How to control Netpay amount for minimum payment case i.e. can't be less than 500

Hi
My user is coming up with a new scenario in relate to netpay amount. The netpay amount can't be less than 500 in any case where total deduction(monthly) is more than the gross(monthly). Let's say an employee's gross salary is Rs. 10,000 and the total deduction amount is 10,500 so in that case the netpay will be 500. The balance deduction amount i.e. Rs. 1000 will be carry fwd to the next month's deduction.
Please guide me to work on the above scenario..
Thanks,
Santosh

You can maintain this fixed amount in the Minimum net pay - Fixed Amount Constant (MNPAM) of table view Payroll Constants (V_T511P).
You can find more detailed information here: http://help.sap.com/saphelp_470/helpdata/EN/0f/4c8c3c042e49d4bcd7ae4dad92225d/content.htm

Similar Messages

Changing: Currency and Amount for Automatic Payment

Hi Folks,
I need to change the value for currency and amount for automatic payment (bseg-pycur and bseg-pyamt) from a user exit from the MIR7. I have found the following exit:
EXIT_SAPLMRMC_002
However didn't see the respective fields to change it.
Another problem is that MIR7 create parked invoices, by this the document isn't in the bseg yet, by this moment the document is in the vbsegk. However I still don't find how to modify this 2 fields that I need from a User Exit.
Hope can help me with this.
Regards,
Gilberto Li

Hi Pava,
MICR - It is nothing but Bank Key BNKA - BANKL
IFSC - I think it is SWIFT code international payments - BNKA- SWIFT
Assign points if useful
~Rajesh

How to control the permission for reports in share folder?

Hi Experts,
In OBIEE 11.1.1.6.0.
I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
How to control the permission for reports in share folder? Thanks for your help.
Note: Dashboard pages have whole sales reports for showing.

Hi User,
1. Give access to the users for all reports.
2. Give No Access to Retail Folder
3. GIve read or full access to dashboard folder.
To set the permission , click on the object/folder bottom left you will find Permission. you set there.
Mark if correct,
fiaz

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

I have a large PDF that I cannot send via email because of its size, 76 MB. How do I shrink this file or convert it to another format so I can email this, less than 20MB? Thanks for your help

I have a large PDF that I cannot send via email because of its size, 76 MB. How do I shrink this file or convert it to another format so I can email this, less than 20MB? Thanks for your help

Open the file in Preview and select "Save as..." from the File menu. Select "Reduce File Size" from the Quartz Filter menu and save. The size probably won't be reduced enough, though. You may have to split the file into several parts and mail them separately. Or upload it to a web server and send the link.

I just got my new iPad and I can't find the hotspot option in settings ? Plz guid me on how to turn my hotspot on in that case if I can't even see the option !!

I just got my new iPad and I can't find the hotspot option in settings ? Plz guid me on how to turn my hotspot on in that case if I can't even see the option !!

You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

How do I reduce a picture to less than 50kb and less than 500 by 500 ratio?

I'm trying to upload pictures to a Web site that requires the size of the picture to be no larger than 50kb, as well as less than 500 by
500.
I've tried cropping and exporting. I can get the aspect to less than
500 by 500, but then the kb size gets larger.
Thanks,
Paul

Paul,
iPhoto won't downsize your photos, since your original would lose much quality if you could do that. Just crop to best suit the aesthetics of the photo. Then to resize for the website, do File > Export > File Export to a Desktop folder. Instead of "full size" select "scale photos no larger than" and type 500 pixels in one of the dimension boxes. (Choose the larger dimension - width for landscape photos, or height for portrait.) iPhoto will automatically constrain the proportions and enter the second amount. Only the exported copies will be resized. Upload those from the Desktop to the website, then trash when finished.
Regards.

Calculation of change amount for cash payments via cash desk, release 602

Does anyone know how to get the change amount to calculate for cash payments via cash desk?
I am only able to enter the amount in each payment type tab and then the payment amount in the summary. The total of the individual payments must add up to the summary payment amount or I get an error.
How then if a customer wants to pay $20 towards their account and they give me $50 in cash, do I get the change of $30 to display?
Any assistance would be appreciated as the old version of cash desk had a "given" and "back" field that no longer exist.

Was not an error, just using the fields the wrong way around. So enter the amount received in the seperate tabs and the amount that is being paid to the account in the summary payment amount field. After you hit post, the change field is filled.
Is another issue though as if pay by multiple payment types, system allows you to give change greater than the amount of cash received. This should not occur as people could use this process to cash for cheques or credit card payments. Especially an issue as cheque could be returned.

How to control authorization about terms of payment in customer document ?

Dear,
I need to control authorization about terms of payment in customer document. the terms of payment fields can only be maintance by some persons, others persons can not be maintance the terms of payment, although they have the FD01 or FD02 athourization.
how can we archieve this programme?

Hi,
Like T.Nishanth says, use tcode SU21 to create your own auth.object. Mantain it with tcode PFCG.
Only an additional point. Use the enhancement SAPMF02D. In the include zxf04u01 (EXIT_SAPMF02D_001), click on 'pattern' and in the pop-up dynpro, try the field authority-check and populate it with the auth.object created before.
After, check it with FD02, XD02 and so on.
I hope this helps you
Regards,
Eduardo

Maximum Amount for a Payment

Dear Expert,
i have set a limit 1,500,000.00 u20AC within the tcode FBZP so in case of the outgoing supplier payment and the paid amount > on what I have defined I got an exception , I think that it is logic.
My question what are the possibilities that we have on this functionality?
Thanks a lot

It is just used as maximum amount limit for a payment method.
For example: for India, the RTGS transactions are only for amount above 100000, so you can define here the minumum amount as 100000 for the payment using RTGS.
Exactly what is your business scenario, which you want to solve.
Regards,
SDNer

How to control "Procurement parameter" for plant stock.

Hi everyone
I have changed Subject and question as below;
Our customer wants to create P.R manually before MRP running for some of reason.
After create Project/WBS/Network/Activity and assign component to Activity, when assign
component to activity, set "Procurement parameter""Requisition + reservation for WBS elemen",
then P.R is automatically created. For project stock it seems OK. However when I try to do
same thing for plant stock, I can choose only "Reservation for network". How to control this part?
Experts, please give me your advice.
Regards,
Satoru
Edited by: Tempra Samurai on Jan 23, 2010 12:37 AM

Hi,
Create a Procurement Key in OPS8 and under Priorities give Priority 1 to Plant stock and 2 to Project Stock.
So attach a material to Activity in CJ20N a reservation will be created without AcctAssgcat Q ,Special Stock Q.
Here in this case you can directly issue goods to project also if unrestricted stock is availabe ,here the system will consider only 281 Now.
After you run MRP ,system will create PRs on the basis of Requirement and availabity but without the reference of WBSE because you are creating PR for Plant stock.
Hope it is clear.
Muzamil

How to calculate the amount for cleared documents.

Hi Experts,
I am working on a program and here i need to display the amount for the cleared document.
I have a scenario where there are two financial document related to a single cleared document.
I can get the amount for financial document from BSAK by passing the BELNR value of the financial document and confirm if it is a clearing document by comparing AUGBL value of BSAK with document number of cleared document.
Actually i am not very clear about the process flow of clearing document.
If anyone can explain me the same.

Hello,
Go through this links it will help full
http://help.sap.com/saphelp_sbo2004c/helpdata/en/fd/25f4c6d8888e40a521972d0be5d68b/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/e5/0783e84acd11d182b90000e829fbfe/frameset.htm

How to Sum the amounts for calculating rates.

Hi,
I have a requirement in Apps 11i (OAB) that I need to code in PL/SQL. I would be calling a procedure in order to complete this task. When an Extract is run, this code gets executed and should return the amount for that person.
I need to calculate sum of all the amounts for each of the months between START date to the END date.
Ex: Amount = Amount + (for each of the months between START and END date) x Rate.
This START and END date would be calculated in the procedure itself.(dynamic).
Once we get the START date and END date, we need to loop thru some records and find person's rate between those START date and END date.
For rate calculation:
15th day of any month is used as the cut off date for rate calculation.
Suppose from 01-JAN-2006 to 15-MAR-2006 Rate is Rs 10 AND
16-MAR-2006 to 01-JUL-2006 rate is Rs 20 AND person died on 01-JUL-2006
Then rate = Rs(3x10) + Rs(3x20) + full month of July Rs.20 (P.S Here person's death needs to evaluated for the whole month) =30 + 60 + 20 = Rs.110
Typically the start date and end date would be in one particular YEAR. And person may have different rates for different amounts as mentioned above.
Let me if you need any more details..Thank You!
Additional Info:
This data comes from 2 tables in OAB Application where it can be joined with a common ID.
One table lets say Coverage table contains the usual columns Eff_start_date, Eff_end_date along with this it has Coverage_start_date and Coverage_end_date (Dates specifying duration of the person enrolled in particular coverage.)
P.S Rate Changes ONLY when the person enrolls in different coverage.
2nd Table lets say Rate table contains the usual columns Eff_start_date, Eff_end_date along with this it has rate_start_date and rate_end_date and RATE(column) for that duration.(may vary depending upon the coverage).
All the records should be between the START and END date, which will be calculated at runtime.
Unable to submit any sample records.:-(
Well, IF I had given the exact requirement, I would have got the solution by this Time!!! Your comments (and solutions) would definitely help me. Thank You
Message was edited by:
user559682

If i understand you correctly it can be possible with :
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL>
SQL> drop table dates;
Table dropped
SQL> create table dates( "start" date, "end" date, "rate" number);
Table created
SQL> insert into dates values( to_date('01.01.2006', 'DD.MM.YYYY'), to_date('30.05.2006', 'DD.MM.YYYY'), 10);
1 row inserted
SQL> insert into dates values( to_date('01.06.2006', 'DD.MM.YYYY'), to_date('15.09.2006', 'DD.MM.YYYY'), 15);
1 row inserted
SQL> insert into dates values( to_date('16.09.2006', 'DD.MM.YYYY'), to_date('31.12.2006', 'DD.MM.YYYY'), 20);
1 row inserted
SQL> SELECT * FROM dates;
start       end               rate
01.01.2006 30.05.2006          10
01.06.2006 15.09.2006          15
16.09.2006 31.12.2006          20
SQL> SELECT t.i, d."rate"
2    FROM (SELECT add_months(to_date('01.01.2006', 'DD.MM.YYYY') /* start*/, LEVEL - 1) i
3            FROM dual
4          CONNECT BY LEVEL <= 12) t
5        ,dates d
6   WHERE t.i BETWEEN d."start" AND d."end";
I                 rate
01.01.2006          10
01.02.2006          10
01.03.2006          10
01.04.2006          10
01.05.2006          10
01.06.2006          15
01.07.2006          15
01.08.2006          15
01.09.2006          15
01.10.2006          20
01.11.2006          20
01.12.2006          20
12 rows selected
SQL> SELECT SUM(d."rate") rs
2    FROM (SELECT add_months(to_date('01.01.2006', 'DD.MM.YYYY') /* start*/, LEVEL - 1) i
3            FROM dual
4          CONNECT BY LEVEL <= 1 +
5                     extract(MONTH FROM to_date('10.10.2006', 'DD.MM.YYYY') /*death*/) -
6                     extract(MONTH FROM to_date('01.01.2006', 'DD.MM.YYYY') /* start*/)
7          ) t
8        ,dates d
9   WHERE t.i BETWEEN d."start" AND d."end";
        RS
       130
SQL>

How to Create XML output for EFT payments.....?

I am new to creating eText templates. My Understanding is to get XML output then build a template based on the XML output. Right or wrong I am not totally sure. Either way, here is what I need to accomplish and I am not sure where to start.
(We are in R12....)
Select EFT payments and create EFT output to send to the bank. I am looking for some guidence. Is there a generic payment program I can relate to an eft payment bank to generate the xml output? Is there a template already built for EFT payments? Does anyone out there have a solution that they are willing to share? Any guidence would be greatly appreciated.

Figured this out on our own

I was double billed for CC on 12/30/14.. Adobe less than helpful

I signed up for the creative cloud membership on 12/30, but there was a problem with your website when I tried processing my payment, and it told me to try again in a few minutes. So I did, and it went through. I then got a call from my bank with fraud alert because there were 2 charges for $119.88 that ended up going through. Because I told my bank that I didn't authorized 2 charges, they canceled my card and I'm having to deal with getting a replacement - which is an inconvenience as it is.. so I called you guys about it the next day and the woman who answered told me I would need to call back after a couple days because she didn't have the ability to credit back the duplicate charge (that's NOT 'great' service) ... so today I got around to trying to contact you to find out your phone lines are closed, so I guess chatting is my only option.. so I tried that, and their chat service doesn't give me any update as to how long it will be before someone comes on to help me. Judging by all the other posts about this issue, it would appear that Adobe is intentionally double billing customers and making it very difficult to have the issue resolved.
case# 0214678362
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
You are now chatting with Vikram V.
Vikram V: Hello! Welcome to Adobe Customer Service.
Vikram V: Hi Mark
Vikram V: Please allow me a moment while I review your issue.
mark: I don't have much time left.. your guys chat service is terrible.. .it didn't give me any notice of how long I might be waiting for a response, or where I was in queue, or anything. I was starting to think you guys were closed. This is very frustrating.
Vikram V: I understand your frustration, I'm sorry for the inconvenience caused to you.
Vikram V: I am sorry to inform you that the applications are down currently hence we are unable to check the information, I request you to please contact us back after few hours so that we will be able to assist you better.
Vikram V: We are sorry but Adobe.com and related services are experiencing system maintenance. Our apologies for the inconvenience and request you to check back after 6-7 hours as our IT/Web team is working on this.
mark: holy crap... are you freaking kidding me?
mark: No - that's not acceptable. I want a supervisor or manager to own this and contact me back within 48 hours letting me know that the double charge has been adjusted. You guys are thieves. this is ridiculous
mark: I have to go, but I will expect a call back on Monday with confirmation of credit, from a Supervisor or Manager.
Yeah.. .that's world-class customer service. No notice of how long it will take for someone to assist me, or anything. I would expect better service from a company like Adobe.

Sorry, This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How to control Netpay amount for minimum payment case i.e. can't be less than 500

Similar Messages

Maybe you are looking for