How to configure OSB Tracing level from Customization File?

Hi,
I want to configure the OSB Tracing level from the customization file rather than from the console.
I check the oracle documentation for OSB tracing and could not find anything related to OSB tracing property that we could configure from OSB workshop.
Is it possible to do so ?
Any pointers will be highly helpful.
Thanks,
Anugoonj
Edited by: Anugoonj Ranjan on Jan 20, 2011 1:27 PM

Customization file is for replacing environment values that differ between domains and NOT for changing Operational Settings. You may use "Configuration" section of OSB Dashboard to effectively change Operations Settings for resources instaed of doing it one-by-one on console -
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/configuration.htm#CACGEFAE
Regards,
Anuj
Edited by: Anuj Dwivedi on Jan 20, 2011 6:10 PM

Similar Messages

How to configure evaluations at level task only for released projects?

Hi,
Does anyone know how to configure evaluations at level task only for released projects?
What we need is that the evaluation will be executed only when project has released status. Is that possible?
Thanks a lot,
CAMILO URIBE

Hi CAMILO,
After the notes 1422722 & 1465106 is a service method available, which allow the customer to dis-able the evaluation.
CL_EVE_EXTRACT_FACTORY SET_ACTIVE
You can put a codes in some BADI method, which is called during save. Within the Badi-Implementation, call the SET_ACTIVE method, so that the evaluation not be tiggered (until the project get released.)
KInd regards,
Zhenbo

How to configure a scenario which posts same file to different directories

How to configure a scenario which posts same file to different directories of a receiving system?
Consider an Idoc to file scenario where I have to post same file to two different directories but logical receiver system has to be same.

Hi,
You can try out like this: Using multiple receiver interfaces you can send it to multiple directories with the help of enhanced interface determination/conditions and with the help of multiple receiver communication channels.
Another option is to copy the file from one target directory into another directory with the help of Unix script by executing the same from the OS command level.
One more option is to create a Java Server Proxy and inside the proxy, you can write java code to FTP into different locations.
Hope this helps,
Regards,
Moorthy

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

How can I remove one page from adobe file

How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?

Tools>Pages>Delete pages

How do I restore iTunes library from Backup files on External Hard Drive?

How do I restore iTunes library from Backup files on External Hard Drive and keep the new iTunes library on the External Hard Drive. I have all the media and playlist and .xml .itl files, just want the iTunes to recognise the content.
I backedup my iTunes content by dragging to External Hard Drive. Formatted and reinstalled OS. My iTunes content is so large, that I wish for the Library and content to remain on the External Hard Drive. I have all the music files and playlists, I just cannot get the iTunes application to display all the content. Hoping to Not have to drag and drop all the content to be recopied into new iTunes organised files.
Troubleshooting this by researching other conversations on the web, I have come stuck for a solution. One Troubleshoot told me to hold down the Command key and then lauch iTunes and a dialogue box will appear to Choose a new library, however when I try this, no Dialogue box appear to give me the option!?

It sometimes has that funny switch symbol on it too.
tt2

How to upload the invocie verify from excel file?

How to upload the invocie verify from excel file?
there is more items requied to input.
refer to MIR7
thanks

How to upload the invocie verify from excel file?
there is more items requied to input.
refer to MIR7
thanks

How to clean the trash forever from locked files?

How to clean the trash forever from locked files?

Depends on what the problem is, but holding down the option key while emptying the trash will bypass the locked status and delete the files.
If those files are still in use (or the Finder thinks so), they cannot be deleted in the normal way. If the option key trick doesn't work, we can use the terminal.

HOW DO I PUT A SONG FROM A FILE ONTO MY ITUNES LIBRARY?

how do i put a song from a file onto my itunes library? i had downloaded a song off a website at hal lenards website. and now its on my computer in a file but i don't kno how to get the song onto my library on itunes.

File -> Add to library.

Creating BOM using BDC :How to display no of records from flat file under

Hi,
 How to display no of records from flat file under one (Alternative BOM) vertically.
 When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
 no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
 matnr(18),
 werks(4),
 stlan(1),
 END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
 idnrk(18),
 MENGE(18),
 MEINS(3),
 postp(1),
 END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
 matnr(18),
 werks(4),
 stlan(1),
 idnrk(18),
 MENGE(18),
 MEINS(3),
 postp(1),
 posnr(4),
 END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
 DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
 'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'RC29N-MATNR'
 'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
 'WIND'.
perform bdc_field using 'RC29N-STLAN'
 '1'.
perform bdc_field using 'RC29N-DATUV'
 '16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'RC29K-BMENG'
 '1'.
perform bdc_field using 'RC29K-STLST'
 '1'.
perform bdc_field using 'BDC_CURSOR'
 'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
 'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
 'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=FCBU'.
perform bdc_field using 'RC29P-IDNRK(01)'
 BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(01)'
 BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(01)'
 BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(01)'
 BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'BDC_CURSOR'
 'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
 BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
 BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
 BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
 BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'BDC_CURSOR'
 'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
 'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
 Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
 Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
 CLEAR iBDCDATA.
 iBDCDATA-FNAM = FNAM.
 iBDCDATA-FVAL = FVAL.
 APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA.

How to configure sync rules involving a CSV file and portal self service

Hello,
I need to configure some FIM sync rules for the following scenario:
User account details are entered from a HR CSV file and exported to AD Users have the ability to modify their own AD attributes in the
FIM portal (there is not a requirement for them to view their HR CSV data in the portal). The FIM portal modifications will be exported to AD as expected.
My setup is as follows:
CSV file - name, last name, employee ID, address.
CSV MA - has direct attribute flows configured in the MA between the data source and MV Portal self service attributes –
users can edit mobile, display name and photo
I've also set the CSV MA as precedent for the attributes
FIM MA – attribute flows defined for MV to Data Source as usual (i.e. firstname to firstname, accountname to accountname, etc).
AD MA – no attribute flows defined as inbound and outbound sync rules have been configured in the portal using the Set\MPR\Triple.
I’m thinking of using the following run profiles:
CSV MA – full import and delta sync (imports HR data)
FIM MA – export and delta import (imports portal changes)
FIM MA – delta sync (syncs any portal changes)
AD MA – export and delta import
If my understanding is correct this should sync HR data from CSV to AD, as well as user attribute self service updates from the portal to AD.
If I wanted to just do a HR CSV sync could I get away with just steps 1 & 4 ? (presumably not as my rules are in the FIM portal?)
If I wanted to do just a portal sync, could I get away steps 2-4?
Any advice on how to improve my setup is much appreciated - cheers
IT Support/Everything

The truth is that your design should be done in the way that it doesn't matter which profiles in which order you will execute. At the end, if you will run all import, synch and export profiles on each data source you should get same result. This is beauty
of synch engine here.
Your steps from 1-4 will synch data to your data sources and at the end will give you expected result. But not because of the order you are executing them but because of correct attribute flows. If flows from CSV file and from FIM portal might be done for
the same attributes you need to think also about attribute precedence.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

How to configure the jdeveloper 11 with .dbc files?

hi, all
i am a new bie here. 4 jdeveloper 10, i can configure the .dbc files at project setting, while 4 jdeveloper 11, it's totally different. i can't find any place to configure it. How to configure the .dbc in jdeveloper 11?
Regards,
Chelsea

You cant use jdev 11g for OAF development..
You need to download the jdeveloper patch from metalink to develope OAF objects.
Refer this metalink note to find the correct version of jdeveloper that you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
--Prasanna

How can i get all links from html file ?

I tried some code:
List<string> metas = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
HtmlWeb web = new HtmlWeb();
HtmlAgilityPack.HtmlDocument doc = new HtmlAgilityPack.HtmlDocument();
doc.Load(filename, Encoding.UTF8);
var metaTags = doc.DocumentNode.SelectNodes("//meta");
if (metaTags != null)
foreach (var tag in metaTags)
if (tag.Attributes["name"] != null && tag.Attributes["content"] != null)
text = tag.Attributes["name"].Value;
mys = tag.Attributes["content"].Value;
var linksOnPage = from lnks in doc.DocumentNode.Descendants()
where lnks.Name == "a" &&
lnks.Attributes["href"] != null &&
lnks.InnerText.Trim().Length > 0
select new
Url = lnks.Attributes["href"].Value,
Text = lnks.InnerText
foreach (HtmlNode node in doc.DocumentNode
.SelectNodes("//a/@href | //img/@src"))
metas.Add(node.Name);
In the var linksOnPage i'm getting all the links but some of them not only links for example the first item i see:
[0] = { Url = "/", Text = "    " }
Then the second item:
[1] = { Url = "http://rotter.net/cgi-bin/forum/dcboard.cgi?az=login", Text = "התחבר" }
Next i want to add another loop or variable that will contain only the links after im src for example:
<img
src="http://mysite.com"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">
So to get only http://mysite.com
So in the end i will have two Lists:
First List will contain all links from the html file.
Second List only links that are in img src

Ok i'm using regex now and i can get the links i need:
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
string[] fall = File.ReadAllLines(filename);
foreach (string hh in fall)
if (hh.Contains("http://rotter.net") && hh.Contains("locked")||
hh.Contains("locked_icon_general") ||
hh.Contains("locked_icon_anchor") ||
hh.Contains("icon_anchor") ||
hh.Contains("locked_icon_fire") ||
hh.Contains("locked_icon_sport")||
hh.Contains("locked_icon_camera")||
hh.Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(hh))
metas.Add(m.Value);
So now in the metas i have in this case two links.
For example the first link is from this block in the file:
The link i got is : http://rotter.net/forum/Images/hot_icon_anchor.gif
And this is the right link from this block but now how do i get the text from this block and how i connect how do i know that this text belong to the link ? I need to add this text from this block to a new List. Before all that i counted on my own lines
and got the text but that's a bad idea.
I need somehow to get: שרשור תשדירי בחירות מרוכז:
To get the text between the ToolTip',' and the second ',' but not from all the html file only in places of this two links i extracted.
<TD ALIGN="RIGHT"
VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','שרשור תשדירי בחירות מרוכז:','כתב: menahem בתאריך: 03.03.15
שעה: 08:51 1. http://youtu.be/utUaqyiRkJ8 ...'); Activate();"
onmouseout="deActivate()"
href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/hot_icon_anchor.gif"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=187966&forum=scoops1">
שרשור תשדירי בחירות מרוכז:
</a></TD>

How can I use a photo from my files as a screen saver?

I have an LG monitor about 10" high and 16" wide. How can I send a photo from my Adobe files to my desktop as a screen saver. Because of the odd dimensions of this monitor, the one I have as a screensaver now does not show the entire photo. I need instructions how to choose one of my photos, send it to the monitor as a screen saver, and make it the correct size to show the entire photo.

You'll need to download the song from your cd to your my music folder, then open Itunes files add files or folder to the library then you find your song from your my music folder. Then you will have to create the ringtone:
http://http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html
follow the instruction to create then sync the ringtones.

How to configure OSB Tracing level from Customization File?

Similar Messages

Maybe you are looking for