How to configure Dialog server,not installation of Dialog instance?

Plz answer to this u'gently

As it turns out, OAS does allow the use of source files without deploying your code. You do have to compile and restart the J2EE container (well, I have been restarting the entire Service, but no doubt the same can be scripted to use 'opmnctl'. I determine that today.
To allow OAS see your souce code, you have to make a small change.
(1) In server.xml, comment out your entry, e.g.

(2) Modifiy default-web-site.xml, e.g.

<web-app application="default" name="emeraldb71" load-on-startup="true" root="/emeraldb71" />
(3) Add the <web-module> entry in application.xml, e.g.
<web-module id="emeraldb71" path="E:\MES\Emerald\emeraldb71" auto-start="true" />
(4) Restart the Service or potentially an 'opmnctl' command.
Your changes to JSP code are immediate, i.e. no recompilation or server restart required. Changes to Java code must be recompiled and the Service restarted.
I am thinking that between JUnit testing for compiled code and this ability to see JSP changes immediately I can significantly reduce my code/debug cycle.

Similar Messages

How to configure http server in oracle 10g

Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
Arshad

Hi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph

How to configure Proxy server on Solaris 10 - SPARC

Hi All
Please guide on how to configure Proxy server on Solaris 10 - SPARC ?
What tool should be used?

Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using?

Configure Job Server    [NOT INSTALLED] in Linux

Hello All,
I installed IPS and DS 4.3 SP3 on it in Tomcat in linux environment .
In server manager i found "Configure Job Server    [NOT INSTALLED]"
So how do i install this component.
Regards,
Aisurya

Hi Puhan,
Please refer the below steps for configuration of Job Server:
(a) Log in Linux
(b) Go to BODS Directory
(c) Run below command
$ . ./al_env.sh
$ ./svrcfg
(d) Below details will appear
** Data Services Server Manager Utility **
       1 : Control Job Service
       2 : Configure Job Server
       3 : Configure Runtime Resources
       4 : Configure Access Server
       5 : Configure SNMP Agent
       6 : Configure SMTP
       7 : Configure SSL
       8 : Configure Native Component Supportability
       x : Exit
(e) Enter 2
(f) Then Enter the New Job Server name: JOb_Server
(g) Then Enter Port Number:3500 (Enter Port Number as per your environment)
(h) Then SNMP Enable: Y
(i ) Then Adapter management
Port Number: 4001 (Enter Port Number as per your environment)
(j) SSL Protocol: Y
(k) Enable SNMP: N
(l) Now Enter Database details
After that below page will update with JOb Server Information associated with Local repository
Hope this will help!!!!
Thanks,
Daya

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

How to Configure Exchange server in EP6.0

Hi
How to configure mailing server in Portal
With Regards
Azhar

Hi Azhar
You can specify your mail server on the Portal.
Go to System Administration -> System Configuration -> UM Configuration.
You will find a field there to specify your mail Server.
You may also have to specify this in the config tool of your WAS Server to enable email notification
Take a look at <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/07/9bda3d5ed05610e10000000a114084/frameset.htm">this</a> .
Hope that helps.
Best Regards
Priya

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

How to configure SMTP server in OSB eclipse platform

how to configure the SMTP server in OSB eclipse platform......
secondly.................the output email shud contain message sent and not the overview of the mail how do i do it

How to configure the server? That depends on what server it is. If you are the administrator I would suggest finding the help file for the server and searching for the term "relaying". However I hope you are not, and can ask the real administrator.

How to Configure Directory Server 6 In configure later mode

Hi ,
I would like to know how to configure the directory server in configure later mode.
I have done it in JES4 using the directoryserver command. Which is the command to be used in JES5 for configuring the directory server after the binaries are installed.
It would be great if anyone could refer me to the documentation for the configure later mode.
Thanks,

There has been quite a few posts on blogs.sun.com with regards to configuring DS instances after installation.
It is part of the installation guide as far as I can remember.
Check <http://blogs.sun.com/marginNotes/entry/the_version_6_cli%3A_getting>
Regards
Ludovic,

How to configure report server in 9iDS

I am usin P4 and trying to configure report server for 9iDS. But, surprisingly there is no conf file in the \orant\reports\server path after complete installation of 9iDS.
How should I configure the report server?
Take care,
Tarek

tarek,
we released a new whitepaper last week about configuring the reports services with iDS for testing your reports. you can find this whitepaper in the reports section here on OTN.
however. you can either create the reports config file manually or it is created automatically for you if you start up a server and there is no corresponding config file already defined.
regards,
philipp

How to configure email server so that I can reply without "relaying" issues

I've setup the Snow Leopard Server 10.6 and setup the email server. The problem we have is that when a user sends an email using an ISP other than the one where the server is connected, or replys to an email using a different ISP it gets bounced with the message that our server doesn't allow relaying. That is correct. We didn't set it up to relay because of concerns that we might be blacklisted as a spammer. Can you tell me how to configure the email server settings so we don't have this bounce problem and can send and reply using our domain.com email address regardless of the ISP we're connect to? Thanks

Such a seemingly innocuous question. If only the answer were that simple.
There are many factors in getting a working mail server.
For one, if you expect to receive incoming mail for your domain you will need a static IP address with matching forward and reverse DNS entries. You might already have this, or you might not. You don't say anything about your network environment to know.
Once you've addressed the network side of things there are two common elements to implement.
First is you tell the server about your local networks - the ones that you trust users on. Typically this is your private LAN (e.g. a 192.168.x.x network) where your users are. This works well for an office environment and lets users send mail unhindered, but doesn't cater to remote users (you probably cannot whitelist all the remote user's IP addresses, especially those that are mobile).
For those users you implement SMTP Authentication. This ensures the mail client authenticates to the server using a valid username and password. If your user can authenticate then you inherently trust them and allow the mail to be relayed. If the user is remote and cannot authenticate then they're out of luck.
All of this can be configured in Server Admin.

How to configure mail server

Hi All,
we are in a process of configure mail server in one of our sap instance.
i have done the following settings,
1. In t-code sicf      under virtual host SAPCONNECT,
2.   I have added in host data * : *
3.under handler list CL_SMTP_EXT_SAPCONNECT.
4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
5.on double clicking on SMTP i have added the following entries
SMTP CONNECTIONS : mail host : smtp.gmail.com
                                           port : 465
                                       code page : 0
SUPPORT ADDRESS TYPE : i have set internet address to *
did i miss any of the steps in configuring the SMTP mail server.
after sending the mail when i look in to t code sost the message number displays "672"
please advice how can i configure mail server for incoming and outgoing
Thanks in advance,
Vardhan

Hello Vardhan,
I suggest you to go through the below links and cross check the configuration.
http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM

How to configure mail server for subscription

Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
Ray

Hi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray

How to configure report server in 10.1.2

Hi all,
I have 10gDEV,AS10G and AS infrastructure on my system.I want to issue the following command to install report server but it is not working "rwserver -install reptest" ..... Any body know how I install this server in 10.1.2.0.2 Rel of 10g...Any idea?????
Regards

You don't specify your OS, anyway see http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_strt.htm#sthref104
where you can see
Beginning with Oracle Reports 10g Release 2 (10.1.2), running Reports Server as a Windows service is no longer supported (rwserver -install server_name).

How to configure Broadcasting server in SAP?

Hi,
We are trying to use pre caluculation using broadcasting for queries, for this broadcasting server needs to be configured in the system...
We are using SAP-BI 7.0, Can anybody let us know the step by step solution to configure Broadcasting server
rgds,
KN RAO

Hi,
This links gives you a good idea on what broadcasting exactly is:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm
Please refer to the link below to hava a general idea on how broadcasting must be configured,you will find information specific to collaboration:
http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
Also check :
How to install and configure a boradcasting server ?
-Vikram

How to resolve: "Update server not found (check your internet connection)"?

When doing Help / Check for Updates, I get "Update server not found (check your internet connection)". This has been the case for 6-8 weeks or longer but auto update worked fine before. Not sure if something changed on my MacBook Pro. If so, I can't pinpoint it.
MacBook Pro (Intel Core 2 Duo)
Mac OS 10.6.6
Firefox 3.6.13
Firefox set to "No Proxy"

See iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

How to configure Dialog server,not installation of Dialog instance?

Similar Messages

Maybe you are looking for