How to control screen ML81N

Hi expert,
-In ML81n, I know when we edit one Service Entry (SE) and move to the other SE within the PO, SAP system will not save the data.
-But when we move from one SE from one PO to the other PO, SAP system will as for save before proceed.
-So, my question is, how I can control ML81N and when user move from one SE to the other SE within the same PO, but system will ask the user to save.
-I have tried User Exit EXIT_SAPLMLSR_020 and EXIT_SAPLMLSR_021, but seem not working.
-Kindly let me know if anyone of you come across this situation.
-Many thanks
Best regards,
Lee

Thanks Ben, but if that had worked, I would not have had an issue to post.
Not sure why the image links for my original post are broken. I'm reposting the visual aids here.
Thanks for any advice anyone can give. I'm really banging my head against a wall here.

Similar Messages

  • How to delete the populated data in the control screen of XK02 transaction

    In the vendor master ( XK01/2/3)  "Control screen " we have some user defined fields with data already populated into those fields. Now, the user is asking to delete the data which is already populated for a particular purchaging Organization. How to do that.
    Ur help wil be highly appreciated.

    Hello,
    If the data is like after every C5* or C6* there is an underscroll sign (_), then below code will work in start routine:
    Data: wa_source_package like line of source_package,
              itab_sp type standard table of tys_SC_1,
              a(6) type c,
              b(10) type c.
    loop at source_package into wa_source_package.
       split wa_source_package at '_' into a and b.
       if strlen( a ) = 7.
          append wa_source_package to itab_sp.
       endif.
    endloop.
    refresh source_package.
    source_package = itab_sp.
    Regards,
    Shashank

  • How to hide or supress availability control screen in VA01

    Hi,
    I want to hide Availability Control Screen in VA01. Can you please help me how can i supress that screen.
    Regards
    Malik

    Hi Nabheet ,
    disabling the Button wont solve the problem , System automatically do availability check based on the stock and scheduled delivery date , if no sufficient stock then system will  propose new schedule line dates....
    so disabling the Button wont stop doing all these checks........it needs to be done thru config/E Spot which will skip all these validations...
    regards
    Prabhu

  • How to make the Page UP and down work on a table control screen?

    Dear all,
    Can some one suggest how to make the table control screen work with Page Up and Page down controls.
    when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
    Regard,
    Vj

    Take this code as a referance:
    Sample code for vertical scrolling in PAI processing will look like this:
    MODULE user_command_XXXX INPUT. (XXXX is screen no.)
      CASE ok_code.
        WHEN 'P--'.
          CLEAR ok_code.
          PERFORM paging USING 'P--'.
        WHEN 'P-'.
          CLEAR ok_code.
          PERFORM paging USING 'P-'.
        WHEN 'P+'.
          CLEAR ok_code.
          PERFORM paging USING 'P+'.
        WHEN 'P++'.
          CLEAR ok_code.
          PERFORM paging USING 'P++'.
    *&      Form  PAGING
    *       Form to do scrolling for screen XXXX
    *      -->CODE   OKCODE value (P--, P-, P+, P++ )
    FORM paging USING code.
      DATA: i TYPE i,
            j TYPE i.
      CASE code.
        WHEN 'P--'. <table control name>-top_line = 1.
        WHEN 'P-'.
          <table control name>-top_line =
                  <table control name>-top_line - line_count.
          IF <table control name>-top_line LE 0.
            <table control name>-top_line = 1.
          ENDIF.
        WHEN 'P+'.
          i = <table control name>-top_line + line_count.
          j = <table control name>-lines - line_count + 1.
          IF j LE 0. j = 1. ENDIF.
          IF i LE j.
            <table control name>-top_line = i.
          ELSE.
            <table control name>-top_line = j.
          ENDIF.
        WHEN 'P++'.
          <table control name>-top_line =
                 <table control name>-lines - line_count + 1.
          IF <table control name>-top_line LE 0.
            <table control name>-top_line = 1.
          ENDIF.
      ENDCASE.
    ENDFORM.                               " PAGING
    Regards,
    Ravi

  • How to control the screen in LSWM

    Hi ,
    I am creating a LSMW for tcode ABAON . For this tcode there will be a POP UP screen populate once for company code to key in.But next time when we enter this tcode It won't  call this pop up for input.
    If I run the file which is having company code for alll fields or If I run second time it will give error screen not found.
    How to control this in screen level.
    I don't want go for parmater id in config.
    Pls advice.

    solved by self.

  • HOW TO MAKE THE CONTENT OF THE TABLE PRINT IN A TABLE CONTROL SCREEN?

    Can any one tell me how to make the content of the table control print in a table control screen!!?
    Please help!!
    I have to make the contents of a table in the table control screen print ? any idea
    Regards,
    Vj

    Please refer to Demo Program,
    DEMO_DYNPRO_TABCONT_LOOP
    Its very clear.
    Shreekant

  • How to create screen resolution in bdc table control

    hi gurus
    can anyone suggest me
    how to create screen resolution in bdc table control
    thanks&regards
    mark.

    Hi ,
    Using CTU_PARAMS table for screen resolution .
    For this sample code.
    This is for Transation  FB60.
    report ZZFB60
           no standard page heading line-size 255.
    tables t100.
    PARAMETERS : p_file1  like  rlgrap-filename,
                 p_doctyp like  RF05A-BUSCS,
                 p_invdat like  INVFO-BLDAT,
                 p_posdat like  INVFO-BUDAT.
    CONSTANTS  :  C_TRANS_FB60(4) VALUE 'FB60'.
    *Parameter string for runtime of CALL TRANSACTION
    data : l_option type ctu_params,
           l_subrc type sysubrc.
    DATA :  l_mstring(150).
    data      accnt type char17.
    data       : day   type char2,
                 month type char2,
                 year  type char4,
                 date1 type char10,
                 date2 type char10.
    data      :  cnt(2) TYPE n,
                 cnt1 type i,
                 fld(25) TYPE c.
    data : begin of excel occurs 0,
            fieldname(255) type c,
           end of excel.
    DATA:BEGIN OF it_mess OCCURS 0,
             msgtyp(5),
             lms(200),
              msgv1(50),
         END OF it_mess.
    data: begin of t_record occurs 0,
             BUKRS(004),
            ACCNT(017),
            XBLNR(016),
            WRBTR1(016),
            WAERS(005),
            SECCO(004) ,
            SGTXT(050),
            HKONT(010),
            WRBTR2(017),
            MWSKZ(002),
            GSBER(004),
            KOSTL(010),
         end of t_record.
    *Internal Table for Header Data
    DATA :  BEGIN OF t_head OCCURS 0,
            BUKRS(004),      "Company Code
            ACCNT(017),      "Account or Vendor
            XBLNR(016),      "Reference
            WRBTR1(017),     "Amount in document currency
            WAERS(005),      "Currency
            SECCO(004),      "Section Code
            SGTXT(050),      "Text
            END OF t_head.
    *Internal table for Item Data
    DATA :  BEGIN OF t_item OCCURS 0,
            ACCNT(017),      "Account
            HKONT(010),     "GL Account
            WRBTR2(017),    "Line item Amount in document currency
            MWSKZ(002),     "Tax Code
            GSBER(004),     " Business Area
            KOSTL(010),     "Cost centre
            END OF t_item.
    DATA: IT_BDCDATA      LIKE  BDCDATA OCCURS 0 WITH HEADER LINE,
          IT_BDC_MESSAGES LIKE  BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    *include bdcrecx1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
      PERFORM  file_selection.
      PERFORM  data_upload.
      PERFORM  table_control.
    start-of-selection.
    l_option-defsize = 'X'.
    l_option-dismode = 'A'.
    l_option-updmode = 'S'.
    day = p_invdat+6(2).
    month = p_invdat+4(2).
    year =  p_invdat+0(4).
    concatenate day month year into date1 SEPARATED BY '.'.
    day = p_posdat+6(2).
    month = p_posdat+4(2).
    year =  p_posdat+0(4).
    concatenate day month year into date2 SEPARATED BY '.'.
    *perform open_group.
    loop at t_head.
    CLEAR    IT_BDCDATA.
    REFRESH  IT_BDCDATA.
    perform bdc_dynpro      using   'SAPLACHD'         '1000'.
    perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
    perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
    perform bdc_dynpro      using   'SAPMF05A'          '1100'.
    perform bdc_field       using   'BDC_OKCODE'        '/00'.
    perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
    perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
    perform bdc_field       using   'INVFO-BLDAT'       date1.
    perform bdc_field       using   'INVFO-BUDAT'       date2.
    perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
    perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
    perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
    perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
    perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
    cnt = 1.
    cnt1 = 1.
    loop at t_item where accnt = t_head-accnt.
    *if cnt > 4.
    *cnt = 4.
    *endif.
    if cnt1 gt 1.
    CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
    perform bdc_field      using   fld                   'X'.
    perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    perform bdc_field       using 'BDC_OKCODE'        '=0005'.
    endif.
    perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    perform bdc_field       using   'BDC_OKCODE'        '/00'.
    CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-hkont.
    CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
    perform bdc_field  using       fld                t_item-wrbtr2.
    CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-mwskz.
    CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-gsber.
    CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-kostl.
    perform bdc_field      using  'BDC_CURSOR'  fld.
    *CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
    *perform bdc_field      using   fld                   'X'.
    cnt1 = cnt1 + 1.
    *cnt = cnt + 1.
    *if cnt > 1.
    *perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    *perform bdc_field       using 'BDC_OKCODE'        '=0005'.
    **perform bdc_field       using 'BDC_OKCODE'        '=0006'.
    *endif.
    endloop.
    perform bdc_dynpro      using 'SAPMF05A' '1100'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BS'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    *perform bdc_transaction using 'FB60'.
    CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA  options from l_option
                                 MESSAGES INTO IT_BDC_MESSAGES.
    perform error.
    perform errordownload.
    endloop.
    *perform close_group.
    *Form  data_upload
    FORM data_upload .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME              =  p_file1
       FILETYPE              = 'DAT'
      TABLES
        DATA_TAB             =  t_record.
    ENDFORM.                    " data_upload
    *Form  file_selection
    FORM file_selection .
    CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  =  syst-cprog
          dynpro_number =  syst-dynnr
          field_name    = 'p_file1'
        IMPORTING
          file_name     =  p_file1.
    ENDFORM.                    " file_selection
    Form  BDC_DYNPRO
    FORM BDC_DYNPRO using program dynpro.
      CLEAR IT_BDCDATA.
      IT_BDCDATA-PROGRAM = PROGRAM.
      IT_BDCDATA-DYNPRO = DYNPRO.
      IT_BDCDATA-DYNBEGIN = 'X'.
      APPEND  IT_BDCDATA.
    endform.
    *Form  BDC_FIELD
    FORM  bdc_field using fnam fval.
      CLEAR  IT_BDCDATA.
      IT_BDCDATA-FNAM = FNAM.
      IT_BDCDATA-FVAL = FVAL.
      APPEND  IT_BDCDATA.
    ENDFORM.
    Table Control
    FORM table_control .
      LOOP AT t_record.
        ON CHANGE OF t_record-accnt.
          MOVE-CORRESPONDING t_record TO t_head.
          APPEND t_head.
        ENDON.
      loop at t_head.
             t_item-accnt   =  t_head-accnt.
             t_item-hkont   =  t_record-hkont.
             t_item-wrbtr2  =  t_record-wrbtr2 .
             t_item-mwskz   =  t_record-mwskz .
             t_item-gsber   =  t_record-gsber .
             t_item-kostl   =  t_record-kostl.
        APPEND t_item.
    endloop.
         If t_record-level = 'H'.
             t_head-bukrs   =  t_record-text1.
             t_head-accnt   =  t_record-text2.
             t_head-xblnr   =  t_record-text3.
             t_head-wrbtr1  =  t_record-text4.
             t_head-waers   =  t_record-text5.
             t_head-secco   =  t_record-text6.
             t_head-sgtxt   =  t_record-text7.
          APPEND t_head.
         else.
            t_item-accnt   =  t_head-accnt.
            t_item-hkont   =  t_record-text1.
            t_item-wrbtr2  =  t_record-text2.
            t_item-mwskz   =  t_record-text3.
            t_item-gsber   =  t_record-text4.
            t_item-kostl   =  t_record-text5.
         APPEND t_item.
         endif.
      ENDLOOP.
    ENDFORM.
    FORM error .
      LOOP AT IT_BDC_MESSAGES.
        IF IT_BDC_MESSAGES-msgtyp = 'E'.
       SELECT single  * FROM t100  WHERE
                                    sprsl = it_BDC_MESSAGES-msgspra
                                    AND   arbgb = IT_BDC_MESSAGES-msgid
                                    AND   msgnr = IT_BDC_MESSAGES-msgnr.
          IF sy-subrc = 0.
            l_mstring = t100-text.
            IF l_mstring CS '&1'.
              REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
              REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
              REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
              REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
            ELSE.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
            ENDIF.
            CONDENSE l_mstring.
            it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
            APPEND it_mess.
          ELSE.
            it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
            APPEND it_mess.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.
    form errordownload.
    *down the internal table to excel file.
    call function 'EXCEL_OLE_STANDARD_DAT'
               EXPORTING
                    file_name                 = 'c:/Error.xls'
               TABLES
                    data_tab                  = it_mess
                    fieldnames                = excel
               EXCEPTIONS
                    file_not_exist            = 1
                    filename_expected         = 2
                    communication_error       = 3
                    ole_object_method_error   = 4
                    ole_object_property_error = 5
                    invalid_filename          = 6
                    invalid_pivot_fields      = 7
                    download_problem          = 8
                    others                    = 9.
    endform.
    Reward if useful
    Regards,
    Narasimha
    Edited by: narasimha marella on May 13, 2008 12:12 PM

  • HOW TO MAKE THE FIELDS ON TABLE CONTROL SCREEN FIXED!!

    Dear all,
    Can you please tell me as to how to make the fields on the table control screen fixed (not respond to the scroll bar) i.e. simillar to MC88 screen , the first two fields are fixed and don't respond to the scroll.
    Please Help!!!!
    Vj

    Hi
    In TC, goto attributes and set 'Fixed columns' as 2. This will fix the first 2 columns.
    Regards
    Navneet

  • How do i control my music from the lock and control screen?

    I Dont know if theres a setting i have to change, but i cant control my music from the control screen nor can i control it on the lock screen while the music is already playing. Is this a settings problem or is it just not working for my iphone 5?

    I'm having this same issue on the 4s.

  • How to control a MacBook Pro remotely with ARD?

    I have ARD set up and installed, but I'm not sure how to set up a connection with the MBP so I can control and observe the MBP with ARD.
    Looking for a easy tutorial for a beginner in ARD.

    Hi apple is awesome,
    Just to check, you have one computer, with ARD installed, and your trying to use that computer to control your "BMP"?
    If so:
    On your BMP, you would want to setup sharing:
    go to the white menu bar at the top of the screen
    click on the Apple Menu
    chose "System Preferences..."
    when System Preferences opens, click the "Show All" button
    click on the "Sharing" icon
    if the lock in the bottom left corner of the window is locked, then click on it to unlock sharing
    At the top of the window there will be a field labeled "Computer Name:" make sure your computer has a name you'll recognize.
    Check "Remote Management"
    Click on the words "Remote Management
    If "Allow Access for:" is set to "All Users", Click the "Options.." button
    If "Allow Access for:" is set to "Only These Users:" then:
    if the user you wish to connect as is not on the "Only These Users:" list, click on the "+" button
    from the list of Users that pops up, select the user you wish to login with.
    click the "Select Button"
    you should be prompted with a list of actions you can allow to be remotely accessed by ARD.
    Check: Observe, Control, Show when being Observed, Generate Reports, Open and Quit Applications, Change Settings, Delete And Replace items, Start text chat or send Messages, Restart and Shutdown, Copy Items.
    Click the "OK" Button
    Cose System Preferences
    Your BMP should now be ready to be remotely connected to. (assuming the firewall on the BMP is off, and no other program like little snitch, or internet barrier is running)
    To connect to your BMP:
    On your ARD computer, open Apple Remote Desktop
    If you look on the left hand side of In Apple Remote Desktop there will be a column, the second item on the column listed Should be "Scanner" click on it
    Make sure scanner is set to "bonjour"
    from the list, on the right side of ARD you should see you BMP listed with what ever name you set in sharing.
    click on it, to select the computer
    click on the control screen icon from the tool bar.
    you will be prompted for the user name and password to use to connect to the computer.
    Good Luck!

  • IPod touch suddenly fast forwarding through songs and videos + voice control screen cutting in

    Hi
    In the last couple of days, it has started fast forwarding through songs and videos randomly. The voice control screen is also cutting in randomly. It happens as soon as I turn it on and play my first track or video. The only other problem I have noticed is that the volume controls on my headphones are no longer working. The headphones would be less than 6 months old and are genuine Apple ones. I don't think the problem is related because if I unplug them the fast forwarding still happens. I've tried powering it off and then re-starting it and I have been keeping the software up to date on it so I'm not sure what else I can try.
    In saying that, this morning it seems to be working properly but I'm worried the problem will return. I still can't adjust the volume via the headphones though.
    If anyone has any ideas about what I can do to resolve the fast forwarding problem, I would appreciate the feedback. The headphones I don't really care about because I can replace them.
    I've had my iPod touch for a few years and use it pretty heavily so part of me is wondering whether it is just getting to the end of its life. I'm not sure what sort of lifespan I can expect from my iPod touch.
    Thanks

    Try:
    - Try a regular pair of headphones
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • How to load and display the external flv video files in dynamicly and the how to control the flv fil

    How to load and display the external flv video files in dynamicly using AS 3.0
    and  How to control the flv file  add the play paus button and add seekbar.
    I have using to load the flv file following code
    var flvPlaceHolder1:MovieClip = new MovieClip();
    var vid1:Video = new Video(734, 408);
    flvPlaceHolder1.addChild(vid1);
    addChild(flvPlaceHolder1);
    flvPlaceHolder1.x = 1059;
    flvPlaceHolder1.y = 152;
    var nc1:NetConnection = new NetConnection();
    nc1.connect(null);
    var ns1:NetStream = new NetStream(nc1);
    vid1.attachNetStream(ns1);
    var listener1:Object = new Object();
    listener1.onMetaData = function(evt:Object):void {};
    ns1.client = listener1;
    ns1.play("GV-1600 TURNING.flv");
    ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
    function statusChanged1(ns1:NetStatusEvent):void
             trace(ns1.info.code);
            if (ns1.info.code == 'NetStream.Buffer.Empty')
                 trace('the video has ended');
                 removeChild(flvPlaceHolder1);
                 //trace('removeChild');
                gotoAndPlay(1786);
    then how to add the play,paus ,full screen button    and   seekbar,volumebar.

    I have to Create the flash presentation for our company product
    In this presentation the left  side the text animation are displayed then right side the our product video is displayed.
    In this presentation i need the following option :
    1, The first product video and animation is finished then the next product is played
    2, then the video displayed  (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
    3, then the playing video i control  it play, stop, paus button and volume bar, seek bar.
    4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
    I have finished first two steps 1 and 2
    the following are the screen short and code:-
    code :-
    var count=0;
    var flvPlaceHolder2:MovieClip = new MovieClip();   
    var vid2:Video = new Video(734, 408);
    flvPlaceHolder2.addChild(vid2);
    addChild(flvPlaceHolder2);
    flvPlaceHolder2.x = 1059;
    flvPlaceHolder2.y = 152;
    var nc2:NetConnection = new NetConnection();
    nc2.connect(null);
    var ns2:NetStream = new NetStream(nc2);
    vid2.attachNetStream(ns2);
    var listener2:Object = new Object();
    listener2.onMetaData = function(evt:Object):void {};
    ns2.client = listener2;
    ns2.play("GS-4000.flv");
    this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
    function BtnFadeIn2(event:Event):void
        if (this.currentFrame == 387)
            /*flvPlaceHolder2.x = 30;
            flvPlaceHolder2.y = 140;
            vid2.width=1800;
            vid2.height=800;
            trace('Screen size is changed');*/
            if(count==0)
            flvPlaceHolder2.x = 30;
            flvPlaceHolder2.y = 140;
            vid2.width=1800;
            vid2.height=800;
            count++;
    ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
    function statusChanged2(ns2:NetStatusEvent):void
        trace(ns2.info.code);
        if (ns2.info.code == 'NetStream.Buffer.Empty')
                trace('the video has ended');
                 removeChild(flvPlaceHolder2);
                 //trace('removeChild');
                gotoAndPlay(433);
    flvPlaceHolder2.buttonMode=true;
    flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
    function home2(e:MouseEvent):void
        if(vid2.width==734 && vid2.height==408)
            flvPlaceHolder2.x = 30;
            flvPlaceHolder2.y = 140;
            vid2.width=1800;
            vid2.height=800;
        else
            flvPlaceHolder2.x = 1059;
            flvPlaceHolder2.y = 152;
            vid2.width=734;
            vid2.height=408;

  • How could control the scroll events in ALV OO?

    Hello experts!
    I'm programing a report, inside there is a field that need time of processing. I'm using ALV OO.
    I have thought that it could only calculate the field for the lines that visualize.
    How could control the scroll events to calculate the field of the visualized lines?
    I'm using CL_SALV_TABLE class and cl_salv_events_table to control the events, but there aren't any event to control the scroll.
    best regards!

    Hi Sriram,
    I did view the information that you was attaching, but this don't resolve my problem. With methods get_scroll_info_via_id and set_scroll_info_via_id, we can get and put information of selection and view rows in the screen but we don't control when the user click in the scroll for advance or to back down a page.
    I would like to refresh the data in ALV when the user view news rows.
    I want your genial ideas.
    Best regards!

  • How to handle screen resolution in bdc session method.

    hi all,
    how to handle screen resolution in bdc session method.

    Hello,
    Why do need that for? Is it to add rows on a table control??
    If it does, add new rows by using the add button instead of adding into the table control directly to each row.
    Bye
    Gabriel.

  • How to do screen resolution in session method

    hi guru how to do screen resolution in session method.
    please tell me.
    regards
    subhasis

    Sometime back this is refered in SDN :
    Check table <i>CTU_PARAMS</i> and field <i>DEFSIZE</i> for setting fixed line of table control.
    CALL TRANSACTION 'VA01' USING it_bdcdata
    OPTIONS FROM OPT
    MESSAGES INTO it_mesg.
    opt of type ctu_params.
    WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
    WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
    WA_CTU_PARAMS-NOBINPT = 'X'.
    WA_CTU_PARAMS-NOBIEND = 'X'.
    WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
    Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
    Thanks!!

Maybe you are looking for