How to control the cursor location(without mouse control)??

Hi,
I am now developing a swing application which need to use a thread to change the cursor location.
Can the cursor location be controlled by a thread?
thank

can be done using class Robot

Similar Messages

How to change the Network Location without admin right?

How to allow an normal user to change their network location without adminstrator rights? Thanks

You can't, unless you change your user rights to Admin. Now, you can reset all the passwords and admin through a reset process, but if this is a corporate owned Mac, you could get in trouble. Even fired. If it's your parent's Mac, then just get them to give you admin rights.

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem

Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!

Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to determine the cursor record count before the "open cursor"?

Is it possible to determine the record count of an explicit cursor without running a count()? Say, my cursor definition is something like this,
CURSOR cur_vehicle
IS
SELECT os.order_id, os.order_item, vs.part_id
vs.part_num,
vs.iso_num,
vs.model_yr
vs.dealer_cde,
vs.cust_cde,
px.plant_cd
FROM parts_source vs,
orders_source os,
plant_tbl_crossref px
wHERE os.order_id = vs.order_id
AND vs.part_id = os.part_id
AND vs.plant_cde = px.plant_cde
ORDER BY os.order_id;
I want to log the count of records returned by the above cursor prior to the first fetch, without running a count(1) for the query in cursor select.
I know adding " Count(1) over(order by null) " in the cursor SELECT will bring it. But that does not help me log the record count to some log file or table before opening the cursor for processing.
To conclude, my objective is to update the record count of cursor in some table before processing

sarvan wrote:
Is it possible to determine the record count of an explicit cursor without running a count()?
..snipped..No. The only way to do it correctly is inside that select.
Each select is a consistent read. Which means that if this is done as 2 select statements, the 1st select can see a different version of the data than the 2nd select statement. does. So if you want a count and that to be consistent and on the same version of the data than the select, it has to be done as part of the select.
Also consider what a cursor is. It is not a result set of sorts that is created in memory upfront - with a convenient interface that tells you the size/number of rows of that result set.
A cursor is basically a program that reads database data as input and produce output. A fetch from a cursor is an instruction for this program to execute and output data.
There's no data set that is created by the cursor from which the count can be determined. The cursor program does have state variables - like +%RowCount+ that specifies how many rows the cursor has thus far output. And you need to run that cursor to the end (no more output) in order to determine the total number of rows output by the cursor.

How to find the cursor on the screen?

On a PC, I could set it up so that if I could not readily see the location of the cursor on the screen I would just touch the CTRL key and a big moving circle would appear to point out the cursor location. What is the equivalent trick on iMac?
-new to Imacs

You can adjust the size of the cursor here - System Preferences > Universal Access > Mouse, near the bottom of that window. However, this is not a temporary size change - it will stay the new size until you change it again.
For a temporary (on demand) locator, try something like Mouse Locator -
http://mac-free.com/download/Mouse-Locator.html

How to select the download location? its automatically downloading to users folder in c drive. i wanna change it..plz help me out......

how to select the download location? its automatically downloading to users folder in c drive.. i wanna change to my desktop...plz help me out...

Tools -> Options -> Save files to -> Click browse button and browse for folder where you want to save the file.

I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
Allan

How to run the cursor

HI
can i knw how to run the cursor from the package. The cursor name is "cursor fet_rec".
procedure update_hdr is
cursor fet_rec is
i rhave the run procdure but i am unable to run the cursor.
procedure update_hdr is
cursor fet_rec is
select status, request_hdr_id
from xxkfupm01.kfupm_mcr_request_header
where status = 'Approved'
for update;
cnt1 NUMBER := 0;
cnt2 NUMBER := 0;
BEGIN
for rec in fet_rec Loop
select count(*)
into cnt1
from XXKFUPM01.kfupm_mcr_request_details
where request_hdr_id = REC.REQUEST_HDR_ID;
select count(*)
into cnt2
from XXKFUPM01.kfupm_mcr_request_details
where request_hdr_id = REC.REQUEST_HDR_ID
and status = 'Complete';
if (cnt1 = cnt2) THEN
update xxkfupm01.kfupm_mcr_request_header
set status = 'Complete'
where current of fet_rec;
END IF;
END LOOP;
Regards
Arif
Edited by: user11309801 on Jan 3, 2011 6:56 AM
Edited by: user11309801 on Jan 3, 2011 7:00 AM

http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to access the remote Objects Without Db_links?

Hi ,
I want to know how to access the remote objects without db_link.That is i want to access a object in some other server which has different database.

SanjayBala, just so you know that it is possible to create a database link in Oracle to non-Oracle databases in some circumstances. Look up Generic Connectivity aslo know as Heterogenous Services. With 11g Oracle has basically renamed the feature and replaced it with somethinkg named ike DG4ODBC.
I have not spent time studying the details for DB4ODBC but with HS Oracle provided the interface and you had to obtain the necessary ODBC driver on your own. I had Oracle on AIX reading and writing to SQL Server on Windows but the developers chose to write a java program and connect to both via it. On Windows and Linux platforms the necessary ODBC drivers might be available without the requirement to go out and purchase one.
The Oracle Open Gateway product is an advanced version of the above features with drivers for specific non-Oracle databases included like DB2 or Informix.
HTH -- Mark D Powell --

How to have the Chat history without the Exchange server?

How to have the Chat history without the Exchange server?

Hi,
You can try Archiving server. Archiving is the storing of IM and conferencing data in an SQL backend database. This data is not instantly readable / searchable. The Lync users are not able to read it directly. The admin can export the data using Lync powershell
and then convert it into a readable format.
Kent Huang
TechNet Community Support

HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

IPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!

iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!

iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!

I accidentally deleted all my apps and music. I can re-download the music but don't know how to get the apps back without buying them again. Any thoughts?

I accidentally deleted all my apps and music. I can re-download the music but don't know how to get the apps back without buying them again. Any thoughts?

Just follow this:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to control the cursor location(without mouse control)??

Similar Messages

Maybe you are looking for