCTION 'MONTH_NAMES_GET'
EXPORTING
language = sy-langu
TABLES
month_names = itb_months
EXCEPTIONS
month_names_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Récupération des differentes periodes.
PERFORM f100_recuperation_date TABLES itb_months.
Récupération du debut du mois.
CONCATENATE sy-datlo(6) '01' INTO w_debut_mois.
MOVE: w_debut_mois TO w_debut_periode.
Récupération du dernier jour du mois.
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
EXPORTING
day_in = sy-datlo
IMPORTING
last_day_of_month = w_fin_mois
EXCEPTIONS
day_in_no_date = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TOP-OF-PAGE *
TOP-OF-PAGE.
CALL FUNCTION 'Z_00_BC_TOP_OF_PAGE'
EXPORTING
p_linsz = k_ligne
p_pagno = sy-pagno
p_prog = sy-cprog
p_projet = k_projet
p_societe = k_societe
p_sujet = sy-title.
END-OF-PAGE *
END-OF-PAGE.
AT SELECTION-SCREEN *
FAE 26446 : ajout
AT SELECTION-SCREEN ON BLOCK block3.
IF NOT ( s_ekgrp IS INITIAL )
AND NOT ( s_dispo IS INITIAL ).
MESSAGE e394(z03_mm).
ENDIF.
IF p_ekgrp = 'X'.
IF s_ekgrp IS INITIAL.
MESSAGE e395(z03_mm).
ENDIF.
ELSE.
IF s_dispo IS INITIAL.
MESSAGE e396(z03_mm).
ENDIF.
ENDIF.
fae26446 fin ajout
AT SELECTION-SCREEN ON BLOCK block2.
IF p_pc = 'X'.
IF p_fic_pc IS INITIAL.
*Attention, il n'y a aucune adresse de sauvegarde pour le(s) fichier(s)
MESSAGE e021(z03_mm).
ENDIF.
ELSE.
IF p_fic_se IS INITIAL.
*Attention, il n'y a aucune adresse de sauvegarde pour le(s) fichier(s)
MESSAGE e021(z03_mm).
ENDIF.
ENDIF.
Création du matchcode pour la selection du fichier local.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fic_pc.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = p_fic_pc
def_path = 'C:'
mask = text-ma1
mode = 'S'
title = text-sel
IMPORTING
filename = p_fic_pc
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc NE 0 AND sy-subrc NE 3.
MESSAGE e032(z03_mm).
ENDIF.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM select_donnees.
=================================================
Liste des ARTICLES impactés pour les prévisions *
=================================================
===================================
PORTEFEUILLE DE COMMANDES D'ACHAT *
===================================
Construction itb_pca à partir de EKKO/EKPO.
w_index_ekpo = 1.
w_index_ekes = 1.
w_index_eket = 1.
w_index_mseg = 1.
SORT itb_ekko BY ebeln. "-FAE26446
SORT itb_ekpo BY ebeln ebelp.
SORT itb_makt BY matnr spras.
SORT itb_eket BY ebeln ebelp.
SORT itb_ekes BY ebeln ebelp.
SORT itb_mseg BY ebeln ebelp.
SORT itb_mkpf BY mblnr mjahr.
SORT itb_marc BY matnr werks. "+FAE26446
FAE 26446 remplacement
LOOP AT itb_ekko.
LOOP AT itb_ekpo.
FROM w_index_ekpo.
IF itb_ekko-ebeln = itb_ekpo-ebeln.
LOOP AT itb_ekpo.
READ TABLE itb_marc WITH KEY
matnr = itb_ekpo-matnr
werks = itb_ekpo-werks BINARY SEARCH.
CHECK sy-subrc = 0.
FAE 26446 fin remplacement
itb_pca-ebeln = itb_ekpo-ebeln.
itb_pca-ebelp = itb_ekpo-ebelp.
itb_pca-lifnr = itb_ekko-lifnr. "-FAE26446
itb_pca-lifnr = itb_ekpo-lifnr. "+FAE26446
itb_pca-ekgrp = itb_ekpo-ekgrp. "+FAE26446
itb_pca-dispo = itb_ekpo-dispo. "+FAE26446
itb_pca-matnr = itb_ekpo-matnr.
itb_pca-werks = itb_ekpo-werks.
Recherche du libellé article
READ TABLE itb_makt
WITH KEY matnr = itb_ekpo-matnr
spras = text-fra
BINARY SEARCH.
IF sy-subrc = 0.
itb_pca-maktx = itb_makt-maktx.
ELSE.
READ TABLE itb_makt
WITH KEY matnr = itb_ekpo-matnr
spras = text-ang
BINARY SEARCH.
IF sy-subrc = 0.
itb_pca-maktx = itb_makt-maktx.
ENDIF.
ENDIF.
IF NOT itb_ekpo-bpumn IS INITIAL.
itb_pca-menge = itb_ekpo-menge * itb_ekpo-bpumz /
itb_ekpo-bpumn.
ENDIF.
Sélect° ds la table EKES des dates de livraisons et des qtés
en transit
CLEAR w_temoin_ar.
CLEAR w_etens.
LOOP AT itb_ekes
FROM w_index_ekes.
IF itb_ekes-ebeln = itb_ekpo-ebeln
AND itb_ekes-ebelp = itb_ekpo-ebelp.
IF itb_ekes-ebtyp = text-arn.
itb_pca-eindt = itb_ekes-eindt.
w_temoin_ar = 'X'.
ELSE.
Si c'est une qté en transit alors on recupere
la quantité et la date.
IF itb_ekes-dabmg < itb_ekes-menge.
itb_pca-qtran = itb_pca-qtran + itb_ekes-menge -
itb_ekes-dabmg.
ENDIF.
IF itb_ekes-etens > w_etens.
w_etens = itb_ekes-etens.
itb_pca-dtran = itb_ekes-eindt.
ENDIF.
ENDIF.
ELSEIF itb_ekes-ebeln > itb_ekpo-ebeln
OR ( itb_ekes-ebeln = itb_ekpo-ebeln
AND itb_ekes-ebelp > itb_ekpo-ebelp ).
w_index_ekes = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
S'il n'y a pas d'AR alors récupérat° de la date livraison dans EKET.
LOOP AT itb_eket
FROM w_index_eket.
IF itb_eket-ebeln = itb_ekpo-ebeln
AND itb_eket-ebelp = itb_ekpo-ebelp.
IF w_temoin_ar IS INITIAL.
itb_pca-eindt = itb_eket-eindt.
ENDIF.
itb_pca-slfdt = itb_eket-slfdt.
Calcul du portefeuille fournisseur à partir de la
qté commandée et la qté reçue
itb_pca-attdu = itb_pca-attdu + itb_eket-menge -
itb_eket-wemng.
Calcul du montant du poste
itb_pca-netpr = itb_ekpo-netpr * itb_pca-attdu.
IF itb_ekpo-peinh NE 0.
itb_pca-netpr = itb_pca-netpr / itb_ekpo-peinh.
ENDIF.
Calcul quantité réceptionnée.
itb_pca-wemng = itb_pca-wemng + itb_eket-wemng.
Calcul du retard en nombre de jours calendaires
Le calcul du retard ne doit pas prendre en compte
le jour de livraison
ADD 1 TO itb_eket-eindt.
IF NOT itb_pca-attdu IS INITIAL
AND itb_eket-eindt LT sy-datum.
Calcul du retard en nombre de jours ouvrés
CLEAR w_retard.
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
EXPORTING
date_deb = itb_eket-eindt
date_fin = sy-datum
IMPORTING
jours = w_retard.
itb_pca-rtard = itb_pca-rtard + w_retard .
ENDIF.
ELSEIF itb_eket-ebeln > itb_ekpo-ebeln
OR ( itb_eket-ebeln = itb_ekpo-ebeln
AND itb_eket-ebelp > itb_ekpo-ebelp ).
w_index_eket = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
Recherche de la derniere date de livraison.
LOOP AT itb_mseg
FROM w_index_mseg.
IF itb_mseg-ebeln = itb_ekpo-ebeln
AND itb_mseg-ebelp = itb_ekpo-ebelp.
READ TABLE itb_mkpf
WITH KEY mblnr = itb_mseg-mblnr
mjahr = itb_mseg-mjahr
BINARY SEARCH.
IF sy-subrc = 0.
IF itb_mkpf-bldat > itb_pca-bldat.
itb_pca-bldat = itb_mkpf-bldat.
ENDIF.
ENDIF.
ELSEIF itb_mseg-ebeln > itb_ekpo-ebeln
OR ( itb_mseg-ebeln = itb_ekpo-ebeln
AND itb_mseg-ebelp > itb_ekpo-ebelp ).
w_index_mseg = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
APPEND itb_pca.
CLEAR itb_pca.
FAE26446 suppression parag. suivant
ELSEIF itb_ekpo-ebeln > itb_ekko-ebeln.
w_index_ekpo = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
Fin FAE26446
ENDLOOP.
=========================
PREVISIONS DE COMMANDES *
=========================
SORT itb_eord BY matnr werks lifnr ekgrp.
SORT itb_eban BY matnr werks flief ekgrp.
SORT itb_plaf BY matnr plwrk flief.
SORT itb_z03_bw_cmp1 BY matnr werks.
SORT itb_z03_bw_cmp2 BY matnr werks."+DE3K937051
SORT itb_pca BY matnr werks lifnr.
w_index_eban = 1.
w_index_plaf = 1.
w_index_z03_bw_cmp1 = 1.
w_index_pca = 1.
w_index_z03_bw_cmp2 = 1."+DE3K937051
Remplissage de la table des prévisions de commande.
LOOP AT itb_eord.
CLEAR: str_prev_pfc,
w_trouve.
MOVE-CORRESPONDING itb_eord TO str_index1.
MOVE-CORRESPONDING itb_eord TO str_index3_eord.
MOVE-CORRESPONDING itb_eord TO itb_prev_cde.
Recherche dans table division/article (MARC) afin de déterminer si
article PFS (prod fabriqué à stock) ou PFC (Prod fabriqué sur cde)
AT NEW werks.
READ TABLE itb_marc_eord
WITH KEY matnr = itb_eord-matnr
werks = itb_eord-werks
BINARY SEARCH.
IF sy-subrc NE 0.
CLEAR itb_marc_eord.
ENDIF.
ENDAT.
a - Prévisions pour les PFS : DA + OP *
*Calcul des quantités de commande.
IF itb_eord-disls = text-tl1.
itb_prev_cde-bstmi = itb_eord-bstfe.
ELSEIF itb_eord-disls = text-tl2
OR itb_eord-disls = text-tl3.
IF itb_eord-bstrf NE 0
AND itb_eord-bstmi = 0
AND itb_eord-bstma = 0.
itb_prev_cde-bstmi = itb_eord-bstrf.
ELSEIF itb_eord-bstrf NE 0
AND itb_eord-bstmi NE 0.
itb_prev_cde-bstmi = itb_eord-bstmi.
ELSEIF itb_eord-bstrf = itb_eord-bstma
AND itb_eord-bstrf NE 0
AND itb_eord-bstmi = 0.
itb_prev_cde-bstmi = itb_eord-bstma.
ENDIF.
ENDIF.
si article PFS (Prod fabriqué à stock) recherche des
demandes d'achat ou ordres planfiés
IF itb_marc_eord-strgr IN r_type_pfs.
Récupérat° calendrier de la division pour calcul correct lors de
l'ajout de eban-webaz ou plaf-webaz jours ouvrés
CLEAR w_trouve_pfs ."+DE3K937051
READ TABLE itb_t001w
WITH KEY werks = itb_eord-werks
BINARY SEARCH.
IF sy-subrc = 0.
LOOP AT itb_eban
FROM w_index_eban.
MOVE-CORRESPONDING itb_eban TO str_index2.
IF str_index1 = str_index2.
w_trouve_pfs = 'X'."+DE3K937051
si qte commandées pour la DA < quantité de la DA
IF itb_eban-bsmng < itb_eban-menge.
ajout de quantité de la DA - qte commandée pour la DA
PERFORM affect_da.
ENDIF.
ELSEIF str_index2 > str_index1.
w_index_eban = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
ajout des quantité des OP (ordres planifiés)
LOOP AT itb_plaf
FROM w_index_plaf.
MOVE-CORRESPONDING itb_plaf TO str_index4.
str_index4-werks = itb_plaf-plwrk.
str_index4-lifnr = itb_plaf-flief.
IF str_index4 = str_index3_eord.
Ajout de webaz jours ouvrés à pedtr
CALL FUNCTION 'Z_03_MM_ADD_TO_FACTORYDATE'
EXPORTING
i_date = itb_plaf-pedtr
i_calendar_id = itb_t001w-fabkl
i_nb_days = itb_plaf-webaz
IMPORTING
o_date = w_dat_op
EXCEPTIONS
conv_error = 1
OTHERS = 2.
IF sy-subrc
If forecasts found in Z03_BW_CMP2 for the article
IF w_trouve_pfs = 'X'."-DE3K937602
Recalculation prev month M in fct of Nb of wrought days of the month
IF NOT itb_prev_cde-men00 IS INITIAL.
one does not hold any more account of the day in progress
w_lendemain = w_date0 + 1.
CLEAR:w_nb_j,w_nb_j_tot. "DE3K938206+
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
EXPORTING
date_deb = w_lendemain
date_fin = w_fin_mois
IMPORTING
jours = w_nb_j.
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_MONTH'
EXPORTING
date = w_lendemain
IMPORTING
jours = w_nb_j_tot.
itb_prev_cde-men00 = itb_prev_cde-men00 * w_nb_j / w_nb_j_tot
*CLA DE3K925301 FAE27197
*to round has the higher entirety
itb_prev_cde-men00 = ceil( itb_prev_cde-men00 ). "DE3K938206-
ENDIF.
ENDIF."-DE3K937602
*End change BNI
b - Prévisions pour les PFC (Z03_BW_CMP1 puis rééquilibrage) *
Recherche des previsions dans Z03_BW_CMP1
si article PFC (Prod fabriqué sur cde) recherche des prévisions
IF NOT itb_marc_eord-strgr IN r_type_pfs.
CLEAR str_prev_pfc.
MOVE-CORRESPONDING itb_eord TO str_prev_pfc.
CLEAR w_trouve_pfc .
LOOP AT itb_z03_bw_cmp1
FROM w_index_z03_bw_cmp1.
MOVE-CORRESPONDING itb_z03_bw_cmp1 TO str_index7.
MOVE-CORRESPONDING itb_eord TO str_index6.
IF str_index6 = str_index7.
si on trouve des prévisions dans z03_bw_cmp1 pour la source
d'appro eord alors c'est un article PFC
w_trouve_pfc = 'X'.
CASE itb_z03_bw_cmp1-pdatu+0(6).
WHEN w_date0+0(6).
str_prev_pfc-men00 = itb_z03_bw_cmp1-plnmg.
WHEN w_date1+0(6).
str_prev_pfc-men01 = itb_z03_bw_cmp1-plnmg.
WHEN w_date2+0(6).
str_prev_pfc-men02 = itb_z03_bw_cmp1-plnmg.
WHEN w_date3+0(6).
str_prev_pfc-men03 = itb_z03_bw_cmp1-plnmg.
WHEN w_date4+0(6).
str_prev_pfc-men04 = itb_z03_bw_cmp1-plnmg.
WHEN w_date5+0(6).
str_prev_pfc-men05 = itb_z03_bw_cmp1-plnmg.
WHEN w_date6+0(6).
str_prev_pfc-men06 = itb_z03_bw_cmp1-plnmg.
WHEN OTHERS.
ENDCASE.
ELSEIF str_index7 > str_index6.
w_index_z03_bw_cmp1 = sy-tabix.
EXIT.
ENDIF.
ENDLOOP.
*Begin change BNI
Si des prévisions trouvées dans Z03_BW_CMP1 pour l'article
IF w_trouve_pfc = 'X'.
Recalcul prev mois M en fct du nb de jours ouvrés du mois
IF NOT str_prev_pfc-men00 IS INITIAL.
on ne tient plus compte du jour en cours
w_lendemain = w_date0 + 1.
CLEAR:w_nb_j,w_nb_j_tot. "DE3K938206+
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
EXPORTING
date_deb = w_lendemain
date_fin = w_fin_mois
IMPORTING
jours = w_nb_j.
CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_MONTH'
EXPORTING
date = w_lendemain
IMPORTING
jours = w_nb_j_tot.
str_prev_pfc-men00 = str_prev_pfc-men00 * w_nb_j / w_nb_j_tot.
*CLA DE3K925301 FAE27197
*arrondir a l'entier supèrieur
str_prev_pfc-men00 = ceil( str_prev_pfc-men00 ).
ENDIF.
Equilibrage PFC : commande/prévision du mois
Recherche COMMANDES cumulées pour M à M+6
CLEAR str_pca_pfc.
LOOP AT itb_pca
FROM w_index_pca.
MOVE-CORRESPONDING itb_pca TO str_index5.
IF str_index5 = str_index3_eord.
IF NOT itb_pca-menge IS INITIAL.
CASE itb_pca-eindt+0(6).
WHEN w_date0+0(6).
IF itb_pca-eindt >= w_date0.
str_pca_pfc-men00 = str_pca_pfc-men00 + itb_pca-menge.
ENDIF.
WHEN w_date1+0(6).
str_pca_pfc-men01 = str_pca_pfc-men01 + itb_pca-menge.
WHEN w_date2+0(6).
str_pca_pfc-men02 = str_pca_pfc-men02 + itb_pca-menge.
WHEN w_date3+0(6).
str_pca_pfc-men03 = str_pca_pfc-men03 + itb_pca-menge.
WHEN w_date4+0(6).
str_pca_pfc-men04 = str_pca_pfc-men04 + itb_pca-menge.
WHEN w_date5+0(6).
str_pca_pfc-men05 = str_pca_pfc-men05 + itb_pca-menge.
WHEN w_date6+0(6).
str_pca_pfc-men06 = str_pca_pfc-men06 + itb_pca-menge.
ENDCASE.
ENDIF."NOT itb_pca-menge IS INITIAL
ELSEIF str_index5 > str_index3_eord.
w_index_pca = sy-tabix.
EXIT.
ENDIF.
ENDLOOP."itb_pca
*. Equilibrer commande / prévision des mois : diminuer la quantité de
prévision de chaque mois par le portefeuille de commande client du
mois*. Si ce solde est négatif alors lui donner la valeur 0.
w_i = 0.
Ajustement commandes/prévisions pour les mois M à M+6
WHILE w_i .
Pour un mois, SI Prévisions > Commandes en cours
IF .
Prévisions = Prévisions - Commandes en cours
= 0.
ENDIF.
On passe au mois suivant
w_i = w_i + 1.
ENDWHILE.
MOVE str_prev_pfc-men00 TO itb_prev_cde-men00.
MOVE str_prev_pfc-men01 TO itb_prev_cde-men01.
MOVE str_prev_pfc-men02 TO itb_prev_cde-men02.
MOVE str_prev_pfc-men03 TO itb_prev_cde-men03.
MOVE str_prev_pfc-men04 TO itb_prev_cde-men04.
MOVE str_prev_pfc-men05 TO itb_prev_cde-men05.
MOVE str_prev_pfc-men06 TO itb_prev_cde-men06.
Hi
You check in SM50 by executing the programing, You will come to know which select is taking more time and accordingly you modify that select.
You can do SQL trace and Run time analysis and analyse and see.
check this and use
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji -
How to connect to remote server with jmx from jvisualvm
I have a WL 10.3.2 domain running on a single box. The adminserver and managed server are running on the same box, on different ports (7001 and 8001, respectively).
I have a Spring application deployed to the managed server and I've configured it to register a Spring bean as a JMX mbean.
When I run this entire configuration on my laptop, I can run jvisualvm and connect to my server and see and manipulate my registered mbean.
I'm having trouble figuring out how to get a remote connection working, however. I want to run jvisualvm on my laptop and connect to the remote server.
I first did "Add Remote Host", where I specified the IP address. It appears that this was created successfully, and it apparently was able to determine the DNS name for it.
I then tried to add a JMX connection. In the "Connection" field, I just entered the IP address followed by a colon and 8001 (managed server port number).
In the "Use security credentials" section, I entered the weblogic admin principal and credentials.
When I click OK, it chugs for a while and eventually gives up, saying:
Cannot connect to [email protected]:8001 using
service:jmx:rmi:///jndi/rmi://nn.nn.nn.nn:8001/jmxrmi
What might I be missing?I've resolved this. At least I was able to configure an authenticated connection. It doesn't use SSL yet, but I'm ok with that for a while.
Resolving this only required changing the command line parameters for the managed server, and being aware of the "jmxremote.access" and jmxremote.password" files. The following blog article helped a lot: [http://www.dzone.com/links/r/monitoring_your_java_application_with_jmx_part_2.html] .
I'm now passing the following command-line parameters:
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8888 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=true
The default "role" configured in "jmxremote.access" is "controlRole", and the "jmxremote.password" file specifies the credentials for that principal. I simply used that principal and credential in JVisualVM, and the connection succeeded.
And I just used the "host:port" form, not the protocol form.
Edited by: david.karr on Feb 4, 2011 12:47 PM -
I can print wirelessly in my office from my iPad, but how do I print remotely via the web to my HP ePrint printer. The printer is set up with an email access address but I don't know how to access it from my iPad.
Read through this for some information on how to do this:
http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devi ces-ipad-iphone.html -
How to Execute a Remote Procedure in Portal using Database Link
Hi,
I followed the instructions to create a Portal form for a remote procedure. But I am encountering the following error. Can someone advise what may be the cause?
Failed to execute - Missing string(create_package_body) language(us) domain (wwv) sub_domain (wwv_builder) (WWV-04300)
ORA-04020: deadlock detected while trying to lock object PUBLIC.PORTLET_SCHEMA (WWV-11230)
Failed to parse as PORTAL - (WWV-08300)
PURPOSE
How to execute a remote procedure in Portal using Database Link.
DESCRIPTION
This procedure assumes that you have two databases, one of which is remote, and Portal is configured in the other.
Remote Database A:
==================
1) Create a procedure as follows: Create or Replace PROCEDURE SCOTT.ADD_TWO_VALUES ( v_one IN NUMBER, v_two IN NUMBER, v_result OUT NUMBER) as begin v_result :=v_one+v_two; end; 2) Grant execute privileges to PUBLIC on the procedure.
Database B (where Portal is configured): ========================================
1) Create a public database link and choose to connect as a specific user (say SYSTEM). By default, in an Oracle 8i database, the "global_names" parameter in initSID.ora (or init.ora) file is set to "true". This Global Naming parameter enforces that a dblink has the same name as the database it connects to. Therefore, if the remote global database (A) name is "ora8.acme.com" then the database link should also be named as "ora8.acme.com".
2) Create a synonym for the procedure in Database A. Make sure you fully qualify the procedure name in the remote database (like SCOTT.ADD_TWO_VALUES).
3) Create a dynamic page to execute the procedure. The ORACLE tags in the dynamic page will look similar to the following: <ORACLE> DECLARE v_total NUMBER; BEGIN ADD_TWO_VALUES(:v_one,:v_two, v_total); htp.p('The total is => '); htp.p('<input type="TEXT" VALUE='||v_total||'>'); htp.para; htp.anchor('http://<machine.domain:port#>/pls/portal30/SCOTT.DYN_ADD_TWO_VALUES.show_parms', 'Re-Execute Procedure'); END; </ORACLE>
4) Portal does not have an option to create a form based on a synonym. Therefore, if you want to create a form instead of a dynamic page, create a wrapper procedure and then create a form based on this procedure. For example: Create or Replace PROCEDURE PORTAL30.ADD_TWO_VALUES_PR ( v_one IN NUMBER, v_two IN NUMBER, v_total OUT NUMBER) as begin add_two_values(v_one, v_two, v_total); end;
5) Grant execute privileges to PUBLIC on the procedure.hello...
any input will welcomed... Thanks.. -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
How to Compile & Deploy the Java Concurrent Program File
Hi,
There is a requirement to create the Java Concurrent Program in Oracle eBusiness. I am able to create the Java Concurrent Program file. But unable to do the following things:
1.Since it is custom file, which location I will deploy the file?
2. How to compile the file?
3. In the execution file path and executable file name what should I specify for JCP?
Please guide me.
ThanksPlease see (How to register and execute Java Concurrent Program ?in Oracle Applications R11i ? [ID 186301.1]) for the complete steps (i.e. define concurrent program and add it to the request group, .etc.) -- This is also applicable to R12.
You may also see:
Classpath Setting of Third Party Jar Files in R12 Java Concurrent Program (JCP) [ID 1292694.1]
Integrating Custom Applications with Oracle Applications [ID 176852.1]
Java Concurrent Program FAQ [ID 827575.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Program&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
How to create and call a COM component in Java
Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL -
How do we call smartforms in abap program or web services
how do we call smartforms in abap program or web services
How many types of smartforms are there?
points will be rewardedHi
See this sample program
Using the fun module smartform is called from the program
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
<b>call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'</b>
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function <b>FM_NAME</b>
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points for useful Answers</b>
Regards
Anji -
How to call a idoc in abap program and updates catsdb table
how to call a idoc in abap program and updates catsdb table
thank you,
Jagrut BharatKumar ShuklaHi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera
Maybe you are looking for
-
Open items displayed in FBL1N but not displayed during vendor payment
Hi gurus, Does anyone have any idea about this topic? When using FBL1N, I can display all my vendor items, but when I want to pay the vendor with f-53, the system tells me there are no open items, whereas I saw several of them in FBL1N. It does not s
-
i have a MacBook Pro 17" and i am looking for a driver so that i can use my Magic Mouse with at least the scrolling. Is there something out there for me to download. I am using Bootcamp and running Windows XP Pro. some help would be great. or if not
-
Color difference when using a different programs
I find this very odd, but now that I am using multiple program within the Creative Suite I am beginning to notice color differences. For instance, if I use hex: #200add in Photoshop it renders a different blue then in Illustrator or InDesign. Why is
-
How do I find all the tables that are used by an application component?
.
-
AE is connected but no audio output??
I use my AE to send audio output from iTunes to my stereo system and it was working fine until just recently. The Airport Utility shows that my iMac sees my AE, and the green line is shining on the AE, but there is no sound coming out of the stereo (