How to config failover beetwen 2 domain?

I have 2 Tuxedo domains, each have 2 machines run loadbalancing.
I want to know how to config failover in each domain
For Example:
Domain1:
192.168.100.101 (master)
192.168.100.102
Domain2:
192.168.100.111 (master)
192.168.100.112
I have some tpcall process from domain1 to domain2
How to config to:
When master server in domain2 die, they still work.
How to config domain gateway?
How to config NWADDR?
How to config alternative IP for failover?
Thank you very much.
AM

The best way to do this is to configure a domain gateway process on both the
master and non-master on each domain and use Domains-Level Failover and
Failback as documented at
http://e-docs.bea.com/tuxedo/tux90/add/addom.htm#1257891
If you also need to migrate application servers within a domain, you can
refer to "Migrating Your Application" at
http://e-docs.bea.com/tuxedo/tux90/ada/admigt.htm
If application servers on each domain are to be
<Debug Caster> wrote in message news:[email protected]..
I have 2 Tuxedo domains, each have 2 machines run loadbalancing.
I want to know how to config failover in each domain
For Example:
Domain1:
192.168.100.101 (master)
192.168.100.102
Domain2:
192.168.100.111 (master)
192.168.100.112
I have some tpcall process from domain1 to domain2
How to config to:
When master server in domain2 die, they still work.
How to config domain gateway?
How to config NWADDR?
How to config alternative IP for failover?
Thank you very much.
AM

Similar Messages

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

How to config management interface to an ethernet interface?

we have an ASA 5540 that require LAN port for failover. And the only available interface left is the management port. How to config management interface to an ethernet interface?

You can disable the management-only mode on that interface to make it as regualr routable port and use for any other purpose including LAN base failover purposes.
About management interface - 5510 but generally applies to management0/0 itself including 5540
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/intparam.html#wp1057800
configuring LAN base failover
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/intparam.html#wp1057800
Rgds
-Jorge

Can we put config.xml outside of domain directory?

Hi,
          I am currently working on Admin server failover under weblogic 8.1 clustering.
          I want to put config.xml outside of domain directory, if hosted machine of admin server is unreacheable, I want to build the admin server from another box using the config.xml we kept aside of domain directory.
          Idea is, All configuration files (startWeblogic.sh, config.xml etc.,) want to keep another box, we use these configuration files from admin server hosted machine. Please let me know, whether this is feasible? if so, Please suggest me solution.
          Thanks,
          Murthy P.

yes, we can place config.xml outside of domain directory.
          We have to include in startup script as,
          -Dweblogic.RootDirectory=/u/murthy/examples/config/
          Thanks,
          Murthy P

How to config JMS queues for non-AQueue products? Only config files?

Assume I have the requirement NOT to use Oracles built-in Aqueue JMS provider but use another (external)product like:
Apache ActiveMQ, JBossMQ, IBM MQseries,... instead.
Can I config these JMS products through OC4Js web browser config web pages as well or am I forced in such cases to use configuration through XML config files?
How do I tell OC4J NOT to use internal JMS Aqueue queues but use other JMS product?
Peter

"lilian zhu" <[email protected]> wrote:
>
Hi,
i am having a admin server running on port 7001 for servlet1 and managed
server
running on port 8001 for servlet2. how can config the httpd.conf to make
the apache
web server recongize both uri path?
i tried <IfModule mod_weblogic.c> WebLogicHost localhost WebLogicPort
7001</IfModule>
and <IfModule mod_weblogic.c> WebLogicHost localhost WebLogicPort 8001</IfModule>,
only can recongize port 8001.
i also tried WebLogicCluster localhost:7001,localhost:8001, doesn't work.
i would like to know, for my case, will the clustered server work, how
can i make
this working for non-clustered servers?
Thanks.
Lilian
Hi,
we have the same problem. We are running two non-clustered weblogic servers and
we want to configure only a failover
with the plugin.
We contacte the bea support but we haven't find a solution.
Greetings
Hans.

[OBPM 10gR3]How to configer a hybrid directory with Oracle LDAP Server

Hey, guys,
Does anyone have experience on configering a hybrid directory with Oracle LDAP Server? How to config the mapping conf file for Oracle LDAP in the directory of \OraBPMwlHome\conf?
Here is my conf file. But I got some LDAP mapping errors. It's really weird OBPM doesn't support Oracle's self LDAP, at least it does not provide the conf file.
-----------errors------------
Exception [javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '']. Reason: [LDAP: error code 53 - Function Not Implemented] fuego.directory.DirectoryRuntimeException: Exception [javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '']. at fuego.directory.DirectoryRuntimeException.wrapException(DirectoryRuntimeException.java:85) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.select(JNDIQueryExecutor.java:203) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.selectAllFromView(JNDIQueryExecutor.java:84) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.selectAllFromView(JNDIQueryExecutor.java:64) at fuego.directory.hybrid.ldap.Repository.selectAllFromView(Repository.java:54) at fuego.directory.hybrid.ldap.LDAPPollingEventGenerator.buildCurrentProxies(LDAPPollingEventGenerator.java:98) at fuego.directory.provider.notifiers.BasePollingEventGenerator.generateEvents(BasePollingEventGenerator.java:41) at fuego.directory.hybrid.HybridMultipleEventGenerator.generateEvents(HybridMultipleEventGenerator.java:43) at fuego.directory.provider.notifiers.DirectoryNotifier.notifyChanges(DirectoryNotifier.java:403) at fuego.server.service.DirectoryListener.updateEngineFromDirectoryImpl(DirectoryListener.java:309) at fuego.server.service.DirectoryListener$DirectoryPollingItem.execute(DirectoryListener.java:351) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.ejbengine.ejb.EngineStartupBean.executeItem(EngineStartupBean.java:192) at fuego.ejbengine.ejb.EngineStartupBean.updateFromDirectory(EngineStartupBean.java:172) at fuego.ejbengine.ejb.engine_startup_bpmengine_wodkyx_ELOImpl.updateFromDirectory(engine_startup_bpmengine_wodkyx_ELOImpl.java:365) at fuego.ejbengine.servlet.SchedulerServlet$DirectoryPollingTask.runImpl(SchedulerServlet.java:269) at fuego.ejbengine.servlet.SchedulerServlet$ScheduledTask.run(SchedulerServlet.java:208) at java.util.TimerThread.mainLoop(Timer.java:512) at java.util.TimerThread.run(Timer.java:462) Caused by: javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '' at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3078) at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951) at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2758) at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1812) at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1735) at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:368) at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:338) at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:321) at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248) at fuego.jndi.FaultTolerantDirContext.search(FaultTolerantDirContext.java:867) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.select(JNDIQueryExecutor.java:190) ... 23 more
-----------mapping conf file for Oracle LDAP---------
<?xml version="1.0" encoding="UTF-8"?>
<?fuego version="6.1 ALPHA" application="albpmenterprise"?>

<config>
     <object id="person">
          <object-filter>
               <![CDATA[
                    (objectclass=inetOrgPerson)
               ]]>
          </object-filter>
          <relative-dn>
               
          </relative-dn>
          <attribute id="id" value="uid"/>
          <attribute id="lastName" value="sn"/>
          <attribute id="firstName" value="givenname"/>
          <attribute id="accountLock" value="orclIsEnabled">
               <attribute-comparator operation="EQUALS" compareTo="ENABLED"/>
               <filter>
                    <![CDATA[
                         ($accountLock=ENABLED)
                    ]]>
               </filter>
          </attribute>
          <attribute id="facsimileTelephoneNumber" value="facsimileTelephoneNumber"/>
          <attribute id="displayName" value="displayName"/>
          <attribute id="mail" value="mail"/>
          <attribute id="telephoneNumber" value="telephoneNumber"/>
          <attribute id="employeeId" value="employeeNumber"/>
          <attribute id="thumbnailPhoto" value="jpegPhoto"/>
          <attribute id="manager" value="manager"/>
          <attribute id="modifyTimeStamp" value="modifytimestamp"/>
     </object>
     <object id="group">
          <object-filter>
               <![CDATA[
                    (objectclass=orclGroup)
               ]]>
          </object-filter>
          <relative-dn>
               
</relative-dn>
          <attribute id="id" value="dn"/>
          <attribute id="modifyTimeStamp" value="modifytimestamp"/>
          <attribute id="displayName" value="displayName"/>
          <attribute id="name" value="cn"/>
          <attribute id="description" value="description"/>
          <attribute id="assignedParticipants" value="uniquemember"/>
          
          <attribute id="ou" value="uniquemember"/>
     </object>
     <object id="ou">
          <object-filter>
               <![CDATA[
                    (objectclass=domain)
               ]]>
          </object-filter>
          <relative-dn>
               
</relative-dn>
          <attribute id="name" value="orclsubscriberfullname"/>
          <attribute id="description" value="description"/>
     </object>
</config>
Edited by: Lemonice on 2009-3-30 上午2:08
Edited by: Lemonice on 2009-3-30 下午7:01
Edited by: Lemonice on 2009-3-30 下午8:43

Hi,
in my case, I am trying to configure the OBPM directory using ALUI and its native LDAP service.
Now, I found that the first name and the last name in BPM are retrieved from the ALUI display name : provided we enter the display name in the format %first name% + %last name% we get them into BPM. But the display name is not always in this format...
In addition, it's the portal telephone number information which is retrieved into BPM Telephone and Fax numbers.
And, the email adress remains blank
I have installed the latest patch for OBPM (Version: 10.3.1.0.0 Build: #97172)
Would you have any documentation about creating a Profile Web Service in ALUI and specifying which LDAP attributes to map to which ALUI properties in the Profile Source ?
Thanks !
Edited by: vVince on May 6, 2009 3:46 PM

How to config the proxy of Bpel process manager(with password)

HI, i met the quetion as below
The The Oracle BPEL Process Designer & Manager server is installed on my computer in domin of my company, so if One of the BPEL processes deployed on the BPEL server needs to access a synchronous Web service hosted outside the firewall .i need to config the proxy, but the proxy of my company needs my ID and password to access outside . after I congfig the proxy
option of designer and build the Process, there will be pop-up a dialog box and ask for my ID & password .But how i config the proxy of Bpel process manager?? I read the tecnote about HTTP Proxy Configuration and config the proxy in the obsetenv.bat ,but it seems has no information about my ID&password in obsetenv.bat.
The question is How can i let the Bpel process manager know my proxy and ID&password ?? pls help me ,thx!

I have set these value in obsetenv.bat as follows, and I restart the Bpel manager server and designer.
but the same issue still occur:
set OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=pxysha" "-Dhttp.proxyPort=8080" "-Dhttp.proxyUser=oocldm\hanfi" "-Dhttp.proxyPassword=123456" "-Dhttp.nonProxyHosts=localhost".
At the same time, I have set proxy server in bpel designer of eclipse, after I build the process,it can works well(which display BUILD SUCCESSFUL), but the bpel server display error message as below :
Exception Name:
Failed to read wsdl
Exception Description:
Error happened when reading wsdl at "C:\orabpel\domains\default\tmp\.bpel_TerraFlow_1.0.jar\TerraServiceRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: Server returned HTTP response code: 407 for URL: http://terraserver.microsoft.com/TerraService.asmx?WSDL".
what happen ?

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv

How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv.

Do you mean you've replaced your remote and it wont work because your AppleTV is paired to your lost remote?
If so, http://support.apple.com/kb/HT1555 has you covered.

How to config OnDemand Report

Hi,
How to config OD Report if I want result display as below SQL command
select a.accountname,count(b.salestage),
(select count(b.salestage) from opportunity b where salestage in ('Closed/Did Nothing','Closed/Lost'))
from account a,opportunity b group by a.accountname
Thanks
Pae

if submit url with parameter
http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
error
REP-50159: Executed successfully but there were some errors when distribute the output
How to Solution?

How to Publish Multiple Websites Using Domain Masking

Let's say I have a mobileme acct called applesoranges, but then I decided not to use this name for my website. Using iweb, I have created a different website called blueberry.com, and was able to figure out how to set up my personal domain and then mask appleoranges so that only blueberry.co, appears.
I now want to add another website called strawberry.com. With one mobileme acct (applesoranges), is it possible to host 2 separate websites, each of which is masking the original mobileme acct? How does one set up 2 separate websites using iweb (each masking the original acct name)?
Many thanks!

For every MobileMe account you can only use the personal domain name option and CNAME only once. You enter your first domain name into your MMe account and then go and set up CNAME forwarding at your domain registrar to forward to web.me.com. For any other sites that you create, you need to go to web forwarding. You set-up the other domain names by using masked web forwarding and point them to web.me.com/username/sitename and by masking these will just show your domain name address and not your MobileMe/iWeb url.
Make sure that you separate out your sites, as it will be easier. You can either duplicate the domain.sites files and have one site per a domain file or use a program called iWebSites to help you manage multiple sites.
You also have the option of not using MMe and you can publish to a folder instead and upload directly to each domain hosting space. This gets away from the problem of how to forward sites to iWeb/MMe.

How to config ZFS in solaris 10

hi,
I'm testing solaris 10 x86 edition in my PC. but i don't
find any information about how to config ZFS in 10 (X86).. ;-(
if anybody know it, pls.give me some information.
thanks a lot.

ZFS has not yet been integrated into Solaris 10...
At this time you need either the "Software Express for Solaris 2/06"
( http://www.sun.com/software/solaris/solaris-express/ ) or the
"Solaris Express: Community Release"
( http://www.opensolaris.org/os/downloads/on/ ) to play with ZFS.
.

How to config the telephony button in CRM 5.0 (win client)

Dear Sir,
I can't find the documents how to config the telephony button in CRM5.0 (win clicent). Please kindly advise.
Thank you and best regards,
Vimol

i can find the solution

How to config the web.xml file, when I use Richfaces + RI 1.2?

Hi there:
I want to use Richfaces + RI 1.2 to build a project. I don`t know how to config the web.xml file.
By the way, my web server is Tomcat 6.0, my JDK's version is 6u6. I don`t want to use the facelets.
thanks.
lxm

just add this before *</web-app>*
<context-param>
     <param-name>org.richfaces.SKIN</param-name>
     <param-value>blueSky</param-value>
</context-param>
<filter>
     <display-name>RichFaces Filter</display-name>
     <filter-name>richfaces</filter-name>
     <filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
     <filter-name>richfaces</filter-name>
     <servlet-name>Faces Servlet</servlet-name>
     <dispatcher>REQUEST</dispatcher>
     <dispatcher>FORWARD</dispatcher>
     <dispatcher>INCLUDE</dispatcher>
</filter-mapping>

How to config the font size of rich pod?

Hi,
Does anyone know how to config the font size of rich pod? It's too small.
Thanks!

You can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program

How to config failover beetwen 2 domain?

Similar Messages

Maybe you are looking for