How to configure SSL in standalone weblogic server for ADF apps

Hello,
I'm new to weblogic, Could anyone provide documentation/blog references to configuring SSL in weblogic for adf application. Currently adf application deploys on http I need it to deploy as https.
Appreciate your response
Thanks and Regards

Expand Environment > Click on Server > Click on Keystores Tab
Under Keystores you have some options like DemoIdentity & Demo Trust.
If u want to use the default keystores, you dont have to modify these configuations.
Just enable SSL and specify the listen port.
Expand Environment > Click on Server > General
SSL Listen Port Enabled
SSL Listen Port:
If u want to use your own keystore Select Custom Identity and Custom Trust besides Keystores Drop Down and specify the require values.
If u need any clarification let me knw.
HTH,
Faisal
http://download-llnw.oracle.com/docs/cd/E11035_01/wls100/secmanage/ssl.html

Similar Messages

How to configure WebCenter runtime on WebLogic server

Hi,
I have exposed my existing ADF 11g application as a portlet based on the inputs that I got from Re: Exposing Existing ADF application as a portlet in WebCenter . I'm able to deploy this and run this in the embedded WebLogic server that comes with JDev. But I'm getting an error when I try to deploy it on an standalone WebLogic Server? Do I need to anytshing specific to configure WebCenter run time? Currently, I just have ADF run time configured on the server. Please let me know.
Regards,
Antony.

You have to install webcenter. It's a rather large installation.
You can find the download here:
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
The one you are looking for is:
WebCenter Suite (11.1.1.2.0)
And if you are running WLS 10.3.3 you also need to install
WebCenter Suite (11.1.1.3.0) (after installing the 11.1.1.2.0)
And don't forget to first run the RCU which you also need to download if you haven't already done so
Repository Creation Utility (11.1.1.3.3) (if you are using WLS 10.3.3 with Webcenter 11.1.1.3)
or Repository Creation Utility (11.1.1.2.1) (if you are using WLS 10.3.2 with webcenter 11.1.1.2)
If the installation askes to install UCM, don't check this on because otherwhise you also need to download UCM:
Content Management for WebCenter (10.1.3.5.1)
After the installation is done, you can run the configuration tool from the WLS to create a new domain and then you can select the webcenter components you want to install in the domain.

How to configure SOA in Integrated WLS Server for JDEV 11.1.1.1.0

Hi,
I am trying to deploy a SOA Application but it says No SOA Configured targets found. How can I configure SOA on Integrated Weblogic Server in JDeveloper.
Thanks

Okay, so the Admin server controls the connection. Is there a screen that shows this? My JDev is reporting that the soa server does not exist, though the WebLogic administrator shows that it's there.
I have checked the AdminServer.log and the soa_server1.log files and found nothing that would indicate an error. I also noticed there is something called a Work Manager. wm/SOAWorkManager This guy is pointing to just the soa server.

10.3, how to configure cluster as "single Weblogic server"

Hello,
We have a Cluster with Two Managed servers. The ports for the MS's are 7002, 7003. We want deployments for these servers to be visible through port 80/443. Currently we have Mapviewer application deployed and targeted to the cluster. All servers are RUNNING and the deployment is active. However we are only able to access the deployment on ports 7002, 7003.
The documentation states: "A WebLogic Server cluster consists of multiple WebLogic Server server instances running simultaneously and working together to provide increased scalability and reliability. A cluster appears to clients to be a single WebLogic Server instance."
But nowhere does it state how to get a cluster to appear as a "single Weblogic server instance". Where does this happen in the admin console or config files? Perhaps its a node manager function? Please help. Thank you.

Thank you. I was beginning to think it was something external to Weblogic. I saw alot in the docs about Load Balancing within Weblogic but didn't read much into it. I'm assuming its more at the application level? Anyhow..
Reading the description of the FrontEndHttpPort config option for Clusters made me think it was the solution:
"Sets the FrontendHTTPPort for the default webserver (not virtual hosts) for all the servers in the cluster. Provides a method to ensure that the webapp will always have the correct PORT information, even when the request is coming through a firewall or a proxy. If this parameter is configured, the HOST header will be ignored and the information in this parameter will be used in its place, when constructing the absolute urls for redirects."
I would set FrontendHTTPPort to 80, restart everything and get strange results. If I typed in http://localhost:7003/mapviewer it will redirect browser to http://localhost/mapviewer/faces/home.jspx and give a 404 type error. Using this new URL if I inserted the :7003 port again and hit go, the page would come up...but submitting a form or link on the page it would redirect back to port 80 and a 404 error. edit: this is probably working as intended.
So is there a popular solution or plugin for this issue?
Edited by: jstretch on Jan 21, 2009 2:06 PM

How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

Dear Experts,
I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.
The registered domain name is e.g. contoso.com.
a. What should I use as domain name on AD? contoso.com or contoso.local
b. Is it recommended to have two different servers for AD and Exchange?
c. What should be my connector settings for mail flow?
d. how can I set 2 email servers in company for load balancing?

Hi,
a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
b, Recommended that installing AD
and Exchange Server on two separate
Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
c, Found some articles for your reference:
Configure Mail Flow and Client Access
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
Configuring Outbound Mail Flow in Exchange Server 2013
http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
d, Load Balancing
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

How can i create datasource on apache server for ADF application?

Hi All,
i my use case i have created simple adf application using ADF BC and want to deploy on Apache server 6.x.
So my question is that how can i create Data Source i have goggling and find two different way to do this.
1. write following line of code on apache server conf/Context.xml file.
<Resource name="jdbc/TestDB" auth="Container"
              type="javax.sql.DataSource"
               driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@localhost:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"/>
but when i have used this way i got following exception.
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection
check link-
https://forums.oracle.com/thread/2564233
2. write following line of code apache conf/Server.xml file
<GlobalNamingResources>
    
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/TestDB" auth="Container"
              type="oracle.jdbc.pool.OracleDataSource"
              description="User database that can be updated and saved"
              driverClassName="oracle.jdbc.driver.OracleDriver"
              factory="oracle.jdbc.pool.OracleDataSourceFactory"
              url="jdbc:oracle:thin:@//172.31.43.207:1521:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"   />
</GlobalNamingResources>
and add this line in context.xml file inside <context> tag
<ResourceLink global="jdbc/TestDB" name="jdbc/TestDB" type="oracle.jdbc.pool.OracleDataSource"/>
but when i have run application i have got following error
log-
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
Aug 2, 2013 5:17:21 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
so what is the solution how to create datasource on apche server which suitable for adf application?
when i test data source using following code used 1. way as i mentioned above its running fine bt not for second.
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:query var="rs" dataSource="jdbc/TestDB">
select empname from pay_emphdr where empcd='JK1306'
</sql:query>
<html>
<head>
    <title>DB Test</title>
</head>
<body>
<h2>Results</h2>
<c:forEach var="row" items="${rs.rows}">
    Foo ${row.empname}<br/>
</c:forEach>
</body>
</html>
please help me. it is very urgent.
thanks in Advance
Manish

Hi Lindalnci
i have already tried this tutorial and in my post i have defined first way to do using this procedure.
in that case i have got following exception as i have mentioned above
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection

How to configure SSL certificates on weblogic 10.3.5?

Hi everybody,
i' ve got 2 certificates: Server and Intermediate CA. I used java keytool command to import these two certificates into new keystore:
keytool -import -v -alias server_cert -file certificate.pem -keystore keystore.jks
keytool -import -v -alias intermediate_ca -file intermediate.pem -keystore keystore.jks
Then as weblogic 10.3.5 documentation says i need to use ImportPrivateKey utility in order to import private key into keystore, so i use this command:
java utils.ImportPrivateKey -keystore private.jks -storepass password -keyfile mykey -keyfilepass password -keyfile private.pem -alias private
and get the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: utils.ImportPrivateKey
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Caused by: java.lang.ClassNotFoundException: utils.ImportPrivateKey not found in gnu.gcj.runtime.SystemClassLoader{urls=[file:./], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Any ideas? Thanks.
Regards,
Karolis M.

Hello,
Weblogic has two keystores : identity (if you are doing 2 ways SSL) and trust. you should import your "external" certificate in the "trust" key store.
look at your server config to know your config : Home >Summary of Servers >AdminServer-->configuration-->keystore
I suggest that you change the default configuration (not using the demo one),
then when you know where is yo key store use the command line to add your certificate to trusted store (this is a example) :
opt/weblogic10_3_3/jdk160_18/jre/bin/keytool -import -noprompt -trustcacerts -alias BLCCertificateAuthority -file cacert2035.pem -keystore /opt/weblogic10_3_3/jdk160_18/jre/lib/security/cacerts
once your certificated is added to your trust store it should work.
I hope it will help.

How to configure SSL for Oracle Weblogic Server

Hi,
Please help me to configure SSL in oracle weblogic server.
If possible, please provide step by step to configure SSL.

this should help
http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

Configuring Weblogic Server for X.509 Smart Card Authentication

0 down vote favorite
share [g+] share [fb] share [tw]
I am running Oracle Weblogic 11g (10.3.6) and attempting to configure two-way SSL (client certificate requested and enforced). The client certificate is on a smart card.
I have enabled "basic" ssl in the weblogic server, and used keytool to import the relevant root CA certificates into the DemoTruststore.jks file. I have set the Two-way client cert behavior to Client Certs Requested and Enforced for the server.
Unfortunately, attempting to access my application causes the following:
<pre>
<Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
<NO_CERTIFICATE alert was received from 127.0.0.1 - 127.0.0.1. Verify the SSL configuration has a proper SSL certificate chain and private key specified.>
<Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
</pre>
The ActivClient dialog never appears to select a certificate from the Smart Card, and a pin is never requested. Therefore, I think I misconfigured something.
Help would be greatly appreciated.
Jason

Hello Mukunthan Damodharan,
this means that the SSL Server Certificate has not his fully quallified name in the subject alternative name extension of the X.509 certificate.
You can create a valid one or disbale that check in the Secure Login Client.
How does the configuration gets to the clients?
With the Policy Download you can disable that check over the Secure Login Server Administration console in the corresponding authentication profile.
If manually you can change the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\SAP\SecureLogin\profiles\<profile name>
"sslHostAlternativeNameCheck"=dword:00000000
the value 0 disable that check on the client.
best regards
Alexander Gimbel

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How to configure User domain in Weblogic..........

How to configure User domain in Weblogic Application Server 8.1 from Command prompt on windows Xp?
Thanks in Advance.

<p>
You can use WLST or weblogic.Admin command. WLST is the recommended appraoch. Here are a few links for both of the above:
</p>
<p>
http://edocs.bea.com/wls/docs81/admin_ref/cli.html
http://e-docs.bea.com/wls/docs91/config_scripting/using_WLST.html
http://edocs.bea.com/wls/docs90/config_scripting/domains.html
http://dev2dev.bea.com/blog/hoos/archive/2005/09/what_no_wlst_1.html
http://dev2dev.bea.com/pub/a/2005/01/wlst_offline.html
http://dev2dev.bea.com/blog/hoos/archive/2005/10/environment_pro_1.html
</p>
<p>
Hussein Badakhchani
London Middleware
</p>
Edited by hoos at 01/07/2007 3:50 AM
Edited by hoos at 01/07/2007 3:51 AM

Configuring JSP's in Weblogic server 7.0

Hi,
I'm trying to port my web application from weblogic server 6.1 to weblogic
7.0. I'm having a little problem with jsp pages in weblogic 7.0. Some of the text
box controls which are populated dynamically in my jsp pages are getting populated
with
"null" value in WL 7.0 e.g. in the following case
<%
String claim_id=null;
%>
<input type=text value=<%= claim_id %> >
on weblogic 6.1 an empty string is printed but in wl 7.0 null is printed as the
value for the text field.
I used the domain configuration wizard in wl 7.0 to make a WLS Domain and then
deployed my application. If I deploy the same application in one of the examples
domain which is installed with Weblogic 7.0 then everything works fine. So its
definity a configuration issue.
Could someone please help me with this.
Thanks,
-Taqdees.

As per the j2ee 1.2, jsp 1.2 specification mandates that the expressions
default must be "null".
We have introduced a new flag in weblogic.xml called printNulls which is
true by default meaning that "null" will be the default.
Setting this to false makes sure that expressions(<%=expr%> ) with "null"
results are printed as "" (earlier behavior)
Here is how to configure the printNulls from weblogic.xml :
<weblogic-web-app>
<jsp-param>
<param-name>printNulls</param-name>
<param-value>false</param-value>
</jsp-param>
</weblogic-web-app>
Regards,
Eric
"taqdees malik" <[email protected]> wrote in message
news:3daaff99$[email protected]..
>
Hi,
I'm trying to port my web application from weblogic server 6.1 toweblogic
7.0. I'm having a little problem with jsp pages in weblogic 7.0. Some ofthe text
box controls which are populated dynamically in my jsp pages are gettingpopulated
with
"null" value in WL 7.0 e.g. in the following case
<%
String claim_id=null;
%>
<input type=text value=<%= claim_id %> >
on weblogic 6.1 an empty string is printed but in wl 7.0 null is printedas the
value for the text field.
I used the domain configuration wizard in wl 7.0 to make a WLS Domain andthen
deployed my application. If I deploy the same application in one of theexamples
domain which is installed with Weblogic 7.0 then everything works fine. Soits
definity a configuration issue.
Could someone please help me with this.
Thanks,
-Taqdees.

ADF Application Runtime issue in StandAlone Weblogic Server

Hi All,
I tried deploying my ADF Mobile Browser Application in a StandAlone Weblogic Server. The application was targeted to Admin Server and everything worked fine.
But when Targeted to Managed Server the login page alone was rendered (without CSS). Tried loging in with correct as well as wrong passwords but there was no response from the page. (Login button acted like a dummy one)
Even the managed server log had no error messages.
DataSource where configured correctly and targeted both to Admin n Managed Server.
I tried deploying the same in Client's Testing Environment and the same problem occured even in Admin Server.
I couldnt figure out wats the issue.
PS:
Weblogic Server Version : 10.3.6
ADF Runtime:11.1.1.6
JDeveloper Version : 11.1.2.1
The App Contains ADF Authentication Security. Will that cause any issue?
Two Cents
Karthick

Your jdev version and the adf runtime on the wls have to match. Check http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/ for a list of matching versions.
Timo

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

Pagelets not rendering in Fusion ADF application pages deployed on standalone weblogic server

HI All,
I am creating a Pagelet Producer connection, and dragging a pagelet on the page as iframe, with height auto. When I run the application in the integrated weblogic server, I am able to see the pagelet. However when I deploy the application on the standalone weblogic server, then the pagelet isn't rendered.
I am using fusion ADF application 11.1.1.7 and standalone weblogic server v 10.3.6.
Thanks in advance for yours assistance. Please I need a solution for this uregently. DO let me know, if you need any additonal information.
Regards,
Nikhil Mahto

Sorry for the wrong infromation. The correct scenario is:
I have an ADF application, in which I have a Pagelet producer connection, pages and taskflows. This ADF application is inlcuded in a Webcenter Portal Framework application, as a shared library. When the WCF application is deployed on the Weblogic server, the pagelets don't appear on the pages.
I tried the FRAMEBUSTING context parameter to never but it didn't help.
Regards,
Nikhil Mahto

How to configure SSL in standalone weblogic server for ADF apps

Similar Messages

Maybe you are looking for