How to control Object States of different objects with single button?

I have a set of Images, stacked one on the other. I have selected all of them & created Object States for them. I also have a set of Text Objects, each containing a description of the images. These text objects are also stacked on top of each other & I've created object states for them too. I have two buttons which go to previous state & next state. When I do a mouse release operation on these buttons, only my images are moving from state to state.
My question is how do I control the states of these different types of objects (images & type) so that they change states in sync with each other - I want to have an image 1 with its description, then image 2 with its description & so on. Thanks in advance.

You just group your description with images

Similar Messages

  • How to recover a state of  one objects threads by other object

    hi everyone
    how to recover a state of one object's threads by other object..
    i am creating a object in that i have 10 thread..... i have started it then i have closed that object ...then i am creating a new object for the same class ...i need to stop those thread which i have started earlier

    saiyath_babuhussain wrote:
    hi everyone
    how to recover a state of one object's threads by other object..Objects don't own threads so that's hard to understand
    >
    i am creating a object in that i have 10 thread..... i have started it then i have closed that object ...then i am creating a new object for the same class ...i need to stop those thread which i have started earlierWe don't so much stop threads as inform them politely that their services are no longer required. When you have a long running thread it's almost always a loop, often with a wait or sleep which causes it to wait until it's activitty is needed.
    So if you want to be able to wind up a thread from another thread then you put a boolean flag in which can break the loop. The other thread then changes that flag and calls interupt() on the thread it's trying to stop. Interupt will kick the thread out of wait or sleep if that's where it is, causing an InterruptedException. On discovering that the flag indicates it should stop, or on catching an InterruptedException the thread should then clean up and finish.
    The master thread can call join on the thread it's stopping if it needs to wait for it to terminate.

  • How to apply same Animation to different Objects?

    Hello,
    So, as the question stated, I am trying to animate multiple objects in the scene with the same animation.
    For example, I have a SQUARE and a CIRCLE in the scene, both of them in different layers. I want them to both scale from 0% to 120%, then back to 90%, and finally to 100%. What I do is going in the SQUARE "scale" section and add keyframes to the time I want each elements (percentage) to be at. When done, the SQUARE works perfectly (scaling from 0>120>90>100 percent). Then, I copy and paste the keyframes I use with the SQUARE to the CIRCLE, which gives me the same animation as the SQUARE (0>120>90>100 percent). But when I want to make changes to both of them, I need to change each keyframes in each objects (SQUARE and CIRCLE) one by one...
    Having only two objects in the scene isn't bad, but I have around 30 objects that needs to be animated exactly the same... so changing them one by one is pretty time-consuming.
    So, the question is, is there a way where I can easily apply a type of animation (scaling 0>120>90>100, and adjustable afterwards) to different objects (SQUARE, CIRCLE, etc.) in my composition without doing it one by one?
    This might be a stupid question, but I'm new with After Effects so this is quite complicated for me...
    Thank you,
    Pascal

    Several ways, parenting and expressions.
    Parenting: Create a small solid or a null object that will be 'controlling' the other layers. Parent the CIRCLE and the SQUARE to it (to achive this, in the Parent column of the Composition Panel, select the name of the controlling layer or directly pickwhip the layer).
    Once done, when you scale/rotate/move the controlling layer the parented layers transform accordingly. It doesnt affect opacity.
    Be aware that parenting modifies the values you see in the Composition panel for each of these properties (scale/rotation/position) for each of the parented layers. This is because the transform properties are now expressed in the coordinate system of the parent layer, and not in the one of the comp. Modifying the transform properties of the parented layers tranform these layers relatively to the controlling one.
    Expressions: You can enter expressions in the transform properties of your layers. For instance, if your controlling layer is named 'controller', alt+click the stopwatch of the property 'Scale' of the SQUARE for instance and enter this in the expression box:
    thisComp.layer("controller").transform.scale;
    Now when you scale the controller, the SQUARE scales accordingly. It works for any property.
    Note that since the expression doesnt refer to the property's own keyframes, those keys are now ignored. To refer to the property's own key value in an expression, use simply 'value'. For instance:
    s = thisComp.layer("controller").transform.scale/100;
    [s[0]*value[0], s[1]*value[1]];
    The possibilities are pretty much infinite.

  • Objects states in an object state

    I am finding it impossible to insert an object state into a state of another object state...
    So that in object state 1 there is another series of object states (B) that would disappear once object state 1 goes to the next state...
    the end result I am trying to achieve is to have a question in an object state that the user can touch to show the answer...
    example: state 1 appears a question...when you touch it the answer appears, in state 2 a different question/answer etc...

    @hooplife – there are two solutions:
    1. InDesign CS5: copy or cut the MSO to the clipboard, paste after selecting the one and only insertion point in the empty text frame with your text tool (= double click the text frame with the selection tool). You can change position of the inserted MSO by using the anchored object options.
    2. InDesign CS5.5 and above:
    if you select an object you may have noticed that there is a new control on every object: the small blue square. Hover your mouse pointer over the square and just follow the instructions of the tool tip.
    In case you have disabled the tool tips function:
    Simply drag the little blue square to the one and only insertion point in the empty text frame.
    Use shift + drag to get the same result like pasting the MSO to the insertion point or:
    use alt + drag to immediately getting the options for anchored objects.
    Uwe

  • HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

    Dear All,
    I want to contol on creation of Sales order with reference to earlier SO?  While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
    I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
    Nikhil

    Nikhil Deshpande,
          If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
    Thanks,
    Mariano.

  • How to stop While Loop in Event Structure with same button?

    Hello,
    I have a problem. I want to use one control to activate an event in a event structure, and the same control to terminate a while loop in that event.
    It is possible to use 2 controls to do this, but I need it to be only one.
    Thank you  
    Message Edited by Heinen on 02-19-2009 06:16 AM
    Message Edited by Heinen on 02-19-2009 06:20 AM
    The Enrichment Center is required to remind you that you will be baked, and then there will be cake.
    Solved!
    Go to Solution.

    Hello,
    I have a bit different problem.
    I have a tab control, with several buttons on different pages.
    In the current situation, we can talk about two pages, where one page ("Settings") in the Image, has a START and EXIT button, while second page ("Wait") has an EXIT button.
    In a while loop, I have event structure, which handles events of the START and EXIT buttons of the Settings page. This is fine. But I also want to control the Exit button of the Wait page.
    The control works like this:
    When I click on Start in the Settings page, the front panel shows Wait page and attempts to connect to a datasocket server on the remote computer. If the user wants to stop this process, he can click on Exit on Wait page too. But, this doesn't give any immediate effect. On the even of Start button, the front panel is not locked, so the user can actually click the Exit button on the next page when it's visible. But it's of no immediate effect. Means, what the LabVIEW does is, finishes the execution of event in Start button's click, and while this executes, it doesn't consider the Exit button's refreshed value (shown in Red circle in the block diagram).
    Simple question: Is there any way to check the updated (latest/live) value of a control during some event's execution? Or if I write an Event "Value Changed" for the Exit button and pass it to some variable. Is it the only solution?
    Thanks ahead.
    Vaibhav
    Attachments:
    terminate event_diagram.jpg ‏200 KB
    terminate event_front_1.jpg ‏63 KB
    terminate event_front_2.jpg ‏63 KB

  • How to aggregate a number of different objects in one

    Hi guys,
    My problem is the following:
    I am implementing a neural network for which i have a neuron interface. This neuron interface is then implemented by different types of neurons. Now i would like to aggregate these neurons in one object which will make the final decision. New types of neurons are added quite frequently so i would like to have something that it is extensible. e.g an arraylist that i can keep adding new neurons to it. But i cannot do this because each neuron is a different type of object. Any ideas how can i do this? If you need any clarifications please ask. Any idea is welcome, even if it will involve major redesign.
    Kind regards,
    Charalambos

    Charalambos wrote:
    hello tom,
    thanks for your swift reply! now to your questions, my answers are in blue:
    What are the basic characteristics that you want to include about a Neuron?
    {color:#0000ff}Each neuron has 3 types of weights and a train method to which tarining data is passed to sequentially. Train then produces a result (one of possible three) and depending on the result uses the appropriate weight (one of the three). Then, i would like in the agregator neuron to compare the result of the neuron to the actual result and recalculate the specific weight.{color}the weight sounds like an attribute to me. the train method, however, is a good candidate for an interface.
    How do neurons interact?
    {color:#0000ff}Basically the only place they would interact will be in the aggregator object which will get the results and depending on there weights will pick the result with higher overall weight.{color}write a neuron comparator to make things easy for your aggregator.
    Are relationships 1 way (tree structure) or bi-directional (map structure)
    {color:#0000ff}It's a two level tree structure network{color}
    I hope my replies make sense to you.... If you have any ideas or more questions, please let me know...sounds like it could be a good problem. standard neural net stuff?
    %

  • How to control partner function through security objects ??

    Hi, theres any way to control witch Partner function are avalilable to assign in support messages ??
    Theres any security object to control that ??
    I have configured rules for automatic determintation, but in certains cases i need to assign manually.
    I need to control this asignation Partner function
    Any ideas ?? CRM_ORD_OP ??
    Best Regards

    I got it fixed my self.
    here is the solution.
    in user exit :EXIT_SAPMM06E_012.
    call below FM: MM_CALL_UPDATE_PARTNERS
    Trick is pass the partner values the one you wanted to below table: x_mmpa and xuekpa.
    you can calculate partner records from wyt3 table depends on your logic/requirement.
    CALL FUNCTION 'MM_CALL_UPDATE_PARTNERS'
         EXPORTING
           ebeln       = wa_ebeln
           bstyp       = 'F'
    *     knuma       = wa_knuma
           application = 'P'
         TABLES
           x_mmpa      = it_mmpa1
           y_mmpa      = it_mmpa2
           xuekpa      = it_uekpa1
           yuekpa      = it_uekpa2
           i_mmpa      = it_mmpa3
           u_mmpa      = it_mmpa4
           d_mmpa      = it_mmpa5.
    Thanks,
    Mahesh

  • How to control volume in multi-room setup, with different tunes in each room?

    Hi,
    I'm thinking of replacing my Squeezebox / SqueezeServer setup and have therefore bought two Apple TV's to experiment with.
    I have a Windows Home Server on which I've installed iTunes 10.5 yesterday and I can (through RDC) use it to share music to the Apple TVs and even control the volume.
    However, playing music this way is by no means what I was hoping for - I want to be able to play DIFFERENT tunes in DIFFERENT rooms.
    Yes, that is possible through the use of my iPhone, using Remote to choose the iTunes server (the real server in this case).
    But, and here's my issue - when playing different tunes in different rooms (using the Remote app connected to my iTunes server), how do I control the VOLUME for each Apple TV? Or should I play the different tunes for different rooms in a different way?
    Kind regards
    Niclas

    Thanks!
    Yes I hope they develop either the Apple TV or Airport express or iTunes or all into a complete multi room music listening experience just like the Squeezebox / Sonos product range. They certainly have the possibility and they did try. Except they didn't make it all the way. It's fine to be able to play the same music in all rooms, but better still would be if I could play different music in different rooms AND change the volume without the need of an additional display or anything. The nice thing would be to have an airport express connected to a small amp with in-ceiling mounted speakers in e.g. the bathroom, the kids room etc. And the kids then control their own music, the bathroom has some rain forest sounds, but when I enter it, I change to the party music I was listening to in the living room, so as to get in the mood for tonights party... And when I'm ready in the bathroom, I switch back to the rain forest sound and one of the kids are so annoyed with the pumping bass from his brothers room, that he syncs to the same music, all the while I go into the kitchen and sync the kitchen with the living room and turn up the knob another notch or two.
    This is the way my house works now and I can really see it work like that with Apples products, except they haven't done it all the way yet then. Too bad - I have only used the Apple TV's two days and started to like them.

  • How to read multiple files of different name using single file adapter

    There are two inbound locations inbound1 and inbound2 , and the files structure present in these two inbound locations are same but the files start with different names example
    (1)files in inbound1 starts with file1,file2...
    (2)files in inbound2 starts with abc1,abc2...
    by using same file adapter with read option how can i read both files....

    Hi K.A.N.N.,
    You can define multiple directories using the above link in 11g and poll for the file as \*.*.
    Alternatively you can use the Synchronous Read and specify the file name at runtime.
    You can also use Pick activity to define multiple branches each with a File Adapter to read from a specified location with specified file name. Although it would contain multiple Adapter Definitions at Development-time, only one of the Adapters will execute at Run-Time.
    Regards,
    Neeraj Sehgal

  • How to control what VoiceOver says when clicking a radio button in Safari?

    Hello-
    I am developing a web page that I want to work in Safari & VoiceOver. Does anyone know how I can:
    1) control what VO says when it is hovering over a radio button (ideally some alt text or title attribute)
    2) control what VO says when I click a radio button in Safari (right now, it seems to say 'Group').
    I have tried to put the radio buttons in a fieldset, tried tons of attributes in the input tag (including alt, title, desc, description), but nothing seems to change.
    Here is a URL where you can hear what I'm talking about: http://postcalc.usps.gov/
    Turn on VoiceOver (try Cmd+F5), pull up the URL and hover over the 'letter' or 'large envelope' radio buttons, then click one of them. It says 'group'. I'd like it to say 'letter option selected' or something.
    Thanks for any & all help!
    Seth
    PS: I do know about the <label> tag. I've tried surrounding my <input> tag with a label and using <label for="someID">, but it doesn't seem to help.

    Thank you for the suggestion...it does work and fires the event, but it is still not selecting the current record when I try to perform an Update or Delete.
    I had to modify your code a bit in order for it work in JDev 10...used the JUCtrlValueBindingRef instead of the FacesCtrlHierNodeBinding.
    Here is what my af:table tag looks like:
    <af:table value="#{bindings.FeesView1.collectionModel}"
    var="row" rows="#{bindings.Fees001View1.rangeSize}"
    first="#{bindings.FeesView1.rangeStart}"
    emptyText="#{bindings.FeesView1.viewable ? \'No rows yet.\' : \'Access Denied.\'}"
    selectionListener="#{backing_viewFees.tableSelectOne1_attributeChangeListener}"
    binding="#{backing_viewFees.table1}" id="table1">
    If I put back my 2 original attributes, then my Delete and Updates work.
    selectionState="#{bindings.FeesView1.collectionModel.selectedRow}"
    selectionListener="#{bindings.FeesView1.collectionModel.makeCurrent}"
    Here is my code in the backing bean:
    public void tableSelectOne1_attributeChangeListener(SelectionEvent selectionEvent) {
    JUCtrlValueBindingRef binding = (JUCtrlValueBindingRef)this.getTable1().getSelectedRowData();
    if (binding != null) {
    Row currentRow = binding.getRow();
    if (currentRow != null) {
    System.out.println(currentRow.getAttribute("CurrentRecordInd")); // this does print my selected value!!!!
    }

  • How do i back up 2 different devices with the same ID but different content, without losing any content?

    I have 2 iPads but just one ID. I use the iPad 2 and my daughter uses the mini. Both have different contents, as her mini contains a lot of videos that she's taken. Niw, I just bought an iPad Air and want to essentially transfer my iPad 2 contents there and also transfer my daughter's mini contents to that iPad 2. If I back up both to the same computer, will I have access to both sets of content and transfer the data to whichever device as I see fit? I just want to make sure so I don't lose any of her content (especially).
    Thanks!

    Using iTunes on a computer, be sure to set the backup(s) to be stored locally and not the iCloud for efficiency's sake. If all devices belong to the same AppleID, each one will store its backup on a separate file, and if appropriate, you can choose any for a restore as needed. As shown in Diavonex pic, the backups are listed in Preferences / Devices. Hover the cursor over each and a popup will appear detailing which device it belongs to. And you can keep, if needed, more than one backup of a device: control-click on the backup to preserve and choose Archive from the menu (Older backups get overwritten otherwise).

  • How to control the speed of nested movie with mouse

    I have a movie nested inside another movie with pictures that
    scroll horizontally across the screen. I would like the user to be
    able to control the speed and direction of the pictures by moving
    their mouse. Can anyone give me some insight on where to look to
    find out how to do this?
    If this can't be done then perhaps add controls on the screen
    to stop / play / speed up / slow down the horizontal scrolling
    pictures

    it can be done. search for a scrolling movieclip tutorial
    using google or at flashkit.com

  • HT2534 How can i download from two different store with the same account?

    I live in both countries but my credit card is registered in a french bank, therefore it is not recognised by the Aussie store on itunes. There are apps or music i want to get form the Aussie store as well as music and other apps from the french one...
    Is it possible to have two stores under the same account????? I wish apple could fix this, which could result in more spending as you can buy from different store!

    Wait 90 days
    Why would you start a new account?  Why not just correct the original account?

  • How to use acquired values for different treatments with NI 9188 cDAQ

    hi guys, I am trying to use NI DAQ 9188 chasis with 9214 temperature measurement module. I wired 3 modules to the module and split signals. But I am not sure that I can these values into functions vis easily. I am trying to convert them into 1D array, but when I converted to the 1D array I can not see the values and use separetely from each other. For example, I want to multiply just the first value taken from 1st thermocouple. how could I do this. Additionally, the signals in the waveform chart 1 is not smooth. what is the reason of this? thanks in advance.
    Egemen
    Solved!
    Go to Solution.
    Attachments:
    DAQ_v1.vi ‏82 KB

    Hi newbieeng,
    It sounds like what you want to use is the Index Array function. You should use the Convert From Dynamic Data function on the signal coming from the DAQ Assistant and then use the Index Array function to access the apropriate data on which you would like to operate. Please refer to the help documentation for more information on the Index Array function. As far as smoothening the signal, try adjusting the properties of the graph, such as Autoscale X and some others in the Properties window. 
    Regards,
    James D.
    Applications Engineer
    National Instruments

Maybe you are looking for