How to control the maximum time that a dynamic sql can execute

Hi,
I want to restrict the maximum time that a dynamic sql can execute in a plsql block.
If the execution is not completed, the execution should be terminated and a exception should be raised.
Please let me know, if there is any provision for the same in Oracle 10g.
I was reading about Oracle Resource Database Resource Manager, which talks about restricting the maximum time of execution for Oracle session for a user.
However I am not sure, if this can be used to control the execution of dynamic sql in a plsql block.
Please provide some pointers.
Thank you,
Warm Regards,
Navin Srivastava

navsriva wrote:
We are building a messaging framework, which is used to send time sensitive messages to boundary system.I assume this means across application/database/server boundaries? Or is the message processing fully localised in the Oracle database instance?
Every message has a time to live. if the processing of message does not occurs within the specified time, we have to rollback this processing and mark the message in error state.This is a problematic requirement.. Time is not consistent ito data processing on any platform (except real-time ones). For example, messageFoo1 has a TTL (time to live) of 1 sec. It needs to read a number of rows from a table. The mere factor of whether those rows are cached in the database buffer cache, or still residing on disk, will play a major role in execution time. Physical I/O is significantly slower that logical I/O.
As a result, with the rows on disk, messageFoo1 exceeds the 1s TTL and fails. messageFoo2 is an identical message. It now finds most of the rows that were read by messageFoo1 in the buffer cache, enabling it to complete its processing under 1s.
What is the business logic behind the fact that given this approach, messageFoo1 failed, and the identical messageFoo2 succeeded? The only difference was physical versus logical I/O. How can that influence the business validation/requirement model?
If it does, then you need to look instead at a real-time operating system and server platform. Not Windows/Linux/Unix/etc. Not Oracle/SQL-Server/DB2/etc.
TTL is also not time based in other s/w layers and processing. Take for example the traceroute and ping commands for the Internet Protocol (IP) stack. These commands send an ICMP (Internet Control Message Protocol) packet.
This packet is constructed with a TTL value too. When TTL is exceeded, the packet expires and the sender receives a notification packet to that regard.
However, this TTL is not time based, but "+hop+" based. Each server's IP stack that receives an ICMP packet as it is routed through the network, subtracts 1 from the TTL and the forwards the packet (with the new TTL value). When a server's IP stack sees that TTL is zero, it does not forward the packet (with a -1 TTL), but instead responds back to the sender with an ICMP packet informing the sender that the packet's TTL has expired.
As you can see, this is a very sensible and practical implementation of TTL. Imagine now that this is time based.. and the complexities that will be involved for the IP stack s/w to deal with it in that format.
Making exact response/execution times part of the actual functional business requirements need to be carefully considered.. as this is very unusual and typically only found in solutions implemented in real-time systems.

Similar Messages

How to control the looping time of the for loop in 10 microseconds in labview?

I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

I'm not sure if this will hep, but this answer seems to answer this question
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

How to control the sleep time exactly

i have a thread that sleeps for 15 minutes and wakes up does some thing( send some mails ) and sleep. the problem i am facing is the thread is not running exactly in 15minutes intervals.
EX:
14:12:06
( no mails sent )
14:27:06
( no mails sent )
14:42:06
( sends some mails )
14:57:29
(no mails )
15:12:29
so that means whenever there is some processing to bo done (sendng mails ) it takes more than 15minutes.
how to control this sleep time to exactly 15 minutes no matter what it does ?

If you need exact time to elapse, you have two options:
1. use util.Timer set at fixed intervals;
2. mark current System.millis (I never remember exact terms) when sending starts and then adjust sleeptime every time you are going to send next mail. Here you can find info on this
http://developer.java.sun.com/developer/Books/threads/
Ch. 9 swing counter (note that it does not apply to swing only, it's just technique).

[Urgent!!]How to control the running time??

Hi,
I'm an undergraduate researcher in the University of Michigan. I used NI labVIEW FPGA on my current project and now i meet a problem.
I have a labview code that has runs with 3 subroutines. they execute one after another for a given time period for each iteration of the entire code. that is i built them in a flat sequence structure inside a large while loop and each of the subroutine is a while loop with several subvi's in it. not that complicated but i have to specify how long each subroutine runs. now i have a problem to set that execution time. i don't know exactly what kind of timing function i shall use. i tried the "Elapsed time" function but that only works for the first iteration. from the second iteration on each subroutine only runs for once, instead of continuing to run until the given time elapsed. so i don't know how to correctly control the running time. It's reallly urgent, so could you please give me some suggestions about it? Thanks a million!!
Xiaofei

Thank you for your suggestion!
sorry but that this method won't help because my code is sort of difficult to put into a for loop .
the logic is like this: first the output is set to 0 for a user-defined amount of time (means no excitation). secondly it gets excitation and gets output but no data saving is allowed for a user-defined amount of time. at the same time, one paramater is automatically changed. (the reason for not saving data is that there is a transient response when the parameter changes). thirdly, data saving begins with the same
parameters as before, also for a user-defined amount of time. and then after these three steps one iteration is done. for iterations there is a different parameter, the user defines the range of the parameter and the number of different values in between and the code will do the increment at equal intervals automatically. my problem now is that i don't know how to correctly control the time. i have tried various ways but no one works.
the second problem is that i don't know how to let it run and not saving data and then saving data without changing everything else. what i have now is to call the same VI twice, once for only running and no data saving and the other for saving data. but then the problem is that in between these two routines, the output suddenly becomes zero and gets excited again after i call it. My professor said that i cannot let the output become zero, otherwise there is no meaning in waiting for the excitation to become stablee. but then i don't know how to call a VI only once and let it do the saving for only the latter part of the running time. i have been working on this thing for two weeks now and still have no idea....Sorry the problem is long and tedious, but if anyone have any idea about it, please let me know, i will be most grateful. Thanks a million!!!

How to set the maximum length that a user can enter in Msgstyledtextinput

Hi Everyone,
I'm currently using EBS 11.5.1 and 10.2g DB
Is there a way that I can set the maximum length that a user can input?
I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
Developer Mode Exception encountered in item SaveLocation
Error: The item SaveLocation has a maximum length (100)
         which is not equal to that of the corresponding VO attribute
       , SaveLocation length (150).
Action: Make sure they are equal in size. There must be other way to set that value
Thanks,
Elmer

You have to set the maximum length of column to 150 to avoid this error.
You can set the same in Jdev.
Thanks
--Anil

Pxie-6556 - How to control the rise time in the digital lines (hsdio)

Hi,
Is there any way to control the rise time in the PXIe-6556 digital lines?
Even in a low frequency signal 10kHz the rise time is about 2ns.
Tks,
Solved!
Go to Solution.

Hello engfpe,
The PXIe-6556 is a 50 Ohm system, meaning the output is source series terminated to be 50 Ohms and all our cables and accessories are 50 Ohms. With this setup regardless of the data rate you should have a clean rising or falling edge regardless of the data rate. The quality of the output (rising or falling edge) at your device will be related to the impedance matching of your cables.
The PXIe-6556 cannot adjust the slew rate by itself. However you can insert some simple passive components to do this for you. I've attached below to images. The first is a schematic showing one way of slowing down the edge. The second is the a simulated waveform showing the original edge rate before slowing it down, and the slowed down edge. This simulation is not of the PXIe-6556 but instead a generic digital output for concept. In the schematic R1 is set to 34 Ohms because U1.8 has the additional 16 Ohms inside it. TL1 is the 50 Ohm output simulating the cable on the PXIe-6556. R2, R3 and C1 are components you could insert after the PXIe-6556 cable before it goes to your device/cables. In this setup the cable going to your device is TL2 which is also 50 Ohms but it could be another impedance in which case you would change R3 to match.
You can see in the attached images you can significantly slow down the edge with this setup by altering C1. I hope this helps,
Jesse O. | National Instruments R&D
Attachments:
edge_compare_schematic.jpg ‏94 KB
edge_compare_waveform.jpg ‏44 KB

How to control the maximum size of a component in a GridBagLayout

Here is a small program that demonstrates my issue (it's originally from a big program that I couldn't attach here).
I have a GridBagLayout with some components in it. Some of the components are JEditorPane (displaying some HTML) within JPanel and are individally scrollable.
Here we go:
- when I resize the main panel, every components will resize accordingly to their weight (which is here the same for all of them): fine
- when I reduce the size of the main panel until it reaches all the preferred size of each component, the scrollPane of the main panel appears so that the user can scroll: not fine
The behaviour I'm looking for is: when I reduce the size of the main panel, when it reaches the preferred size of the components, I would like that the JEditorPane (which are in JPanel with BorderLayout/CENTER) display their individual scrollbars so that I can see all the JEditor panes at the same time without having to scroll the main window.
If the user continues to reduce the size of the main panel, then, at one point, display the scrollpane of the main panel.
See what I mean? How to control this?
Here is the code:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(d, BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(e, BorderLayout.CENTER), c);
               index++;
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Many thanks in advance, I'm getting crazy on this one :)

Ok, thanks for this information, I thought I had seen this happening in the past when embedding a component in the center area of a JPanel with BorderLayout.
Anyway, as I said I tested with JScrollPane as well and it does not change anything.
Here is the code modified:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(new JScrollPane(d), BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(new JScrollPane(e), BorderLayout.CENTER), c);
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Edited by: eric_gavaldo on Sep 15, 2010 2:18 PM

How to use the column names generated from Dynamic SQL

Hi,
I have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
Please find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
OPEN insert_csr FOR CASE
WHEN v_where IS NOT NULL
THEN 'SELECT '
|| v_select
|| ' FROM '
|| v_table
|| v_where
|| ';'
ELSE 'SELECT ' || v_select || ' FROM ' || v_table || ';'
END;
LOOP
v_ins_query :=
'INSERT INTO '
|| v_ins_tab
|| '('
|| v_insert
|| ') VALUES ('
|| How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
Please help me out with the above problem.
Edited by: kumar0828 on Feb 7, 2013 10:40 PM
Edited by: kumar0828 on Feb 7, 2013 10:42 PM

>
I Built the statement as required but i need the column list because the first column value of each row should be inserted into one more table.
So i was asking how to fetch the column list in a ref cursor so that value can be inserted in one more table.
>
Then add a RETURNING INTO clause to the query to have Oracle return the first column values into a collection.
See the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/returninginto_clause.htm#sthref2307

How to control the starting time in terms of expression?

Hallo again!
I know there must be some ways to trigger the expression to start not immediately, but at any time I wish.
For e.g. I have here a code:
veloc = 35;
amplitude = 30;
decay = 1.0;
y = amplitude*Math.cos(veloc*time)/Math.exp(decay*time);
value + [0,y]
And I would like to delay the start in 2sek not just by pulling the layer to the right, but to do it in terms of a code.
Could anybody give me a hint?
would be very thankful

I think this is more what you're looking for:
timeToStart = 2;
t = time - timeToStart;
if (t >= 0){
veloc = 35;
amplitude = 30;
decay = 1.0;
y = amplitude*Math.cos(veloc*t)/Math.exp(decay*t);
}else{
y = 0;
value + [0,y]
Dan

How to control the finished goods that have already sold to customer

Dear Gurus,
I have a problem.
In normal situation, SD process is....SO->DN->Post->Billing, after post the material, the goods won't exit in the plant anymore.
But there is a special business mode.....
After we sold to customer, and AR accounting document created...
But NOW the finished goods still in our plant, we wanna manage the quantity in SAP, is it possible?
Thanks in advance.

and AR accounting document created
No it is not possible. Once the customer is debited, you cannot show the inventory in the delivering plant which is logically wrong.
G. Lakshmipathi

How to control the options in Search popup of an LOV?

I have a query panel which is based on a view criteria of a view object. One of the query item is a ComboListOfValues. I do not have control over the 'Search' window which opens when we click on the LOV inside the Query Panel. Basically, I want to control the width of the results table and I do not want the title('Search') for the dialog. Also, I want to hide the Advanced button. Is there any way to do it?

Hi,
Below is my code for the popup. What I am saying is, inside the popup I have a search parameter which in ComboListOfValues. On click on that LOV it will invoke a search popup on which we do not have control. How to control the properties in that search popup. I am not talking about initial popup(id=popup1) on which we have control and I have set all the properties. I am talking about a LOV search parameter inside the query panel(id = qryId2).
<af:popup id="popup1" contentDelivery="lazyUncached"
popupFetchListener="#{popUpBean.candSearchListener}">
<af:dialog id="dialog1" type="cancel"
title="Search Candidates"
stretchChildren="first" contentWidth="920"
contentHeight="480">
<af:panelGroupLayout layout="vertical" id="pgl30">
<af:panelHeader text="" id="ph2">
<af:query id="qryId2" headerText=""
disclosed="true"
value="#{bindings.SearchCandVOCriteriaQuery.queryDescriptor}"
model="#{bindings.SearchCandVOCriteriaQuery.queryModel}"
queryListener="#{bindings.SearchCandVOCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.SearchCandVOCriteriaQuery.processQueryOperation}"
resultComponentId="::resId2"
modeChangeVisible="false"
saveQueryMode="hidden"
modeButtonPosition="footer"
binding="#{popUpBean.searchCandQuery}"/>
</af:panelHeader>
<af:table value="#{bindings.SearchCandVO1.collectionModel}"
var="row"
rows="#{bindings.SearchCandVO1.rangeSize}"
emptyText="#{bindings.SearchCandVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.SearchCandVO1.rangeSize}"
rowBandingInterval="0"
selectionListener="#{treeSelectionBean.candDetailsSelect}"
rowSelection="single" id="resId2"
inlineStyle="width:inherit;">
<af:column sortProperty="CandidateId" sortable="true"
headerText="Candidate Id" id="resId2c1" width="80">
<af:commandLink text="#{row.CandidateId}" id="cl4"
actionListener="#{treeSelectionBean.candSearchListener}">
<af:setActionListener from="#{row.ClientId}"
to="#{pageFlowScope.clientId}"/>
<af:setActionListener from="#{row.PeopleId}"
to="#{pageFlowScope.candPeopleId}"/>
</af:commandLink>
</af:column>
<af:column sortProperty="Fullname" sortable="true"
headerText="Candidate Name" id="resId2c2" width="160">
<af:outputText value="#{row.Fullname}" id="ot42"/>
</af:column>
<af:column sortProperty="ClientName" sortable="true"
headerText="Client Name" id="resId2c3" width="165">
<af:outputText value="#{row.ClientName}" id="ot41"/>
</af:column>
<af:column sortProperty="InterviewName" sortable="true"
headerText="Interview Name" id="resId2c4" width="215">
<af:outputText value="#{row.InterviewName}"
id="ot40"/>
</af:column>
<af:column sortProperty="InterviewDate" sortable="true"
headerText="Interview Date" id="resId2c5" width="100">
<af:outputText value="#{row.InterviewDate}"
id="ot38">
<af:convertDateTime pattern="#{bindings.SearchCandVO1.hints.InterviewDate.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="CandStatusName"
sortable="true"
headerText="Candidate Status" id="resId2c6" width="160">
<af:outputText value="#{row.CandStatusName}"
id="ot39"/>
</af:column>
</af:table>
</af:panelGroupLayout>
</af:dialog>
</af:popup>
Thanks!

The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs.

How can I solve this? Every time I have the option to update an application I receive the same notification: "The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs"

Can we eliminate one minor possibility: are you in the UK and using Virgin Media cable connection? I ask because the latest 'Superhub' firmware is corrupting large downloads for some people.

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy

How to control the opening form multiple times

Greetings to all,
I used Open_Form to open the form in my 'Menu.mmb'.
My Question is:
How we control the opening of a form from multiple times?
Ex:
In my menu.mmb I used OPEN_FORM.If we open the form,which was already opened ,I want to stop the form to open. How to do this?
Thanks,
Bhujendra

pls try with
FIND_FORM('EMPDETAILS1');
OPEN_FORM('C:\INH\EMPDETAILS1');
jeneesh

How to control the maximum time that a dynamic sql can execute

Similar Messages

Maybe you are looking for