Configuring Weblogic Server for X.509 Smart Card Authentication
0 down vote favorite
share [g+] share [fb] share [tw]
I am running Oracle Weblogic 11g (10.3.6) and attempting to configure two-way SSL (client certificate requested and enforced). The client certificate is on a smart card.
I have enabled "basic" ssl in the weblogic server, and used keytool to import the relevant root CA certificates into the DemoTruststore.jks file. I have set the Two-way client cert behavior to Client Certs Requested and Enforced for the server.
Unfortunately, attempting to access my application causes the following:
<pre>
<Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
<NO_CERTIFICATE alert was received from 127.0.0.1 - 127.0.0.1. Verify the SSL configuration has a proper SSL certificate chain and private key specified.>
<Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
</pre>
The ActivClient dialog never appears to select a certificate from the Smart Card, and a pin is never requested. Therefore, I think I misconfigured something.
Help would be greatly appreciated.
Jason
Hello Mukunthan Damodharan,
this means that the SSL Server Certificate has not his fully quallified name in the subject alternative name extension of the X.509 certificate.
You can create a valid one or disbale that check in the Secure Login Client.
How does the configuration gets to the clients?
With the Policy Download you can disable that check over the Secure Login Server Administration console in the corresponding authentication profile.
If manually you can change the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\SAP\SecureLogin\profiles\<profile name>
"sslHostAlternativeNameCheck"=dword:00000000
the value 0 disable that check on the client.
best regards
Alexander Gimbel
Similar Messages
-
Problems Starting Weblogic Server for Tutorials (Fresh install)...
Hi guys, need a little help here.
I'm trying to startup Weblogic Server for Java Control Tutorial application and I get all sorts of errors, mostly seeming to deal with JMS/JNDI network stuff. Here's the error dump I get:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
C:\bea\JDK142~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx256m -XX:Com
pileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -Xverify:none -ea -da
:com.bea... -da:javelin... -da:weblogic... -Dplatform.home=C:\bea\WEBLOG~1 -Dwls
.home=C:\bea\WEBLOG~1\server -Dwli.home=C:\bea\WEBLOG~1\integration -Dlog4j.con
figuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml -Dweblogic.managem
ent.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ign
oreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.log
ErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=C:\bea\WEBL
OG~1\server\lib\weblogic.policy weblogic.Server
<Oct 30, 2005 2:33:31 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Java HotSpot(TM) Client VM Version 1.4.2_05-b04 from Sun Micro
systems Inc.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Configuration Management> <BEA-150016> <Th
is server is being started as the administration server.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Integration 8.1 SP4 Tue Nov 30 10:34:16 PST 2004 471877>
<Oct 30, 2005 2:33:32 PM PST> <Notice> <Management> <BEA-140005> <Loading domain
configuration from configuration repository at C:\bea\WEBLOG~1\samples\domains\
workshop\.\config.xml.>
<Oct 30, 2005 2:33:33 PM PST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\weblogic81\samples\domains\workshop\cgServer\cgServer.log is op
ened. All server side log events will be written to this file.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <WebLogicServer> <BEA-000327> <Starting W
ebLogic Admin Server "cgServer" for domain "workshop">
<Oct 30, 2005 2:33:38 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:40 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:42 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:44 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:46 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:47 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgJM
SPool-nonXA" deployment failed with the following error: 0:Could not create pool
connection. The DBMS driver exception was: SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093..
>
<Oct 30, 2005 2:33:48 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:50 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:52 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:54 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:56 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgPo
ol" deployment failed with the following error: 0:Could not create pool connecti
on. The DBMS driver exception was: SQL-server rejected establishment of SQL-conn
ection. Pointbase Server may not be running on localhost at port 9093..>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce" deployment failed with the following error: DataSource(cgDataSource;cgSamp
leDataSource) can't be created with non-existent Pool (connection or multi) (cgP
ool).>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce-nonXA" deployment failed with the following error: DataSource(cgDataSource-
nonXA;weblogic.jdbc.jts.ebusinessPool) can't be created with non-existent Pool (
connection or multi) (cgJMSPool-nonXA).>
<Oct 30, 2005 2:33:57 PM PST> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer
" store failed to open java.io.IOException: JMS JDBC store, connection pool = <c
gJMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JMS> <BEA-040123> <Failed to start JMS Se
rver "cgJMSServer" due to weblogic.jms.common.JMSException: JMS can not open sto
re cgJMSStore.
weblogic.jms.common.JMSException: JMS can not open store cgJMSStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-non
XA>, prefix = <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
>
<Oct 30, 2005 2:33:57 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090170> <Loading the priv
ate key stored under the alias DemoIdentity from the jks keystore file C:\bea\we
blogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate stored under the alias DemoIdentity from the jks keystore file
C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.j
ks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts
.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000331> <Started We
bLogic Admin Server "cgServer" for domain "workshop" running in Development Mode
>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000360> <Server sta
rted in RUNNING mode>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "Li
stenThread.Default" listening on port 7001, ip address *.*>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "SS
LListenThread.Default" listening on port 7002, ip address *.*>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 2 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds until
the condition clears.>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 2 attempts. The MDB will attempt to reconnect every
10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 62 attempts. The MDB will attempt to reconnect ever
y 10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 63 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds unti
l the condition clears.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 122 attempts. The MDB will attempt to reconnect eve
ry 10 seconds. This log message will repeat every 600 seconds until the conditio
n clears.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 123 attempts. The MDB will attempt t
o reconnect every 10 seconds. This log message will repeat every 600 seconds unt
il the condition clears.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
THANK YOU for any help you can provide!These are errors/warning because of incorrect connection pool settings.Either the database parameters were not configured correctly or there were some issues with the configuration itself.
Your server did start up correctly though.
"<Server started in RUNNING mode>" -
How to configure Firefox to use cert from smart card reader on Sun Ray 3 Plus
I have a Sun Ray 3 Plus configured so the user needs a smart card to login (CAC card) and bring up a Java Desktop on the Sun Ray Server (Solaris 10 SPARC).
Now I am trying to get Firefox to read the certificate from the smart card reader but not sure how to go about doing that.
From searching online, it seems like I have to load a module in Firefox:
Edit -> Preferences -> Certificates -> Security Devices
But what file do I load? I'm assuming it is a file that's part of the SUNWut package?I try to test bumblebee with:
optirun glxgears
but I get this error:
Xlib: extension "GLX" missing on display ":8".
Error: couldn't get an RGB, Double-buffered visual -
Setting up weblogic server. for multiple developers.
Hi All,
i am trying to setup/configure weblogic server. we have a situation, we
have about ten developers primarlily working on JSP's and other set working
on EJB's. we want to set the server up in such a way that all the JSP
developers can access off the developement server, and all the EJB
developers will work independently on other server and update the
development server once every evening. how can we achive this, the only way
i could think was to map the drive on to all the developers.
i wanted to know what other approaches are feasible and what is the
development envirments (IDE's )are helpful for remote debugging of EJB's
etc..,
any suggestions or any of your experiences please let me know.
Thank you,
Diwakar.KThis is a typical problem for a revision control system, but anyway:
You could set up a multihomed environment where you have seperate
application dirs for the applications running on the servers.
Diwakar Kamisetti wrote:
>
Hi All,
i am trying to setup/configure weblogic server. we have a situation, we
have about ten developers primarlily working on JSP's and other set working
on EJB's. we want to set the server up in such a way that all the JSP
developers can access off the developement server, and all the EJB
developers will work independently on other server and update the
development server once every evening. how can we achive this, the only way
i could think was to map the drive on to all the developers.
i wanted to know what other approaches are feasible and what is the
development envirments (IDE's )are helpful for remote debugging of EJB's
etc..,
any suggestions or any of your experiences please let me know.
Thank you,
Diwakar.K--
- Santander Direkt Bank AG
- Michael Strauß
- Anwendungsentwicklung Anlagen Fonds
- Gräfstraße 97
- 60487 Frankfurt am Main
- Tel.: +49(0)69 29985-183 -
Weblogic server for Windows 7 64 bit operating system
Hi,
I have installed Personal Oracle 11g on my laptop. Next, I would like to install the weblogic server and then the Fusion middle ware. My goal is to have Oracle Forms, reports and discoverer running on the laptop. I dont see Weblogic server 64 bit for windows in the oracle product matrix. Can anyone suggest where I can get weblogic server for Winfows 7 64 bit machine?
Thanks,
RVHi,
Oracle WebLogic Server Downloads can be found at http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
I believe Oracle WebLogic Server is not certified yet on Windows 7 64-bit, and this explains why you cannot find installation files to download. More details about the product certification can be found at:
Oracle Certification Matrix
http://www.oracle.com/technology/support/metalink/index.html
Regards,
Hussein -
Smart card authentication for IOS device
I am just wondering if anyone was able to successfully implement smart card authentication for vty and console session. if anyone did, can you please point me to the documentation and the implementation guide? thanks
Actually, with the rsa key pair setup in ISO 15+, you can use a smart card to authenticate to cisco switches. I'm still working out all the details but you would need SecureCRT or Putty-CAC. SecureCRT allows you to export the public key from a pki cert and then import that into the switch/router. The disadvantage is you can only use the first cert in the list. Putty-CAC allows you to select which PKI cert you want to use but I haven't verified you can export the public key from a cert. If you contact me, I'll email you the info need to use use SecureCRT.
-
How to configure SMTP server for osb 10.3.1
Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something. -
ISE 802.1x EAP-TLS machine and smart card authentication
I suspect I know the answer to this, but thought that I would throw it out there anway...
With Cisco ISE 1.2 is it possible to enable 802.1x machine AND user smart card authentication simultaneously for wired/wireless clients (specifically Windows 7/8, but Linux or OSX would also be good). I can find plenty of information regarding 802.1x machine authentication (EAP-TLS) and user password authentication (PEAP), but none about dual EAP-TLS authentication using certificates for machines and users at the same time. I think I can figure out how to configure such a policy in ISE, but options seem to be lacking on the client end. For example, the Windows 7 supplicant seems only able to present either a machine or user smart card certificate, not one then the other. Plus, I am not sure how the client would know which certificate to present, or if the type can be specified from the authenticator.Hope this video link will help you
http://www.labminutes.com/sec0045_ise_1_1_wired_dot1x_machine_auth_eap-tls -
Outlook 2010 "The server is unavailable" using smart card Exchange 2010
I have a XenApp 6.5 environment, that uses smart card authenication for login. All the office applications will open except for outlook. Outlook opens up and shows a prompt saying "Connecting" ...."Then server is unavailable".
If I removed the smart card authenication from the XenApp environment, User are able to open Outlook with no problem.
My question, is there something with exchange 2010 that needs to be turned on for smart card authenication?Hi,
I suggest you remove any existing certificate-based credentials from the Credential Manager and use the
EnableSmartCard registry setting to check the result. The Outlook client may not be properly configured to work with saved smart card credentials.
Important
Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it,
back up the registry for restoration in
case problems occur.
Remove existing certificate based credentials
The first step to prevent a PIN lockout is to delete any existing certificate based credentials that were saved by Outlook.
Open Control Panel.
Double-click Credential Manager.
See whether there is a Certificate-Based credential similar to the following:
@@BSUgiZQZ54Pf6cEtxKflWHH
Also, see whether there is a Generic credential similar to one of the following:
MS.Outlook.14:[email protected]:PUT
MS.Outlook.15:[email protected]:PUT
Note 14 indicates Outlook 2010 saved the credential and 15 indicates Outlook 2013.
If these are both present and were created or changed at the same time, they are likely smart card credentials saved from Outlook. Click the first credential to expand it and to show the details. Then, click Remove to delete the
credential from Credential Manager.
Repeat step 4 for each one of the credentials listed in step 3.
When you are finished, close Credential Manager.
Configure the EnableSmartCard registry setting
The second step to prevent a PIN lockout is to create the EnableSmartCard registry setting.
Outlook 2010
For Outlook 2010, the EnableSmartCard registry setting was introduced with the Microsoft Outlook 2010 hotfix package dated December 13, 2011 (KB2597028). We recommend that you install the most recent build of Outlook 2010. For more information
about the latest applicable updates for Outlook, click the following article number to view the article in the Microsoft Knowledge Base:
2625547 How to install the latest applicable updates for Microsoft Outlook (US English only)
To create the EnableSmartCard registry value, follow these steps:
Exit Outlook.
Start Registry Editor.
Create the following registry values at the specified locations:
Note Manually create any registry keys or values if they do not exist.
Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\RPC
DWORD: EnableSmartCard
Value: 1
Exit Registry Editor.
For this question, if you need to get more information about Exchange 2010, I suggest you post the question in Exchange forum:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Problem getting started weblogic server (for BI Publisher)
Hello,
I am trying to run services BI publisher
But I can't because I have the following error:
SVR_GRP =
JAVA Memory arguments: -Xms256m -Xmx1024m
WLS Start Mode=Production
CLASSPATH=C:\BI11\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\BI11\Oracle_BI1\bifoundation\jdbc\jdk16\bijdbc.jar;;C:\BI11\patch_wls1035\profiles\defaul
t\sys_manifest_classpath\weblogic_patch.jar;C:\BI11\JROCKI~1.2-4\lib\tools.jar;C:\BI11\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\BI11\WLSERV~1.3\server\lib\weblo
gic.jar;C:\BI11\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\BI11\WLSERV~1.3\server\lib\webservices.jar;C:\BI11\modules\ORGAPA~1.1/lib/ant-all.jar;C
:\BI11\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\BI11\wlserver_10.3\server\lib\weblogic.jar;C:\BI11\oracle_common\modules\oracle.dms_11.1.1\dms.jar;C:\BI11\or
acle_common\modules\oracle.jmx_11.1.1\jmxframework.jar;C:\BI11\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar;C:\BI11\oracle_common\modules\oracle.odl_11.1.
1\ojdl.jar;C:\BI11\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\BI11\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\BI11\ORACLE~1\modules\orac
le.jrf_11.1.1\jrf.jar;C:\BI11\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\BI11\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\BI11\patch_wls1035\profiles\default\native;C:\BI11\WLSERV~1.3\server\native\win\32;C:\BI11\WLSERV~1.3\server\bin;C:\BI11\modules\ORGAPA~1.1\bin;C:\BI11\
JROCKI~1.2-4\jre\bin;C:\BI11\JROCKI~1.2-4\bin;C:\oracle11g\dbhome\bin;C:\;C:;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\VAIO;C:\Program Files\Ja
va\jre6\bin;;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\E900\system\bin32;C:\E900\DEMO\bin32;C:\BI11\Oracle_BI1\products\Essbase\EssbaseServer\bin;
C:\BI11\Oracle_BI1\bin;C:\BI11\Oracle_BI1\opmn\bin;C:\BI11\Oracle_BI1\opmn\lib;C:\BI11\Oracle_BI1\perl\bin;C:\BI11\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1429-windows-ia32,
compiled mode)
Starting WLS with line:
C:\BI11\JROCKI~1.2-4\bin\java -jrockit -Xms256m -Xmx1024m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\BI11\WLSERV~1.3\server\lib\weblogic.policy -D
weblogic.ProductionModeEnabled=true -Doracle.home=C:\BI11\Oracle_BI1 -da -Dplatform.home=C:\BI11\WLSERV~1.3 -Dwls.home=C:\BI11\WLSERV~1.3\server -Dweblogic.hom
e=C:\BI11\WLSERV~1.3\server -Dcommon.components.home=C:\BI11\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk
14Logger -Ddomain.home=C:\BI11\USER_P~1\domains\BIFOUN~1 -Djrockit.optfile=C:\BI11\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config
.dir=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1 -Digf.a
risidbeans.carmlloc=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\arisidprov
ider -Doracle.security.jps.config=C:\BI11\USER_P~1\domains\BIFOUN~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\BI11\USER_P~1\domains\BIFOUN~1\
servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\BI11\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\BI11\ORACLE~1
\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=C:\BI11\Oracle_BI1
-DEPM_ORACLE_HOME=C:\BI11\Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=C:\BI11\Oracle_BI1 -DHYPERION_HOME=C:\BI11\Oracle_BI1 -DEPM_ORACLE_IN
STANCE=novalue -Dhyperion.home=C:\BI11\Oracle_BI1 -DEPM_REG_PROPERTIES_PATH=C:\BI11\USER_P~1\domains\BIFOUN~1\config\fmwconfig -Depm.useApplicationContextId=fal
se -Doracle.biee.search.bisearchproperties=C:\BI11\Oracle_BI1\bifoundation\jee\BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=
true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enableJSSE=true -Dfile.enc
oding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.services.BIS
earchServiceConfiguration -Dxdo.server.config.dir=C:\BI11\user_projects\domains\bifoundation_domain\config\bipublisher -DXDO_FONT_DIR=C:\BI11\Oracle_BI1\common\
fonts -Dem.oracle.home=C:\BI11\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dw
lw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\BI11\patch_wls1035\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
<Apr 10, 2012 3:07:11 PM CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable thi
s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Apr 10, 2012 3:07:11 PM CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true><Apr 10, 2012 3:07:12 PM CEST> <Info> <WebLogicServer> <BEA-000377> <Starting We
bLogic Server with Oracle JRockit(R) Version R28.1.3-11-141760-1.6.0_24-20110301-1429-windows-ia32 from Oracle Corporation>
<Apr 10, 2012 3:07:12 PM CEST> <Info> <Management> <BEA-141107> <Version: Weblogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Apr 10, 2012 3:07:14 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Apr 10, 2012 3:07:14 PM CEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Apr 10, 2012 3:07:15 PM CEST> <Notice> <Log Management> <BEA-170019> <The server log file C:\BI11\user_projects\domains\bifoundation_domain\servers\AdminServer
\logs\AdminServer.log is opened. All server side log events will be written to this file.>
Apr 10, 2012 3:07:23 PM oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider pushLdapNamesTolibOvd
SEVERE: JPS-02592
<Apr 10, 2012 3:07:23 PM CEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception sta
ck trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Er
ror message: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context "default", cause: org.xml.sax.SAXParseExcep
tion: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.>
<Apr 10, 2012 3:07:23 PM CEST> <Critical> <WebLogicServer> <BEA-000386> <Serversubsystem failed. Reason: weblogic.security.SecurityInitializationException: The
loading of OPSS java security policy provider failed due to exception, see theexception stack trace or the server log file for root cause. If still see no obv
ious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-02592: Failed to push ldap config data to libOvd f
or service instance "idstore.ldap" in JPS context "default", cause: org.xml.sax.
SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message:JPS-02592: Failed to push ldap config data to libOvd for service instance "idsto
re.ldap" in JPS context "default", cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context "def
ault", cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktraceCaused By: oracle.security.jps.JpsException: JPS-02592: Failed to push ldap conf
ig data to libOvd for service instance "idstore.ldap" in JPS context "default",cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Erro
r) Start of root element expected.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3099)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap"
in JPS context "default", cause: org.xml.sax.SAXParseException: <Line 2, Column1>: XML-20108: (Fatal Error) Start of root element expected.
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider$NoLibOvd.getInstance(LdapIdentityStoreProvider.java:341)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:118)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.igf.IGFException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context
"default", cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider.pushLdapNamesTolibOvd(OvdIGFServiceProvider.java:321)
at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider.prepareDataPush2libOvd(OvdIGFServiceProvider.java:370)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider$NoLibOvd.getInstance(LdapIdentityStoreProvider.java:339)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:118)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:74)
Truncated. see log file for complete stacktrace
Caused By: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (FatalError) Start of root element expected.
at oracle.ods.virtualization.engine.config.parsers.ConfigErrorHandler.fatalError(ConfigErrorHandler.java:101)
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:432)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:414)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:356)
Truncated. see log file for complete stacktrace
Caused By: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (FatalError) Start of root element expected.
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:414)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:355)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
Truncated. see log file for complete stacktrace
>
<Apr 10, 2012 3:07:23 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Apr 10, 2012 3:07:23 PM CEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Apr 10, 2012 3:07:23 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
help me please
Thanks.
Edited by: 842284 on 10 avr. 2012 07:41Hi,
Please navigate to the fmwconfig folder and check the adapters.os_xml file.
$DOMAIN_HOME/config/fmwconfig/ovd/default/adapters.os_xml
There are chances the adapters.os_xml file could be corrupted due to which the Weblogic server fails to start.
Please verify if the adapters.os_xml file is valid.
In case the file is corrupted, please perform the following steps :
1) Take a backup of $DOMAIN_HOME/config/fmwconfig/ovd/default/adapters.os_xml
2) Delete $DOMAIN_HOME/config/fmwconfig/ovd/default/adapters.os_xml
3) copy adapters.os_xml from $MW_HOME/oracle_common/modules/oracle.ovd_11.1.1/templates/ to $DOMAIN_HOME/config/fmwconfig/ovd/default/
4) Restart the server.
Regards,
Kal -
Configuring weblogic server to start automatically
Hi, I have installed oracle weblogic server 11g, jdk/jre 7 and forms & reports 11g. i have successfully installed all softwares. I configured forms and reports domain and weblogic domain. I would like to have weblogic start automatically when i login in to comp/server. Right now i have to click on the start admin server for weblogic server domain button in domain folder and the stop admin server button. I also have to type in the username and password into the cmd promt when i click the start and stop admin server buttons.
How can i have the forms and reporst weblogic server start automatically?
how can i get past not having to enter in username and password each time it starts up and stops? (this is entering the username and password before you get to the weblogic console login screen)i configured it as a windows service. i followed the instructions from the link you provided and when i finished i named the file "startweblogic.cmd." I put the file in the "WL_HOME\server\bin" directory which also has the installsvc.cmd file in and ran it as administrator.
tHIS IS A COPY OF WHAT WAS DISPLAYED:
C:\Windows\system32>echo off
C:\Windows\system32>set CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\pr
ofiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~
1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Or
acle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\feat
ures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Orac
le\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
* To start WebLogic Server, use the password *
* assigned to the system user. The system *
* username and password must also be used to *
* access the WebLogic Server console from a web *
* browser. *
C:\Windows\system32>rem *** Set Command Line for service to execute within creat
ed JVM
C:\Windows\system32>set CMDLINE="-client -Xms32m -Xmx200m -XX:MaxPermSize=128m -
XX:+UseSpinning -Dweblogic.management.server=http://hidden:hidden -Dweblo
gic.Stdout="D:\TEMP\Svr_Logs\stdout.log" -Dweblogic.Stderr="D:\TEMP\Svr_Logs\std
err.log" -Xverify:none -classpath \"C:\Oracle\MIDDLE~1\patch_wls1036\profiles\de
fault\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\
profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK1
7~1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\fe
atures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Or
acle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;\" -Dweblogic.Name=hidden -Dweblogic.management.username=hidden -Dweblogic.management.server
=\"http://hidden:hidden\" -Dweblogic.ProductionModeEnabled= -Djava.securi
ty.policy=\"C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy\" weblogic.
Server"
C:\Windows\system32>goto finish
C:\Windows\system32>rem *** Set up extrapath for win32 and win64 platform separa
tely
C:\Windows\system32>if "false" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV
~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\J
ava\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1
.3\server\native\win\32\oci920_8
C:\Windows\system32>if "false" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV
~1.3\server\native\win\64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\
Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\64\oci920_8
C:\Windows\system32>if "true" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\x64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\
Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\x64\oci920_8
C:\Windows\system32>rem *** Install the service
C:\Windows\system32>"C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin\beasvc" -install -
svcname:"beasvc Hidden_hidden" -javahome:"C:\PROGRA~1\Java\JDK17~1.
0" -execdir:"C:\Oracle\Middleware\user_projects\domains\hidden\config"
-maxconnectretries:"3" -host:"hidden" -port:"hidden" -extrapath:"C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\native\win\x64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\b
in;C:\PROGRA~1\Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8" -password:"hidden" -cmdl
ine:"-client -Xms32m -Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Dweblogic.m
anagement.server=http://HIDDEN:HIDDEN -Dweblogic.Stdout="D:\TEMP\Svr_Logs
\stdout.log" -Dweblogic.Stderr="D:\TEMP\Svr_Logs\stderr.log" -Xverify:none -clas
spath \"C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath
\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifes
t_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0\lib\tools.jar;C:\Oracl
e\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\s
erver\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modul
es_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Orac
le\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA
~1.0_1/lib/ant-contrib.jar;\" -Dweblogic.Name=HIDDEN -Dweblogic.managem
ent.username=HIDDEN-Dweblogic.management.server=\"http://HIDDEN:HIDDEN\" -Dweblogic.ProductionModeEnabled= -Djava.security.policy=\"C:\Oracle\MIDDLE
~1\WLSERV~1.3\server\lib\weblogic.policy\" weblogic.Server"
CreateService failed - The specified service already exists. (0x431)
C:\Windows\system32>ENDLOCAL
C:\Windows\system32>pause
Press any key to continue . . .
Edited by: 975620 on Apr 3, 2013 11:31 AM
Edited by: 975620 on Apr 3, 2013 11:32 AM -
Remotely login error on windows server 2003 using gemalto smart card
I am getting this error when trying to log on windows server 2003 remotely using smartcard. We have our own CA. We are able to successfully logon on windows server 2008 using same card.
Hi,
Base on my research, Event 537 indicates that a logon attempt was made and rejected for some reason other than those covered by explicit audit records in this category.
Would you please provide more details?
Are there any related warnings and errors under Application Logs or System Logs?
By remotely login, do you mean logon via RDP?
Here are some related links below for you references:
Event 537
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.0&EvtID=537&EvtSrc=Security&LCID=1033
Smart Card and Remote Desktop Services
http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
Please get back to us with the necessary information at your earliest convenience.
Best Regards,
Amy Wang -
Configuring weblogic domain for IAM using WLST
Hi All,
i have to configure a weblogic domain using wlst(off-line).i am able to do this by using wls.jar template but that domain does not contain all the deployable component which is required for IAM ,IDM.
I don't know how to set the configuration component which is required for IAM,IDM as asked configuration wizard aske when we use GUI mode and how to give the schema details.
please give any idea how to configure a domain(for IAM,IDM) using WLST exactly same as GUI mode .
thanksI'm not sure what is your problem, but there is no compatibility issue between CSS and Bind normally.
The docuement you referenced only says, in the background section, that the DNS server itself needs to be configured so part of your domain is handled by the CSS.
So, your dns server handles all request for your.domain but there is one NS entry forwarding request for www.your.domain to the CSS so the CSS can answer the dns request.
The css is not able to handle all types of dns request (ie: email server ip address request) so you can configure a 'dns forwarder' on the css to forward the request to another dns server.
See the following for dns forwarder config example
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d3b52.shtml
Regards,
Gilles.
Thanks for rating. -
How to configure mail server for subscription
Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
RayHi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray -
Support for smart-card authentication in PowerBuilder based application
Hi, I have an application on PB11.5 with an Oracle DB back-end (11.2g). My DoD customer wants the application to use their DoD CAC Card (Smart Card) to authenticate against the Enterprise - Windows Active Directory domain, currently the application uses user-id\password for user authentication. Is this something newer versions of PB can support and implement? Thank you.
You have a couple of choices:
1. Depending on how old their workstations are, or if they have ACTIVCLIENT installed, you could call the CAPICOMM ActiveX using OLE commands
2. A solution that doesn't require that ActiveX is to use the Smart Card SDK built into newer versions of Windows. It does require a lot lower level coding though, as you have to issue specific APDU commands to the card and know how to handle the responses.
I posted a sample of the latter to the NNTP groups back in 2011. I suppose I should get around to creating a blog entry explaining how to use it.
Maybe you are looking for
-
Is there a way to import movies to iTunes?
Is there a way to import movies that I already own to iTunes?
-
Why does InDesign always open multiple files in reverse number order?
Whenever I select multiple InDesign files to open, despite being named accordingly Page_01, Page_02, Page_03, etc. InDesign always opens them in reverse order tabs. If I open 10 spreads at once instead of staring at page 1 I'm looking at the back. Is
-
Smart Collection - can source be named Collection Set?
If I specify a smart collection rule that says the source must be a collection matching some pattern, does this only apply to actual collections and exclude collection sets? I was hoping fo a way to build a rule based on the collection set ... is thi
-
TS3274 Ipad won't turn on no matter what I do.
Ipad will not turn on no matter what I do. It remains off.
-
I have a source code: import javax.vecmath.Matrix3d; public class Matrix public static void main(String[] args) Matrix3d rotMat=new Matrix3d(); rotMat.setElement(0,0,1); rotMat.setElement(0,1,0); rotMat.se