How to configure HR Process Workbench for Payroll?

I want to automate the post payroll activities - posting, printing payslips etc via the Process Workbench. Can anyone provide me with the steps.

Dear Payal,
Please go through the below SAP documentation on HR process workbench.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BATCH.pdf
Regards,
Dora

Similar Messages

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How to configure returns process if ware house management is configured

hi,,
sap gurus,
how to configure returns process if ware house management
is configured.
bcz total ware house management is configured but
not with returns process
plz help me on this.
regards,
balajit
09990019711

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How to configure Automatic Account Clearing for A/R

Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
Sunitha

Hi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure Workflow Notification Mailer for oracle alert in R12

Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
Madhan

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

How to Configure OIM 9.1 for Request-Based Provisioning

Hi experts,
I am new to OIM and need to know how to configure request based provisioning. Here is the scenario.
My environment has two target systems (Sun LDAP and Novell EDirectory) configured for provisioning to OIM 9.1
A user should be able to login, request either or both (SUN LDAP and EDir) for self or others.
Now the request should go to an admin for approval.
Once approved, the requested accounts should be created on the target systems.
Please guide me on the procedure to be followed.
Many thanks in advance

You will have to download the standard out of box connector for these target systems & will have to import it through the Deployment manager into OIM. Then you will have to create the Process definition of approval type & attach it to the same resource object. Please read the belo link before implementing any thing. This will provide you a better idea.
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363.pdf

How to configure server process in sld add server in configtool

hi friends
i have added the server process in configtool after restaring the server sld server is stoped it not staring and it gives a messge that configur server process in sld adiminstration
can any one help how to configure the server in sld ?
and what are ther prerequesties that i need to take when i am adding sever proces in configtool and how many server proces i can add in the java engin
after incersing server proces how to configur in sld ?
regards
raja

hi janu
thanks for responding
i know how to configur was abap and was java in sld. i have issue when i add 2 server process in configtool , sld server is stoped there it is giveing maintal profile in the sld administration. i would like to know what need to me manintatinge in sld this is my issue .
regards
raja

How to configure jobwork process in Co

Hi,
In our business process in one of operation we need to send the material to jobwork and client want to track that amount and want to include in cost rollup?
In out scenerio, first two operations will be held inside and third operation will be sent to vendor, after it returns to company 4th operation will be happend again in company.
Some times company will pay the amount based on fixed charges and some times based on activities performed.
And how to configure this scenario in costing.
Thanks
Sateesh

I hear you describing a process that SAP calls External Processing.
We used it in one plant years ago. the operations list in the Routing included steps for work in internal workcenters and one step was done in a work center that represented an outside process.
The operation had control key PP02 Routing/Ref. op. set - external process
For that operation - the details have a section titled: External processing.
This included fields for :
Purchasing info rec.      Purch. organization    0610
Material group
Purchasing group
Vendor               120945
Plnd delivery time   10 Days
Price unit           1                 Cost Element         513051
Net price            0.48 ;
I don't remember all the details of setting it up, it did cost correctly though
Issue - the PO were not always correctly recieved, make final settlement of the production order an issue and we were not able to CLSD the order because of open PO on the Production order.
Issue - the material was not trackable (could be the way we did it, may be something to do about it) but when the External operation was reached, the Production stopped, the material went out and waited for the return. The material at the vendor was part of WIP not a stock item in a separate location.
Because of these two issues, we discontinued the practice and changed to standard subcontract (Spec Prc KEy 30) with a separate material number for the material that went to the vendor and a different number for the material on the purchase order that was returned.
hope this is of help

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to configure ACS 5.2 for policy condition on TACACS+ Service

In https://supportforums.cisco.com/message/3953175#3953175 thread, I was able to get the ACS 5.2 work with SRX for both SSH CLI and J-Web TACACS+ accounts. However, I found the behavior is different on our production environment. I found our ACS 5.2 was configured authorization rule with condition "TACACS+ Service" = "junos-exec". I don't know how to configure this on my ACS 5.2 Please guide me how to configure this.
I found there was NO TACACS+ "Authorization Request" when access via J-Web in our production SRX and ACS. However, there were TACACS+ "Authorzation Request" when access via J-Web in our production SRX and ACS. The difference between my lab ACS and production ACS is the authorization rule condition. In my condition, I configure with all "SRX" Device Type. but in our production ACS 5.2, it was configure to TACACS+ Service=junos-exec. so I like to test it in our lab to find out the difference. Thanks.

I would suggest you to go through the below two link.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/migration/guide/Migration_Configure.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/common_scenarios.html

How to configure Solaris 10 IPMP for Oracle VDI 3.3.2

Hi,
Does anyone have an indication on how to configure Solaris 10 IPMP in a manner that supports Oracle VDI?
We have setup two servers with 2 test addresses on physical and 1 logical for the hostname of the box, but when we configure VDI the VDI database does not come up on the 2nd box. We have also tried configuring IPMP without test addresses, but it doesn't make any difference - the DB still doesn't go into the up state after configuration on the 2nd server.
Solaris 10 u9 with patches
Two physical NICs on management VLAN via 2 switches
Two physical NIcs on VDI VLAN via 2 switches
VDI 3.3.2
All hostnames are in DNS and resolve for short name, FQDN and also reverse IP lookup
The is a proposal pdf on Oracle website that mentions IPMP, so someone has done it. Just could do with a hint on how it was done so that it works.
( http://www.oracle.com/us/technologies/virtualization/vdi-design-proposal-1401195.pdf )
Thanks
Paul

OK, updating this with what was causing the issue.
Not an IPMP problem this was a DNS problem. The VDI servers have access to two DNS environments, so had a DNS search path that had the domain where the VMs where going to go and another for management of the box with two DNS servers listed in /etc/resolv.conf.
We configured VDI using the FQDN for the management DNS, however the vda-config script takes the hostname of the box adds the first DNS domain from /etc/resolv.conf search entry and configures using (it seams to ignore what you put into the vda-config). When the config script comes to configuring MySQL because the names didn't match (FQDN it created by adding hostname to the 1st entry in DNS search path & FQDN that you put into vda-config command), it decides that it is configuring a "Client MySQL" instance rather than a "Slave MySQL" instance, which means the VDA DB never comes up in the out of vda-center status.
So the fix is to:
1) configure IPMP without test addresses (so traffic comes out of the correct IP and can be reverse looked up in DNS by the other host)
2) if you have multiple DNS search entries, configure VDI using the first entry in your search path as its FQDN
Paul

JMS - How to configure incremental redelivery intervals for an MDB

Hi all,
I noticed that when message delivery in an MDB fails, the time to the next delivery attempt for the message increases with every failed delivery. The intervals are 5, 10, 20, 40 and 60 seconds. After this the interval stays at 60 seconds.
Now I was trying to find out how to change this behavior, but did not find the appropriate configuration elements in the console or the documentation. What I found are the options to configure "Default Redelivery Delay" in the ConnectionFactory which is set to 0 and in the Queue "Redelivery Delay Override" which is set to -1.
Both of these settings do not explain the incremental delay. Can anyone tell me how to configure this? Is that part of the MDB deployment descriptors?
Thanks,
Chris

Hi Tom,
thanks again for your answer :-) I am sorry, i forgot to mention in my initial post, that i had a look at those parameters. But according to the documentation the default values for both are 60 seconds. In my MDB i did not set any of those, so it should not start at 5 seconds like it does but at 60 seconds. Additionally this suspension, I if understood correctly, should only kick in if the JMS resource (I figure this is the queue in this case) is unavailable, which is not the case in my scenario. And as a third the suspension described there is not growing exponentially as I experienced.
Sorry if I am just thick here, but the documentation just does not look like what I am looking for. Are there any misunderstandings on my side?
Thanks, Chris

How to configure HR Process Workbench for Payroll?

Similar Messages

Maybe you are looking for