How to configure a new service in SICF & create a BSP Application within it

I created a service called zappl under the default_host. The goal is that new customer BSP applications be create within it. So, these applications don't get together with SAP applications (sap/bc/bsp).
However when I try creating an application, the system tries creating automatically a node in the SAP node (sap/bc/bsp). As I don't have permission in this node, the application isn't created.
In SE80, I put /zappl/ prefix before the name application, but the system didn't accept.
Does anyone work using that method?
Regards,
André

Sergi,
I've had asked them to give me permission, however the admin team wants to separate the customer applications from SAP applications, creating them in another node under the default_host root.
I have permission to create new nodes within node /zappl/. I created a node zbsp_test and defined CL_HTTP_EXT_BSP as handler. Then, I created an application called zbsp_test too, however I don't get link the application to the recent node. SE80 tries creating it in /sap/bc/bsp. I even tried put /zappl/ before the application name, but it is considered an invalid name.
Thanks for your suggestion.
Regards.

Similar Messages

  • How to configure solution manager service desk knowledge base for customer?

    Hi Expert,
    How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
    Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
    Please advice,
    Thanks
    regards,
    ng chong chuan

    >
    Chong Chuan Ng wrote:
    > How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
    >
    > Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
    Hi,
    It's a good idea, but currently it's not yet supported.
    In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
    With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
    Best regards,
    Ruediger

  • Osb 11 : How to configure tuxedo business services in a clustered domain.

    Hi,
    We have a platform with a clustered domain Osb ( 1 admin server and 2 managed servers dispatch on several physical servers) and two Tuxedo instances offering the same service exported in 2 different gateways on each Tuxedo instance.
    How to configure a business service with tuxedo transport working on this platform with failover and load balancing ?

    Thanks for the answer but it doesn't work.
    The fact is that we work on OSB 11, not directly in WebLogic.
    And Osb always modify the WTC configuration even if we modify it before in weblogic.
    To define a business service with multiple remote access points and apply a load balancing algorythm, Osb need an URI for each remote access point (not for each imported service).

  • How to configure a new product type with a new operation deal?

    hello, All,
    I wonder to know if somebody knows, how to configure a new product type with a new operation deal with the amortization divided?, I mean in the SPRO, portfolio of securities with the characteristics mentioned.
    Hope you help me.
    Bests regards.

    Hi Prasad,
    Thanks for the information, but the directions that you give me not be useful, I want that the UPDATE TYPE  appears in the position cash flow in the transaction deal in the option-->operative valuation area( 2nd option) or in the report TPM13, this for two treasury ledger dates.
    I mean that the update type "samxx" affect the accountant as amortization divided?, this transaction deal is a purchase.
    Thanks in advanced

  • How to configure wokflow for MRP generated  & manually created PR

    Dear Gurus,
    I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
    I have some questions regarding workflow
    1)     How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
    2)     Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
    Looking forward to your reply,
      Thanks in advance,
    Best regards
    Tushar
    SAP MM Consultant

    Dear Mike,
    Thanks for your reply, & sorry for not responding on time.
      Here are my constraints:
    1) Not a single component of HR module will be implemented.(Project management decision:-()
    2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
    3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
    The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
    "An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
    Program=SAPLSWF3
    Include=LSWF3U05
    Row=22
    Module name=SWF_WFP_REPOSITORY_CONTENT_GET
    The same dump is coming while accessing SWF_WFPVW table from SE16.
    Request to Mike & all of you, help me in this regard.
      Thanks in Advance,
    Regards,
    Tushar

  • How to show the new table record after creating

    I have a table form. After creating a new record to the table, the page go back to the same page. I wanta know how to show the new record after click 'Create' button. Right now, all the items will be cleared.
    Thanks.

    The button submits the page so just create a branch that directs to a new page (which you'll have to create if you have not already done so) after submission which directs to a new page and uses the newly generate PK to display the row you've generated. You'll need to make the branch conditional on that press of the Create button.
    Phil

  • How to create custom BSP application in SAP CRM?

    Hi Experts,
    I would like to seek help from you. I am new in developing CRM objects. My first requirement is to create a custom program that will generate a PDF report.
    First thing I would like to know is the transaction code where I need to create a BSP application that will be able to run in crm webclient. Please clarify if it is in BSP_WD_CMPWB or in SE80 because it is said that I should create BSP application using MVC.
    Second thing is how will I be able to call a smartforms in a BSP application. The scenario for my custom program would be, I should have a two input fields in the selection-screen which are Business Partner ID and Product Lines. together with a button that will trigger the form when ticked.
    Hope to hear from all of you. Your help will be very much appreciated.
    Thanks and Regards,
    Monica

    Hello MonicAnna,
    You can find some information on this page.
    (http://help.sap.com/saphelp_nw70/helpdata/en/59/cd7daa07d711d5b66f006094192fe3/content.htm)
    And also you dont have to use se80 to create new Bsp appliaction. You can create new application by this transaction BSP_WD_CMPWB.
    Zafer,
    Edited by: Zafer Kuru on Dec 5, 2011 10:12 AM

  • How to configure 9i Forms Services Demo Manually

    Hi,
    I want to customize the forms services demo and run from my own configuration file i mean instead of forms90demo.cfg file i want to create my own cfg file and run the forms how to do this?
    for example currently to run a demo i need to give the url as
    http://machine:8888/forms90demo/f90servlet?config=xxx
    i want it as
    http://machine:8888/<myconfigname>/f90servlet?config=xxx
    how to manually configure the demo? to run in a customized way
    Plus will this demo run on Unix? and how to configure in Unix?
    All the above questions for 9i DS, coming to 9iAS how to configure/install on Windows and Unix?
    Regards
    Mahesh

    Do the following to select an own config file for the f90demo:
    - Open file web.xml
    (in: oracle_home\forms90\demos\j2ee\forms90demo\
    forms90demo\WEB-INF)
    - specify your configuration file name between tags
    <param-value> and </param-value>
    (under <param-name> configFileName</param-name>)
    Do not forget to <!-- and --> tags around this
    <init-param> section.
    - Do not use "" around the filename.
    You can also copy the whole <servlet> ... </servlet> section of f90servlet, and give a new servlet name (e.g. f90demo instead of f90servlet). From then on you can use f90demo as a servlet. You must, before you can use this new servlet alias, also make a copy of the servlet-mapping section for this alias.
    Servlet aliasses are a perfect way to make configurations in two dimensions, one using config sections in the config file (e.g. for different applications), the other using servlet aliasses in web.xml (e.g. different environments, such as dev and prod).
    Peter

  • How to configure request manager service for multiple website in one web application

    I have set up sp 2013 as below:
     web application : wa1
    site collection : sc1
    sp site: site1, site2
    I used 2 WFE, 1 APP, how can I use request manager service to control  site1 to wfe1, site2 to wfe2?
    Awen

    That's not what i'd describe as load balancing.
    A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
    fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
    This article shows how to configure the RMS and may help show how your request is difficult to configure:
    http://www.harbar.net/articles/sp2013rm2.aspx

  • How to configure a new third party sales document type?

    Hi SAP SD gurus,
    I am new to the SAP world, I need your help in configuring a new third party sales document type for a site.
    There are existing third party document types being used in the region, but the client wants an entirely new third party document type that is activated for CREDIT MANAGEMENT.
    I just need your inputs, as how to go about it. If I copy from an existing third party sales doc. What additional steps do I need to follow? Like Item category config, copy control settings, and credit management.
    Is there a need to create new billing types?
    Also as per process, by creating a new document type, how will it affect the logistic processes, if any?
    Thanks a lot in advance for your valuable inputs.

    Hello,
    You can create new document type under following customization path
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Define Sales Document Types
    Now create new document type by copying the standard document type OR
    Now go to
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Define Item Categories
    which is already defined for third party sales (TAS)
    Now assign this iteme category to your new document type
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Assign Item Categories
    Assignment needs to be done in combination of sales document type and item category group (BANS)
    Now
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Schedule Lines
    Assignment of schedule line is already done as you are using the standard one.
    Lastly, you may need to maintain copy control for your newly created sales document type for this go to
    SPRO>>Sales and Distribution>>Sales>>Maintain Copy Control for Sales Documents
    (Copying Control: Sales Document to Sales Document)
    Here you can define copy control requirements.
    BR,
    Tushar

  • How to enable a new service

    I'd really like to create a new search listing page for the wiki, without simply replacing the existing one.
    So, I'd like to duplicate the existing search.xsl , rename it search2.xsl and then having modified this one, call either as the fancy takes me. e.g. /groups/foobar/search2/?.....
    Can anyone advise as to how new services, I think that's what the wiki calls them, can be 'registered'
    ta.

    You are correct that we create a virtual XML document structure in memory and >pass it through the XSLT template, which is also turned into a virtual document >structure in memory at startup. We put everything inside a context node, so you >could theoretically pass this through as-is using a template and see what's >available to you.
    Forgive me, atom nodes are at the edge of my knowledgebase, but I'm prepared to go away and expand my frontiers. Could you offer any hints as to how I would "pass this through as-is using a template and see what's available"? I feel that this could be very useful to a lot of people.
    If I stripped out the bulk of the contents of a default.xsl template, what would I replace it with to create an HTML listing of the elements/attributes that were available?
    Another avenue by which you can add functionality without changing the Python >files is via JavaScript. Remember that any JavaScript files you include in your >custom theme will get included in all of your pages. You can use these files to >manipulate the DOM and even look up additional information from the server.
    Yes I can see this though my instinct at the moment is to try and leave the functionality on the server. I can see situations where one wouldn't but..
    I'm working on a couple of code samples currently (and will put them online >eventually) but if you have something specific in mind that you're trying to >accomplish, I may be able to help you.
    We'd love to see some code samples, sooner rather than later, but eventually would be good enough.
    I've got a number of ideas and a general feeling that tailoring search, for example, will prove very useful
    Specific example.
    I want to create a listing of pages that relate to a number of books I've written. A page for each book has been created in the wiki and each has a animage of the front cover of the book. I'd also like to create a 'summary' paragraph for each book. Each book is tagged as a 'book'
    So, I want to search for 'book' and create a listing, similar to a current search, but with the image for each book in place of the generic 'star' image followed by the book title (page title) and the summary paragraph.
    Search at the moment uses the snippet - but is there any way to control its length or 'end char' that it 'snips' at ?
    Could I create a named 'div' in a page that search, or the search.xsl, could recognise? Or is there a more elegant method.
    I can get the image by ensuring that each book image is simply called booktitle.jpg which is equivalent to pageTitle.jpg but this is not particularly flexible or in keeping with the spirit of the wiki. Unfortunately the page.plist DOESN'T contain any image/imageName key pairs.
    Is there any legitimate way that we can write into the page.plist and then be able to access entries ?

  • Accidently deleted xorg.conf, no clue on how to configure a new one

    After moving through Gnome, Cinnamon, XFCE and KDE I decided to try something new. Using compiz, tint2 and cairo-dock instead of a DE.
    It worked, to a sense. Resolution was not correct and my two monitors were clones of each other and not individual screens which I obviously prefer. I can't remember configuring the xorg.conf earlier, so I assumed that it auto-generated and found the information itself, so I deleted it and hoped it'd generate by itself with the correct settings. Stupid move by me, as nothing works now. When my computer starts, I'm thrown into tty1 obviously. I can log in and execute commands from there, but the moment I execute the command startx, nothing works. The X server starts up fine and I can see things on the screen (same resolution as before) but I can't type anything, nor move my mouse. This ends up in me having to restart since I can't key combo into another tty to kill the X server either. I've checked the wiki regarding the xorg.conf and how to configure it, but I'm really at loss. My head is grinding just reading it, I don't really understand how to proceed.

    Configuring and maintaining the X server is most likely my weakest link when it comes to linux, haha
    cfr wrote:
    raghap wrote:To be honest, I've no clue how all those video drivers got there, haha. I'm sure I only installed mesa, vesa and the open source ATI drivers! Anyway, reinstalling xorg-server fixed the issue with my keyboard and mouse. Not sure if this is the right place to ask considering the original issue have been solved, but how do I get my dual monitor setup to work correctly? I know that the wiki page says how, but it sort of confuses me. Am I supposed to write that down twice?
    Are you supposed to write what down twice?
    Please don't expect somebody to step you through this. The wiki tells you what you need. Of course, if something is confusing, please ask. Tell us what is confusing and why, but you need to start by trying to understand it and letting us know where you get lost. Apart from anything else, this may enable somebody to edit the wiki to make it less confusing for future readers. (That person might even be you.)
    In any case, I have no idea what 'that' refers to.
    Sorry for being unclear, I was referring to this part of the wiki page.
    https://wiki.archlinux.org/index.php/At … _X_screens
    Edit
    Thanks a bunch for the help guys! Finally got the resolution straight and my monitors to behave correctly, thanks to what you wrote Skottish. Really need to get a better understanding of how Xorg works, haha.
    Last edited by raghap (2013-10-26 20:16:23)

  • How to configure lion mail service with lion server settings

    I've sucessfully setup outgoing mail but I keep getting "The server returned the error: The server "incoming.domain" cannot be contaced on port 110".  What configurations for Lion Server and Mail incoming mail server do I need to receive mail?

    Please also see:
    How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
    Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
    After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
    Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
    Thanks,
    Hussein

  • How to configure workflow mail service..

    Hi Experts,
    How to configure the workflow mail server.
    I will tell you my requirement,
    i have to configure email notification for oracle application R12.1.2 , all the emails related to administration  should go to one email id, this email id is of gmail. I am not able configure it.
    Oracle application : 12.1.2
    Oracle Database : 11.1.0.7
    Please help me.
    Regards,
    Mohd Mohtasham Jeelani

    Please also see:
    How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
    Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
    After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
    Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
    Thanks,
    Hussein

  • How to log in to Service Desk to create sample message to SAP?

    Dear all,
    How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
    Regards
    GN

    Hi GN,
    You have different options to create messages in test component SV-SMG-SUP-TST:
    1. if you are on 7.1 you can create message using CRM_UI
    2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
    Thanks
    Regards,
    Vikram

Maybe you are looking for