How to configure XSLT Helper for WPC content
Hi,
I'm trying to write my own XSLT Helper and use it when rendering content on WPC web pages. I didn't find any documentation on this topic, so I did mimicked what SAP does with their com.sap.nw.wpc.km.service.linkmanager.XsltHelper:
1. Wrote my little class that contains static method:
public class MyXslHelper
public static String testMethod()
return "response from MyXslHelper";
2. Added declaration of namespace and usage in xsl template:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:my_hlp="com.my.xsl.helper.MyXslHelper">
<xsl:value-of select="my_hlp:testMethod()"/>
3. Defined helper in Content Management->Web Page Composer->Editor->XSLT Helpers:
name=my_helper
alias=my_hlp
implementation=com.my.xsl.helper.MyXslHelper
description=My helper
PRT mode=*
This doesnt' work and when rendered throws exception java.lang.ClassNotFoundException: com.my.xsl.helper.MyXslHelper.
What are the steps that I'm missing? Does anyone have any documentation on how to configure xslt helpers?
Thanks in advance
Ruslan
Hi
Did you solve this issue?
Thanks!
Christof
Similar Messages
-
How to configure release procedure for rate contracts release
Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
if c1 is not there c2 has to be approved
Change in the value of the rate contract contract
Change in the validity of the rate contract
Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskarHi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES -
How to configure Broadcast messaging for IC Webclient profile
Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ramHi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha -
Error during TREX indexing for WPC content
Hello,
I have setup TREX to search Web Page Composer content. I am getting folowing error below during the indexing for WPC content. Any help would be great.
thanks
Jaish
[3508] 2008-08-11 15:19:19.842 e preprocessor Preprocessor.cpp(03957) : HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8002)
[3508] 2008-08-11 16:39:06.196 e preprocessor Preprocessor.cpp(01167) : HTTPHEAD failed for URL http://sjcsapqapt.datadomain.com:50300/irj/servlet/prt/portal/prtroot/docs/guid/80fa1c8c-1b4a-2b10-38ab-b20f54134ca1?prtmode=trex with Httpstatus 500
[3508] 2008-08-11 16:39:06.212 e preprocessor Preprocessor.cpp(03957) : HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)there was problem with Index creation the way I was creating it.
-
How to create Search Help for a field in Table control !!
Hello Friends,
I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
SenthilCheck the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
break gblap0.
ws_dynpfld-stepl = mprn-current_line.
LOOP AT i_mprn.
MOVE i_mprn1-mprn TO i_mprn-mprn.
MOVE ws_postcode TO i_mprn-post_code.
MODIFY i_mprn INDEX
mprn-current_line." transporting MPRN POST_CODE.
ENDLOOP.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
gntc LIKE iflot-zzgntc,
END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZZGNTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select Gas Nomination Type Code'
value_org = 'S'
TABLES
value_tab = lt_gntc
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
ws_dyname1 LIKE d020s-prog,
ws_dynumb1 LIKE d020s-dnum,
ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-MPRN'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-POST_CODE'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash. -
How to get F4 help for Standard Text Key of a operation based on Order type
Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
BujjiHi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM -
How can I get help for ADE downloads from the public library. I am suddenly getting error messages
How can I get help for ADE downloads from the public library. It worked for years and now I am getting error messages. I cannot find any practical help
If you are trying to open the book on a device, try using the latest DL Reader on Android and iOS
https://play.google.com/store/apps/details?id=com.datalogics.dlreader&hl=en -
CLM How to add search-help for extension field(New Company Field) in MA.
Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyChengHello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma -
How to add F1 help for a field on ALV grid
Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A. -
How to add search help for standard field LIKP-TRAID
Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
AbhiHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
How to create Search Help For Ztable fields
Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek . -
How to configure Email notification for User login's in Exchange Infrastructure?
How to configure Email notification for User login's in Client Machines?
Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham -
How to configure SMTP server for osb 10.3.1
Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something. -
How to Provide search Help for files on Application Server
Hi Guys,
Can anyone tell me How to Provide search Help for files on Application Server. I have put a file name on selection screen. I want to give search help for files on application server.
Thanks & Regards.
Harish.Hi Harish,
Use the following code,
tables sxpgcotabe.
data: lt_execprot LIKE btcxpm OCCURS 0 WITH HEADER LINE,
w_filepath(60) TYPE c, --> length depending on your Directory path.
SELECT SINGLE *
FROM sxpgcotabe
WHERE name = 'LIST_DB2DUMP'
AND opsystem = sy-opsys.
IF sy-subrc <> 0.
SELECT SINGLE *
FROM sxpgcotabe
WHERE name = 'LIST_DB2DUMP'
AND opsystem = 'UNIX'.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'External operating system command '
'LIST_DB2DUMP not found'.
ENDIF.
ENDIF.
sxpgcotabe-parameters = p_filepath. --> provide the directory path.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = sxpgcotabe-name
additional_parameters = sxpgcotabe-parameters
operatingsystem = sxpgcotabe-opsystem
TABLES
exec_protocol = lt_execprot
EXCEPTIONS
no_permission = 1
command_not_found = 2
parameters_too_long = 3
security_risk = 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry = 13
jobcount_generation_error = 14
OTHERS = 15.
IF sy-subrc <> 0.
MESSAGE e000 WITH text-e01 p_filepath. "Directory failed
ENDIF.
Loop round the directory list, split each line up into a line table
and get the last data for each line, should be the filename
Then build the dirlist.
REFRESH t_dirlist.
LOOP AT lt_execprot.
REFRESH t_dirline.
SPLIT lt_execprot-message AT space INTO TABLE t_dirline.
DESCRIBE TABLE t_dirline LINES w_nolines.
READ TABLE t_dirline INDEX w_nolines.
MOVE t_dirline-data TO t_dirlist-filename.
APPEND t_dirlist.
ENDLOOP.
Here you will get all the files in the directory mentioned in Application server.
For displaying them as a Search help use the FM '/BMC/ZPOPUP_GET_VALUE'
Pass the Internal table to this FM.
Regards,
Paul. -
How to configure Apache to serve static content? Please Help
Hi Guys,
I have a set of servers that are:
- Apache acting as a Load Balance;
- Admin Server;
- A cluster with 2 managed servers.
I have a web application deployed on my cluster, but I would like that the static content would be delivered by the Apache.
How should I do it?
Thanks in AdvanceHi Daniel,
A Reverse Proxy could do this but keep in mind that the primary goal of the RP is to shield your back channel infrastructure IP/access from either Internet or your private network e.g. secure your back channel infrastructure with a Firewall and expose it only to your Reverse Proxy infrastructure; quite effective for DoS type of attack.
Apache can be configured to do both static content as well as Reverse Proxy.
Regards,
P-H
http://javaeesupportpatterns.blogspot.com/
Maybe you are looking for
-
Just coming from Win and need Help with bootcamp/parallels+general osx stuf
Well I absolutely love my Mac. I'm just having some problems affording it financially, but when I compare this new MacBook Pro to other like computers, there's a very very small difference in the hardware, and Im usually building laptops that are sim
-
My brand new osx tiger dvd is scratched!
Right, is was initially meant to be an email to apple themselves but i seem unable to find an email address for them, i would write out my problem again but this per written email seems to sum everything up quite nicely... so perhaps my question is w
-
Greetings. Can you export a "batch list" the way you can in FCP? I would love to be able to print out a log file of my browsers files, but can't figure out how. Thanks. Jonathan
-
Windows XP to Windows 7 problem.
When I iried installing Windows 7, it will stop while attempting to expand the files and suddenly display an error code , like 08X-------070, sorry I forgot to write it down. But the disturbing part is my PC will not start again, as it comes up with
-
iTunes will come up, but will not load iTunes Store. Very Frustrated. I have the newest version installed on my laptop running Windows 7. Thanks in advance for your help.