How to configure P6Spy Driver with websphere 5.1 version

Hi
I would like to configure User-defined JDBC Provider in Websphere Application Server V5.1 .
I would like to configure P6Spy Driver , and i was trying to use P6ConnectionPoolDataSource .
I also added property "enable2Phase" to true / false etc ,
I had tried with P6DriverManagerDataSource class and P6XADataSource class too ,
but still i was getting the following error
[11/3/05 9:40:20:156 IST] 71ca013e ConnectionMan E J2CA0020E: The Connection Pool Manager could not allocate a Managed Connection: javax.resource.spi.ResourceAllocationException: DSRA8101E: DataSource class cannot be used as one-phase: ClassCastException: com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
     at com.ibm.ejs.j2c.poolmanager.FreePool.createManagedConnectionWithMCWrapper(FreePool.java:1321)
     at com.ibm.ejs.j2c.poolmanager.FreePool.createOrWaitForConnection(FreePool.java:1064)
     at com.ibm.ejs.j2c.poolmanager.PoolManager.reserve(PoolManager.java:1571)
     at com.ibm.ejs.j2c.ConnectionManager.allocateMCWrapper(ConnectionManager.java:622)
     at com.ibm.ejs.j2c.ConnectionManager.allocateConnection(ConnectionManager.java:424)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource.getConnection(WSJdbcDataSource.java:216)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource.getConnection(WSJdbcDataSource.java:191)
Expecting a reply
Thanks in Advance
Best Regards
Rajesh Kartha

Rajesh,
I am seeing this problem also, did you find a solution?
Thanks. Peter

Similar Messages

Qosmio F60-L10 - How to configure tv tuner with integrated antenna?

good evening,
i have a notebook toshiba qosmio f60 ,i had read your answer about tv tuner.
my question is : how to configure tv tuner with integrated antenna? thanks

Hi 3171954,
I think Paolo30 is right. Qosmio F60 is equipped with internal DVB-T but in some cases you need an external antenna to pick up the low signal. In most cases only in large citys you dont need an external antenna. If you live on the fringe of the city, normally a cable is needed.
Anyway, do you mean an external antenna or external DVB-T receiver (USB stick)?
Normally Windows media center should recognize the internal DVB-T tuner. Is it listed in device manager? Did you update the driver?

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

How to configure bt mail with icloud?

how to configure bt mail with icloud?

iCloud does not handle any mail systems except for its own. BT is not an iCloud mail system, so you can't.

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

How to install scan driver with canon ir2025

how to install scan driver with ir2025

Thats simply
Access the Toshiba European driver page and download the Toshiba graphic driver designed for you notebook series.
Then start the device manager and uninstall the present graphic driver.
Then reboot the notebook and then install the downloaded graphic driver on your system
Thats all ;)

How to configure listener and tnsnames.ora on 10g version

how to configure listener and tnsnames.ora on 10g version

If you are on linux platform, on command prompt execute netmgr and configure listener fromt there. Or go to $oracle_home/network/admin/listner.ora write the following
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
For tnsnames.ora write the following
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)

How to integrate RFSG driver with sampling theorem labview code

hi all,
I got the labview code of sampling theorem from labview-> find examples. How can I integrate this code with PXI system? How can I integrate the RFSG driver with labview code?

Hi Nieman,
LabVIEW 2014 should be compatible with the 9068 and the cRIO 2.1 drivers. I verified it should work as expected earlier today. Please make sure you are using the example cRIO PN-IO Device when you are moving the module over to the new target. If you are already accessing that, please navigate to this folder:
<Program Files>\National Instruments\LabVIEW 2014\Targets\NI\FPGA\cRIO\other
Please let me know if you see a CS_cRIO-PNAD folder. This folder provides all the files necessary to discover and use the module in the project. If we do not have that folder there, we will be unable to locate the module. If that is indeed the case, then it may be the driver did not install correctly.
If after finding this folder and it is still not working, please send me screenshots of the error that you are seeing and a MAX Technical Report. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How to format Windows drive with Mac OS format

Hello
I have a Windows 160gb internal drive that is formated in Fat32. I am unable to format this drive with Mac OS X 10.3.9 in order to install Tiger 10.4. When I attempt to format using the Mac OS extended (journaled), I receive an error (sorry I didn't write it down) partition error. If I use the Mac OS extended option I recieve an error that the drive can not be unmounted.
How can I format this 160gb drive with Mac OS format so that I may install Mac OS X 10.4
Thank you

Do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

How to configure UDDI Server with in EDK with a 4.5WS?

I'm trying to develop a crawler service using EDK5.0.1 with a 4.5ws portal.
To do this job, I have to deploy and coufigure a UDDI Server which is a requirement for services in 4.5ws.
After develping and deploying a crawler service, I created gadget server in the 4.5ws portal, and tried to add remote data source, but the popup window for datasource seems not to be able to find the crawler service and showed 'Empty Gadget Server'.
I think I set up the uddi server with a wrong way, but I don't know what I have to do more to set a uddi server.
Actually, after developing crawler service and sci service, I deployed these with DeployServlet which is a deploy toolkit offered by EDK.
With this deploying result, I modified the uddi.xml file and put that file into c:\program files\Plumtree\ptedk\5.0\devkit\config\java\uddi folder.
Is there any things to set for uddi server?
Can anybody provide me any advise on this?
Any help would be appricated.

The UDDI is used with web services in 4.5x. This is best described as a phone book of URLS for any web services installed in that machine. Those URLS will then point to the individual web services.
In 5.0 the UDDI server is not needed since it is replaced with the "Remote Server" and "Web Services" tabs. HOw to setup a UDDI with TOMCAT
UDDI can be setup to run with TOMCAT and I believe this is the only one provided in the EDK installer in the ptedk\5.0\devkit\java directory
Here's a little TOMCAT information. Web applications are deployed in a folder called "webapp". This case, we have a uddi server installed and it's in a folder called "uddi". So, our file structure for the UDDI server looks like: /webapp - tomcats web application folder /uddi - the uddi application /WEB-INF - standard WEB-INF directory stores java classes, jars and any descriptor files. server-config.wsdd - this is the web service descriptor file for this uddi server - provided by plumtree web.xml - this is the web.xml descriptor file for how the web services in this application will be loaded and run - provided by plumtree /lib - contains the jar files for the uddi server - provided by plumtree The server-config.wsdd file should be the only item that the user needs to modify. Within the file (XML based), there should be the following tag:  <service name="MessageService" provider="java:MSG" style="message"> <parameter name="allowedMethods" value="find_tModel find_business find_binding"/> <parameter name="className" value="com.plumtree.remote.uddi.UDDIServer"/>  <parameter name="baseUrl" value="http://rickc-loaner:81/ntcws/"/>  <parameter name="isDotNet" value="true"/>   <parameter name="crawlerName" value="NT File CWS"/>  <parameter name="authName" value=""/>  <parameter name="documentProviderRpc" value="DocumentProviderSoapPort"/>  <parameter name="containerProviderRpc" value="ContainerProviderSoapPort"/>   <parameter name="sciDataSourceRpc" value="SciSoapPort"/>  <parameter name="sciCrawlRpc" value="SciSoapPort"/>  <parameter name="sciCardRpc" value=""/>   <parameter name="authProvider" value=""/>  <parameter name="syncProvider" value=""/>  <parameter name="authSci" value=""/>  <parameter name="documentProviderDoclit" value="documentprovidersoapbinding.asmx"/>  <parameter name="containerProviderDoclit" value="containerprovidersoapbinding.asmx"/>   <parameter name="sciDataSourceDoclit" value="xuiservice.asmx"/>  <parameter name="sciCrawlDoclit" value="xuiservice.asmx"/>  <parameter name="sciCardDoclit" value="xuiservice.asmx"/> </service> This tag contains the information that will be specific to the user's deployment of the web service (CWS or AWS).First off: <parameter name="baseUrl" value="http://machinename:81/ntcws/"/>
This is the location of the web server that has the target web service installed. THIS CANNOT BE "localhost". This has to be a resolvable machine name or IP address. In 5.0 this is the Remote Web Service settings. Second, you need to set the type of web service.  <parameter name="isDotNet" value="true"/> If your app server hosting the web service is dotnet, you need to set this to "true". This is equivalent to the Document encoding setting in 5.0. .NET supports Document/Literal incoding instead of RPC for Java. Third, name your web services. This is the name that will display in the drop down list in 4.5WS when you decide to create a remote data source.  <parameter name="crawlerName" value="NT File CWS"/>  <parameter name="authName" value=""/> This is the web service name property when you create a new web service in 5.0. Next are the configuration settings for your particular web service:  <parameter name="documentProviderRpc" value="DocumentProviderSoapPort"/>  <parameter name="containerProviderRpc" value="ContainerProviderSoapPort"/>   <parameter name="sciDataSourceRpc" value="SciSoapPort"/>  <parameter name="sciCrawlRpc" value="SciSoapPort"/>  <parameter name="sciCardRpc" value=""/>   <parameter name="authProvider" value=""/>  <parameter name="syncProvider" value=""/>  <parameter name="authSci" value=""/>  <parameter name="documentProviderDoclit" value="documentprovidersoapbinding.asmx"/>  <parameter name="containerProviderDoclit" value="containerprovidersoapbinding.asmx"/>   <parameter name="sciDataSourceDoclit" value="xuiservice.asmx"/>  <parameter name="sciCrawlDoclit" value="xuiservice.asmx"/>  <parameter name="sciCardDoclit" value="xuiservice.asmx"/> These are equivalent to setting the Document provider URL, Container Provider URL, Remote UI URL etc etc that are in 5.0 web services settings. Once you have installed the UDDI server, and started TOMCAT, you should be able to hit the services list at:http://machinewithuddi:8080/uddi/services This will become your Remote Gadget Server URL and you should be good to go!!

How to config AM agent with websphere app server which binded http server??

Hi, thanks for your concern.
I am configuing AM policy agent with websphere 6.0 application server , the difference to the normal situation is : the IBM application server is binding with IBM http server so the server can deal with request from the port 80. It puzzled me much what shall I do when I installing the agent, the following are the questions:
1. Enter the Instance Config Directory: -- shall i use the config folder for "server1" or "webserver1"?
2. Enter the Server Instance name. -- shall i use the "server1" or "webserver1"?
3. Enter the preferred port number on which the application server provides its services: -- shall i use "80"(web server) or "9080"(app server) ,
4. Enter the preferred port number on which the application server provides its services: -- yes i should fill "/agentapp" here, but when i deploy this application, the web module should be "webserver1" or "server1"?
And yet I only need SSO here , what is the easiest way to configue them well? I do not want to obey the contents from DOC, at fact it makes my websphere crashed ... I think maybe I can use "filter" for application only after I installed the agent, is that right? but it make me crazy that, websphere told me it can not find the class javax.servlet.Filter ... I copied one for it ,but it still can not work. I think maybe I make wrong configuration before .
Is the document "Sun Java SystemAccess Manager PolicyAgent 2.2 Guide for IBM WebSphereApplication Server 6.0" only for stand alone application server?
Any help will be most appriciated! thank you!

If you are trying to install j2ee Agent 2.2 then the below answers may be helpful. i am not sure what webserver1 is ?
Remeber all config for j2ee agent is for the app server.
1. Enter the Instance Config Directory: -- shall i use the config folder for "server1" or "webserver1"? You should be using the 1 which your app server is using. The server.xml will be modified for the corresponding server instance.
2. Enter the Server Instance name. -- shall i use the "server1" or "webserver1"? depends on above config
3. Enter the preferred port number on which the application server provides its services: -- shall i use "80"(web server) or "9080"(app server) , for j2ee agent ot should be 9080
4. Enter the preferred port number on which the application server provides its services: -- yes i should fill "/agentapp" here, but when i deploy this application, the web module should be "webserver1" or "server1"?it should be ur app server port.
And yet I only need SSO here , what is the easiest way to configue them well? try sso_only mode
I do not want to obey the contents from DOC, at fact it makes my websphere crashed ... I think maybe I can use "filter" for application only after I installed the agent, is that right? without the agent filter in the web.xml the agent wont intercept any traffic.
but it make me crazy that, websphere told me it can not find the class javax.servlet.Filter ... I copied one for it ,but it still can not work. I think maybe I make wrong configuration before .
Is the document "Sun Java SystemAccess Manager PolicyAgent 2.2 Guide for IBM WebSphereApplication Server 6.0" only for stand alone application server?
Follow the SUN Docs strictly and it should work fine.

How to configure Oracle Discoverer with EBS R12 ?

Dear
I hope, by default Oracle Discoverer is not configured with EBS R 12. How to configure it?
Any hlep, highly appreciated.

Ateeq,
Please refer to the following note, it should be helpful:
Note: 373634.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=373634.1

How to configure the SSL with SharePoint Site

my site is running on http.
When we create the new website it will ask about "Use Secure Sockets Layer (SSL): "
i have select the no and develop a site.
now i want to move it on httpshowever i want to configure this site with SSL certificate.. how can i move it to https?
any one help me how can i acess my site from https:// URL.
i have bought the SSL certificate.
waiting.........
its urgent.

I am also having an issue with adding and SSL cert to an existing site. I am also using a hostname vs the server name for the URL. Here is what I have done so far:
- Local MS DNS Entry (spsite.abccorp.com) point to the IP address of the SP server.
- ensured the port 80 and 443 boxes are filled in in IIS for the "Sharepoint - 80" site.
- Added Certificate to that IIS site, but did not make SSL required (so I could try both http and https without it barking).
- Under the Alternate Access Mapping Section of SP, I changed the URL from http://spsite.abccorp.com to https://spsite.abccorp.com for the "Sharepoint - 80" Collection. I even tried just added the https url to the "Custom" area vs the "Default"
After I have done all this, I get "Page Can Not Be Displayed" when going to the HTTPS site but works fine for the HTTP.
Any suggestions?

How to configure P6Spy Driver with websphere 5.1 version

Similar Messages

Maybe you are looking for