How to control data

Hi,
When 2 SKUs are removed how to control data.
Regards,
krishna.

Hi Krishna,
The following is the process for controlling data during
SKU deletions
1) Once the SKU deletion confirmation is received, the
corresponding statistical/concensus forecast from DP
has to be deleted
2) The CVC's has to be deleted and time series needs to
be updated
3) The previous forecast if released to SNP has to be
deleted using transaction /sapapo/rlcdel
4) The demand generated in SNP/PPDS generated based
on previous planning run needs to be deleted
5) Integration models needs to be blocked for those SKUs
6) If there are any confirmed/firmed production orders, those
has to be deleted
7) Communication to be given to concerned plants not to
make that product
Regards
R. Senthil Mareeswaran.

Similar Messages

How to controll dates in the best way

Hello
I have a question regarding comparing dates. I'm about to make an application where the user can choose between 2 accounts 1)access for a week or 2) access for a month. So my first thought was to convert current date to milliseconds ( Number of milliseconds since 1/1/1970 (GMT)) which will be the "start date" and then add correct number of milliseconds to the "start date" to get exact "stop date". Then when the visitor is logging in I get the date of current day -->transform it to milliseconds (currentdate)-->and compare it to my "stopdatems" (A value in my class Visitor below") as I do below:
----------------------------------------controll when logging in-----------------------------------
Visitor v="Current visitor".
if(v.stopdatems<currentdate)[
ok=true;
-----------------------------------------Visitor--------------------------------------------------------
public class Visitor{
public String name;
public String idnr;
public Date startdate;
public Long startdatems; //startdate.getTime()
public Long stopdatems; //Lets say the visitor wants a trial for a week----> stopdatems=startdatems+(60*60*24*7*1000)
Is this a good way to do this or do you have any other suggestions
Thanks in advance!

Hi,
It's better to use the calendar class to increase the current date by one week or a month.
/Kaj

How to control data load in Info-Package using ABAP?

Hello Gurus:
I am trying to resolve couple of issues.
1. I need to load data DAILY Full Load into a Planning cube. I have the 0NETDUEDATE   for selection in the
     Info-package. I am getting data from anothe base A/R cube. I want to Load Daily ONLY those records
     for which the "0NETDUEDATE" is Greater than "System Date". I think the logic would be IF 0NETDUEDAT
     .GT. SYS-DATUM, bruing the record. What should be the statement in 'Result' for keeping the record?
     (I don't know ABAP, so need help here...!)
2. Similalry, before loading the data above, I want to delete all the existing records from Planning cube where
     0NETDUEDATE is GT System date (records loaded the previosu day need to be deleted as the amounts may
     have changed). How can I achieve this selective deletion automatically in PC??
Appreciate your feedback very much.
Thanks... SMaa

Hi Shruti,
1) If i understand your requirement correctly you need to load only data which has 0NETDATE greater then sydatum.
So you can do this in infopackage .Infopackage>Data selection->0NETDATE(field)-->type(colum).here you can selecy ABAP type(6).Now you create ABAP code in this.
Here in ABAP code you need to specify high and low range ,Also the relation character like GT or BT(between).
i guess some how ur code will look like this
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoObject      = 0NETDUEDATE
    Fieldname       = NETDUEDATE
    data type       = NUMC
    length          = 0000010
    convexit        = PERI6
form compute_NETDUEDATE
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
data: l_idx like sy-tabix.
          l_idx = sy-tabix.
          l_t_range-low = sy-datum.
          l_t_range-option = 'GT'.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform.
i am not sure about coding but you can surely do it it is like specifying the ranges dynamically(you need to try it out)
(also as mentioned by others you can do this in traansformation routines)but infopackage routine you can directly write in PROD system.
2) And regarding the Selective deletion you donu2019t have nay process type in Process chain which does this
But there is function module u201C rsdri_infoprov_delete " which can be used to develop a program( I guess you must be having a existing ZProgram in ur system already available because this is used commonly.
Other wise you need to develop a ZProgram for this.
Thanks and Regards
Arun

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

How to modify changes of table control data in PAI

I have a table control where the columns are brought by dict fields.I am able to bring data into table control through an itab.
Now what i want is whenever user edits data in table control and clicks on save button the corresponding changes should be made in database.
For this according to my understanding we need to (in PAI) modify the changes in itab from the table control and then in SY-UCOMM of SAVE button we need to update in database table using itab.
For this , I am not able to write code for modifying the changes in itab from table control. Here is my code below.Please tell me how to do this.
PROCESS BEFORE OUTPUT.
MODULE FILL_DATA.
LOOP AT ITAB INTO ZEMPLOYEE_MASTER WITH CONTROL EMPTABLE CURSOR
EMPTABLE-CURRENT_LINE.
ENDLOOP.
MODULE STATUS_0001.
PROCESS AFTER INPUT.
LOOP AT ITAB.
   MODULE MODIFY_ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.
REPORT ZDATA_FORM1.
TABLES: ZEMPLOYEE_MASTER.
CONTROLS EMPTABLE TYPE TABLEVIEW USING SCREEN 0001.
data: begin of itab occurs 0,
       emp_no like zemployee_master-emp_no,
       name like zemployee_master-name,
       city like zemployee_master-city,
      end of itab,
      rowno TYPE I VALUE 1.
*&      Module STATUS_0001 OUTPUT
*       text
MODULE STATUS_0001 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module USER_COMMAND_0001 INPUT
*       text
MODULE USER_COMMAND_0001 INPUT.
MESSAGE 'Inside INPUT' TYPE 'I'.
CASE SY-UCOMM.
   WHEN 'SAVE'.
     UPDATE zemployee_master.
   WHEN 'EXIT'.
     LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0001 INPUT
*&      Module fill_data OUTPUT
*       text
MODULE fill_data OUTPUT.
select emp_no name city from zemployee_master into TABLE itab ORDER BY emp_no.
Describe table itab lines EMPTABLE-LINES.
ENDMODULE.                 " fill_data OUTPUT
*&      Module modify_itab INPUT
*       text
MODULE modify_itab INPUT.
* MODIFY itab from zemployee_master index
* MESSAGE 'Inside modify_itab' TYPE 'I'.
ENDMODULE.                 " modify_itab INPUT

Hi
In the following module of your code
MODULE modify_itab INPUT.
MODIFY itab from zemployee_master index tc-current_line " Where TC is the name of the Table control on the Screen
ENDMODULE.
Table control data gets refreshed on *enter*
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2165e990-0201-0010-5cbb-b5c2ad436140
Cheerz
Ramchander Rao.K

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

How to show data through table control

Hi Experts,
I have created an table control through wizard using table EKKO.
I have to populate one internal table( type ekko ), and then show it in output through table control.
Please advise, how to do that and in where i have to write the codes.
I will reward points for every suggestion
Thanks in advance.
regards

hi saubrab,
                This is kiran kumar.G.I am sending some sample code to populate data into table control check it once.
i will give input in 100 screen. and display table control in 200 screen.check it once once ..ok....
SE38 :(CODE)
*& Module pool       YMODULEPOOL_TABLECONTROL1                         *
*& DEVELOPER   : KIRAN KUMAR.G                                         *
*& PURPOSE     : TABLE CONTROL DEMO                                    *
*& CREATION DT : 17/12/2007                                            *
*& T.CODE      : YMODTABLECONTROL1                                     *
*& REQUEST     : ERPK900035                                            *
PROGRAM ymodulepool_tablecontrol1.
Tables
TABLES: yvbap, "Sales Document: Item Data
        vbak.   "Sales Document: Header Data
Controls
CONTROLS: my_table TYPE TABLEVIEW USING SCREEN 200.
Global Variables
DATA: gv_lines    TYPE i,
      gv_lines1   type i,
      gv_temp     type i,
      gv_flag(20) TYPE c VALUE 'DISP',
      gv_mode1    TYPE c,
      gv_mode     TYPE c VALUE 'C'. " C: Change, D :Display
Internal Table
DATA: BEGIN OF gt_item OCCURS 0,
        vbeln LIKE vbap-vbeln, "Sales Document Number
        posnr LIKE vbap-posnr, "Sales Document Item
        matnr LIKE vbap-matnr, "Material Number
        matkl LIKE vbap-matkl, "Material Group
        arktx LIKE vbap-arktx, "Short Text for Sales Order Item
        cflag,                  "Deletion Indicator
      END OF gt_item.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZTABLECONTROL' OF PROGRAM 'YMODULEPOOL_TABLECONTROL'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'DISP'.
      SELECT single vbeln
                    erdat
                    angdt
                    bnddt
               FROM vbak
              INTO (vbak-vbeln,vbak-erdat,
                    vbak-angdt,vbak-bnddt)
              WHERE vbeln = vbak-vbeln.
        IF sy-subrc EQ 0.
*Fetch the table control data and place them in Internal Table
          SELECT vbeln
                 posnr
                 matnr
                 matkl
                 arktx
            FROM yvbap
            INTO TABLE gt_item
            WHERE vbeln = vbak-vbeln.
          IF sy-subrc EQ 0.
*NO OF line in the Internal Table
            DESCRIBE TABLE gt_item LINES gv_lines.
            my_table-lines = gv_lines + 20.
          ENDIF.
        ENDIF.
*Call Screen 200.
        SET SCREEN 200.
      WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
*Exit from the Program
        CALL TRANSACTION 'SESSION_MANAGER'.
    ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
module STATUS_0200 output.
SET PF-STATUS 'ZTABLECONTROL1'.
endmodule.                 " STATUS_0200 OUTPU
*&      Module copy_data OUTPUT
      text
module copy_data output.
*Fetch the current line data from the Table control
read table gt_item index my_table-current_line.
if sy-subrc eq 0.
*Populating data into screen fields
gt_item-vbeln = gt_item-vbeln.
gt_item-posnr = gt_item-posnr.
gt_item-matnr = gt_item-matnr.
gt_item-matkl = gt_item-matkl.
gt_item-arktx = gt_item-arktx.
endif.
SE51:CODE (SCREEN 100)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
SE51 :CODE (SCREEN 200)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
loop at gt_item with control my_table cursor my_table-current_line.
module copy_data.
endloop.
PROCESS AFTER INPUT.
loop at gt_item.
MODULE USER_COMMAND_0200.
endloop.
                         HAVE A NICE DAY..
Award points if helpful,kiran kumar.G

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

Hi In ALE ,IDOC HOW CONTROL DATA IS TRANSFERRED

Hi Experts,
Hi In ALE ,IDOC HOW CONTROL DATA IS TRANSFERRED .
Thanks & Regards
Bhaskar Rao.M

Hi Bhaskar Rao,
Good Check out the following documentation.
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1230385,00.html
Some good links on ALE/IDOC
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
Good Luck and thanks
AK

How to control the data in data selection

Hi,
how to control the data .
in the transfer structure I am having 10 fields and and the file which is to be loaded contains 7 fields only.where can I control the other 3 fields and how .
thanks in advance
karna

If your source file is flat file, add extra three fields with blank (just add field separator say comma for each extra field) and then load. It should be ok.
Hope it helps..

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to add new row in KL02 trx - Activity type control data

Hi guys.
I am not a FI-CO consultant, but I want to add a row since KL02 transaction within a cost center, with a new fiscal year. When you access KL02 (change activity type), you set the activity type, then press Master Data and the basic screen appears. If you press the Display planning control button, you will see the "Display Activity Type Control Data" List. I wanna add a row for a specific cost center here, because the cost center I refer has not 2011 as fiscal year. I tried to use, since basic screen of KL02, use the Change planning control button, but when I set my cost center and 2011 as fiscal year, the Save button is inactive. Furthermore, I tried to press the Period screen and a message appeared "No data has been entered yet". So I dont know how to add one row for a cost center in the Planning control (Activity type control data) list of the KL02 transaction, specifically for an activity type. Do you know? Thanks in advance

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How to fetch the Table Control data to Customer Table(Z-Table) ?

How to fetch the Table Control data to Customer Table(Z-Table) ?

Hi Krishna,
Check this sample programs
http://www.planetsap.com/online_pgm_main_page.htm
http://sap.niraj.tripod.com/id29.html
http://www.sapdevelopment.co.uk/dialog/tabcontrol/tc_basic.htm
Have a look at below links. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
Thanks,
Reward If helpful.

How to post material master legal control data (Foreign trade export view)?

Dear Gurus,
Currently we have an external application which posts material master data into SAP using MATMAS IDOC through JCO. Now we have a requirement wherein we need to post legal control data ( especially ALNUM field) beisdes the regular views. MATMAS Idoc do not have a provision to post this specific field ALNUM ( Export control class).
Can you please suggest how to post this field value in to SAP. Do we need to use any other IDOC or RFM/BAPI as we do with classification view. In that case can you please suggest those relevant APIs.
Thanks in advance
Aman

Hi Aman,
I have got the same problem with this legal control field(ALNUM field).
There is no provison to post this field through IDOC. Can u please tell me what was the why u followed for this issue.
Thanks& regards,
Naren.

How to control data

Similar Messages

Maybe you are looking for