How to Convert frames into minutes and seconds

Hi,
does anyone know how to convert frames into time (minutes and
seconds). I need the users to view the swf with current time being
played and over time. I have 2152 frames in total and I want that
to be converted to time. Can anyone help me on this. I would really
appreciate it. It is very urgent!!!!
Thanks

Time Indicator,
> does anyone know how to convert frames into time
(minutes
> and seconds).
That depends entirely on the framerate of the movie. At the
default
12fps, 12 frames would be one second; 24 frames would be two.
At 24fps, 24
frames would be one second.
> I need the users to view the swf with current time being
played
> and over time. I have 2152 frames in total and I want
that to be
> converted to time. Can anyone help me on this. I would
really
> appreciate it. It is very urgent!!!!
Judging by your four exclamation points, I'd say it's
definitely urgent!
Well, again, if you're at 12fps, 2152 frames would take 179
seconds, or 2
minutes and 59 seconds. I arrived at that number by dividing
2152 by 12.
Keep in mind, though, framerate is actually more of a
guideline than an
exact figure. Framerate determines the rate at which Flash
will *try* to
display content. On an especially slow computer, the Flash
Player may not
be able to keep up, and the same number of frames might
actually take more
time.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Similar Messages

Format cells entry into minutes and seconds

I would like to set up a column of cells that would automatically convert a numerical value to a time format in minutes and seconds. For example, if the user inputs '30', the cell would display ':30'. If the input is '230', the cell would display as '2:30'. How would I do this?

pml,
You may use Custom Format to do this. Set the default Integers placeholder to 2 places and to Hide Separator, then type a Colon, then copy the integers placeholder on the left and paste it on the right.
Now you have ##:##. As you make entries to cells with that format they will be displayed looking like Time per your requirement. For instance 230 will become 2:30. Bear in mind that these won't actually be Time/Date or even Duration values, they will just look that way.
Then if you wish to do calculations on those inputs you will need to first convert them to Duration with an expression that turns the input into minutes and seconds.
Jerry

Regarding function module to convert hours to minutes and seconds to minute

hi all,
is there any function module to convert hours to minutes and seconds to minutes....if so please guided me....i hav req like this...want to convert all those to minutes[seconds and hours]....

Hi,
Use FM
SD_CALC_DURATION_FROM_DATETIME
Pass paramters like
I_DATE1 16.09.2008
I_TIME1 10:33:00
I_DATE2 16.09.2008
I_TIME2 19:00:00
and you will get the result as below..
E_TDIFF 8:27
8 hours and 27 minutes...
Now u can use this values of hours and minutes to get the exact wage type values... get the details from HR module and multiply it with the hours and minute and calculate it...
Use Offsets and get the hour and minute value from E_TDIFF
Hope it will solve your problem..
Thanks & Regards,
Naresh

How to convert frames into hours:minutes:seconds?

if I have some columns which contains the time value in frames, i.e. Content_Duration, program_duration etc.
How can I convert those frames in hh:mm:ss?
Is it possible to do it with a function do that so that I can re-use it?
Thanks

I am not quite sure where you get content_interval from?CONTENT_INTERVAL comes from the function call "numtodsinterval( content_duration / 1500, 'MINUTE' )" in the inline view.
You might want to code it as "numtodsinterval( content_duration / 25, 'SECOND' )" to match the 25 frames/second standard you mentioned after I posted my reply.
will it allow more than 99 hours? i.e. 154:57:40?Actually, it won't work for more than 23 hours, 59 minutes, 59 seconds. For larger numbers this technique requires a field for the number of days, like this.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 29 12:41:38 2007
create table t ( content_duration number );
Table created.
insert into t values ( 1500*60*99 /* = 99 hours */ );
1 row created.
commit;
Commit complete.
select
lpad(extract(DAY    from content_interval),2,'0')||' '||
lpad(extract(HOUR   from content_interval),2,'0')||':'||
lpad(extract(MINUTE from content_interval),2,'0')||':'||
lpad(extract(SECOND from content_interval),2,'0')
as result
from
( select numtodsinterval( content_duration / 25, 'SECOND' ) as content_interval
    from t
RESULT
04 03:00:00
1 row selected.
-- if you're going to show DAYS though, the following way is simpler
select
cast
( numtodsinterval( content_duration / 25, 'SECOND' ) as interval day(2) to second(0))
as result
from t ;
RESULT
+04 03:00:00
1 row selected.If you really need output like 99:00:00 instead of +04 03:00:00 then take Volder's approach.
Is it possible to do it as a function?Anything you can do with a SQL query you can probably do inside a function, but for a line of code like "cast ( numtodsinterval( ..." I personally wouldn't bother.
Joe Fuda
SQL Snippets

How to convert XML into idocs and post in ECC using PI

Hello All,
I want to configure the scenario like this MDM->PI->ECC. Using FTP I am getting able to fetch the xml file from MDM Server Ready folder. Now, I need to convert this XML file into Idocs and post it in ECC. Can anyone provide me step by step configuration in PI to achieve this. I have configured communication channel with adapter type Idoc in Itegration Builder. But, I am not sure where it will do the conversion of XML into Idoc and how do post it to ECC. I am working first time on PI 7.1. I have worked on XI 3.0 in 2006-2007. Any help to configure this step by step shall be appreciated.
Thanks & Regards,
Hemal

In you have the XML from MDM you have to use the mapping provided by the funtionals in the Funtional specification documents. once you did it you must configure the Receiver IDoc Adapter. and later dont fonget to configure properly the ReceiverAgreement.
as you receive the docuement from MDM via FTP, thats not a SAP System that means that you have to define PI as the sender of the IDoc,otherwise you will have the Error "Unable to convert the sender service to an ALE logical system"
to do that in the receiver Agreement>Header Mapping>Sender System-->Select PI server.
Take in mind to send IDocs to any SAP System, the system that send it must be a SAP system too. thats why you configure it
http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
Another thing is you have configure the ALE distribution Model.
se this:
http://wiki.sdn.sap.com/wiki/display/XI/FileToIDOC
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Let us know
Rodrigo P-.

How can I see the minutes and seconds countdown of the song?

does it have to be set up in the settings/tools? how do i know how much of the song has played or is remaining? I thought I could swipe from the bottom (like we do with the iphone to get the flashlight) - but no luck. Can anyone help? Thank you.

Hi Christine,
I apologize, I'm a a bit unclear on the exact nature of the issue you are describing. The time played/remaining on a song playing on an iPod nano should be displayed on the Now Playing screen. For the newer iPod nanos (7th Gen), you may find the Music and Other Audio section (pg 17) of the following Manual helpful:
iPod nano User Guide (7th Gen)
http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
Regards,
- Brenden

How to convert smartform into pdf and send through mail

Hi Guru,
I want to send smartform to mail after converting into pdf format.
if anyof u gives solution its greate.
Thanks & Regards,
Lakshmi..

Hi,
i can help you till
downloading the smartform as pdf format
check this
DATA: GIT_BSIK LIKE BSIK OCCURS 0 WITH HEADER LINE.
Variable declarations
DATA:
W_FORM_NAME TYPE TDSFNAME VALUE 'ZFII_EDD001',
W_FMODULE TYPE RS38L_FNAM,
W_CPARAM TYPE SSFCTRLOP,
W_OUTOPTIONS TYPE SSFCOMPOP,
W_BIN_FILESIZE TYPE I, " Binary File Size
W_FILE_NAME TYPE STRING,
W_FILE_PATH TYPE STRING,
W_FULL_PATH TYPE STRING.
Internal tables declaration
Internal table to hold the OTF data
DATA:
T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
T_OTF_FROM_FM TYPE SSFCRESCL,
Internal table to hold the data from the FM CONVERT_OTF
T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    FORMNAME = W_FORM_NAME
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    FM_NAME = W_FMODULE
    EXCEPTIONS
    NO_FORM = 1
    NO_FUNCTION_MODULE = 2
    OTHERS = 3
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
W_CPARAM-NO_DIALOG = 'X'.
W_CPARAM-PREVIEW = SPACE. " Suppressing the dialog box
" for print preview
W_CPARAM-GETOTF = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
W_OUTOPTIONS-TDDEST = 'ZPC_'.
      CALL FUNCTION W_FMODULE
      EXPORTING
      ARCHIVE_INDEX =
      ARCHIVE_INDEX_TAB =
      ARCHIVE_PARAMETERS =
      CONTROL_PARAMETERS = W_CPARAM
      MAIL_APPL_OBJ =
      MAIL_RECIPIENT =
      MAIL_SENDER =
      OUTPUT_OPTIONS = W_OUTOPTIONS
      USER_SETTINGS = 'X'
      IMPORTING
      DOCUMENT_OUTPUT_INFO =
      JOB_OUTPUT_INFO = T_OTF_FROM_FM
      JOB_OUTPUT_OPTIONS =
           TABLES
            ITAB                       = GIT_BSIK
      EXCEPTIONS
      FORMATTING_ERROR = 1
      INTERNAL_ERROR = 2
      SEND_ERROR = 3
      USER_CANCELED = 4
      OTHERS = 5.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
T_OTF[] = T_OTF_FROM_FM-OTFDATA[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
      FORMAT = 'PDF'
      MAX_LINEWIDTH = 132
      ARCHIVE_INDEX = ' '
      COPYNUMBER = 0
      ASCII_BIDI_VIS2LOG = ' '
      PDF_DELETE_OTFTAB = ' '
      IMPORTING
      BIN_FILESIZE = W_BIN_FILESIZE
      BIN_FILE =
      TABLES
      OTF = T_OTF
      LINES = T_PDF_TAB
      EXCEPTIONS
      ERR_MAX_LINEWIDTH = 1
      ERR_FORMAT = 2
      ERR_CONV_NOT_POSSIBLE = 3
      ERR_BAD_OTF = 4
      OTHERS = 5
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks & regards,
Venkatesh

I need help to convert hours,minutes and seconds to seconds.

Hi, I need help with the code on how to convert the hours,minutes and seconds to seconds. I don't know which formula to use so that I can get the results in total number of seconds. Thanks.

Jos ("when in doubt: parenthesize correctly")Bracist.You're more right than you'd known: last week I climbed over a safety
fence (which I wasn't supposed to do of course) to adjust the position
of an optical measurement device we installed in a huge production
machine in a factory. I stepped on some sort of hose; the end of that
hose broke loose and hit me straight in the middle of my lower jaw. My
front teeth feel wiggly now and my molars on the left of my lower jaw are
not what they used to be. This Wednesday I get that all fixed at some
dental clinic. Keep your fingers crossed because me+dentists == war.
My tongue continuously keeps on reporting craters and disaster ;-)
Jos, how's it going? Besides a possible loss of some teeth, I'm fine ;-)
My Spring/Hibernate journey continues. I'm trying out Hibernate 3.2
annotations and the Ant tools. So far, so good.Good to hear. At the moment I'm putting my teeth (sic) in that darn snmp
stuff which simply refuses to work the way I want it and besides that I'm
heavily involved in some of that SAP stuff. Spring is not in the vicinity for
me in the next couple of months sadly enough.
kind regards,
Jos

How to conver this System.nanoTime() into Hours,minutes and second

I am getting my Total time with the help of this function ie System.nanoTime(). But i want to Display in the form of Hours,minutes and second.
So can any one plz tell me that how i will do this conversion.

If it's less than 24 hours you can use Calendar. or SimpleDateFormat. Add the epoch time for some convenient midnight to the milliseconds value (divide nanos by 1000000).
Otherwise it's just successive division and remaindering.
Probably nanos is higher resolution than you need, milliseconds is easier.

How do I log the time in hours, minutes and seconds to a table

Hi
I'm a relatively new user of Labview. I am currently writing a program that logs the temperature of an oven and the current time to a table and graph. I am using a GPIB card to communicate with the oven. I have used the Get Date/Time string to get the time and the Decimal String to Number to convert the time to a number which I have then put into an array which goes to a table and graph. My problem at the moment is that the time is being logged in hours only. I need to log the time in hours, minutes and seconds. Can you tell me how I can do this?

Hi,
I can see the setup now. The decimal string to number will only ever give the hours, since the ':' character is not part of a number, so won't translate. Use the code I attached previously to get the time as a timestamp, and then go from there.
I've made some modifications, although you'll need to alter the file save to take into account the double precision number
for the timestamp is now 3E+9 (since it's seconds since 1904!!), but since you're writing to a comma separated values (or tab deliminated) style file, this shouldn't be a problem. You could always do a textual save from the table instead.
Thanks
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Attachments:
temp time program.vi ‏98 KB

How can I make a row of cells containing 3-digit decimals, who's values resulted from calculations within the spreadsheet, appear as durations of minutes and seconds?

Row 6 in this spreadsheet is the result of Row 2/Row 3 as evidenced by the formula listed while Cell Y6 selected. How can I make the values in this row appear as durations of minutes and seconds rather than 3-digit decimals? For example, rather than appearing as 9.84 I would like the value of Cell Y6 to appear as 9:50 or 9min 50sec. (obviously .84x60seconds 50 seconds). I tried changing the cell formats from "number" to "duration," but no change is made. Using the "duration" format does however work if I am manually entering the decimal value into the cell rather than allowing it to result from another caluclation within the spreadsheet. Is there a solution to this within Numbers '09? You can see why I would want the "pace" displayed in minutes and seconds. Thanks in advance!
Ryan

Hi Ryan,
You wrote:
"The problem is that my "Distance" is a row of automatically generated values resulting from ((Row1/60)*Row 6). Changing the format of Row 1 to minutes causes row two to be expressed as a duration, which obviously it shouldn't because it is a distance. The spreadsheet has to be designed so that all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace). The rest of the cells must be automatically poulated as a result of formulas."
I'm assuming that where you say "Row 1" in this you mean "Row 2", which is labeled "Time" in the example in the OP.
In the original post, you presented a formula from cell Y6. Replacing the Header labels in that formula's cell reference with the Addresses of the referenced cells, the formula was:
Y6: =Y2/Y3
In this post, you are saying that Y6 contains entered data: "...all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace).
Which is correct?
Regards,
Barry

How to insert degree, minute and seconds in a cell

How to insert degrees, minutes and seconds in a cell. Need operate trigonometry functions

Hi harrigorri,
Does this work for you?
Degrees
Minutes
Seconds
Decimal degrees
128
26
45
128.445833333333
Formula in E2
=B2+C2÷60+D2÷3600
Font size enlarged to show the division symbol ÷
Regards,
Ian.
Edit: 3600, not 360

How can i use minutes and seconds in my job interval

Sir,
I want to use minutes and seconds in my job interval.
suppose i want to run my job on 1:15:10 AM what will be the syntax. my code is below.
Declare
jobno number;
BEGIN
DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;',trunc(SYSDATE + 1) + (1/24),'trunc(SYSDATE + 1) + (1/24)');
END;
Thanks in advance.

Declare
jobno number;
BEGIN
DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;','trunc(SYSDATE + 1) + 4510/86400','trunc(SYSDATE + 1) + 4510/86400');
END;
number of hours in a day = 24
number of minutes in a day = (24 * 60) = 1440
number of seconds in a day = (24 * 60 * 60) = 86400
4510 is the number of seconds in 1 hour 15 minutes and 10 seconds.

How can I change the timer in the clock app to minutes and seconds instead of hours and minutes?

Is it wishful thinking or a false memory? It seems like there used to be a way to change the timer function of the clock from hours and minutes to minutes and seconds. I feel like there's a magic tap or secret swipe that I discovered but have forgotten. Am I totally delusional?

We may have to wait for an update. Aside from changing the country, I'm not sucre this can be done. There is no Health App in the System preferences and no way to modify from within the app. Weird.
If you go to Language & Region under general settings and choose any other country, you will get Metric. I have the opposite problem. I live in a Metric country and want my health app to be in lbs and inches which is what I am used to.

How to convert report into alvgrid please hepl

how to convert report into alvgrid please hepl

BALVSD01 check this program u will know r see below code
sample prog
REPORT ZMAT11                                  .
TYPE-POOLS : slis.
TABLES : mkpf,
         mseg,
         t001w,
         t001l.
TYPES : BEGIN OF ty_t001w,
          werks TYPE t001w-werks,
          name1 TYPE t001w-name1,
        END OF ty_t001w,
        BEGIN OF ty_makt,
          matnr TYPE makt-matnr,
          maktx TYPE makt-maktx,
        END OF ty_makt,
        BEGIN OF ty_t001l,
          lgort TYPE t001l-lgort,
          lgobe TYPE t001l-lgobe,
        END OF ty_t001l.
DATA : BEGIN OF it_mat OCCURS 0,
        mblnr LIKE mseg-mblnr,
        zeile LIKE mseg-zeile,
        mjahr LIKE mseg-mjahr,
        bldat LIKE mkpf-bldat,
        budat LIKE mkpf-budat,
        bwart LIKE mseg-bwart,
        matnr LIKE mseg-matnr,
        maktx LIKE makt-maktx,
        erfmg LIKE mseg-erfmg,
        erfme LIKE mseg-erfme,
        werks LIKE mseg-werks,
        name1 LIKE t001w-name1,
        lgort LIKE mseg-lgort,
        lgobe LIKE t001l-lgobe,
        umwrk LIKE mseg-umwrk,
        name2 LIKE t001w-name1,
        umlgo LIKE mseg-umlgo,
        lgobe1 LIKE t001l-lgobe,
        END OF it_mat.
DATA : it_t001w TYPE TABLE OF ty_t001w
                 WITH HEADER LINE,
       it_makt TYPE TABLE OF ty_makt
               WITH HEADER LINE,
       it_t001l TYPE TABLE OF ty_t001l
                WITH HEADER LINE.
DATA : ls_layout TYPE slis_layout_alv,
       it_fcat TYPE slis_t_fieldcat_alv ,
       wa_fcat TYPE slis_fieldcat_alv,
       lh TYPE slis_t_listheader,
       ls TYPE slis_listheader,
       it_events TYPE slis_t_event ,
       ls_event TYPE slis_alv_event ,
       w_var TYPE i.
DATA : l_date(10).
DATA : l_date1(20),
       ztabix LIKE sy-tabix.
DATA : l_repid LIKE trdir-name.
l_repid = 'ZMAT11'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_werks FOR mseg-werks,
                 s_lgort FOR mseg-lgort,
                 s_umwrk FOR mseg-umwrk,
                 s_umlgo FOR mseg-umlgo,
                 s_bwart FOR mseg-bwart,
                 s_budat FOR mkpf-budat,
                 s_mjahr FOR mkpf-mjahr.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001w INTO t001w
                          WHERE werks IN s_werks.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Supplying Plant'.
ENDIF.
SELECT SINGLE * FROM t001w INTO t001w
                          WHERE werks IN s_umwrk.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Receiving Plant'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
                          WHERE lgort IN s_lgort.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Supplying St.Loc'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
                          WHERE lgort IN s_umlgo.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Receiving St.Loc'.
ENDIF.
START-OF-SELECTION.
ls-typ = 'H'.
ls-info = 'Material Document List'.
APPEND ls TO lh.
ls-typ = 'S'.
WRITE: sy-datum TO l_date USING EDIT MASK '__/__/____'.
CONCATENATE 'DATE :' l_date INTO l_date1 SEPARATED BY space.
ls-info = l_date1.
APPEND ls TO lh.
PERFORM field_cat.
PERFORM f001_get_data.
END-OF-SELECTION.
IF it_mat[] IS INITIAL.
    MESSAGE i000(8i) WITH 'No data Found'(m01).
    EXIT.
ENDIF.
PERFORM process_data.
PERFORM display_data.
*&      Form f001_get_data
      text
--> p1        text
<-- p2        text
FORM f001_get_data .
SELECT amblnr azeile amjahr abwart a~matnr
           aerfmg aerfme awerks algort aumwrk aumlgo
           b~budat
           b~bldat INTO CORRESPONDING FIELDS OF TABLE it_mat
                   FROM mseg AS a
             INNER JOIN mkpf AS b
                ON amblnr = bmblnr
               AND amjahr = bmjahr
             CLIENT SPECIFIED
          WHERE a~mandt EQ sy-mandt
            AND a~werks IN s_werks
            AND a~lgort IN s_lgort
            AND a~umwrk IN s_umwrk
            AND a~umlgo IN s_umlgo
            AND a~bwart IN s_bwart
            AND b~budat IN s_budat
            AND b~mjahr IN s_mjahr.
IF sy-subrc = 0.
    SELECT matnr maktx INTO TABLE it_makt FROM makt
    CLIENT SPECIFIED
    FOR ALL ENTRIES IN it_mat
    WHERE mandt EQ sy-mandt
      AND matnr = it_mat-matnr.
ENDIF.
SELECT werks name1 INTO TABLE it_t001w FROM t001w
CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
    MESSAGE i000(8i) WITH 'No Plant Found'(m02).
ENDIF.
SELECT lgort lgobe INTO TABLE it_t001l FROM t001l
CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
    MESSAGE i000(8i) WITH 'No Storage Location Found'(m03).
ENDIF.
ENDFORM.                    " f001_get_data
*&      Form field_cat
      text
--> p1        text
<-- p2        text
FORM field_cat .
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MBLNR'.
wa_fcat-key = 'X'.
wa_fcat-hotspot = 'X'.
wa_fcat-ref_fieldname = 'MBLNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material Doc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ZEILE'.
wa_fcat-ref_fieldname = 'ZEILE'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Item No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MJAHR'.
wa_fcat-ref_fieldname = 'MJAHR'.
wa_fcat-ref_tabname = 'MSEG'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BWART'.
wa_fcat-ref_fieldname = 'BWART'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Mvmt Type'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Document Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BUDAT'.
wa_fcat-ref_fieldname = 'BUDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Posting Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-ref_fieldname = 'MAKTX'.
wa_fcat-ref_tabname = 'MAKT'.
wa_fcat-seltext_m = 'Material Description'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFMG'.
wa_fcat-ref_fieldname = 'ERFMG'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFME'.
wa_fcat-ref_fieldname = 'ERFME'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Uom'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Supplying Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME1'.
wa_fcat-seltext_m = 'S.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGORT'.
wa_fcat-seltext_m = 'Supplying St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE'.
wa_fcat-seltext_m = 'Su.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMWRK'.
wa_fcat-seltext_m = 'Receiving Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME2'.
wa_fcat-seltext_m = 'R.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMLGO'.
wa_fcat-seltext_m = 'Receiving St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE1'.
wa_fcat-seltext_m = 'Re.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
ENDFORM.                    " field_cat
*&      Form process_data
      text
--> p1        text
<-- p2        text
FORM process_data .
LOOP AT it_mat.
    ztabix = sy-tabix.
    READ TABLE it_makt WITH KEY matnr = it_mat-matnr.
    IF sy-subrc = 0.
      it_mat-maktx = it_makt-maktx.
    ENDIF.
    IF it_mat-bwart+2(1) = '2'.
      it_mat-erfmg = - ( it_mat-erfmg ).
    ENDIF.
    READ TABLE it_t001w WITH KEY werks = it_mat-werks.
    IF sy-subrc = 0.
      it_mat-name1 = it_t001w-name1.
    ENDIF.
    READ TABLE it_t001w WITH KEY werks = it_mat-umwrk.
    IF sy-subrc = 0.
      it_mat-name2 = it_t001w-name1.
    ENDIF.
    READ TABLE it_t001l WITH KEY lgort = it_mat-lgort.
    IF sy-subrc = 0.
      it_mat-lgobe = it_t001l-lgobe.
    ENDIF.
    READ TABLE it_t001l WITH KEY lgort = it_mat-umlgo.
    IF sy-subrc = 0.
      it_mat-lgobe1 = it_t001l-lgobe.
    ENDIF.
    MODIFY it_mat INDEX ztabix .
ENDLOOP.
ENDFORM.                    " process_data
*&      Form display_data
      text
--> p1        text
<-- p2        text
FORM display_data .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
          I_INTERFACE_CHECK                 = ' '
          I_BYPASSING_BUFFER                = ' '
          I_BUFFER_ACTIVE                   = ' '
           i_callback_program                = l_repid
          I_CALLBACK_PF_STATUS_SET          = ' '
           i_callback_user_command           = 'LINE'
           i_callback_top_of_page            = 'TOP'
          I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
          I_CALLBACK_HTML_END_OF_LIST       = ' '
          I_STRUCTURE_NAME                  =
          I_BACKGROUND_ID                   = ' '
          I_GRID_TITLE                      =
          I_GRID_SETTINGS                   =
          IS_LAYOUT                         =
           it_fieldcat                       = it_fcat
          IT_EXCLUDING                      =
          IT_SPECIAL_GROUPS                 =
          IT_SORT                           =
          IT_FILTER                         =
          IS_SEL_HIDE                       =
          I_DEFAULT                         = 'X'
          I_SAVE                            = ' '
          IS_VARIANT                        =
          it_events                         =
          IT_EVENT_EXIT                     =
          IS_PRINT                          =
          IS_REPREP_ID                      =
          I_SCREEN_START_COLUMN             = 0
          I_SCREEN_START_LINE               = 0
          I_SCREEN_END_COLUMN               = 0
          I_SCREEN_END_LINE                 = 0
          IT_ALV_GRAPHICS                   =
          IT_HYPERLINK                      =
          IT_ADD_FIELDCAT                   =
          IT_EXCEPT_QINFO                   =
          I_HTML_HEIGHT_TOP                 =
          I_HTML_HEIGHT_END                 =
        IMPORTING
          E_EXIT_CAUSED_BY_CALLER           =
          ES_EXIT_CAUSED_BY_USER            =
          TABLES
            t_outtab                          = it_mat
        EXCEPTIONS
          PROGRAM_ERROR                     = 1
          OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_data
*&      Form TOP
      text
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = lh
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP

How to Convert frames into minutes and seconds

Similar Messages

Maybe you are looking for