How to control what channel the airport uses

Hey guys I currently have 2 networks that have the exact same SSID and the network that has the stronger signal is not meant to work. I was wondering how I could control the airport to only use a specific channel. I can figure out what channel I need to use, I just need a way to specify to the airport card what channel to use... Thanks.
PS: if it matters I also have a ASUS WL-167g usb adapter that I can use (rausb)

chasechasecchase wrote:
I live on a college dorm and right outside my room the wireless works, but when I come inside it seems to switch to a different channel that does not work (I believe this is intentional because they tell you not to use the wireless in the dorms)... so I am looking to control the airport card not the wireless router
You are not asking us to abet you in breaking some college rules are you? That would violate the rules of these forums.
Rule 8:
"Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act."
It general it's best not to be too chatty and offer too much information unrelated to the actual issue.
"How do I change channels on my Airport?" Is all you needed to ask.
And of course, as others have pointed out you cannot. Like the old OuterLImits, "They" are in control.
Message was edited by: nerowolfe

Similar Messages

Custom Component : How to detect what charset the request used?

I want to write a file upload component, this component must use the same charset as the request used to decode file name from data post from web browser, How to detect what charset the request used?

Hi Eddie,
As Arjit suggested, there are a bunch of functions available in WEBI like GetDominantPreferredViewingLocale(), GetLocale() and GetPreferredViewingLocale(), etc. that you could use.
There are no such specific functions provided within Dashboards tool.
So, you can create a WEBI report, and have one of these formulas specified in a variable in the webi report. Then, have the block published as a BIWS and use this BIWS in your dashboard.

What are the classes used for bropdownListBox in BSP and purpose and how

what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar Shukla

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

HT1338 Can anyone tell me how to find what OS I'm using on the Mac? Tiger or Leopard? Also, how do I update from 10.6.8 to the latest version?

Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?

Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater.

How to check what is the full name of the installer is used?

Hi,
how to check what is the full name of the installer is used?
Thanks,

Very nice, but assuming you did deliberately fire the installer, don't you remember the command? Apart from that your question has (as usual) no version and no platform and no context. If you are still in the installer and using any variant of Unix you can very easily run 'ps' to see the exact command.
You would have needed to provide platform and version information when submitting the SR. Can you explain why you have this forum guess at it?
Sybrand Bakker
Senior Oracle DBA

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

How to know what are the T Codes used by client in SAP HR module in qualit

hi experts,
i have a access of quality server given by my client in SAP HR.I dont know what are the Tcodes used by client.So how i can know what are the Tcodes client is using frequently.i have to list out all TCodes urgently.
PLZ reply ASAP.
Thanx in advance..

Hi
You can do this by going to SUIM-Transactions-Executable for User
Then give the user name/id as in user master record and execute. Now the system will display the list of transaction codes used by that particular user.
Regards
Santhosh.S

What is BI ? How we implement & what is the cost to implement ?

What is BI ? How we implement & what is the cost to implement ?
Thanks,
Sumit.

Hi Sumit,
                    Below is the description according to ur query
Business Intelligence is a process for increasing the competitive advantage of a business by intelligent use of available data in decision making. This process is pictured below.
The five key stages of Business Intelligence:
1.     Data Sourcing
2.     Data Analysis
3.     Situation Awareness
4.     Risk Assessment
5.     Decision Support
Data sourcing
Business Intelligence is about extracting information from multiple sources of data. The data might be: text documents - e.g. memos or reports or email messages; photographs and images; sounds; formatted tables; web pages and URL lists. The key to data sourcing is to obtain the information in electronic form. So typical sources of data might include: scanners; digital cameras; database queries; web searches; computer file access; etcetera.
Data analysis
Business Intelligence is about synthesizing useful knowledge from collections of data. It is about estimating current trends, integrating and summarising disparate information, validating models of understanding, and predicting missing information or future trends. This process of data analysis is also called data mining or knowledge discovery. Typical analysis tools might use:-
u2022     probability theory - e.g. classification, clustering and Bayesian networks;
u2022     statistical methods - e.g. regression;
u2022     operations research - e.g. queuing and scheduling;
u2022     artificial intelligence - e.g. neural networks and fuzzy logic.
Situation awareness
Business Intelligence is about filtering out irrelevant information, and setting the remaining information in the context of the business and its environment. The user needs the key items of information relevant to his or her needs, and summaries that are syntheses of all the relevant data (market forces, government policy etc.). Situation awareness is the grasp of the context in which to understand and make decisions. Algorithms for situation assessment provide such syntheses automatically.
Risk assessment
Business Intelligence is about discovering what plausible actions might be taken, or decisions made, at different times. It is about helping you weigh up the current and future risk, cost or benefit of taking one action over another, or making one decision versus another. It is about inferring and summarising your best options or choices.
Decision support
Business Intelligence is about using information wisely. It aims to provide warning you of important events, such as takeovers, market changes, and poor staff performance, so that you can take preventative steps. It seeks to help you analyse and make better business decisions, to improve sales or customer satisfaction or staff morale. It presents the information you need, when you need it.
This section describes how we are using extraction, transformation and loading (ETL) processes and a data warehouse architecture to build our enterprise-wide data warehouse in incremental project steps. Before an enterprise-wide data warehouse could be delivered, an integrated architecture and a companion implementation methodology needed to be adopted. A productive and flexible tool set was also required to support ETL processes and the data warehouse architecture in a production service environment. The resulting data warehouse architecture has the following four principal components:
u2022 Data Sources
u2022 Data Warehouses
u2022 Data Marts
u2022 Publication Services
ETL processing occurs between data sources and the data warehouse, between the data warehouse and data marts and may also be used within the data warehouse and data marts.
Data Sources
The university has a multitude of data sources residing in different Data Base Management System (DBMS) tables and non-DBMS data sets. To ensure that all relevant data source candidates were identified, a physical inventory and logical inventory was conducted. The compilation of these inventories ensures that we have an enterprise-wide view of the university data resource.
The physical inventory was comprised of a review of DBMS cataloged tables as well as data sets used by business processes. These data sets had been identified through developing the enterprise-wide information needs model.
3
SUGI 30 Focus Session
The logical inventory was constructed from u201Cbrain-stormingu201D sessions which focused on common key business terms which must be referenced when articulating the institutionu2019s vision and mission (strategic direction, goals, strategies, objectives and activities). Once the primary terms were identified, they were organized into directories such as u201CProjectu201D, u201CLocationu201D, u201CAcademic Entityu201D, u201CUniversity Personu201D, u201CBudget Envelopeu201D etc. Relationships were identified by recognizing u201Cnatural linkagesu201D within and among directories, and the u201Cdrill-downsu201D and u201Croll-upsu201D that were required to support u201Creport byu201D and u201Creport onu201D information hierarchies. This exercise allowed the directories to be sub-divided into hierarchies of business terms which were useful for presentation and validation purposes.
We called this important deliverable the u201CConceptual Data Modelu201D (CDM) and it was used as the consolidated conceptual (paper) view of all of the Universityu2019s diverse data sources. The CDM was then subjected to a university-wide consultative process to solicit feedback and communicate to the university community that this model would be adopted by the Business Intelligence (BI) project as a governance model in managing the incremental development of its enterprise-wide data warehousing project.
Data Warehouse
This component of our data warehouse architecture (DWA) is used to supply quality data to the many different data marts in a flexible, consistent and cohesive manner. It is a u2018landing zoneu2019 for inbound data sources and an organizational and re-structuring area for implementing data, information and statistical modeling. This is where business rules which measure and enforce data quality standards for data collection in the source systems are tested and evaluated against appropriate data quality business rules/standards which are required to perform the data, information and statistical modeling described previously.
Inbound data that does not meet data warehouse data quality business rules is not loaded into the data warehouse (for example, if a hierarchy is incomplete). While it is desirable for rejected and corrected records to occur in the operational system, if this is not possible then start dates for when the data can begin to be collected into the data warehouse may need to be adjusted in order to accommodate necessary source systems data entry u201Cre-worku201D. Existing systems and procedures may need modification in order to permanently accommodate required data warehouse data quality measures. Severe situations may occur in which new data entry collection transactions or entire systems will need to be either built or acquired.
We have found that a powerful and flexible extraction, transformation and loading (ETL) process is to use Structured Query Language (SQL) views on host database management systems (DBMS) in conjunction with a good ETL tool such as SAS® ETL Studio. This tool enables you to perform the following tasks:
u2022 The extraction of data from operational data stores
u2022 The transformation of this data
u2022 The loading of the extracted data into your data warehouse or data mart
When the data source is a u201Cnon-DBMSu201D data set it may be advantageous to pre-convert this into a SAS® data set to standardize data warehouse metadata definitions. Then it may be captured by SAS® ETL Studio and included in the data warehouse along with any DBMS source tables using consistent metadata terms. SAS® data sets, non-SAS® data sets, and any DBMS table will provide the SAS® ETL tool with all of the necessary metadata required to facilitate productive extraction, transformation and loading (ETL) work.
Having the ability to utilize standard structured query language (SQL) views on host DBMS systems and within SAS® is a great advantage for ETL processing. The views can serve as data quality filters without having to write any procedural code. The option exists to u201Cmaterializeu201D these views on the host systems or leave them u201Cun-materializedu201D on the hosts and u201Cmaterializeu201D them on the target data structure defined in the SAS® ETL process. These choices may be applied differentially depending upon whether you are working with u201Ccurrent onlyu201D or u201Ctime seriesu201D data. Different deployment configurations may be chosen based upon performance issues or cost considerations. The flexibility of choosing different deployment options based upon these factors is a considerable advantage.
4
SUGI 30 Focus Session
Data Marts
This component of the data warehouse architecture may manifest as the following:
u2022 Customer u201Cvisibleu201D relational tables
u2022 OLAP cubes
u2022 Pre-determined parameterized and non-parameterized reports
u2022 Ad-hoc reports
u2022 Spreadsheet applications with pre-populated work sheets and pivot tables
u2022 Data visualization graphics
u2022 Dashboard/scorecards for performance indicator applications
Typically a business intelligence (BI) project may be scoped to deliver an agreed upon set of data marts in a project. Once these have been well specified, the conceptual data model (CDM) is used to determine what parts need to be built or used as a reference to conform the inbound data from any new project. After the detailed data mart specifications (DDMS) have been verified and the conceptual data model (CDM) components determined, a source and target logical data model (LDM) can be designed to integrate the detailed data mart specification (DDMS) and conceptual data model (CMD). An extraction, transformation and loading (ETL) process can then be set up and scheduled to populate the logical data models (LDM) from the required data sources and assist with any time series and data audit change control requirements.
Over time as more and more data marts and logical data models (LDMu2019s) are built the conceptual data model (CDM) becomes more complete. One very important advantage to this implementation methodology is that the order of the data marts and logical data models can be entirely driven by project priority, project budget allocation and time-to-completion constraints/requirements. This data warehouse architecture implementation methodology does not need to dictate project priorities or project scope as long as the conceptual data model (CDM) exercise has been successfully completed before the first project request is initiated.
McMasteru2019s Data Warehouse design
DevelopmentTestProductionWarehouseWarehouseWarehouseOtherDB2 OperationalOracle OperationalETLETLETLETLETLETLETLETLETLDataMartsETLETLETLDataMartsDataMartsDB2/Oracle BIToolBIToolBIToolNoNoUserUserAccessAccessUserUserAccessAccess(SAS (SAS Data sets)Data sets)Staging Area 5
SUGI 30 Focus Session
Publication Services
This is the visible presentation environment that business intelligence (BI) customers will use to interact with the published data mart deliverables. The SAS® Information Delivery Portal will be utilized as a web delivery channel to deliver a u201Cone-stop information shoppingu201D solution. This software solution provides an interface to access enterprise data, applications and information. It is built on top of the SAS Business Intelligence Architecture, provides a single point of entry and provides a Portal API for application development. All of our canned reports generated through SAS® Enterprise Guide, along with a web-based query and reporting tool (SAS® Web Report Studio) will be accessed through this publication channel.
Using the portalu2019s personalization features we have customized it for a McMaster u201Clook and feelu201D. Information is organized using pages and portlets and our stakeholders will have access to public pages along with private portlets based on role authorization rules. Stakeholders will also be able to access SAS® data sets from within Microsoft Word and Microsoft Excel using the SAS® Add-In for Microsoft Office. This tool will enable our stakeholders to execute stored processes (a SAS® program which is hosted on a server) and embed the results in their documents and spreadsheets. Within Excel, the SAS® Add-In can:
u2022 Access and view SAS® data sources
u2022 Access and view any other data source that is available from a SAS® server
u2022 Analyze SAS® or Excel data using analytic tasks
The SAS® Add-In for Microsoft Office will not be accessed through the SAS® Information Delivery Portal as this is a client component which will be installed on individual personal computers by members of our Client Services group. Future stages of the project will include interactive reports (drill-down through OLAP cubes) as well as balanced scorecards to measure performance indicators (through SAS® Strategic Performance Management software). This, along with event notification messages, will all be delivered through the SAS® Information Delivery Portal.
Publication is also channeled according to audience with appropriate security and privacy rules.
SECURITY u2013 AUTHENTICATION AND AUTHORIZATION
The business value derived from using the SAS® Value Chain Analytics includes an authoritative and secure environment for data management and reporting. A data warehouse may be categorized as a u201Ccollection of integrated databases designed to support managerial decision making and problem solving functionsu201D and u201Ccontains both highly detailed and summarized historical data relating to various categories, subjects, or areasu201D. Implementation of the research funding data mart at McMaster has meant that our stakeholders now have electronic access to data which previously was not widely disseminated. Stakeholders are now able to gain timely access to this data in the form that best matches their current information needs. Security requirements are being addressed taking into consideration the following:
u2022 Data identification
u2022 Data classification
u2022 Value of the data
u2022 Identifying any data security vulnerabilities
u2022 Identifying data protection measures and associated costs
u2022 Selection of cost-effective security measures
u2022 Evaluation of effectiveness of security measures
At McMaster access to data involves both authentication and authorization. Authentication may be defined as the process of verifying the identity of a person or process within the guidelines of a specific
6
SUGI 30 Focus Session
security policy (who you are). Authorization is the process of determining which permissions the user has for which resources (permissions). Authentication is also a prerequisite for authorization. At McMaster business intelligence (BI) services that are not public require a sign on with a single university-wide login identifier which is currently authenticated using the Microsoft Active Directory. After a successful authentication the SAS® university login identifier can be used by the SAS® Meta data server. No passwords are ever stored in SAS®. Future plans at the university call for this authentication to be done using Kerberos.
At McMaster aggregate information will be open to all. Granular security is being implemented as required through a combination of SAS® Information Maps and stored processes. SAS® Information Maps consist of metadata that describe a data warehouse in business terms. Through using SAS® Information Map Studio which is an application used to create, edit and manage SAS® Information Maps, we will determine what data our stakeholders will be accessing through either SAS® Web Report Studio (ability to create reports) or SAS® Information Delivery Portal (ability to view only). Previously access to data residing in DB-2 tables was granted by creating views using structured query language (SQL). Information maps are much more powerful as they capture metadata about allowable usage and query generation rules. They also describe what can be done, are database independent and can cross databases and they hide the physical structure of the data from the business user. Since query code is generated in the background, the business user does not need to know structured query language (SQL). As well as using Information Maps, we will also be using SAS® stored processes to implement role based granular security.
At the university some business intelligence (BI) services are targeted for particular roles such as researchers. The primary investigator role of a research project needs access to current and past research funding data at both the summary and detail levels for their research project. A SAS® stored process (a SAS® program which is hosted on a server) is used to determine the employee number of the login by checking a common university directory and then filtering the research data mart to selectively provide only the data that is relevant for the researcher who has signed onto the decision support portal.
Other business intelligence (BI) services are targeted for particular roles such as Vice-Presidents, Deans, Chairs, Directors, Managers and their Staff. SAS® stored processes are used as described above with the exception that they filter data on the basis of positions and organizational affiliations. When individuals change jobs or new appointments occur the authorized business intelligence (BI) data will always be correctly presented.
As the SAS® stored process can be executed from many environments (for example, SAS® Web Report Studio, SAS® Add-In for Microsoft Office, SAS® Enterprise Guide) authorization rules are consistently applied across all environments on a timely basis. There is also potential in the future to automatically customize web portals and event notifications based upon the particular role of the person who has signed onto the SAS® Information Delivery Portal.
ARCHITECTURE (PRODUCTION ENVIRONMENT)
We are currently in the planning stages for building a scalable, sustainable infrastructure which will support a scaled deployment of the SAS® Value Chain Analytics. We are considering implementing the following three-tier platform which will allow us to scale horizontally in the future:
Our development environment consists of a server with 2 x Intel Xeon 2.8GHz Processors, 2GB of RAM and is running Windows 2000 u2013 Service Pack 4.
We are considering the following for the scaled roll-out of our production environment.
A. Hardware
1. Server 1 - SAS® Data Server
- 4 way 64 bit 1.5Ghz Itanium2 server
7
SUGI 30 Focus Session
- 16 Gb RAM
- 2 73 Gb Drives (RAID 1) for the OS
- 1 10/100/1Gb Cu Ethernet card
- 1 Windows 2003 Enterprise Edition for Itanium
2 Mid-Tier (Web) Server
- 2 way 32 bit 3Ghz Xeon Server
- 4 Gb RAM
- 1 10/100/1Gb Cu Ethernet card
- 1 Windows 2003 Enterprise Edition for x86
3. SAN Drive Array (modular and can grow with the warehouse)
- 6 u2013 72GB Drives (RAID 5) total 360GB for SAS® and Data
B. Software
1. Server 1 - SAS® Data Server
- SAS® 9.1.3
- SAS® Metadata Server
- SAS® WorkSpace Server
- SAS® Stored Process Server
- Platform JobScheduler
2. Mid -Tier Server
- SAS® Web Report Studio
- SAS® Information Delivery Portal
- BEA Web Logic for future SAS® SPM Platform
- Xythos Web File System (WFS)
3. Client u2013Tier Server
- SAS® Enterprise Guide
- SAS® Add-In for Microsoft Office
REPORTING
We have created a number of parameterized stored processes using SAS® Enterprise Guide, which our stakeholders will access as both static (HTML as well as PDF documents) and interactive reports (drill-down) through SAS® Web Report Studio and the SAS® Add-In for Microsoft Office. All canned reports along with SAS® Web Report Studio will be accessed through the SAS® Information Delivery Portal.
NEXT STEPS
Next steps of the project include development of a financial data mart along with appropriate data quality standards, monthly frozen snapshots and implementation of university-wide financial reporting standards. This will facilitate electronic access to integrated financial information necessary for the development and maintenance of an integrated, multi-year financial planning framework. Canned reports to include monthly web-based financial statements, with drill-down capability along with budget templates automatically populated with data values and saved in different workbooks for different subgroups (for example by Department). The later will be accomplished using Microsoft Direct Data Exchange (DDE).
8
SUGI 30 Focus Session
As well, we will begin the implementation of SAS® Strategic Performance Management Software to support the performance measurement and monitoring initiative that is a fundamental component of McMasteru2019s strategic plan. This tool will assist in critically assessing and identifying meaningful and statistically relevant measures and indicators. This software can perform causal analyses among various measures within and across areas providing useful information on inter-relationships between factors and measures. As well as demonstrating how decisions in one area affect other areas, these cause-and-effect analyses can reveal both good performance drivers and also possible detractors and enable u2018evidenced-basedu2019 decision-making. Finally, the tool provides a balanced scorecard reporting format, designed to identify statistically significant trends and results that can be tailored to the specific goals, objectives and measures of the various operational areas of the University.
LESSONS LEARNED
Lessons learned include the importance of taking a consultative approach not only in assessing information needs, but also in building data hierarchies, understanding subject matter, and in prioritizing tasks to best support decision making and inform senior management. We found that a combination of training and mentoring (knowledge transfer) helped us accelerate learning the new tools. It was very important to ensure that time and resources were committed to complete the necessary planning and data quality initiatives prior to initiating the first project. When developing a project plan, it is important to

What channel should I use?

I'm getting lots of interference when I use my iTunes on Airport Extreme. Is it a channel issue? If so, which channel should I use? If not, what do you suggest? Thanks.
PowerBook G4 Mac OS X (10.4.9)

Hello billmale. Welcome to the Apple Discussions!
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing you from getting a good clean signal.
I suggest you perform a simple site survey, using utilities like KisMAC, MacStumbler, iStumbler, or IPNetMonitorX to determine potential areas of interference...and then, try to either eliminate or significantly reduce them.
You should also look for other wireless networks in your vicinity and note which have the strongest signal and what channel they are using. Then set your wireless radio channel to at least 3-4 channels away from that one.

Just had Fios installed. How do I set up the airport?

How do I set up the airport? Its connected to the new modem but blinking yellow. The computer recognizes it.

It is uber simple.
Give the TC to create a wireless network.. same name as the SSID of existing wireless.. same security.. should be WPA2 AES = WPA2 Personal and same password.
Usually auto channels is ok to separate them but if you need to give it a jab.. just use manual channels.. set main router to channel 1 for instance and TC to 6 or 11 for 2.4ghz.. 5ghz is not so much of an issue usually.
Apple has notes here on this setup but you can use different router not just two apple routers.
http://support.apple.com/kb/HT4260

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

What is the exact use of Sequence container

Hi all,
I am intermediate in SSIS package,i am not understanding what is the exact use of Sequence container ?
I am preparing for interview(3 years exp), if experts dont mind can you pls share some tips and questions to clear the interview ?
pls
thanks

Hi SelvakumarSubramaniam,
This blog delivers a good summary of the benefits we can get by using Sequence Container:
Easier debugging by allowing you to disable groups of tasks to focus package debugging on one subset of the package control flow.
Managing multiple tasks in one location by setting properties on a Sequence Container instead of setting properties on the individual tasks.
Provides scope for variables that a group of related tasks and containers use.
Create a transaction around all the components inside the container.
Here are some other good resources:
http://www.phpring.com/sequence-container-in-ssis/
http://sql-developers.blogspot.com/2010/06/sequence-container-in-ssis.html
Regards,
Mike Yin
TechNet Community Support

How to check what are the enhancement done for MIRO transaction

Hi Experts,
Please help me out, how to check what are the enhancement done for MIRO transaction.
Thanks in advance.
Thanks,
Basanagouda

Hi
Use the BADI
Please refer these documents: [Enhancements required in MIGO|Enhancements required in MIGO; and
[Enhancement in MIGO for Goods Movement|Enhancement in MIGO for Goods Movement;
Hope this helps!!
Regards
Vijay

What is the logical use of defining Dimension Object Relationships in DBI?

Hi!
I am reading the Oracle Daily Business Intelligence Implementation Guide and as I am following the guide on how to extend DBI, I saw a section which discusses how to create dimension object relationships. Until now, I could not fully realize what is the logical use of defining this relationship among dimension objects. I hope someone can enlighten me on this matter...
Thanks.

It LIVES ON FOREVER, and starts to take on its own personality, hungrily chasing down other objects in memory and ATTACKING THEM AT WILL. Also it grows over time, in its evil attempt to CONSUME YOUR ENTIRE MACHINE, and comes out and EATS YOU UP TOO! MWAHHHAAAHHHAAAA
No wait, that was a sci-fi. It just lives until no more references to it exist and thus becomes eligible for garbage collection, and is only a "JAVA" feature not JDBC.

How to control what channel the airport uses

Similar Messages

Maybe you are looking for