How to convert form 6i library (save in database) in library *.pll form 10g

I have a forms that I served as library and this is compiled in the database (with version Forms 6i and 9i).
But in the version of Developert 10g; when I run the frmbld.sh, I do not get the option to save and compiled it directly into the database.
It's possible???, Exists???, Which would be the correct way to do it in Developert 10g?
Thanks for the details that I can provide.

Basically you need an application server to deploy the forms. Current supported version is IAS 10g. So your forms has to be migrated to forms 10g.
For forms 6i IAS release 1 (application server) was used. Now both forms 6i and ias release 1 are desupported
best regards
Rajesh Alex

Similar Messages

  • How can I add a Save form button ( not save as ) for a custom fillable form ?

    How can I add a Save button ( not save as ) for a custom fillable form ?
    idea is ti to have a Save button  at the bottom of each page where the person filling
    the form  clicks the save button  on each page.( it is a 12 page fillable form )
    The only thing I was able to do  was add a button that  opens a Save As
    dialog box only.
    My experience  lever is - end user-intermediate.
    Thnaks.

    Thanks for the response.
    I wonder why  it wont allow.
    If I can  save ( as opposed to save as)   this form by clicking the  save icon on the  menu bar, I am not sure why it is no possible to do so on page level!
    Custom script option is not  even remotely possible!

  • How to convert .doc files to .docx in a sharepoint library programmatically.

    Is there any possibility to Convert .doc files to .docx in a sharepoint document library.
    I have thousands and lakhs of .doc files and I need to automate to convert those .doc files to .docx with an automation script or powershell script or doing it programmatically.
    Can someone help me get through this.
    Thanks
    Gayatri

    Hello Gayatri,
    You can convert files from doc to docx using following options
    Option 1 
    in bulk using  Office File Converter (OFC) and Version Extraction Tool. Please refer below url for reference - http://technet.microsoft.com/en-us/library/cc179019.aspx
    Option 2 - PowerShell
    please refer url -http://blogs.msdn.com/b/ericwhite/archive/2008/09/19/bulk-convert-doc-to-docx.aspx
    Convert DOC to DOCX using PowerShell
    I was tasked with taking a large number of .DOC and .RTF files and converting them to .DOCX. The files were then going to be imported into a SharePoint site. So I went out on the web looking for PowerShell scripts to accomplish this. There are plenty to
    choose from.
    All the examples on the web were the same with some minor modifications. Most of them followed this pattern:
    $word = new-object -comobject word.application
    $word.Visible = $False
    $saveFormat = [Enum]::Parse([Microsoft.Office.Interop.Word.WdSaveFormat],”wdFormatDocumentDefault”);
    #Get the files
    $folderpath = “c:\doclocation\*”
    $fileType = “*doc”
    Get-ChildItem -path $folderpath -include $fileType | foreach-object
    $opendoc = $word.documents.open($_.FullName)
    $savename = ($_.fullname).substring(0,($_.FullName).lastindexOf(“.”))
    $opendoc.saveas([ref]“$savename”, [ref]$saveFormat);
    $opendoc.close();
    #Clean up
    $word.quit()
    After trying out several I started to convert some test documents. All went well until the files were uploaded to SharePoint. The .RTF files were fine but even though the .DOC fiels were now .DOCX files they did not allow for all the functionality of .DOCX
    to be used.
    After investigating a little further it turns out that when doing a conversion from .DOC to .DOCX the files are left in compatibility mode. The files are smaller, but they don’t allow for things like coauthors.
    So back to the drawing board and the web and I found a way to set compatibility mode off. The problem was that it required more steps including saving and reopening the files. In order to use this method I had to add a compatibility mode object:
    $CompatMode = [Enum]::Parse([Microsoft.Office.Interop.Word.WdCompatibilityMode], “wdWord2010″)
    And then change the code inside the {} from above to:
    $opendoc = $word.documents.open($_.FullName)
    $savename = ($_.fullname).substring(0,($_.FullName).lastindexOf(“.”))
    $opendoc.saveas([ref]“$savename”, [ref]$saveFormat);
    $opendoc.close();
    $converteddoc = get-childitem $savename
    $opendoc = $word.documents.open($converteddoc.FullName)$opendoc.SetCompatibilityMode($compatMode);
    $opendoc.save()
    $opendoc.close()
    It worked, but I didn’t like it. So back to the web again and this time I stumbled across the real way to do it. Use the Convert method. No one else seems to have used this in any of the examples but it is a much cleaner way to do it then the compatibility
    mode setting. So this is how I changed my code and now all the files come in to SharePoint as true .DOCX files.
    $word = new-object -comobject word.application
    $word.Visible = $False
    $saveFormat = [Enum]::Parse([Microsoft.Office.Interop.Word.WdSaveFormat],”wdFormatDocumentDefault”);
    #Get the files
    $folderpath = “c:\doclocation\*”
    $fileType = “*doc”
    Get-ChildItem -path $folderpath -include $fileType | foreach-object
    $opendoc = $word.documents.open($_.FullName)
    $savename = ($_.fullname).substring(0,($_.FullName).lastindexOf(“.”))
    $word.Convert()
    $opendoc.saveas([ref]“$savename”, [ref]$saveFormat);
    $opendoc.close();
    #Clean up
    $word.quit()

  • How to convert a PDF to save as .doc microsoft word document

    I purchased from an online source a resume which was sent to me via PDF using Adobe.  I would like to save the PDF as a word document and when I press download and asked to convert to MS it just takes me back like a revollving door to advertisement for purchasing Adobe and back to the PDF file again.  Please help me get my PDF converted to a word document.  Does anyone out there know of a way ?
    Thanks in advance.

    Hi kathyv30365453,
    You can convert PDF to Word using either  the ExportPDF online service, or Acrobat. I checked your account, and it doesn't look like you've purchased an ExportPDF subscription. If you want to give Acrobat a try, you're welcome to download a 30-day trial from the link I reference above. In Acrobat, you choose File > Save as Other > Microsoft Word > Word Document.
    Best,
    Sara

  • How to convert muti-byte characters from US7ASCII database to UTF-8

    Hi Guys,
    We have a source database with CHARCTERSET as US7ASCII and our traget database has characterset of UTF-8. We have "©" symbol in the source databse and when we are inserting this value into our target database it is being converted as "¿".
    How can get make sure that "©" symbol is inserted on the target database. Both the databases are on version 10.2 but have a different CHARACTERSET. In the oracle documentation it mentioned that if the target database characterset is not a superset of source database characterset then this will happen but in our case UTF-8 is a superset of US7ASCII.
    Thanks,
    Ramu Kalvakuntla
    Edited by: user11905624 on Sep 15, 2009 2:58 PM

    user11905624 wrote:
    When I tried the DUMP('COLUMN','1016), this is what I got:
    Typ=96 Len=1 CharacterSet=US7ASCII: a9Considering 7-bit ASCII standard character set, the code 0xA9 is invalid.
    This has likely happened due to a pass-through scenario. See [NLS_LANG FAQ|http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm] (example of wrong setup). E.g. Windows 125x code pages all defines a character 'copyright sign' with encoding A9.
    If proper char set conversion takes place, I would expect (illegal) codes 0x80-FF to be "catched" and converted to replacement character (like U+fffd).
    Going back to the issue, how exactly are you transfering data or retrieving and inserting from source to target database?
    Edited by: orafad on Sep 17, 2009 10:56 PM

  • How to convert Latitude-Longtitude to Name location database in Powermap Porgram by myself ?

     
    Dear Sir:  My name is Dee I am consultance in Thailand. I really appritiate in Power map program because it  can show data in the new ways, so i try to apply in my project as  Estimate sale revenue of resturant in Chiang Rai Province of Thailand
    ( Scope aerea 25km2) but now i have only one problem is  cannot find method to show returant name when I click in column which it can be shown only lat and long like  a picture1. But I made map for  overall province in Thailand it can be shown
    column name like a pictue 2 . Therefore i need you to suggest me to find out solution. In my idea if i can convert lat-long to "Resturant name" and choose it in step "Choose Geography"  make be finish because now when i choose name
    map cannot be generated like a picture 3  .
     Please tell me How to inset my picture ?
    Best regards
    Dee

    Hi avinashk89,
    Welcome to post in MSDN forums.
    This is not the right forum for your question. Please post in
    ASP.NET forums where you could get better support.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to convert an xml data(clob) in database to string format in bpel??

    Now I am learning SOA ,I have one scenario which I store the each record  in xml format in database  from file adapter ,extract the xml data and store the data in another  table ...Give me any suggestions which I slove these issue .
    Thanks in advance.

    Hi
    You can try the below xpath function to convert the xml into string - orcl:get-content-as-string(/xsdLocal:SAPOrderRequest)
    To convert the string back to XML - ora:parseEscapedXML(bpws:getVariableData('stringpayloadVar'))
    Regards
    Albin I

  • How to convert data in Chinese language in database to English

    Dear All,
    We have some urgent query.
    One of our client having data in SAP and the data is in Mandarian Language in database.
    Now we have to implement the OBI Apps, so my query is as we dont know Mandarian Language so is there any way that OBI Apps or OBIEE or Informatica will translate the data into English so that we can understand the data, or is there any other way to handle this situation.
    Its very urgent so kindly help us at the earliest.
    Regards
    Tarang Jain

    One of our client having data in SAP and the data is in Mandarian Language in database.
    so my query is as we dont know Mandarian Language so is there any way that OBI Apps or OBIEE or Informatica will translate the data into English so that we can understand the data, or is there any other way to handle this situation.Why do you want to understand the Manadarin Data.If it is stored in Database it is meant only for the users to access them.If this is in a development stage then
    There is no way to translate the data in Oracle.I dont know about third party Language translation sofwtwre
    This is one of the reason some companies prefer Guys with regional language experience/exposure
    How to achieve Transliteral from Chinese to English in Oracle
    This link also can help

  • Clearing the forms after default Save Button pressed

    HI,
    in forms 6i how to clear the form after the save button is pressed, ie the form uses default menu and smart bar. the user wants to clear the form once he selects save from the menu or after pressing the save icon...
    any idea...?
    regards
    Kris

    try on-commit trigger on form level through clear_form procedure but cursor remain stay on the same record
    I think your requirement is that when user commits a record a new blank record appear so also add "create_record" procedure ;
    .but u have to apply some logic on that trigger also it ever fires when user edit/insert/delete a record and commit;
    Hope it clears now!

  • How to Convert Date to Month in Database which is pointing to EBS, Not DWH.

    Hi Friends,
    We are planning to create reports in OBIEE and the Source is EBS. That means, we don’t want to depends on Datawarehouse and Informatica and OBIApps. We just create some reports and they are pointing to EBS database.
    For testing purpose, we have taken one HR Report and it containsthe below columns:
    Month (Dim)
    Revenue Per Employee Headcount (Fact)
    Average Cost per Active Workforce Headcount (Fact)
    In my little investigation, we found that Revenue column is coming from EBS: GL_BALANCES. And we configured W_Day_D base table in DAC as there is no Month column in EBS (Not sure).
    *** Coming to my problem, how can I call Month column in my database pointed to EBS. How to convert Date to Month in my database.
    I could be wrong but anyone please look into this issue.. How can I create columns for that exact OBI report in EBS database instead of DwH.
    Thanks in Advance..
    Raghu Nagadasari

    Hi Veeresh,
    You are right. Here, no need of using W_DAY_D table, but, we need all the stuff from the table and to explain my problem i have taken that table as an example. Now, we ran scripts for W_MONTH_D and W_DAY_D tables with EBS columns. So, we are getting data for the tables. In the same manner we have to create scripts for the below tables.
    W_GL_ACCOUNT_D
    W_GL_OTHER_F
    W_STATUS_D
    W_MCAL_DAY_D
    W_EMPLOYMENT_STAT_CAT_D
    W_WRKFC_BAL_A
    W_DAY_D (Completed)
    W_MONTH_D (Completed)
    But, we are not aware of EBS Tables and their columns much. So, we are back tracing from RpD --> DAC --> Info --> EBS for each and every column and its taking much time.
    So, if anyone of you facing the same issue, please share the EBS tables for the corresponding OBI tables, which are mentioned above.

  • How to convert smartforms into Adobe forms.

    Hi......
    How to convert smartforms into Adobe forms.
    Regards
    Anbu B

    Hi,
    You need to use the Function Module CONVERT_OTF.
    Please check the below code
    REPORT zsuresh_test.
    Variable declarations
    DATA:
    w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
    w_fmodule TYPE rs38l_fnam,
    w_cparam TYPE ssfctrlop,
    w_outoptions TYPE ssfcompop,
    W_bin_filesize TYPE i, " Binary File Size
    w_FILE_NAME type string,
    w_File_path type string,
    w_FULL_PATH type string.
    Internal tables declaration
    Internal table to hold the OTF data
    DATA:
    t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
    Internal table to hold OTF data recd from the SMARTFORM
    t_otf_from_fm TYPE ssfcrescl,
    Internal table to hold the data from the FM CONVERT_OTF
    T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
    This function module call is used to retrieve the name of the Function
    module generated when the SMARTFORM is activated
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = w_form_name
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    fm_name = w_fmodule
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Calling the SMARTFORM using the function module retrieved above
    GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
    format of the output
    w_cparam-no_dialog = 'X'.
    w_cparam-preview = space. " Suppressing the dialog box
                                                        " for print preview
    w_cparam-getotf = 'X'.
    Printer name to be used is provided in the export parameter
    OUTPUT_OPTIONS
    w_outoptions-tddest = 'LP01'.
    CALL FUNCTION w_fmodule
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    control_parameters = w_cparam
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    output_options = w_outoptions
    USER_SETTINGS = 'X'
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    job_output_info = t_otf_from_fm
    JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    t_otf[] = t_otf_from_fm-otfdata[].
    Function Module CONVERT_OTF is used to convert the OTF format to PDF
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    FORMAT = 'PDF'
    MAX_LINEWIDTH = 132
    ARCHIVE_INDEX = ' '
    COPYNUMBER = 0
    ASCII_BIDI_VIS2LOG = ' '
    PDF_DELETE_OTFTAB = ' '
    IMPORTING
    BIN_FILESIZE = W_bin_filesize
    BIN_FILE =
    TABLES
    otf = T_OTF
    lines = T_pdf_tab
    EXCEPTIONS
    ERR_MAX_LINEWIDTH = 1
    ERR_FORMAT = 2
    ERR_CONV_NOT_POSSIBLE = 3
    ERR_BAD_OTF = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    To display File SAVE dialog window
    CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
    WINDOW_TITLE =
    DEFAULT_EXTENSION =
    DEFAULT_FILE_NAME =
    FILE_FILTER =
    INITIAL_DIRECTORY =
    WITH_ENCODING =
    PROMPT_ON_OVERWRITE = 'X'
    CHANGING
    filename = w_FILE_NAME
    path = w_FILE_PATH
    fullpath = w_FULL_PATH
    USER_ACTION =
    FILE_ENCODING =
    EXCEPTIONS
    CNTL_ERROR = 1
    ERROR_NO_GUI = 2
    NOT_SUPPORTED_BY_GUI = 3
    others = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
    presentation server
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE = W_bin_filesize
    filename = w_FULL_PATH
    FILETYPE = 'BIN'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = ' '
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = T_pdf_tab
    FIELDNAMES =
    EXCEPTIONS
    FILE_WRITE_ERROR = 1
    NO_BATCH = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE = 4
    NO_AUTHORITY = 5
    UNKNOWN_ERROR = 6
    HEADER_NOT_ALLOWED = 7
    SEPARATOR_NOT_ALLOWED = 8
    FILESIZE_NOT_ALLOWED = 9
    HEADER_TOO_LONG = 10
    DP_ERROR_CREATE = 11
    DP_ERROR_SEND = 12
    DP_ERROR_WRITE = 13
    UNKNOWN_DP_ERROR = 14
    ACCESS_DENIED = 15
    DP_OUT_OF_MEMORY = 16
    DISK_FULL = 17
    DP_TIMEOUT = 18
    FILE_NOT_FOUND = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR = 21
    OTHERS = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Thanks,
    Ruthra

  • How to convert a Static LiveCycle Form into Dynamic one?

    hi there, i have designed a static form and have save as a static form. and now i need to convert it to dynamic form...how i do this? when i open that form i have only one "static form" option available in Adobe LC ES 8.2...please suggest...

    Just cast the FXP to a U32, shift right by 14 bits, and display....
    Message Edited by altenbach on 12-04-2009 08:14 AM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    festkomma.png ‏16 KB

  • How to convert static pdf file to dynamic xml form pdf

    Hi All,
    I have generated one pdf report. I need to do build some logic in that generated pdf file. For this i need to convert this generated static pdf file to dynamic xml form pdf using Adobe LifeCycle Desinger. I opened my generated static pdf in Adobe LifeCycle Desinger and i tried to save this file in dynamic xml form pdf but it is not showing that option.
    How do we convert those type of reports to dynamic xml pdf?
    Advance Thanks
    Prasad Sagala

    Hi djaknow,
    Thanks for your reply, i got it now.But i am facing another problem like, my generated static pdf file has some logos, charts and some art symbols. For those if i am opening in LC and set the target version as 8.1 & above then saved as dynamic xml form pdf, Now i opened that dynamic xml form pdf the content(Images,logs and Art symbols) was not show me. It is comming fine if pdf does not contain any images, logos...etc.
    Can you tell me how i can i convert all the content( including images, logos ...etc) in my static pdf to dynamic xml form pdf.
    Advance Thanks
    Prasad Sagala

  • How do I convert an audio CD format album in my library into MP3

    Here's my problem. I have two vehicles. The older vehicle only plays audio CDs and the newer vehicle will play MP3 songs. So I want to burn two CDs, an audio and an MP3.
    I imported my original CDs into iTunes and kept them in the original format, not as MP3. I then burned an audio CD and it plays correctly. Now I want to burn an MP3 CD but got an error that iTunes cannot burn the MP3 CD as the original songs are not in MP3 format. I don't know how to convert these songs to MP3 and in all the help info I have read there is nothing about this.
    I really don't want to delete these songs from the library and re-import them as MP3. that's a lot of music and time.
    Does anyone have any ideas?
    Thanks, George

    You can use iTunes to convert the songs from your CDs to another format. When you convert a song in iTunes it will be converted to the format that you have set to import your CDs in. Converting creates a second copy of the song in the format you have chosen which gives you the opportunity to either keep or delete the original. You can get details on these pages:
    How to convert a song to a different format
    How To Choose Import Settings

  • How can i save the data in a jpanel form to a .txt document

    how can i save the data in a jpanel form to a text file using parse function,this should happen when i click a save button .
    please help me..

    each time when i fill the form and click save button ,all the data in the form should be written to a text file and each time when i repeat it should append to the old data in the text file.the elements in the form should be seperated by pipe delimeter.
    thanks for your patience..

Maybe you are looking for