How to configur log4j logging for weblogic 10.1

Hi,
I am tried to set log4j logging for my application running in weblogic 10.1. I set a log4j.properties file and loaded the properties by a servlet. Where its load the properties files and configure it by PropertyConfigurator.
The same logic has worked out in websphere. But in weblogic, it is not working. I set the server logging and domain logging to Log4j in Admin console. Now it is writing all the log statements.
If i write a property for a package to Error level and root level is Debug. Its not working, all debug statements are getting written.
Can you please tell me the steps to configure log4j logging in weblogic 10.1.
Thanks & Regards,
Nasrin.N

Did you manage to get this working?
If yes ... what did you do?
I am having the same problem implementing commons-logging with log4j

Similar Messages

How to configure security realm for Active Directory ?

Hi,
Can any body suggest how to configure security realm in weblogic 8.1
I have simple login page where in user can enter his credentials, and i have MS-Active Directory where we maintain all users.
users who loged into web application has to be authenticated from Active Directory.
please suggest what are the steps that we need to follow
thanks in advance

Hi Sankar,
You can login to the weblogic server admin console and create a new realm.
Once you have created the realm you can add the authentication provider.You add the Active Authentication Provider.But you must have the the configuration inforamation of MS AD.You can read my blog http://dev2dev.bea.com/blog/bishnu_kumar/
where the integration is with iPlanet LDAP.Steps will be similar.
You must have a login portlet in your portal application and that should have been in accordance with j2ee security standards.For example you may use basic authentication or userlogin control or p13n API
Regards
Bishnu

How to configure User domain in Weblogic..........

How to configure User domain in Weblogic Application Server 8.1 from Command prompt on windows Xp?
Thanks in Advance.


You can use WLST or weblogic.Admin command. WLST is the recommended appraoch. Here are a few links for both of the above:


http://edocs.bea.com/wls/docs81/admin_ref/cli.html
http://e-docs.bea.com/wls/docs91/config_scripting/using_WLST.html
http://edocs.bea.com/wls/docs90/config_scripting/domains.html
http://dev2dev.bea.com/blog/hoos/archive/2005/09/what_no_wlst_1.html
http://dev2dev.bea.com/pub/a/2005/01/wlst_offline.html
http://dev2dev.bea.com/blog/hoos/archive/2005/10/environment_pro_1.html


Hussein Badakhchani
London Middleware

Edited by hoos at 01/07/2007 3:50 AM
Edited by hoos at 01/07/2007 3:51 AM

How to configure log4J ?

Hi All,
Can anyone please let me know how to configure log4J in portal?
I searched in sdn, help.sap and market place, but in vain. Could n't really get any help.
Thanks in advance
-Sudheer

Hi Kathik,
That's pretty much not very different from configuring log4j in another IDE. Look at the documentation website of the Log4J project, see: http://logging.apache.org/log4j/docs/documentation.html.
You can find a good intro at: http://supportweb.cs.bham.ac.uk/documentation/tutorials/docsystem/build/tutorials/log4j/log4j.html.
You could also use the logging mechanism of the Java SE.
Ronald

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
 if c1 is not there c2 has to be approved
 Change in the value of the rate contract contract
 Change in the validity of the rate contract
 Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to get change log for z-fields in VBAk(Sales order)

Hi All,
Please help me in this.
My requirement is get the change log for z-fields in sales order.
In the sales order header level we have one tab Additioanl data.
In this we have z-fields, if we change any of the field value, it is accepting the same and updating in data base as well.
But it is not appearing in change log<. I.e. Environment->changes.
How to get the change log for the z-fields.
In data element level enable the check box of change document.
Please help me in this.
Thanks in advance
Jaya,G

Hi Jaya,
For this you need to do some coding. Here is a link which tells you, step by step procedure how to activate Change log for the Z tables.
THe Object that you need to use for Sales Document is VERKBELEG
[https://wiki.sdn.sap.com/wiki/display/ABAP/Maintaining%20Change%20Log%20for%20Database%20Tables]
Hope this helps..
This is Primarily a Technical Consultant Job. Take his help before you make any changes.
Thnks
Srini

How to use log4j logging

Hi all,
i'm very new to the world of software devlopment.I'm currently working on devloping banking application in JAVA.
I wanted to log all the exceptions thrown by the code.
Could any one of you tell me as to how to use log4j logging in my project. Also where to find the jar file. I searched the entire web but i didn't find it anywhere.
Thanks

You should find what you need on the Log4j Project Page.

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
 username = apps
 document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
 username = merge
 document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
 Application Framework Agent
 Applications JSP Agent
 Applications Web Agent
 Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
* <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
* <jta-data-source>myJtaDataSource</jta-data-source>*
* </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below : <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
 <provider>org.hibernate.ejb.HibernatePersistence</provider>
 <properties>
 <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
 <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
 <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
 <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
 </properties>
 </persistence-unit>
</persistence>Can you please tell me why is it so ??

Adobe Document Services - http Response 500 - How to configure the logging?

We are building an application in Web Dynpro Java that fetches data from an R/3 system via an RFC connection and is then supposed to show said data in a pdf within an iview. For that task we want to use the InteractiveForm UIElement. We bind the data to its pdfSource in the iViewu2019s context. Currently the form only consists of a text field bound to one attribute element of the pdfSource context node.
The ADS webservice is configured according to the manuals found here:
http://help.sap.com/saphelp_nw70/helpdata/en/fa/0b700d6cfd4e03a8ec2186ba6ff4af/frameset.htm
and tested successfully under the following link
http://<portal_host>:<port>/AdobeDocumentServices/Config?style=document
However, when we execute the application, an error occurs in the webservice generating the pdf, namely Invalid Content-Type:text/html. The error occurs when the iView containing the form is shown for the first time, even before the attributes of the pdfSource context are filled with data (we expect to see an empty form).
As it seems the webservice is expected to return a MIME type of either application/pdf or text/xml (we donu2019t know for sure since the SAP manuals and forums are inconclusive here), but instead we get text/html. This seems to be due to the fact that the webservice exits with an http response 500 Internal Server Error (we used several network monitoring tools to confirm that such a response is sent). Since such http responses are but html files with an empty body, yet not xml or pdf, the aforementioned error does make sense to us, but we do not know what Internal Error has caused it.
The only help that SAP seems to provide for an error u201CInvalid Content-Type:text/htmlu201D in context with ADS points to an expiring password or otherwise poor configuration of the ADSUser, which (most certainly) is not our case here since, and as said above, the configuration was and can be tested successfully.
We then tried to view the logs for this error on the machine where the J2EE engine is running with ADS installed according to this (not very comprehensible) guide:
http://help.sap.com/saphelp_nw70/helpdata/de/97/ccfc3f0ac2c642e10000000a1550b0/frameset.htm
We cannot find anything relevant in the server.log of the Visual Administrator except this message (it is generated exactly when our error occurs u2013 the trace severity is set to ALL for all Adobe application elements according to manual):
Date , Time , Message , Severity , Category , Location , Application , User
12/08/2010 , 13:50:46:511 , application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to GENERATEPDF
Exception id: [0800274DA7ED00850000005B00000900000496E5919E28BA] , Error , /System/Server/WebRequests , com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl , sap.com/tcwddispwda , Guest
There is no error.pdf to be found on the file system and since neither have we known nor are we told by the error message, whether the underlying cause is is a render error or connection error or configuration error or what not, we donu2019t know whether the error.pdf is supposed to be generated at all.
Or could there be any other reason why generation didnu2019t take place?
Furthermore we canu2019t seem to be able to find any logs more verbose or detailed about this issue - at least not within the Visual Administrator or the portalu2019s nwa.
How is it possible to properly debug the webservice for pdf-generation or at least to retrieve a fully detailed log containing all notifications and exception stack traces etc.?
I am assuming that we are making some basic mistakes regarding the logging configuration - but what?
Our goal is to know what causes the 500 Internal Server Error response that causes the Incorrect Content-Type exception.
We are using a NetWeaver 7.01 portal installation with Adobe Document Services 7.01 installed on a Windows Server 2003 platform.
Any help is highly appreciated!
Serg

Have you tried restarting the Java PDF object in Visual Administrator? Once you do all of your config, you have to restart the PDF object (sao.com/tcwdpdfobject) for the changes to take place. I am assuming you've run all of the test programs in SAP (FP_TEST_00, FP_TEST_03, etc.). Is there any chance that the ADSUSER is locked somehow?

How to configur log4j logging for weblogic 10.1

Similar Messages

Maybe you are looking for