How to configure boe.properties file in ACTool for SAP BO Distributed environment

Hi ,
I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier) and Explorer servers.
1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
2. Is it required to install SMD_Agent and Host_Agent in Tomcat Server and Explorer server (in my case i have already installed).
3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
Regards
Pramod

Similar Messages

How to configure Java Properties File location in WLW

How do we tell Workshop 7.0 where to look for Java properties files (loaded by
PropertyResouceBundle in code) ?
Thanks,
Ray

Ray,
The build number indicates that you have not upgraded to Service Pack 2 of
version 7.0. I will strongly recommend you to do so. That will shield you
from the issues which were fixed in the 2 service packs.
Regards,
Anurag
"Ray Yan" <[email protected]> wrote in message
news:[email protected]...
>
Raj,
We are using WebLogic Workshop Build 7.0.1.0.0829.0 on Windows 2000.
We shut down the WebLogic Server on Solaris 2.6, log off, log back on,startWebLogic
in production nodebug mode, and re-run jwsCompile on the same source code.The
error does not occur anymore. Everything seems to be fine now.
Thanks,
Ray
"Raj Alagumalai" <[email protected]> wrote:
Hello Ray,
Can you let me know if you are using the GA version of WebLogic Workshop
or
if you have the latest Service Pack.
Thank You,
Raj Alagumalai
WebLogic Workshop Support
"Ray Yan" <[email protected]> wrote in message
news:[email protected]...
Anurag:
Thanks for your response!
By moving the property files to WEB-INF/classes from WEB-INF, we arealmost there.
But we have a follow up problem. We use a static initializer to loadthe
log4j
property file like this:
static {
try {
ClassLoader cl= (new Log()).getClass().getClassLoader();
InputStream is = cl.getResourceAsStream(logfile);
Properties props = new Properties();
props.load(is);
PropertyConfigurator.configure(props);
} catch (Exception e) {
e.printStackTrace();
When we run jwsCompile, we keep getting this:
Compiling: com/****/TestWS.jws
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[weblogic.management.Admin
may only be used on the Server ]
at weblogic.management.Admin.getInstance(Admin.java:104)
at
weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrin
cipalValidatorImpl.java:79)
at
weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipal
ValidatorImpl.java:59)
at
weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(Privileg
edActions.java:70)
at java.security.AccessController.doPrivileged(Native Method)
at
weblogic.security.service.SecurityServiceManager.createServerID(SecurityServ
iceManager.java:1826)
at
weblogic.security.service.SecurityServiceManager.getServerID(SecurityService
Manager.java:1839)
at
weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServic
eManager.java:538)
at
weblogic.security.service.SecurityServiceManager.getCurrentSubjectForWire(Se
curityServiceManager.java:1737)
at weblogic.rjvm.RJVMImpl.getRequestStream(RJVMImpl.java:434)
at
weblogic.rmi.internal.BasicRemoteRef.getOutboundRequest(BasicRemoteRef.java:
88)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:255)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:230)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(Unknown
Source)
atweblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:337)
atweblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:332)
at javax.naming.InitialContext.lookup(InitialContext.java:345)
at weblogic.knex.bean.EJBGenerator$1.run(EJBGenerator.java:101)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:780)
atweblogic.knex.bean.EJBGenerator.lookupAdminHome(EJBGenerator.java:84)
atweblogic.knex.bean.EJBGenerator.ensureAdminHome(EJBGenerator.java:122)
at weblogic.knex.bean.EJBGenerator$6.run(EJBGenerator.java:660)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:821)
atweblogic.knex.bean.EJBGenerator.generateJar(EJBGenerator.java:482)
at
weblogic.knex.dispatcher.DispJar.generateJar(DispJar.java:401)
atweblogic.knex.dispatcher.DispCache.ensureDispUnit(DispCache.java:695)
atweblogic.knex.compiler.JwsCompile.compileJws(JwsCompile.java:872)
at
weblogic.knex.compiler.JwsCompile.compile(JwsCompile.java:619)
at weblogic.knex.compiler.JwsCompile.main(JwsCompile.java:109)
ejbc successful.
Generating EAR ...
The EAR was generated and we can even deploy it on Solaris. But whatdoes
the
AssertionError mean?
Thanks,
Ray
"Anurag Pareek" <[email protected]> wrote:
Ray,
ResourceBundle looks for the properties file in the current thread's
classpath.
Since a Workshop webservice's project is nothing but a webapp, the
properties files can be kept in the WEB-INF/classes directory, which
is part
of the webapp classpath.
You can also use
Thread.currentThread().getContextClassLoader().getResourceAsStream("MyProp
s
properties"); to get access to the properties file.
Thanks,
Anurag
"Ray Yan" <[email protected]> wrote in message
news:[email protected]...
How do we tell Workshop 7.0 where to look for Java properties files(loaded by
PropertyResouceBundle in code) ?
Thanks,
Ray

How to read from properties file

Hi,
I am using JSR 168.
while creating a new portlet, a folder gets created with the name as "portlet". Under which is resource package and <PortletName>Bundle.java.
pls tell me how to read from .properties file.
waiting eagerly for some reply
Thanks & Regards,
HP
Edited by: user9003827 on Apr 13, 2010 3:42 AM

I think i have mixed it up :)
I have looked at it again and believe you are using regular JSP portlets.
Can you tell what you want to achieve by reading .properties file. Are you meaning the preferences of the portlet or what exactly are you trying to do?
Reading propertie files is easy:
// Read properties file.
Properties properties = new Properties();
try {
properties.load(new FileInputStream("filename.properties"));
String myKey = properties.getProperty("yourKey");
} catch (IOException e) {
}Edited by: Yannick.O on 13-Apr-2010 05:52

How to deploy BI on EHP1 for SAP NetWeaver Composition Environment 7.1

Hello Gurus,
i have installed SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version at home on vista 32 bits.
it's running well...
next i have installed EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version
and follow this guide :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1
the portal is running well....coooool.. ( http//:localhost:50100/irj/portal)
after i follow this documentation to create some cubes on BI abap trail (client 001).
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
i create my report with the query designer,
and i see my bi report with transaction RSRT and ABAP WEB tab ( http://localhost:80000)
it's running well....whaooouuu !!!!
Now i'm lost, i would like to deploy my bi report on the portal, but i don't know what i must do.
( and when i try with the query designer or rsrt + java web i have a error message )
- perhaps create an user communication between portal/bi abap where ?
- how to deploy bi java on portal (EHP1 for SAP NetWeaver Composition Environment 7.1)
by the way, i can't find the bi post install template in the configuration wizard on the the portal...
thank's for your help.
Florent,
Edited by: Florent BUTTY on Mar 24, 2009 1:43 PM

Hi,
Can you please tell me what is the diff between 7.01 & 7.1? if you can share any docs, is highly appreciated.
Thanks,
Kiran

Is this how to use a properties file?

Hi:
The following is how I intend to create and read a properties file, please verify for me that the idea is correct.
1. create myProp.properties
2. in myProp, the content is like such:
a=myA
b=myB
c=myC
3. In my application,
FileInputStream in = new FileInputStream(getClass().getResourceAsStream("/myProp.properties"));
Properties p = new Properties();
p.load(in);
String a = p.getProperty("a");
String b = p.getProperty("b");
String c = p.getProperty("c");Thanx!

It depends on what youare doing but if you have a set of properties that you are going to always use from one running of the application to the next, they should generally be defined as static finals.
For example, lets say you want a configuration file for an application that holds the user's preferences. You might want something like this:
public class Preferences {
   private static final String ALWAYS_ON_TOP = "always on top";
   private Properities preferences = new Properties();
   static {
      //load the file
   public boolean setAlwaysOnTop(boolean alwaysOnTop) {
      preferences.put(ALWAYS_ON_TOP, String.valueOf(alwaysOnTop));
   public boolean getAlwaysOnTop() {
      return Boolean.valueOf(preferences.get(ALWAYS_ON_TOP));
   public void save() {
      /save file
}

How to read the properties file available in Server File structure in webdy

hi all,
I have developed one webdynpro application. In this application i need to access mdm server to continue. For getting the connection i need to pass the IP addresses.
Can i have code how to read the properties file which is residing in the server file. with out included along with the application. keeping some where in the file structure in the server. I want to read that properties file by maintain the iP addresses and users in properties file based on the key i want to read like below.
servername="abcServer"
username="john"
password="test123"
Please send me the code how to read this properties file from the file structure and how to read this values by key in webdynpro application
Regards
Vijay

Hi Vijay,
You can try this piece of code too:
Properties props = new Properties();
//try retrieve data from file
//catch exception in case properties file does not exist
try {
         props.load(new FileInputStream("c:\property\Test.properties")); //File location
         String serverName = props.getProperty("servername"); //Similarly, you can access the other properties
         if(serverName==null)
           //....do appropriate handling
     }     catch(IOException e)
               e.printStackTrace();
Regards,
Alka.

How to configure the .ini file with applet

hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browser

Hi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu

How to configure java.security file to run j2ee programs

Hi,
I am using Sun one application server to run my j2ee programs.
plz tell me how to configure java.security file inside my appserver so that i can run my servlet program that is using jsse API to create SSL sockets.
I am not able to follow whats there in java.security file.Kindly tell how to configure it.
Waiting for ur replies!
Thanks,
Akshatha

Hi,
I am using Sun one application server to run my j2ee programs.
plz tell me how to configure java.security file inside my appserver so that i can run my servlet program that is using jsse API to create SSL sockets.
I am not able to follow whats there in java.security file.Kindly tell how to configure it.
Waiting for ur replies!
Thanks,
Akshatha

Can AnyOne Please Tellme How to configure the HTML files

This is very Urgent.
1.I am using the WLS7.0 sp1 .I need to configure theHTML files which are in a
different path how can I map them to the present DefaultWebAPP directory.
2. How can I get rid of the port number when I am fully using in production mode.
I have been posting this query since long but in vain. Please guide me

1. I got rid of port number with link provided by the karthik.
2.How can I create a link .The link appends to the defaultwebapp directory
and checks from their .I need to know how to configure the
HTML files which are not in the DefaultWebApp.But completely in directory.
Any suggestions !!!!!!!
Shehzad <[email protected]> wrote:
1. You can create a link to that directory
2. In order to get rid of port number, either boot weblogic at default
port 80, or use Apache or Iplanet webserver, and use Weblogic plugin.
That way all the traffic comming in from http will comein at port 80
to the webserver, and would then be forwarded to Weblogic at whatever
port it is booted.
This is very Urgent.
1.I am using the WLS7.0 sp1 .I need to configure theHTML files whichare in a
different path how can I map them to the present DefaultWebAPP directory.
2. How can I get rid of the port number when I am fully using in productionmode.
I have been posting this query since long but in vain. Please guideme

How can i use JS files in ADF for language translation.

Hi,
I have JS for different languages and dn't want to convert them to property files(resource bundle files). How can i use JS files in ADF for language translation.
Thanks

Hi ILya Cyclone,
Thanks alotfor the reply. Can you tell me where should i include this in the jspx page.
Step 1)
I have the js file as js/ifl_messages_US.js and i created a resource file as you mentioned: JS_FILE_PATH=js/ifl_messages_US.js
Step 2)
Then added the entry in faces-config.xml for the resource file as follow:
<resource-bundle>
<base-name>resource_en.properties</base-name>
<var>resource</var>
</resource-bundle>
<locale-config>
<supported-locale>en</supported-locale>
</locale-config>
Step 3) This is my jspx page. In which a table is dynamically created on page load. Can you help me where should i enter the "#{resource.JS_FILE_PATH}"
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:resource type="javascript" source="/js/pdfFile.js"/>
<af:form id="f1">
<input type="hidden" name="checkRadio" id="checkRadio" value=""/>
<af:panelGroupLayout id="pgl1" halign="left" layout="vertical">
<af:image source="/images/BRAND_IMAGE.gif" id="i1"/>
</af:panelGroupLayout>
<af:spacer width="10" height="10" id="s1"/>
<af:table varStatus="rowStat" summary="table"
value="#{backingBeanScope.DummyBean.collectionModel}"
rows="#{backingBeanScope.DummyBean.collectionModel.rowCount}"
rowSelection="none" contentDelivery="immediate" var="row"
rendered="true" id="t1" styleClass="AFStretchWidth"
binding="#{backingBeanScope.DummyBean.myTableBinding}"
columnResizing="disabled">
<af:column id="c2" headerText="Actions">
<af:activeOutputText value="#{row.Actions}" id="aot2"/>
<af:goLink text="#{row.Actions}" id="gl1"
clientComponent="true" visible="false"/>
<af:selectBooleanRadio text="" id="sbr1"
valueChangeListener="#{backingBeanScope.DummyBean.checkselectbox}">
<af:clientListener method="selectCheckBox" type="click"/>
</af:selectBooleanRadio>
</af:column>
<af:forEach items="#{backingBeanScope.DummyBean.columnNames}" end="#{backingBeanScope.DummyBean.columnSize}"
var="name" begin="1">
<af:column sortable="false" sortProperty="#{name}"
rowHeader="unstyled" headerText="#{name}"
inlineStyle="width:100px;" id="c1">
<af:activeOutputText value="#{row[name]}" id="aot1" escape="false">
</af:activeOutputText>


</af:column>
</af:forEach>
</af:table>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks in advance

How to open a zip-file in Bridge for PC?

How to open a zip-file in Bridge for PC?

I think it's built in, just double click on it and it should open with Archive Utility. I dunno, maybe Unrar X might work for you>
JB

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

How to configure evaluations at level task only for released projects?

Hi,
Does anyone know how to configure evaluations at level task only for released projects?
What we need is that the evaluation will be executed only when project has released status. Is that possible?
Thanks a lot,
CAMILO URIBE

Hi CAMILO,
After the notes 1422722 & 1465106 is a service method available, which allow the customer to dis-able the evaluation.
CL_EVE_EXTRACT_FACTORY SET_ACTIVE
You can put a codes in some BADI method, which is called during save. Within the Badi-Implementation, call the SET_ACTIVE method, so that the evaluation not be tiggered (until the project get released.)
KInd regards,
Zhenbo

How can i compress a file to QT for web use?

how can i compress a file to QT for web use?

Shane, in the ProApps site, has a couple of applets (droplets?) that have the settings for doing just that.
www.proapptips.com
register (its free) and then head to the download section.
cheers,
x

How to configure boe.properties file in ACTool for SAP BO Distributed environment

Similar Messages

Maybe you are looking for