How to configure a Windows machine with any vnc server software for ARD
I need someone to direct me in the right direction to configure and install any vnc server software so that I can control a windows machine with ARD like I control the rest of my macs in the lab. I need some suggestions as to the best and easiest software to configure and the correct settings to get the machine to be able to show in ARD. Thanks
Sort of. I found this article below that helped me to connect to the remote CF server using MXML. It seems that you have to create a regular project in Flex with Aplication Server Type set to None and connect to CF using the endpoint attribute of the RemoteObject MXML tag or via AS.
http://www.aliaspooryorik.com/blog/index.cfm/e/posts.details/post/200
However I found out after getting error using the AS3 code to use the endpoint property that
mx.rpc.remoting.RemoteObject does not support the "endpoint" property
whereas mx.rpc.remoting.mxml.RemoteObject does. See link below
http://www.mail-archive.com/[email protected]/msg101439.html//www.mail-archive.com/[email protected]/msg101439.html
So I had to change my AS3 code by adding a new channel to my RemoteObject using a code similar to the one on the link below (Note that this code uses PHP, when I instantiate myRemoteObject, I do so informing that the destination is "ColdFusion" [new RemoteObject("ColdFusion")], so no need to set destination as in the code on the link below
http://tech.groups.yahoo.com/group/flexcoders/message/120115
I hope that helps you.
Similar Messages
-
How to configure the .ini file with applet
hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browserHi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu -
How do I manually transfer music with the new itunes update for Windows? I don't want to sync my library and lose all of my music for what I have in my current library.
The same way it was done in every previous version.
Connect the device to the computer.
Right click on the device in iTunes and select Transfer Purchases.
Why would you lose any content by syncing with iTunes?
Is this not the computer that the device is normally synced with? -
How do I install Windows XP with boot camp assistant, on my IMac?
How do I install Windows XP with boot camp assistant, on my IMac?
Lion cannot BootCamp XP.
You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
And Windows 7 Pro has XP mode. XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS. -
How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?
How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?
You can't. Only Windows 7 is supported in that configuration.
-
ARD3 on Intel cannot control windows machines with VNC
I have a district full of windows machines with a version of VNC installed and the server service running. I have a Powerbook G4 running 10.4.7 and ARD3 and I can control/observe all our workstations just fine. I'm having trouble controlling any of our windows workstations from any Intel-based mac. I've tried it on a macbook pro, Intel iMac, and our Intel Mac Mini, and all have the same issue. When you attempt to connect the first time, it asks for the username and password, then says "Connection failed to <ipaddress>." and does this every time after that. I've tried reinstalling ARD many times, even tried wiping the iMac and starting from scratch, and still no luck.
I still have no problems with ARD3 on either of our 2 Powerbook G4's but this happens on every Intel-based mac I have tried. I hate having to have another (older) machine running on my desk for a single task. Has anyone else seen this issue or knows what the problem is?
Again, all our macs (intel and ppc) are running 10.4.7 with ARD 3. Thanks in advance!!
Intel iMac 20" Mac OS X (10.4.7)same error on my IntelMacs - not Apple like!
-
Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
How to configure the wifi access with specific time slot for kids?
how to configure the wifi access with specific time slot for kids?
Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility. -
How to configure Exchange 2013 OWA with Single Sign On
Hi All ,
How to configure Exchange 2013 OWA with Single Sign On ?
Thanks .Hi,
From your description, I am not quite sure what you really want to achieve. Could you explain it furthermore? If you need to set up Exchange 2013 OWA single sign on with Exchange 2010, here is a helpful thread for your reference.
Exchange 2013 OWA Single Sign on with Exchange 2010
https://social.technet.microsoft.com/Forums/en-US/2899ebfc-8622-4cdc-8d77-d76b607618f7/exchange-2013-owa-single-sign-on-with-exchange-2010?forum=exchangesvrdeploy
If that is not your case, please feel free to tell me.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
Is it possible to run a Windows domain with a Mac Server?
Looking for some advice on getting rid of our Windows domain controller (DHCP server, AD, etc.) in favour of a Mac Server (which we own). Is it possible to run a Windows domain with a Mac Server?
Snow Leopard Server (10.6) and earlier included Samba which supported acting as an NT Domain Controller (this pre-dates Active Directory). Lion (10.7) and later as standard can no longer act as an NT Domain Controller nor can they act as an Active Directory server.
So the short answer is no.
Theoretically you could port Samba4 to a Mac and Samba4 can act as an Active Directory server. In reality this is not going to be easy but is theoretically possible.
An easier option might be to run a copy of Linux (e.g. Ubuntu) in a virtual machine e.g. using VirtualBox and then run Samba4 in that and configure it to act as and Active Directory server. Then you could connect the Mac side to the Samba4 Active Directory server. This approach would use all Mac hardware, and not have any extra costs of licenses to buy and as far as all the rest of the network is concerned would be a standard Active Directory server environment. -
How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)
Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
LaurentI strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf -
I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.
Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H. -
I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?
Lets start over...
Please restart the network.. shut down everything..
Restart in order.. modem.. router.. if different to TC.. or TC.. client devices.. wait 2min between each startup.
If the TC does not show up on the computer, in finder.. then we need more info.. what OS are you running?
Does the TC show up in Airport utility? Are you running wireless or ethernet?
If you still have issues.. plug the TC directly into the computer by ethernet.
Do a full factory reset of the TC.. and see if it now shows up.
Please tell us exactly what model TC it is and how old.. the A1xxx model number from the base will help if you don't know.
You take a screen shot of the TC opened in finder.
eg..
My TC is named Tardis4.. click on it.. and then open the data folder.. on this one called Tardisdata.
Then take a screen shot of it so we can see what the problem is.. screenshot.. with area selection.. control + shift + 4 .. the picture goes into the desktop.. and then you click the picture icon in the posting web page controls and select the picture. -
How to configure the ESS portal in ehp 6 server?
Dear All,
Pls advice me how to configure the ESS portal in my client server?
I want to create new iviews ,pages,workset and link them all to R/3,with total configuration steps please.
Thanks and Regards,
Pradiphi pradeep ,
which version r u using wdjava or abap ? ......if ur using java you have to do all in home page framework and if you are using with launchpad from EHP5 better you can create it from launchpad by going to t -code LPD_CUST and select the ROLE:ESS and INSTANCE: MENU
REFER Below............
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09b3304-07d8-2b10-dbbf-81335825454f?QuickLink=index&overridelayout=true&38388417774934
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?QuickLink=index&overridelayout=true&5003637159921
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=31476&bc=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=true
Maybe you are looking for
-
i Got a new phone and and it says I have to answer a security question I forgot my security question answers so I clicked the button where I can reset my security questions and send it to my email but it never sent it to my email what should I do bec
-
Hi Friends, i have seen routine option at extraction tab of info provider. Pls can any one explain me in which secenario we can write this one. Thanks in advance, Thanks& Regards, Ramnaresh. Edited by: ramnaresh porana on Dec 16, 2008 3:28 AM
-
Application Error when starting PE3
Hello, whenever i try to start Adobe premiere elements 3.0 the fancy box pops up and starts to load everything and then another box pops up that says "The instruction at "0x09fd10e3" referenced memory at "0x00000018". The memory could not be "read".
-
MacBook Pro won't start after changing access rights
I did something very wrong. Unfortunately I changed the access rights of Macintosh HD for "everyone" to none. Result, my MacBook Pro won't start anymore. Already tried the installation disk, reset password for root and users. No result. Help program
-
P6 Web - EPPM 8.1 with java 1.6.0_29?
Hi there, I'm having a problem with The P6 Web 8.1 that went "User Session Timeout Expired" everytime I logged on. I tracked down the problem and find that the java running is 1.6.0_29 which isn't included in the tested config for EPPM R8.1 The "Chan