How to configure Auto Discovery in OEM 12c

Hi
I am new to OEM12c. I need to set up the auto email alerts through OEM 12c. through the Admin guide I have read the procedure.But I am not able to implement it. Can anybody tell me here the detailed procedure to add the managed target in OEM12c. We need to monitor mainly HCM domain form here. Please tell me the prerequisites also. When i try to configure auto discovery of host it asks me for host credentials but i ma not able to get for which credentials it is asking for.
Thanks in Advance

Hi,
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? - Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ? - Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ? - Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? - Doc ID 1386816.1
++ Regarding the Auto Discovery in 12c following the document below:
Configure Auto Discovery In 12c - ID 1529868.1
Regards,
Venkat

Similar Messages

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

How to configure email Alerts in OEM Cloud 12c for Database Servers up/down

Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel Vega

Hi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat

Re: How to add targets manually, in OEM 12C, through command line...

I am trying to add the rac targets using emcli interface. Before adding rac_database as target type we need to add a cluster. I Used the following command to add a cluster but it fails with internal error. and the log files do not show any error.
Any idea how to fix this?
./emcli add_target -name="bacalbdb01n_cluster" -type="cluster" -host="bacalbdb01n1" -monitor_mode="1" -properties="OracleHome:/u01/crs/oracle/product/11/app;scanName:bacalbdb01n-scan;scanPort:1521" -instances="bacalbdb01n1:host;bacalbdb01n2:host"
Internal Error: The EM CLI system has encountered an internal error. Details have been added to the EM CLI log files.

Looks like it might be bug 15982024 where the target is already part of a cluster. Can you check your unpromoted targets (Setup -> Add Target -> Auto Discovery Results -> tab Agent Based Targets) and see if a cluster on either of those hosts is already discovered but not yet promoted. If so, you can try to delete that discovered cluster, and retry the cmd.
Log File Locations
The following examples show possible log file locations:
Example 2-3 No Configuration Directory Specified with Setup Verb (default location)
user.home/.emcli/.emcli.log user.home/.emcli/.emcli.log.1
If you do not specify a configuration directory when you run the setup verb (-dir option is omitted), EM CLI assumes the .emcli configuration directory is located within your local home directory. The log files are placed at the root level of the .emcli directory. The .emcli directory must be local (not mounted remotely).

How to configure Request Monitoring in OEM 12.1.0.1.0

Hi All,
I have deployed ADP manager and ADp agent in OEM 12c Cloud Control. There is a Middleware feature in OEM 12.1.0.1.0 named "Request Monitorung" for which there is pre-requisite of deploying ADP manager and ADP agent. I read an oracle document for Request Monitoring but fail to understand its capability and significance also I am not able to configure it. Can anyone provide me with some good links explaining this particular feature in OEM. In the document which I read it is mentioned that
"To view and configure requests, grant the Request Monitoring Administrator privilege which provides full access to the Request Monitoring pages and allows the user to modify the request configuration settings. For richer Request Monitoring functionality, we recommend that you grant the following privileges:
◦View any Target privilege which allows user to drill down to the Target Home page and to view the target metrics in the Topology view.
◦JVM Diagnostics privilege which allows user to drill down to the JVM Diagnostics pages from the Topology page. "
How can I grant these priviledge is not mentioned here. Also the document which I am referring if for OEM 11.1.0.1. I didn't find any document for OEM 12.1.0.1.0
Please help!!
Thanks in Advance!!

Hi Roshni,
BTM supersedes Request Monitoring in functionality as it is payload aware and much more granular as a whole in regards to its requestion transaction monitoring capabilities. This is particularly true as we just released the Business Application dashboard as mentioned in the previous thread. It is highly recommended that BTM be used in 12c as opposed to the older Request Monitoring functionality.
Cheers,
Glen

How to tell if you have OEM 12c BP1 installed?

I had OEM 12c installed and attempted to download/apply the Solaris OEM agent software. I ran into the "Below host metric patches are not applied to OMS." error. I discovered this was because I needed BP1.
After 3 days of trying to uninstall OEM, finally got it uninstalled, downloaded OEM 12c w/BP1 and installed it.
Once again, I tried to download/apply the Solaris OEM agent software...and I got the same error message. Very frustrating.
I don't see anything in the "About" pop-up or "emctl status oms" output that actually says a BP has been installed though. Could I have just reinstalled the non-BP version? I got the installations zips directory from the Oracle website that says "Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) for Linux x86-64
(With Bundle Patch 1)" so I don't think that's the issue. Is there something else I need to do to get BP 1 working??

Few things:
a) If you have linux oms with bp1 and want to deploy solaris agents ( with bp1) then you need to follow the steps from this doc:
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/aix_solaris.htm#CIHJJGDG
You will be required to apply patches on OMS and plugin homes on OMS.
b) If you want to find wether the OMS installed has bp1 or not follow the note: How to Determine if EM Cloud Control 12c with bp1 has Been Installed (Doc ID 1424439.1)

How to configure auto copy pr attachment files to po ?

Dear expert,
when user copy PR to PO,they want to copy PR attachemnt files to PO,I don't know how to configure this function ,could you please tell me?
Looking forword to your reply.
Best Regards,
Merry

Cancel this question

Configuration error when installing OEM 12c

Hi
I was trying to install OEM cloud control 12c release 2 on a 64 bit Red Hat Enterprise Linux Server release 5.7 and in the “OMS Configuration” step the process encountered the following error and stopped.
INFO: oracle.sysman.top.oms:Securing OMS ......
INFO: oracle.sysman.top.oms:java.lang.Exception: emkey is not present in repository and backup is not present on file system. Hence emkey cannot be copied to credstore.
INFO: oracle.sysman.top.oms:           at oracle.sysman.omsca.adapter.wls.OMSWLSAdapter.adapterPostDeployAndReposSetup(OMSWLSAdapter.java:2844)
INFO: oracle.sysman.top.oms:           at oracle.sysman.omsca.framework.OMSGenericAdapter.postDeployAndReposSetup(OMSGenericAdapter.java:327)
INFO: oracle.sysman.top.oms:           at oracle.sysman.omsca.framework.OMSCAFreshInstall.execute(OMSCAFreshInstall.java:193)
INFO: oracle.sysman.top.oms:           at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfigAssistantDriver.java:240)
INFO: oracle.sysman.top.oms:OMSCA-ERR:Securing of OMS failed
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:OMSCA-ERR:Post "Deploy and Repos Setup" operations failed. Check the trace file:/u02/Middleware/oms/cfgtoollogs/omsca/omsca_20130701175825.log
INFO: oracle.sysman.top.oms:
Check the OMS Configuration Assistant logs at: /u02/Middleware/oms/cfgtoollogs/omsca
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
And the following is from the mentioned log file:
SEVERE: Exception occurred while securing OMS:
java.lang.Exception: emkey is not present in repository and backup is not present on file system. Hence emkey cannot be copied to credstore.
                at oracle.sysman.omsca.adapter.wls.OMSWLSAdapter.adapterPostDeployAndReposSetup(OMSWLSAdapter.java:2844)
                at oracle.sysman.omsca.framework.OMSGenericAdapter.postDeployAndReposSetup(OMSGenericAdapter.java:327)
                at oracle.sysman.omsca.framework.OMSCAFreshInstall.execute(OMSCAFreshInstall.java:193)
                at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfigAssistantDriver.java:240)
Jul 1, 2013 6:15:22 PM oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
SEVERE: OMSCA-ERR:Post "Deploy and Repos Setup" operations failed. Check the trace file:/u02/Middleware/oms/cfgtoollogs/omsca/omsca_20130701175825.log
Jul 1, 2013 6:15:22 PM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
SEVERE: Post "Deploy and Repos Setup" operations failed.
Jul 1, 2013 6:15:22 PM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
I have to mention that previously I installed OEM cloud control 12c release 2 on a 64 bit Windows and used the DB that I am trying to use for the current installation as the repository. Actually for some reason I stopped the previous Windows OEM and try to install a new Linux version and I want to use the same DB. Is this the reason for the error? What should I do to solve that? What about to create a new DB schema?
Ferez

AkankshaSheoranKaler,
Yes, I am using same database to house the 12.1.0.2 OMS on win and 12.1.0.2 on linux but I am not going to use the OMS on win.
Your solution worked for me. Dropping sysman schema and removing it's related synonyms solved the problem, thank you very much.
Ferez

HOW TO CONFIGURE AUTO START

I would like to know that in case of POWER SHUT DOWN of my Sun Server what kind of configuration to be done in NVRAM or SYSTEM BASED CONFIGURATION , so that as soon as power comes my server will restart automatically .
i.e. No manual restarting of SERVER & login to be required.

Hmm, thats going back a bit.
As far as I am aware, they should power up automatically.
Its just a matter of making them boot automatically instead of sitting at the ok prompt.
For that you need to set the "auto-boot?" eeprom variable to true.
Use "setenv auto-boot?=true" at the ok prompt or the eeprom command if the machine is already booted.

How to inegrate OID with OEM 12c Cloud Control

Hi All,
Can anyone please tell me how can I integrate OID with OEM 12c Cloud Control. As we can integrate our weblogic administration console with OID,is it possible to integrate OEM cloud control with OID?
Thanks in Advance!!

Hi,
Please find the URL below:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/security.htm#BABGAGIJ
Following section will provide you the information for OID intergration:
13.2.5 Oracle Internet Directory (OID)
You can implement an OID-based authentication scheme to have Enterprise Manager authenticate users against the OID.
Running the emctl config auth oid command on the OMS creates a WebLogic authentication provider of type OracleInternetDirectoryAuthenticator that uses the configuration parameter values specified by the command. Any configuration values not specified retain the default values. Tuning and modification of advanced OID configuration parameters is carried out through the WebLogic Server Administration Console and not the emctl config auth oid command.
Prerequisites
Oracle Internet Directory LDAP server is set up and running.
Run the emctl config auth oid command on each OMS.
emctl config auth oid -ldap_host <ldap host> -ldap_port <ldap port> -ldap_principal <ldap principal> [-ldap_credential <ldap credential>] [-sysman_pwd <pwd>] -user_base_dn <user base DN> -group_base_dn <group base DN>
where:
ldap_host: LDAP host name
ldap_port: LDAP port
ldap_principal: The distinguished name (DN) of the LDAP user the WebLogic server should use to connect to the LDAP server.
ldap_credential: Password for the user specified by ldap_principal.
user_base_dn: The base distinguished name (DN) of the tree in the LDAP directory that contains users.
group_base_dn - The base distinguished name (DN) of the tree in the LDAP directory that contains groups.
Example:
emctl config auth oid -ldap_host "ldaphost" -ldap_port "3060" -ldap_principal "cn=orcladmin" -user_base_dn "cn=users,dc=us,dc=oracle,dc=com" -group_base_dn "cn=groups,dc=us,dc=oracle,dc=com" -ldap_credential "my_ldap_password" -sysman_pwd "my_sysman_password"
Stop the OMS.
emctl stop oms -all
Restart the OMS.
emctl start oms
Note:
For Enterprise Manager deployments consisting of multiple OMS instances, emctl config auth oid must be run on each OMS. Each OMS must be restarted in order for changes to take effect.
Testing the OID Configuration
Use the WebLogic Server Administration Console (Users and Groups tab) to check whether the OID configuration has been successful. To navigate to this tab, select Home/Summary of Security Realms/myrealm/Users and Groups. From the Users and Groups tab, you should see users and groups showing up from the OID.
Best Regards,
Venkat

Auto Discovery in SNMP

How to get 'Auto Discovery' feature from SNMP? Auto Discovery means get all IP addresses in LAN. Thanks in advance.

I think it seems like SNMP string issues. Please check at both CUOM and Device side for SNMP.
check
1. Network connectivity between CUOM and device
2. Check SNMP are working fine at device side.
3. Check SNMP configuration at CUOM
If there is problem and is fixed, please rediscover the device in CUOM.

OEM 12c installation is failed

Hi,
When I run install and configure a new fresh OEM 12c, I meet two errors:
Start Oracle Management Service failed.
Here is from installation log:
INFO: oracle.sysman.top.oms:Starting Oracle Management Server...
INFO: oracle.sysman.top.oms:Oracle Management Server Successfully Started
INFO: oracle.sysman.top.oms:Oracle Management Server is Down
SEVERE: oracle.sysman.top.oms:Starting of OMS failed.Agent Configuration Assistant failed.
Here is from installation log
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform methodBut when I check the status of OMS
[ordfpt1o@oem12c bin]$ ./emctl status oms
Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
WebTier is Up
Oracle Management Server is Up
[ordfpt1o@oem12c bin]$ ./emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host : oem12c.example.com
HTTP Console Port   : 7788
HTTPS Console Port : 7802
HTTP Upload Port    : 4889
HTTPS Upload Port   : 4903
SLB or virtual hostname: oem12c.example.com
Agent Upload is locked.
OMS Console is locked.
Active CA ID: 1
Console URL: https://oem12c.example.com:7802/em
Upload URL: https://oem12c.example.com:4903/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: oem12c.example.com
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: oem12c.ho.fpt.vn
[ordfpt1o@oem12c bin]$ How to solve this problem. I don't know where to start fixing this error. It makes me confuse
Edited by: duongkai on Dec 17, 2011 9:13 AM
Edited by: duongkai on Dec 17, 2011 9:16 AM

Hi,
From the outputs provided observed that the OMS is up from the status outputs.
Confirm if the accessing of console is possible using the following URL:
https://oem12c.example.com:7802/em
Best Regards,
Venkat

Request Recommendation on OEM 12c Environments

I will be installing OEM 12c CC version 12.1.0.2 on Oracle Linux 6.2 x86-64. We have limited funds and were trying to understand how different environments are used for OEM 12c CC. How there setup.
I am uncertain whether a second Test server is necessary. I can imagine that it's possible to have only one server as long as careful recovery procedures are in place and sufficent time is available for patching and upgrades. How are environments typically setup for OEM 12c CC? Given that targets are already monitored by Prod what does Test manage?
Thanks.

Based on what you've said, the usage of a Test System on a VM would be sufficient. My problem will be to find targets to connect to it. I'll have large periods of time when I won't want the VM running in which case the agent will be out of contact with OMS on VM. I don't know exactly how to handle that.
I am sure that larger organizations would desire to perform more types of testing (Performance etc.) to mitigate there risk based on the usage of there OEM 12c Cloud Control System; therefore they may have more environments and hardware to match.
Any additional feedback would be appreciated.
Thank you.

How to configure AA on Unity ?

How to configure Auto Attendant on Unity ?For example ,outsider caller dial AA number ,it answer the opening greeting ,then you can transfer to reception with pressing 0 or transfer to extension with pressing number.I do it as following ,but I think something is wrong ,help me .
1 add a CTI router point associated with a AA number on CCM and create it's voice mail on unity .And forward all to voice mail.
2 on Opening Greeting Call handler, set personal opening greeting ,no transfer incoming calls(send directly to handler'greeting). the other configuration of call handler is default
3 on operator Call handler ,transfer the incoming call to an extension ,for example reception extension.the other configuration of call handler is default.
But now ,I find when I dial AA number from outside ,I can hear the opening greeting and press 0 to trensfer reception ,but if presss extension number ,I hear the busy tone .Why ?

This can be done by configuring call handler(s). For the Call Handler you can set the 'Active Schedule' which let you activate the different greeting depending on the time. For your human attendant, you can configure CFNA/CFB to the Unity attendant extension. For more information please check the Unity Administration guide (section Call Handler)
Try:
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a00803f82eb.shtml
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity31/sag/sag31/index.htm

How to view Dehydration Store Performance in OEM 12c Cloud Control

Hi All,
I have installed OEM 12c Cloud Control.I want to view dehydration store performance for my fusion middleware domain.Can anyone please suggest me how can I achieve this?
I have added the database, where soa schemas are created, as a monitored target in OEM 12c Cloud Control. Also have added Fusion middleware domain for which I want to view dehydration store management.
Thanks in Advance!!
Edited by: Roshni Shankar on Sep 19, 2012 5:26 AM

You should open an SR and support can assist you with it. The only current case where that feature is known to not work is in the case where the Dehydration Store is running on RAC. Otherwise, it should be possible to get it to work. The main thing is that you need to have DB configuration properties (host, port, sid) that have a 3-way string match between the JDBC data source configuration in the WLS server, the JDBC properties you add to the Monitoring Properties of the SOA Infrastructure target, and the connect settings of the Database target in EM that matches to the dehydration DB.
If there isn't a match in all 3, the Dehydration Diagnostics page will not work. But again, to look into your specific setup, you should file an SR and work with support.

How to configure Auto Discovery in OEM 12c

Similar Messages

Maybe you are looking for