How to control DTR (FP-2000) with compatibility serial vi (not VISA)?

I need to directly control DTR on the serial port of an FP-2000, which doesn't support VISA. Any suggestions? Thanks.
Matt

Matt,
The VI located at vi.lib\platform\_sersup.llb\serial line ctrl.vi allows you to set DTR line. The acyual path in vi.lib depends on the version so if it is not there make a search in vi.lib directory for a file named _sersup.llb.
LabVIEW, C'est LabVIEW

Similar Messages

  • How to control an Xserve G4 with the serial port

    I have an Xserve G4 first generation, and was wondering exactly how you would go about connecting to it via serial port incase I need to change something when there is a network issue. I have looked around the internet without much success. It has Leopard Server on it, so Apple says the baud rate is 56700, and 8bit, no parity. So that's all set in the client machine, which is a MacBook Pro with a USB to Serial adapter on it, which shows up in Zterm. Once I'm in Zterm, it just sits there, and pressing enter doesn't prompt a log in. Does anyone see what else I'm most likely missing?
    Thanks

    Thanks for the reply Cemelot. Yes, I did create a profile in ZTerm. This is what I have it set to.
    I also read that you're supposed to run the command "/usr/libexec/getty serial.57600 /dev/tty.serial" on the Xserve itself.  It made no difference if I did that or not. I also checked to make sure tty.serial was inside /dev/. Anything else I'm missing? Thanks again.

  • How can i update my app with i tunes?not by my device.

    how can i update my app with i tunes?not by my device.

    Select Apps in iTunes sidebar. A list of all your apps should be displayed in the main window. At bottom right of the window is a Check for updates button. Click on it, then click to download the updated apps. It's also possible that iTunes checked for updatedin the background, in which case the check button will already display how many updates you have.

  • How can I track my mac with a serial number

    How do I track my mac with a serial number.  My computer was stolen and the find my mac wasn't enabled?

    You can't.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0
               9. Prey 0.6.2

  • TS1398 how come my ipod wont update with an error saying not connected to internet when it is

    how come my ipod wont update with an error saying not connected to the internet when it is?

    Try disabling the computer's antivirus and firewall during the download and update.

  • HT1349 how can you track you ipod with only serial number ]

    2nd Generation ipod Touch

    Hello, Tommyty,
    I am sorry you have lost your iPod.  You don't yet seem to understand that its serial number is not tracked electronically.  Here is my attempt at explaining the same thing that Limnos and stevejobsfan0123 have already told you. 
    Tommytj wrote: ... HT1349 how can you track you ipod with only serial number ] ...
    Only by physically looking at the iPod's serial number.
    Tommytj wrote: i need to find my ipod can anyone help me find a way to track my ipd touch with only a serial number using icloud.
    No.
    Nobody can help you with that request because iCloud and  "Find My iPod touch" do not work that way.
    If you cannot see the iPod, you cannot track its serial number.  Unless someone sees the serial number, nobody can track it.
    Regardless of whether you have properly installed and enabled "Find My iPod touch", iCloud does not track your iPod's serial number.  This is true even when you or someone else can see your iPod's serial number.
    Regardless of how much you wish iCloud could track your iPod's serial number, it cannot.
    "Find My iPod touch" can sometimes track an iPod's location but only under the specific circumstances Limnos has already explained to you. 
    If "Find My iPod touch" cannot locate your iPod by its location, there is no iCloud way to find it.  In that case, the only way to identify your missing iPod is for you or someone else to physically look at it.
    Perhaps you will be successful with one of these alternative possibilities for recovering your iPod:
      • you can physically search and find your misplaced iPod
      • someone may it returned in response to a reward that you offer
      • the police may find it after you have reported it stolen
    Message was edited by: EZ Jim
    Mac OSX 10.7.4

  • How to control my MacBook Pro with my iPhone ?

    I do wanna know how to control my Macbook pro just with my iPhone, please

    If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

  • How to Control authorization for users with certain status for level 2 WBS Element

    Dear All,
    Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
    Pre-requisite:
    There is only 2 level of project i.e.
    Lev_ WBSE_______Description
    1___ 7-14.E_______summay outage controller
    2___ 7-14.E.2310__ Plant/unit # 2310
    2___ 7-14.E.2310__ Plant/unit # 2220
    Project Controller  (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
    Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
    User ID_ Plant #
    123345_ 2310
    122455_ 2220
    Issue:
    After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
    Solution required: 
    Can any one tell how to control this scenario either by standard or enhancement available to control authorization
    BR
    Saqib Usman   

    Hi,
    Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
    Thank you and regards,
    Varshal Kachole
    The SCN Rules of Engagement

  • How to install Oracle developer/2000 with Oracle8i

    hi, my dear firends
    please show me how to install the Oracle Developer/2000 with Oracle8i. or where i can find the install guide for that.
    thank you
    yours
    frank

    Hi you !
    You can do steps:
    1. Install Oracle developer/2000 into Oracle Home: Default - the first.
    2. Install Oracle8i/9i into another Oracle Home - the seconde
    Good luck for you !
    [email protected]
    hi, my dear firends
    please show me how to install the Oracle Developer/2000 with Oracle8i. or where i can find the install guide for that.
    thank you
    yours
    frank

  • How to control adobe flash files with sliders and buttons

    Hi,
    I am trying to make a front panel for a vehicle completely designed in flash, and control it through labview.  I can load a flash file into an activex container successfully.  I have followed this thread here http://forums.ni.com/ni/board/message?board.id=170​&message.id=351719  and gotten everything working. 
    But my question is, how can I send data to the flash file from labview?  Some examples of things I need to do:  Interpret a CAN signal and have some text appear on the screen, Make buttons flash, etc.
    I understand how to load the swf, Im just not sure how to communicate with it.  One thing to mention is that the front panel for the vehicle will be fully custom coded.  However in the meantime, I am trying to figure out how to control it from labview.  Like if there is a clock.swf out on the net, how can I change the time from labview?  Is there a way to see what parameters are available for changing?
    Thanks in advance

    Hello,
    What specific Active X framework are you using to embed the container? The thread you referenced mentions Shockwave's Active X API, does this set of Active X functions expose methods for object control? 
    Could you elaborate as to the driver behind a fully Flash based front panel embedded within LabVIEW? Is this application inevitably going to be deployed as thin client software? 
    For interaction with custom flash applications aside from Active X, LabVIEW has an integrated Web Services feature to allow data transfer from custom thin client applications to the LabVIEW environment for processing and instrument control. A detailed discussion of the Web Services feature may be found via the links below:
    LabVIEW Web Services FAQ (Detailed)
    http://zone.ni.com/devzone/cda/tut/p/id/7747
    Web Services in LabVIEW (Overview)
    http://zone.ni.com/devzone/cda/tut/p/id/7350
    Please post back any further questions, or information on the system design.
    Cheers!
    Patrick Corcoran
    Application Engineering Specialist | Control
    National Instruments

  • How to control windows XP machine with ARD (by using a VNC Client on the PC

    I have TightVNC on the Windows machine and I can control it fine with Chicken of the VNC on the Mac; however, I would like to control the Windows machine with ARD like Apple's website states.
    How do I do this?
    thanks
    Matt

    Thanks, I found my problem to be the VNC client I was using on the PC's. I was using TightVNC and while it worked for Chicken, it did not work for ARD. Once I installed RealVNC and configured it everything worked beautifully.
    thanks
    Matt

  • How to control a parallel port with labview

    Hi. I'm trying to control a dc motor with a parallel port using labview. the program has to be able to vary the out put voltage of the computer (0 - 5V) through the parallel port into a circuit which will step up the voltage for the motor. Any help would be greatly appreicated. garreth

    Do you want to output and varying signal from the parallel port pins? If so you can't do it, the port pins are digital and can only be high or low, not inbetween. You can control the individual lines high or low using the In/Out Port vis in Advanced>>Port I/O. For more help on doing this search the message archives (I know I've answered a few) and NI's site, there is some good info on it out there. Try some of these for starters:
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/0989d3d9dafae64e8625680400679736?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/f4146c66990c46388625695f00726581?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/f3c4ee6ee2c23ef386
    25646b007882c8?OpenDocument
    http://www.advmeas.com/goodies/parallelport.html
    I hope this helps get you started
    Brian

  • How do I compress a string with  java.util.zip - not a file ?

    How do I compress a string with java.util.zip?
    Is possible to compress something else except a file?

    Of course, compression works on bytes, not some higher level constructs like Strings or files.
    You can use the ZipOutputStream or DeflaterOutputStream for compression.
    And the javadoc for Deflater even has a code example of compressing a String.
    Edited by: Kayaman on May 22, 2011 5:04 PM

  • How to block an Ipod Touch with a serial number?

    Who can tell me how i can block my Ipod Touch, it was stolen and i did not configured the Icloud application to find it or lock it...Can i block it with the serial number? i live in Colombia and i don´t really know where can i get support to do this..
    thank you

    No. The SN will only help idenify the iPod as yours if it is recovered.
    - Report to police and change the passwords fro all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • HT4061 How can i find my ipad with the serial number

    How can I find my iPad with serial number

    I had FindMyPhone installed and activated on MY Lost iPad (now with a new "owner") and it NEVER worked EVER!
    There is/was no such thing as FindMyiPad...ONLY FindMyPhone. It WAS installed (I dont own an iPhone) AND activated! I suspect that unless you have 4G device it is worthless. Actually I  know this for a fact!
    AND, I knew that the new "Owner" had gone online (despite FindMyPhone telling me otherwise and NEVER locking my iPad) because Dropbox on my laptop suddenly had new photos that were taken by the new "owner".
    I am now of the mind that Apple does not want us to find our lost or stolen gadgets. They make money off  us when we replace them. Do what I am going to do: BUY USED!
    So sorry, I feel your pain.

Maybe you are looking for

  • Dynamically making read only for a field in get_data(CL_EHHSS_INC_BINFA_UI_FRM)

    Hi Experts, I am making read only for a field based on condition in get_data method of class CL_EHHSS_INC_BINFA_UI_FRM. But it is not working. Pls find the code for the same. LOOP AT CT_FIELD_USAGE INTO lw_field WHERE NAME = 'OC_INC_TYPE'.    lw_fiel

  • How do you open a directory ?

    Hello everyone ! My situation : I'm working on a small application that manages all my pictures in a directory. My problem: My application should open a subdirectory, not a file. This is what I got to view a picture : private void openPicture(String

  • Internet access through 9500 on Laptop

    I dont have a wireless card in my laptop and i have Wireless connection at university, cud u plz tell me how can i use internet using Nokia 9500 on Laoptop .

  • Disabled property: enable two Application Module functions

    I am using jdeveloper 11.1.1.5 and problem I am facing is: I want to call two different Application Module functions on one button click. Button is existing on .jspx. For that purpose I have to use Disabled property of button to enable the Applicatio

  • TROUBLE SHOOTING DURING THE CHARGING

    I bought Nokia N1600 one year ago. But now when I charging the Phone for around 5 Min it's getting overheating and the display screen is getting blackish around the surface of display screeen. Waiting for reply Nagesh