How to configure where the jsp _pages directory is created?

Hi,
I am running iAS 1021 for use with Portal. We have all our jsp's
deployed in a read only environment. When JServ tries to run the
jsp, it attempts to create the _pages directory for the compiled
class file but it can't do so as it is trying to create it in
the read only area. How can I tell Jserv to create the _pages
directory somewhere else? I have tried using the
servlet.ojsp.initArgs=page_repository_root=<directory>
but this has no effect.
Any help is appreciated.
Roger

No, Apache _home is a sort of the base directory for
the apache installation. According to some literature I read today, this directory should've been /usr/local/apache/bin/, but that's not where I found my apache install (cygwin, I let the installer handle all the defaults).
Mine was under /usr/sbin/, and to be correct I was looking for the httpd.exe (cygwin specific) file.
I'd suggest running a find / -name (file you are looking for) to locate your resources.

Similar Messages

  • How to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM

    Hello Guru's,
    Request for information on smart documentation on the integration between Trade Promotion Management and SCM-Demand Planning from an architecture perspective how to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM and from TPM promotions values can be considered in to APO demand planning: can anybody give me some insight on it.
    Thanks in advance.
    Kumar

    Hi Praveen
    There are several ways you can connect a DP system to a TPM. How are your interfaces and systems setup?
    Option1:
    Extract the baseline from APO to a BW cube, extract the data out of BW, may be using infospokes/open hub and pass it on to TPM.
    2. Have a custom program written in APO-DP to extract the selected keyfigure data at the aggregation level into an interface or a .txt file into APO directory and use some data transfer service such as EDI to take this data and send to TPM.
    In my experience it is simple to define an integration process. The much larger and complicated aspects are the date adjustments and the aggregation levels.
    Date adjustments:
    Understand the basis of the data in APO and TPM. APO is usually at the requested delivery date or material availability date ( when the customer like a store wants the product). However TPMs are usually at the consumption date ( when an end customer like you and me but from store shelf). Depending on the product and business style this can mean several days difference. Let's say it is 25 days on average, you need to add 25 days to APO base line date to get the TPM consumption date.
    Aggregation level:
    This can be product or customer. If the planning in DP is at product sku level and the TPM is at packs or brand level, you need to aggregate the data up before loading to TPM. The same with customer.
    To me the most complex part of the integration is to understand and transform the data in a meaningful way and a strategy to sustain this integration by keeping both DP and TPM in sync in terms of master data. Also important to have a process for identifying exceptions and failures. you send baseline from DP to TPM and if it fails, how do you know? how do you trouble shoot?
    Hope these help.

  • No sender agreement configured in the XI Integration Directory

    Hi,
    I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
    Thanks & Regards
    Sruj

    Thanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
    Once again thanks a lot for everyone.
    Thanks & Regards,
    Sruj
    Message was edited by: Srujan Gogineni

  • How can I browse the tftp/ftp directory on Cisco PI 2.0?

    Hi All,
    I just installed Cisco PI 2.0 on a virtual appliance and I'd like to browse the tftp/ftp directory. I ssh'ed in but couldn't figure out how. With WCS running on Windows, I can easily browse those folders. Please let me know how I can browse the tftp/ftp directory on Cisco PI 2.0 to check what files are in there.
    Thank you.
    Robert

    Hi Robert,
    To configure tftp\ftp:
     go to Configure > TFTP/FTP Servers > Add TFTP/FTP Server
    To access it :
    The easiest way to configure a remote FTP server would be with the steps
    below:
    1) Access your server via CLI and access the configuration mode:
    ncs/admin# conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    ncs/admin(config)#
    2) Create an FTP repository with the commands below:
    ncs/admin(config)# repository localFTP
    ncs/admin(config-Repository)#
    3) Setup the username, password and server address:
    ncs/admin(config-Repository)# url ftp://1.1.1.1
    ncs/admin(config-Repository)# user ftpAdmin password plain 12345678
    ncs/admin(config-Repository)# exit
    ncs/admin(config)# exit
    4) Save the NCS configuration:
    ncs/admin# wr mem
    The use of a different partition is not officially supported as only
    folders under the /localdisk partition can be read by the application.
    The only supported server types include TFTP, FTP, SFTP, NFS.
    TFTP\ftp contains  PI backups \database backup  , configbackups etc..
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • How can I open the windows file directory in "WHEN-BUTTON-PRESSED" trigger

    Dear All,
    How can I open the windows file directory in “WHEN-BUTTON-PRESSED” trigger?

    Blessan Joseph,
    The solution is dependent on your Forms version and if your applications is traditional Client/Server (CS) (Forms 6i and lower) or web deployed (Forms 6i and higher). For CS, you would use the Get_File_Name() built-in as Faa demonstrated. For Web, you will need to use the WebUtil library function Client_Get_File_Name() as Sarah (OGIR) demonstrated. Both of these functions will return the full path to a file. Note: WebUtil is an external library so it requires you to perform some configuration on your developer client as well as on the Application Server. WebUtil is included with Forms 9i and higher, but you must download it for Forms 6i.
    My requirement is user should able to select windows directory for the output.Do you really need to allow the user to write to a file in the Windows directory? This is very dangerous and you should not allow users or programs to write to the Windows directory. Users should only be able to write files to "User" directories (\My Documents\<Directory name>).
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How can i access the jsp file in a asp file

    Hi every one..
    we have two projects one is developed in ASP and one is developed in JSP both are running in two different locations.
    now i want to include a jsp file from one project to ASP file in the other project.
    please tell me how can i insert the JSP file in ASP application.
    thanx in advance.

    Wouldn't that be an ASP question for an ASP forum?

  • In standard programmes how to know where the fields are in the code...Urge.

    How to find where the coding of the fields displayed in the standard transactions is written.FOr example In XD0l if I want to find out where the 'key term' is coded in the stadard programe of the transaction XD01.When I go into sytem--->status,I will get to see a window showing the details,In that we can see 3 PRAGRAMS-PROGRAM(SCREEN),PROGRAM(SUB SCREEN) AND PROGRAM (GUI).Can nay one explain the significance of these 3 programs.

    Hi Henry,
    I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
    If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
    PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
    PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
    PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
    Srinivas

  • How to find where the below sql is used in database

    Hi all,
    I am tring to find the below SQL in our data base where it is used?
    I had done the checking in all reports manually, But have no luck.
    But i am sure that the below sql is in our data base and having some issue on it.
    Can any one please let me know how to find where the below query is used in our database? I mean in packages/ triggers/ procedures or any where in our database
    Please find the query
    select count(sh.shipment_gid) from SHIPMENT sh, SHIPMENT_TYPE stp, LOCATION ld where (sh.shipment_gid in (select sstop.shipment_gid from SHIPMENT_STOP sstop where (sstop.appointment_delivery > trunc(TO_DATE(:1, :2), :3)) and (sstop.appointment_delivery is not null))) and (sh.is_to_be_held=:"SYS_B_0") and (sh.domain_name=:4) and (sh.insurance_policy_number like :"SYS_B_1") and (sh.perspective=:"SYS_B_2") and (sh.shipment_type_gid=stp.shipment_type_gid) and (sh.dest_location_gid=ld.location_gid(+)) and (stp.shipment_type_xid!=:5) order by ld.location_name, sh.start_time
    Regards,
    Dpk

    There is video demonstration how to import from data dictionary.
    After import you can select from the main menu: View->DDL File Editor menu item to open the DDL dialog and then click on "Generate" button on the dialog. When the DDL is generated you can search in it using "Find" button.
    Ivan

  • How to find where the screen field is stored in table

    Hi all,
    How to find where the screen field  is stored in the table .
    for some transactions if i press F1 on the field and after checking for the technical help.
    I can only find the struture for the screen field, but whereas i need table name for it.
    Can anybody help me how to find the table name where the field is stored.
    Regards,
    Madhavi

    Hi,
    Just hitting a F1 on screen field and getting structure name will not help in getting table name.
    First you need to know the flow of data in the reqd module, which will help you know all the tables in that module with there most of the fields with the data flow, now you need to work on your own to figure out that in which actual tables that value is stored.
    Hope this helps you.
    Regards,
    Tarun

  • How can I change the IP at Directory Server?

    Hello
    I try change to IP address of iPlanet Server.
    I followed job the order by the Administrator's guide.
    but I can't update IP in Directory Server.
    ldif2db -i xxx.ldif command show warnning message.
    "[31/Oct/2001:00:17:04 +0900] - ldif2db: WARNING, skipping duplicate
    entry ..."
    How can I cange the IP in Directory Server?

    Hello,
    Do you have root access to that machine? You should /etc/hosts with vi, modify the IP and then force the writing, because it�s a read only file. You can force this using w! instead of w. This way, if you have root permission, you should commint the change.
    Good luck!
    jmiturbe

  • Do NOT share the JSP Working Directory among WL instances

              Somewhere in the WLS documentation it says it's ok to share
              directories among WLS instances in a cluster.
              It is NOT OK to share the JSP Working Directory because the
              instances are not synchronized about compiling JSPs and it
              is possible for one instance to be writing to a .class file
              while another instance is trying to load it.
              At least one site has told me they had 'class loading problems'
              and that the problems disappeared when they used separate
              JSP working directories.
              Mike
              

    Mike,
              We got around this by 1, pre-compiling all the pages, and 2, at server
              startup, copying all newer pages local. This does require a restart to put
              new pages into production but it works great for us.
              Mica
              "Mike Reiche" <[email protected]> wrote in message
              news:3af6dab7$[email protected]..
              >
              >
              > Somewhere in the WLS documentation it says it's ok to share
              > directories among WLS instances in a cluster.
              >
              > It is NOT OK to share the JSP Working Directory because the
              > instances are not synchronized about compiling JSPs and it
              > is possible for one instance to be writing to a .class file
              > while another instance is trying to load it.
              >
              > At least one site has told me they had 'class loading problems'
              > and that the problems disappeared when they used separate
              > JSP working directories.
              >
              > Mike
              >
              >
              

  • How I can erase the components that I have created in a content area?

    hello. Somebody knows how I can erase the components that I have created in a content area. I have created an area of content and the archives, categorias or perspective that I generate not let erase. The same it happens to me to the forms, reports and other components created under a certain application

    goto portal navigator --> content areas --> next to the content area --> click Edit Properties --> Items tab --> last button on the page is Purge..
    this should take care of it

  • How can I maintain the classification in UI when creating a new BP?

    SAP CRM 2007 (UI)
    Hi,
    In SAP GUI the classification can be maintained in tab “classification”.
    How can I maintain the classification in UI when creating a new BP?
    Thanks for your support.
    Regards,
    AV

    Hi Anand,
    thanks for your prompt answer.
    By default all ship-to-parties are assigned to classification “Customer”. How can we assign a different classification to ship-to-parties in UI? The view “Account classification” seems to be different from the tab “classification” in SAP GUI.
    Regards,
    AV

  • I am using the trial version of pages. how do i transfer the letter heading i have created to Word as a template? comes out fuzzy in Word when i try.

    i am using the trial version of pages. how do i transfer the letter heading i have created to Word as a template? comes out fuzzy in Word when i try.

    IP = Intellectual Property.
    You want to take the artwork from Pages, which you haven't paid for, into a competing product?
    Peter

  • How to configure security realm for Active Directory ?

    Hi,
    Can any body suggest how to configure security realm in weblogic 8.1
    I have simple login page where in user can enter his credentials, and i have MS-Active Directory where we maintain all users.
    users who loged into web application has to be authenticated from Active Directory.
    please suggest what are the steps that we need to follow
    thanks in advance

    Hi Sankar,
    You can login to the weblogic server admin console and create a new realm.
    Once you have created the realm you can add the authentication provider.You add the Active Authentication Provider.But you must have the the configuration inforamation of MS AD.You can read my blog http://dev2dev.bea.com/blog/bishnu_kumar/
    where the integration is with iPlanet LDAP.Steps will be similar.
    You must have a login portlet in your portal application and that should have been in accordance with j2ee security standards.For example you may use basic authentication or userlogin control or p13n API
    Regards
    Bishnu

Maybe you are looking for