How to hide or supress availability control screen in VA01

Hi,
I want to hide Availability Control Screen in VA01. Can you please help me how can i supress that screen.
Regards
Malik

Hi Nabheet ,
disabling the Button wont solve the problem , System automatically do availability check based on the stock and scheduled delivery date , if no sufficient stock then system will propose new schedule line dates....
so disabling the Button wont stop doing all these checks........it needs to be done thru config/E Spot which will skip all these validations...
regards
Prabhu

Similar Messages

Show Domestic Order-OTC: Availability Control screen in VA01

Hi All,
How do we trigger the back order hint (Domestic Order-OTC: Availability Control) screen in VA01? I am trying to compare two orders that I am creating and trying to find the reason why one of the order shows this screen and the other don't. Any data that I missed causing the screen not to show up?
Edited by: frankie pascua on Apr 21, 2010 11:49 AM
Edited by: frankie pascua on Apr 21, 2010 11:54 AM

I wasn't aware that S. loc were involved. I'll give you some tips to help you out in how your systems work.
If availability check will go down to st location level is controlled by the scope of the avalability check. (Tc:OVZ9). There will be one check box - No storage location inspection. Check in what level you have the inspection per scope, ie per meterial checking group.
Go to spro->material management->consumption based planning->planning->define storage location MRP.
Check the settings against every storage location. Maybe there was a business requirement to the one who initially configured the system for different approach per storage location.
And bear in mind that if you don't specify storage location in the order, the availability check will run for the whole plan. I'm not aware, if you let the av check run, and then you specify storage locaiton, if it will re-run after at storage location level automatically.
Get back if you have any more inputs to your issue.
Regards
Agis

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

How to hide input fields on selection screen using variant attribute

Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki Kozai

Use this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin

How to hide F8 function on selection screen.

Hi,
How to hide F8 function on selection screen.

Just create a customer status and SET this status in your INITIALIZATION block.
<i>You can copy the standard status from program RSSYSTDB status %_00.</i>
Regards

Availability control Error in VA01

Hi all,
While making sales order after selection of product system is showing "Cash Sale : Availability Control" Screen but open quantity is showing one and confirmed quantity showing zero. Please suggest solution....
Regards,
Sachin

Hi
thi9s is rare case in terms of cash sales:
there should not be an issue with stock & its availability in with respect to cash sales.
please check MMBE & MD04 for the same if stock is not there post the stock & deliver the goods.
check & confirm
balajia

How to hide particular block in selection screen

Hi,
I am having different blocks in a selection screen.
How to show the blocks dynamically according to a radio button selection.
means how to Hide/show entire block.
Thanks,
anandan

Hi Anandan,
Try this program.
REPORT zvk_collect.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME NO INTERVALS.
PARAMETER : p_plant RADIOBUTTON GROUP g1 USER-COMMAND radio DEFAULT 'X',
                  p_mrp   RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME NO INTERVALS.
PARAMETER : p_werks TYPE marc-werks MODIF ID sp1.
SELECTION-SCREEN END OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME NO INTERVALS.
*PARAMETER : p_berid TYPE smdma-berid MODIF ID sp2.
*SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    CHECK screen-group1 = 'SP1' OR
          screen-group1 = 'SP2'.
    IF p_plant = 'X'.
      IF screen-group1 = 'SP2'.
        screen-input = 0.
        screen-active = 0.
        screen-required = 1.
        MODIFY SCREEN.
      ENDIF.
    ELSE.
      IF screen-group1 = 'SP1'.
        screen-input = 0.
        screen-active = 0.
        screen-required = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
Execute with Comments ON and Without Comments and See the difference
Reward if found helpful

How to hide gui buttons in selection screen

In Selection screen how to hide buttons like back, exit,cancel buttons.
can any one help.

Hi,
Create a new GUI Status for your program.. put whatever button you require for it..
In the AT SELECTION-SCREEN OUTPUT event..
SET pf-status xxx.
Regards,
Anand

How to hide a block in Selection screen ?

Hello abap gurus,
I have a requirement where I have to hide a block on Selection screen. Can anyone of u give the command for that or code..
Its urgent !
Om Sai Ram,
aRgD

Hi,
Just paste the following code in abap editor.
*Selectionscreen elements..............................................
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
p_uname     LIKE sy-uname
              MODIF ID bl1.            " User name
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS:
p_fname(10) TYPE c MODIF ID bl2
                     OBLIGATORY,       " First name
p_lname(10) TYPE c MODIF ID bl2
                     OBLIGATORY,       " Last name
p_empid(5) TYPE n MODIF ID bl2
                     OBLIGATORY.       " Employee id
SELECTION-SCREEN END OF BLOCK b2.
*" Data declarations...................................................
Work variables                                                      *
DATA:
w_uname     LIKE sy-uname.           " User name
             AT SELECTION-SCREEN OUTPUT EVENT                       *
AT SELECTION-SCREEN OUTPUT.
PERFORM validate.
            AT SELECTION-SCREEN ON FIELD EVENT                      *
AT SELECTION-SCREEN ON p_uname.
PERFORM validate_uname.
                  END OF SELECTION EVENT                            *
END-OF-SELECTION.
PERFORM output.
FORM VALIDATE                                                      *
This subroutine disables all parameters if user name is not        *
initialized or user name is not valid.                             *
There are no interface parameters to be passed to this subroutine. *
FORM validate.
w_uname = sy-uname.
IF p_uname IS INITIAL OR p_uname NE w_uname.
    LOOP AT SCREEN.
      IF screen-group1 EQ 'BL2'.
        screen-active = '0'.
      ELSE.
        screen-active = '1'.
      ENDIF.                           " IF screen-group1 EQ 'BL2'.
      MODIFY SCREEN.
    ENDLOOP.                           " LOOP AT SCREEN.
ELSEIF p_uname EQ sy-uname.
    LOOP AT SCREEN.
      IF screen-group1 = 'BL1'.
        screen-active = 0.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'BL2'.
        screen-active = 1.
        screen-output = 1.
        screen-input = 1.
        screen-invisible = 0.
      ENDIF.                           " IF screen-group1 = 'BL1'.
      MODIFY SCREEN.
    ENDLOOP.                           " LOOP AT SCREEN.
ENDIF.                               " IF p_uname IS INITIAL...
ENDFORM.                               " VALIDATE
Form VALIDATE_UNAME                                                *
This subroutine gives error message and validates the user name.   *
There are no interface parameters to be passed to this subroutine. *
FORM validate_uname .
IF p_uname IS INITIAL.
    MESSAGE 'Enter the user name'(001) TYPE 'E'.
ELSEIF p_uname NE sy-uname.
    MESSAGE 'Authorization unsuccessful'(002) TYPE 'E'.
ENDIF.                               " IF p_uname IS INITIAL.
ENDFORM.                               " VALIDATE_UNAME
Form OUTPUT                                                       *
This subroutine is used to print the output.                       *
There are no interface parameters to be passed to this subroutine. *
FORM output .
IF p_fname IS NOT INITIAL.
    WRITE: / 'First name:'(003),p_fname.
    WRITE: / 'Last name:'(004),p_lname.
    WRITE: / 'Employee id:'(005),p_empid.
ENDIF.                               " IF p_fname IS NOT INITIAL.
ENDFORM.                               " OUTPUT
I think this solves your problem.
Reward if it helps you.....
Regards,
Sandhya

How to hide some variables on variables screen in web report (in WAD)

I need to hide some optional variables (not all of them) on variables screen in web template.
Hiding the whole selection screen is not an option, since users have to populate other variables and some variables are mandatory.
Web template is based on a query that can be run in BEx Analyzer by superusers - and there they need all variables. I want to use the same query both in BEx Analyzer for superusers and on the Portal for regular users. For portal version though I need to hide some of the variables on the selection screen. Is it possible at all?
I would like to avoid creating two separate queries - one for Analyzer and one for Portal.

if the variables are optional and mandatory both avaialble
then there is no chance that u can hide them
the only option is to create a save as QUERY and remove those variable.
it is not possible to just hide the variable screen...
if u hv used they will be displayed....
if u dont want it dont use it...
and if really using another query is not advisable as u said
the only thing i can say is that... try to interact with ur security person
ask him u need to create several authorization objects for several variables
if that is possible
let him create those
assign those specific authorization object to specific user id
use it for specific variables u need
tat way super users with specaial authorization can acess the same query and can see specific variables
regular users withouts authorization of variables can see rest of variables.

How to hide command pront in SAP screen

Hi,
I have a requirment that i need to hide the command pront in SAP screen, it is very very urgent for me, please help me.
Reward for every usefull answer.
Saleem.

Hi,
Thanks for your responce...but the problem is i need to do from the program.
Saleem.

How to hide a column in MIGO screen

Hi there,
I urgently have a requirement from my Client to know if the "OK" column in the MIGO t-code can be disabled that users will not be allowed to untick the Components that are linked to the top parent part.
Also some users need to be allowed to select the Components, while few groups should not be allowed to select them but can only display when ticking the "Item OK" field.
Pls share.
Rgds,
Pri

Hi Anne,
Have you read the infomation guide for this configuration, please read below, hope it can answer your doubt .
<i>Use this function to change the settings of a table control. You can
change the width and position of a column (using drag and drop). You can
save the display at any time as a variant by entering a name and
choosing 'Create'.
You can use any variant as your personal 'default setting' for the
transation, or call it just for the current transaction. ('current
setting'). The default setting applies from the next time you call the
transaction.Choose the required variants from teh list boxes. If the
list box only contains the entry 'Basic setting', you must first create
a display variant. You can also define a new variant as the default when
you create it by selecting the corresponding checkbox.The display
defined in the application program ("Basic setting") can always be used
as the default or current setting.    </i>
Regards,
w1n

Delivery Proposal is DISABLED in Standard Order Availability Control

Hi Experts,
Please help me solve my issue, I almost checked everything under SPRO>SD>BF-->Availability Check, but still cannot resolve my issue.
Following are the symptoms of the issue that I'm encountering:
Material cannot be confirmed (even though there are stocks)
Complete Delivery, Delivery proposal & One time delivery are disabled in Availability Control Screen
Here are some of the relevant configs which I checked:
OVZJ entry for sales area is C (Delivery proposal)
Checking group maintained in Material Master
Any ideas please? ANy help would be much appreciated!

1) Check the reservations for the material in MD04. The available quantity might have been confirmed for earlier sale orders and hence reserved for those sale orders.
There are 11,000 cases in unrestricted stock. No reservations for the material.
2) Check the inhouse production time in MRP2 view of the material master. It should be filled with production lead time.
Done
3) In OVZ9, the checkbox "check w/o RLT" is unchecked.
This is our current setup
Net, issue is still there.

Hide columns in report on screen and display all in excel

I am very new to this application. Can anyone please tell me how to hide certain columns on the screen display and dump everything in excel.
Right now if I uncheck show for some columns in report attributes, it's not displayed in excel either. I would appreciate any help on this.
Thanks

I am very new to this application. Can anyone please tell me how to hide certain >>columns on the screen display and dump everything in excel.
Right now if I uncheck show for some columns in report attributes, it's not displayed in >>excel either. I would appreciate any help on this.Use htmldb_application.g_excel_format method.
for the items that you dont want in the report but want in CSV, just select that item and in its conditional display select PL/SQl expression and put htmldb_application.g_excel_format.
for items you want in report but not in CSV put - not htmldb_application.g_excel_format.
Else for columns that you want both in report and CSV, keep it blank.
Hope it helps.
Ameya.

How to hide table control in a screen

Hi, Gems,
I want to hide the table control.Using "loop at screen" I am able to hide all other components except table control.
Can anyone tell me how to hide table control in a screen?
Any help will be appreciated.
-Thanks
Surajit.

Hi,
In the PBO (in a module outside to the LOOP...ENDLOOP), use this
MODULE status_0100 OUTPUT.
IF sy-ucomm EQ space.   "Give the function code on which you want to make your table control go invisible
                                          "Give a space if you want your table control to remail invisible on display of the screen
    CLEAR: t_header[].
    LOOP AT tabcontrol1-cols[] INTO wa_control1.
      wa_control1-invisible = '1'.
      MODIFY tabcontrol1-cols[] FROM wa_control1 INDEX sy-tabix.
    ENDLOOP.
ENDMODULE.

How to hide or supress availability control screen in VA01

Similar Messages

Maybe you are looking for