How to configure Custom Queues in B2B

Hi B2B Gurus,
Could any one tell us how to configure coustom queues in B2B
1. I created a AQ's in B2B database using scripts , could any one tell us how to configure these in B2B. Please elobrate step by step
2.In 10 G , document protocol parametrs we have interchange sender id and receiver ID, Group sender Id and receiver ID, but these parameters i am not able to find in 11G....
Regards
charls

Francis wrote:
Outbound:
We need to configure all outbound queues in ( host tp---> channels--->..have to select INTERNAM. OR Administration--->Listening channels--->Have to select INTERNAL)-- Please let me know where i have to configure outbound
Outbound:_ This the channel where you want the B2B to pick up messages and send to remote TP.
This has to be configured via AdminServer -> Listening Channels -> Configure your Listening channel and tick "Internal" to true.
Inbound:
In the same way where we have to configure the INbound queues(TP1_IN_Queue,TP2_IN_QUEUE, TP3_IN_QUEUE, TP4_IN_QUEUE).
Inbound:_ From what I understand, after processing messages received from Remote TP, you want B2B to pass messages to this channel.
To do that-
1.you need to configure the channel in Partners->Host->Channels-> Configure the channels here and ensure that the *"Internal"* property is set to true under the channel attributes.
2. In the inbound agreement, use the channel by using the drop down box under the Host found in bottom left corner.
Thanks,
Varun

Similar Messages

How to configure JMS queue on OC4J server. Development in JDeveloper 10G

Hi there,
I have to configure a JMS for an Asynchronous process in my Application which will be running in Oracle 10G Application Server. Development Environment is Oracle JDeveloper 10G.
I am facing a problem on how to configure JMS queue.
Steps Followed are:
in the <JDevloperHome>/j2ee/home/config
1. Made the new queue and connection factory's JMS entry in jms.xml.
2. Specifed the queue in oc4j-connectors.xml.
3. played around with application.xml
and tried all combinations, but the message producer always failed to lookup the queue.
Need help on the steps to follow so that the producer can post the message in the queue.
Also please help how to configure the MDB to listen to the queue.
Thanx and Regards
Subham

If you were dealing with Oracle 10g app server as opposed to standalone, I might be better able to help you.
One thing though, when you are configuring your MDB in the orion-ejb-jar.xml file, do not forget to specify attribute listener-threads, otherwise no matter how many beans you have in your MDB pool, only one bean will be listening to the queue. Many listener-threads equal to max number of beans in pool.

How to configure customer KB in partneer functions

hi,
sap gurus,
how to configure customer "KB" - partner function in partner determination procedure which is use ful for credit management.
plz help me on this
my id is [email protected]
regards,
balaji.t
09990019711.

Hi,
Go to
*IMG -- SD -- Basic functions -- partner determination -- setup partner determination -
Set Up Partner Determination for Customer Master ---*
Find the procedure which is assigned to your account group... you can view this at partner determination procedure assignment...
then select the procudure in partner detremination procedures. and then select the partner funtions in procedure... here add the partner funtion KB in partner funtion and mark it as mandatory by checking the check box in the last mandatory function
Muthu
Edited by: Muthupandiyan on Mar 28, 2008 2:02 PM

How to configure PGP Encryption in B2B Console including jar addition ?

Hi Guys,
I have the following questions with respective PGP Encryption.Can any one clarify on this?
I have PGP Encryption jave code which does not implement CallOut Interface and which encrypt's a file
1. is it mandatory that PGP Java code having a class to implement CallOut Interface ? if yes which methods i need to implement and necessary parameters required ?
2. In what way i can add jar to the server ? Please explain the format of call out jar path for windows and linux?
3. how can i check whether the pgp jar is loaded or not ?
4. Can any one explain the steps to configure PGP Encryption in B2B Console?
Edited by: 972723 on Jan 22, 2013 2:49 AM

How to configure Call out in B2B ?

How to configure custom error page in WebServer 6.1 if instance is down

Hi ,
I have deployed an application on port 82.
If the instance is down, want to configure custom error page in Sun One Webserver 6.1 so that the it displays a customised message rather than browser displaying its custom DNS error page.
In web.xml, configured the 404/500 error messages, but if the instance is down, my web application does not receive the request. So it should be defined at the root level.Where to configure the same?
Thanks for the help in advance.

You can use Error function "send-error" http://docs.sun.com/source/817-1834-10/crobjsaf.html#wp20007
It has an example
Error fn=send-error code=401 path=/sun/server61/docs/errors/401.html

How to configure customized rich text editor in a dialog

I have a customized rich text editor component in my project which i want to use it in a dialog component.
I tried by changing the xtype value from 'richtext' to the customized rich text editor path as '/apps/project1/components/shared/text_rte' but i am not able to see the editor.

See http://stackoverflow.com/questions/1946426/html-5-is-it-br-br-or-br for your <br> example. <br/> is XHTML, not necessarily needed in HTML5.

Need Help: How to configure/set-up custom interchange code values in B2B

Hello All,
Hope everybody is doing well.
We are currently facing a problem in implementing Inbound 850 Purchase Orders in B2B from one of our Trading Partners (Customer).
The Customer will be sending us EDI ANSI X12 ver 4010 Purchase Order files, but in the file they are sending a custom GS08 (8th element of GS Segment having Version/Release/Industry Identifier Code) value i.e. "004010RIFMAT".
The above value is not present in the Standard Code values when we define an ECS using B2B Document Editor.
Hence the document is failing in B2B since it is not able to identify the Trading Partner.
If anyone has faced similar issues, I would appreciate if you could let me know on how to configure the same in B2B. Please let me know the steps in detail.
Thanks In Advance.
Regards,
Dibya

Hello Dibya,
Can you create a new group ecs with appropriate codelist for GS08 and use it while modelling B2B flow. Make sure to undeploy and validate the agreement.
Rgds,Ramesh.

How toremove messages from JMS Queue?how to configure queue in spring?

Hi
I have Confiured a JMS configaration in spring applicationConfiguaration.xml file
<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
          <property name="brokerURL" value="tcp://localhost:61616"/>
          <property name="useAsyncSend" value="true"/>
     </bean>
     <bean id="queue" class="org.apache.activemq.command.ActiveMQQueue">
     <constructor-arg value="foo"/>
</bean>
     <bean id="broker" class="org.apache.activemq.xbean.BrokerFactoryBean">
          <property name="config" value="classpath:activemq.xml" />
          <property name="start" value="true" />
     
     </bean>
     <bean id="auditInterface"
          class="org.springframework.jms.remoting.JmsInvokerProxyFactoryBean">
<property name="serviceInterface" value="com.infiniti.gpn.auditing.AuditInterface"/>
<property name="connectionFactory" ref="connectionFactory"/>
<property name="queue" ref="queue"/>
</bean>
     <bean id="listenerContainer" class="org.springframework.jms.listener.SimpleMessageListenerContainer">
<property name="connectionFactory" ref="connectionFactory"/>
<property name="destination" ref="queue"/>
<property name="messageListener" ref="auditMessageListener"/>
     </bean>
Sender is sedning messages continusly messages that messages r storing in queue , these r acupying more memory in RAM , due to that jboss is restarting for each request, is there any way to clean up messages in Queue ? if it is there then how will configure that queue in apllicationConfiguaration.xml file?
Thanks in advance
Nara

I suggest posting your question on the [Spring Remoting and JMX forum|http://forum.springframework.org/forumdisplay.php?f=30].

How to remove messages from JMS Queue?how to configure queue in spring?

Hi
I have Confiured a JMS configaration in spring applicationConfiguaration.xml file
<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<property name="brokerURL" value="tcp://localhost:61616"/>
<property name="useAsyncSend" value="true"/>
</bean>
<bean id="queue" class="org.apache.activemq.command.ActiveMQQueue">
<constructor-arg value="foo"/>
</bean>
<bean id="broker" class="org.apache.activemq.xbean.BrokerFactoryBean">
<property name="config" value="classpath:activemq.xml" />
<property name="start" value="true" />

</bean>
<bean id="auditInterface"
class="org.springframework.jms.remoting.JmsInvokerProxyFactoryBean">
<property name="serviceInterface" value="com.infiniti.gpn.auditing.AuditInterface"/>
<property name="connectionFactory" ref="connectionFactory"/>
<property name="queue" ref="queue"/>
</bean>
<bean id="listenerContainer" class="org.springframework.jms.listener.SimpleMessageListenerContainer">
<property name="connectionFactory" ref="connectionFactory"/>
<property name="destination" ref="queue"/>
<property name="messageListener" ref="auditMessageListener"/>
</bean>
Sender is sedning messages continusly messages that messages r storing in queue , these r acupying more memory in RAM , due to that jboss is restarting for each request, is there any way to clean up messages in Queue ? if it is there then how will configure that queue in apllicationConfiguaration.xml file?
Thanks in advance
Nara

Hi,
Even i have a similar kind of requirement where in, i want to clear the JMS Queue Message programmatically, on certain condition.
i am using Spring JMS. The JMS Queue has a listener. In the listener we want to clear the Queue contents based upon the condition.
If anybody has any idea about this, please reply back.
Thanks in Advance.
Manjunath.

How to configure a JMS Queue

Hi,
I have an EAR file thai includes an EJB 3.0 module with a MDB. I use a Queue.
This is my code,
@Resource(mappedName = "jms/NotificationQueue")
private Queue notificationQueue;
@Resource(mappedName = "jms/NotificationQueueFactory")
private ConnectionFactory notificationQueueFactory;
public Customer update(Customer customer){
Customer updated = em.merge(customer);
try {
sendJMSMessageToNotificationQueue(updated);
} catch (JMSException ex) {
Logger.getLogger(CustomerSessionBean.class.getName()).log(Level.SEVERE, null, ex);
System.out.println("Customer updated in CustomerSessionBean!");
return updated;
private Message createJMSMessageForjmsNotificationQueue(Session session, Object messageData) throws JMSException
//Modified to use ObjectMessage instead
ObjectMessage tm = session.createObjectMessage();
tm.setObject((Serializable) messageData);
return tm;
private void sendJMSMessageToNotificationQueue(Object messageData) throws JMSException
Connection connection = null;
Session session = null;
try
connection = notificationQueueFactory.createConnection();
session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
MessageProducer messageProducer = session.createProducer(notificationQueue);
messageProducer.send(createJMSMessageForjmsNotificationQueue(session, messageData));
finally
if (session != null)
try
session.close();
catch (JMSException e)
Logger.getLogger(this.getClass().getName()).log(Level.WARNING, "Cannot close session", e);
if (connection != null)
connection.close();
layed inside a stateless EJB 3.0.
And the MDB looks as follow,
@MessageDriven(mappedName = "jms/NotificationQueue", activationConfig = {
@ActivationConfigProperty(propertyName = "acknowledgeMode", propertyValue = "Auto-acknowledge"),
@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue")
public class NotificationBean implements MessageListener {
public NotificationBean() {
public void onMessage(Message message)
try
Object msgObj = ((ObjectMessage)message).getObject();
if (msgObj != null)
Customer customer = (Customer)msgObj;
System.out.println("Customer with the following details has been updated:");
StringBuilder sb = new StringBuilder();
sb.append("Customer ID=");
sb.append(customer.getCustomerId());
sb.append(", ");
sb.append("Name=");
sb.append(customer.getName());
sb.append(", ");
sb.append("Email=");
sb.append(customer.getEmail());
System.out.println(sb.toString());
catch (JMSException ex)
Logger.getLogger(NotificationBean.class.getName()).log(Level.SEVERE, null, ex);
I have configured both "jms/NotificationQueue" and "jms/NotificationQueueFactory" inside OC4J server.
But when I try to deploy the EAR file, the server gives me the following error,
Operation failed with error: No destination location set for message-driven bean NotificationBean
How must I do to let the EAR file be deployed?
Thanks in advance
Jose

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

How to configure service endpoints of custom webservice in SharePoint 2013?

Hi,
I have created a custom webservice in SharePoint 2013. I placed it in a sub folder under the ISAPI folder. I followed the instructions of this article: http://msdn.microsoft.com/en-us/library/office/ff521581(v=office.14).aspx. The webservice works
great, however when I try to send a large file I get the message "413 Request entity is too large".
After some searching I found out that you can create a web.config in the subfolder and define the endpoints and bindings, after which I get an error that there is already an endpoint defined for the specified URI. I believe this has something to do with
the BasicHttpBindingServiceMetadataExchangeEndpointAttribute but I'm not sure.
Can anyone help me solve this issue?
Regards,
Sander

Hi,
According to your post, my understanding is that you want to configure service endpoints of custom webservice in SharePoint 2013.
Per my knowleadge, after you add a reference to Microsoft.SharePoint.Client.ServerRuntime, you can use the BasicHttpBindingServiceMetadataExchangeEndpointAttribute.
In VS go to the add reference and paste the following: C:\Windows\assembly\GAC_MSIL\Microsoft.SharePoint.Client.ServerRuntime.
In addition, please make sure you create the custom web service correctly.
For more information, you can refer to:
SharePoint 2013: Create a Custom WCF REST Service Hosted in SharePoint and Deployed
in a WSP
How to create Custom Web Service WCF (REST) in SharePoint 2013
Adding custom WCF services to a SharePoint 2013 farm solution using Visual Studio 2012
"BasicHttpBindingServiceMetadataExchangeEndpointAttribute" could not be found
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How to configure a custom link in ESS for LTA?

I have a requirement to display a pop-up alv report, once user click on a link "Leave_Details" in ESS. I am able to display pop-up alv but background screen is empty as its a separate WD application however I want that as soon as user selects any row from that popup alv it should be fetched and displayed on the LTA screen of Portal. It seems link is not configured so its displaying blank background screen while for other standard links this screen is displayed.
Kindly help in this how we can display a custom link in ESS and after fetching any single record it should be closed and single row would be displayed in LTA screen.
Here the background ESS screen is blank for custom link displaying this pop-up alv.
For other standard links ESS screen is displaying.

Hi Samuli,
Thanks for your reply however here I am not asking how to create popup, it has already created however my question is, how to configure the link used to display that popup alv?
As shown in the screen as soon as user clicks on the given link shown in below screenshot this popup is displayed,
and after clicking on this link, below screen is displayed
Here background screen is empty whereas it should display the ESS screen in the background, so as soon as user select any row from the popup alv, i'll pass the data into ESS screen using BADI.
Kindly revert with possible solution.

How to configure Queue and QueueConnectionFactory for a MDB

Hi *,
I want to send some messages from a session bean to a message driven bean. Therefore I'll use the default Queue (sapDemoQueue) and QueueConnectionFactory.
In the ServiceLocator of my SessionBean I do the lookup with following methods:
    public QueueConnectionFactory getQueueConnectionFactory() throws NamingException {
        if (queueConnectionFactory == null) {
            Object obj = ctx.lookup("jmsfactory/default/QueueConnectionFactory");
            queueConnectionFactory = (QueueConnectionFactory) obj;
        return queueConnectionFactory;
    public Queue getQueue() throws NamingException {
        if (queue == null) {
            Object obj = ctx.lookup("jmsqueues/default/sapDemoQueue");
            queue = (Queue) obj;
        return queue;
My Message Driven Bean is configure as followed:
ejb-jar.xml:
<message-driven>
<ejb-name>ExportBean</ejb-name>
<ejb-class>de.test.ejb.abschluss.ExportBean</ejb-class>
<transaction-type>Container</transaction-type>
<message-driven-destination>
    <destination-type>javax.jms.Queue</destination-type>
</message-driven-destination>
</message-driven>
ejb-j2ee-engine.xml:
<enterprise-bean>
<ejb-name>ExportBean</ejb-name>
<message-props>
    <destination-name>jmsqueues/default/sapDemoQueue</destination-name>
    <connection-factory-name>jmsfactory/default/QueueConnectionFactory</connection-factory-name>
</message-props>
</enterprise-bean>
I also create a jms-factories.xml and a jms-destination.xml.
EAR-Project/META-INF/jms-factories.xml:
<jms-factories>
<connection-factory>
    <factory-name>jmsfactory/default/QueueConnectionFactory</factory-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/QueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>localhost</provider-url>
      <security-principal>Administrator</security-principal>
    </context-factory-type>
    <client-id></client-id>
</connection-factory>
</jms-factories>
EAR-Project/META-INF/jms-destination.xml:
<jms-destinations>
<destination>
    <connection-factory>jmsfactory/default/QueueConnectionFactory</connection-factory>
    <destination-name>jmsqueues/default/sapDemoQueue</destination-name>
</destination>
</jms-destinations>
How to configure correctly?
Does anybody an example how to configure?
Where may I download the example of the SAP documentation at http://help.sap.com/saphelp_nw04/helpdata/en/3d/41bee546e94ad48537f2cf06a29818/frameset.htm
Thank a lot,
Juergen

Hello Vesselin
My deployment descriptors:
ejb-jar.xml
          <session>
               <ejb-name>MonatsabschlussBean</ejb-name>
               <home>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussHome</home>
               <remote>de.filiadata.leistungserfassung.ejb.abschluss.Monatsabschluss</remote>
               <local-home>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussLocalHome</local-home>
               <local>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussLocal</local>
               <ejb-class>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussBean</ejb-class>
               <session-type>Stateless</session-type>
               <transaction-type>Container</transaction-type>
               <resource-ref>
                    <res-ref-name>FdlbQueueConnectionFactory</res-ref-name>
                    <res-type>javax.jms.QueueConnectionFactory</res-type>
                    <res-auth>Container</res-auth>
               </resource-ref>
               <resource-env-ref>
                    <resource-env-ref-name>FdlbQueue</resource-env-ref-name>
                    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
               </resource-env-ref>
          </session>
          <message-driven>
               <ejb-name>ExportBean</ejb-name>
               <ejb-class>de.filiadata.leistungserfassung.ejb.abschluss.ExportBean</ejb-class>
               <transaction-type>Container</transaction-type>
               <message-driven-destination>
                    <destination-type>javax.jms.Queue</destination-type>
               </message-driven-destination>
               <resource-ref>
                    <res-ref-name>FdlbQueueConnectionFactory</res-ref-name>
                    <res-type>javax.jms.QueueConnectionFactory</res-type>
                    <res-auth>Container</res-auth>
               </resource-ref>
               <resource-env-ref>
                    <resource-env-ref-name>FdlbQueue</resource-env-ref-name>
                    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
               </resource-env-ref>
          </message-driven>
ejb-j2ee-engine.xml
          <enterprise-bean>
               <ejb-name>MonatsabschlussBean</ejb-name>
               <session-props/>
          </enterprise-bean>
          <enterprise-bean>
               <ejb-name>ExportBean</ejb-name>
               <message-props>
                    <destination-name>FdlbQueue</destination-name>
                    <connection-factory-name>FdlbQueueConnectionFactory</connection-factory-name>
               </message-props>
          </enterprise-bean>
jms-factories.xml
<jms-factories>
<connection-factory>
    <factory-name>FdlbQueueConnectionFactory</factory-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/XAQueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>localhost</provider-url>
      <security-principal>Administrator</security-principal>
      <security-credentials></security-credentials>
    </context-factory-type>
</connection-factory>
</jms-factories>
jms-destinations.xml
<jms-destinations>
<destination>
    <connection-factory>FdlbQueueConnectionFactory</connection-factory>
    <destination-name>FdlbQueue</destination-name>
</destination>
</jms-destinations>
And I'll put mit ServiceLocator:
    public QueueConnectionFactory getQueueConnectionFactory() throws NamingException {
        if (queueConnectionFactory == null) {
            Object obj = ctx.lookup("java:comp/env/FdlbQueueConnectionFactory");
            queueConnectionFactory = (QueueConnectionFactory) obj;
        return queueConnectionFactory;
    public Queue getQueue() throws NamingException {
        if (queue == null) {
            Object obj = ctx.lookup("java:comp/env/FdlbQueue");
            queue = (Queue) obj;
        return queue;
Kind Regards,
Juergen

How to configure a error queue for weblogic jms topic

Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
Mingzhuang

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

How to configure Custom Queues in B2B

Similar Messages

Maybe you are looking for