How to convert regular database 10r2 to arabic

dear gurus i want convert the arabic support add in db as test enviornemnt
on production we have it as nls_characterset AR8ISO8859P6;
i try to follow these steps:
Step1 : connect sys@Database_Name as sysdba;
Step2 : shutdown immediate;
Step3 : startup mount;
Step4 : alter system enable restricted session;
Step5 : alter system set job_queue_processes=0;
Step6 : alter system set aq_tm_processes=0;
Step7 : alter database open;
Step8 : alter database Database_Name character set AR8ISO8859P6;
Step9 : alter database Database_Name national character set AR8ISO8859P6;
Step10 : shutdown immediate;
Step11 : startup;
on step no 8, it give me error like,
ERROR at line 1:
ORA-12712: new character set must be a superset of old character set
can any one advise me what i should do, as it is not converting.
thanks and kind regards in advanced
salim

dear sybrandb,
thanks, if this group is not free, then why you are typing and wasting the time to each others and groups who watch and read
it is very easy to write comments rather to come to practical real world propblems
i am your juiors and learning still as student, you are all of my gurus...please dont disheart anyone on groups as it is not the target purpose
we help to each others as much as we can, rest beyond our control wil not come to this group sir
thanks and appreciated,salim

Similar Messages

How to convert Foxpro database to oracle8i

hi everyone,
how to convert Foxpro database to oracle8i??? is there any utility\software for this purpose.
Thanks.
Kashif

Try these links
http://asktom.oracle.com/pls/ask/f?p=4950:8:214281309818024448::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:598423513078,
http://asktom.oracle.com/pls/ask/f?p=4950:8:214281309818024448::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:218213305850,
http://asktom.oracle.com/pls/ask/f?p=4950:8:214281309818024448::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:634823663936,

How to convert Oracle database to Sql server Database

Hi All,
I have one database made in the Oracle 8i, i want to convert that database to Sql Server Database,
Can anyone please give me the step by step process to do this conversion.
Regards
Ramesh Jha

Try using the DTS (data transformation services) services of SQL Server 2000
DTS is based on an OLE DB architecture that allows you to copy and transform data from a variety of data sources. For example: Oracle directly, using native OLE DB providers.
Alternatively, you could follow the following broad steps for data migration (assuming you are retaining the same table structures in SQL Server, and that you are talking about SQL Server 2000).
1. Get the CREATE scripts corresponding to each Oracle table / view / index. These can be reverse engineered from the database using a tool.
2. Map Oracle datatypes to SQL server datatypes e.g: date maps to datetime/smalldatetime, numeric maps to one of int, bigint, smallint, etc depending on the range of values in the CREATE scripts.
3. Indexes in SQL Server are of two types: Clustered / non-clustered. There can only be one clustered index on each table.
4. Converting procedures and triggers will have to be line by line, since SQL Server uses a proprietary T-SQL instead of ORacle's PL/SQL
I have yet to see a really good tool to do this migration, but it is possible to write a PL/SQL procedure / Pro*C program to automate the script creation for creating tables in the SQL Server database.
For the actual data import into SQL Server, export the Oracle data table by table into flat files, and then use the import wizard of SQL Server enterprise manager

How to convert Oracle database to XML standard?

I have a project to convert oracle database to XML standard.And get it to show in webpage.Please tell me for do it.Tell about the way to do it.Tell me some kit to do it.

Hi,
otn says like this
"You can use the XML SQL Utility to generate a DTD based on the schema of the underlying table being queried. You can use the generated DTD as input to the XML Class Generator for Java, which will generate a set of classes based on the DTD elements. You can then write Java code that use these classes to generate the infrastructure behind a web-based form. Based on this infrastructure, the web form will capture user data and create an XML document compatible with the database schema."
use 'mlsql utility'
regards
raghavan

How to convert appleworks database

How to use AppleWorks database in OSX 10.8.4?

Review these excellent articles:
1. Abandoning Appleworks by Roger Wilmut:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
or
2. Appleworks for the modern day, a migration tip by a brody:
https://discussions.apple.com/docs/DOC-2522
Do you have access to a Mac running Snow Leopard?
or,
Also you can run Appleworks 6.9.2 in Snow Leopard Server installed into Parallels 8 for use on your Mac running Mt. Lion:
[click on image to enlarge]

How to convert foxpro database to oracle9i database

hi,
i'm searching for solutions regarding to convert Foxpro database to oracle9i database.if it is possible pls give information regrading this topic.
hoping for help.
regrads
ramesh.

Hi Kashif
There is a tool which comes with Oracle 8.0.5 name "Microsft Access Tool Coverter to Oracle Database",
What u have to do simple 3 steps,
1-Just convert ur Foxpro dbfs to mdbs (Access Database) through "Microsft Access Tool Coverter to Oracle Database".
2-Then convert these mdbs (Access Database) to
Oracle datbase 8.0.5 through "Microsft Access Tool Coverter to Oracle Database".
3-Then Export ur users which is created automatically through the above tools during wizard and then import this user to Oracle 8i.
If u need further assistance then add me on MSN
[email protected]

How to convert English PSD document to Arabic type engine? help...

Right now we are making some English web files into Arabic.
We are using CS 6, and have enable the type engine and adjsuted all settings.
If I start a NEW document, I can copy and paste Arabic into Photoshop and it reads correctly.
However, if I copy and paste into a file made in English previously - even after setting it it to Middle-Eastern Features under Type menu, and changing type direction in the Paragraph menu...it doesn't paste in correctly (wrong character order)
Even if I make a new text box, with everything set, it still pastes in wrong.
However, if I first copy it into a new PSD document, with options set...it appears correctly, and then if I copy and paste that into the previously made English file, it shows up correctly.
Is there a way to "convert" a PSD document's recognized type engine besides having to use a "middle man" file as described above. I would really prefer to copy-paste from Word into the already exisiting English file without having to first copy-paste into a blank file. (Preferences are also set to Middle Eastern under Edit menu)
Thanks
EDIT: I figured out that if I draw a new box, it will paste in just fine. Would prefer to sue the text boxes that are there. I tried also "Reset Paragraph" and it seemed to sometimes, reorder things...however it also reordered the English that was sometimes mixed in.
Any thoughts?

Hi
Refer this thread [Convert MS Word .doc to PDF;
Regards
Raj

Convert english html pages to arabic

Hi ALL
How to convert english html pages to arabic.Is there any specific way to do this.
My idea is to
a)convert the static contents(english sentences) to arabic by typing in any text editor(save as html/jsp/....)
call the appropraite page depends on language.
b)Change the corresponding gif in arabic where ever needed
c)The dynamic contents(some data which may come from database) is converted by entering appropriate arabic characters in database.
4)Where ever there is few word changes(eg description,label etc) planning to put that in a properties file
with appropraite arabic characters.
Will the above points make sense.Or is there a specific or better way of doing this.
User will be opting english or arabic thro a link from website.
Can anybody help me on this. Thanks in advance Sarath

Here are a few resources that might help:
http://developer.java.sun.com/developer/technicalArticles/Intl/MultilingualJSP/
http://www.sun.com/developers/gadc/technicalpublications/articles/iws6.html
http://www.sun.com/developers/gadc/technicalpublications/articles/apache.html
Hope this helps,
John O'Conner

How can I convert a Database Handle from TestStand to LabVIEW?

I want to use a Database Handle (already created in TestStand by an Open Database step) in a LabVIEW-VI (called from TestStand) to connect it with the "Connection Reference" input of the "Easy SQL.vi"? If I use a directly connection via the "TestStand - Get Property Value (Number).vi" I get back the error message 4101 in LabVIEW. How can I convert the Database Handle?
Test Engineering
digades GmbH
www.digades.com

The TestStand database step types use the CVI SQL Toolkit to talk to databases. The handle that you are referencing is an internal memory location and not a actual handle that you can directly use. Currently as implemented the handle that is stored in a numeric TestStand property for the connection and the SQL statement are the handle values returned from the CVI SQL Toolkit. So for the connection handle, you could call the CVI SQL Toolkit function
DBGetConnectionAttribute (
int Connection_Handle,
tDBConnectionAttr Attribute,
void *Value);
and get the CVI CAObjHandle reference. With this you could then call the CVI ActiveX function
CA_GetInterfaceFromObjHandle(
CAObjHandle Object_Handle,
const IID *Interface_Id,
int Force_AddRef,
void *Inte
rface_Ptr,
int *Did_AddRef);
to get the actual ActiveX interface reference. This would have to be converted into a LabVIEW reference.
You may want to consider just using LabVIEW to open a new parallel reference only using the toolkit.
Scott Richardson
National Instruments

How to Convert Date to Month in Database which is pointing to EBS, Not DWH.

Hi Friends,
We are planning to create reports in OBIEE and the Source is EBS. That means, we don’t want to depends on Datawarehouse and Informatica and OBIApps. We just create some reports and they are pointing to EBS database.
For testing purpose, we have taken one HR Report and it containsthe below columns:
Month (Dim)
Revenue Per Employee Headcount (Fact)
Average Cost per Active Workforce Headcount (Fact)
In my little investigation, we found that Revenue column is coming from EBS: GL_BALANCES. And we configured W_Day_D base table in DAC as there is no Month column in EBS (Not sure).
*** Coming to my problem, how can I call Month column in my database pointed to EBS. How to convert Date to Month in my database.
I could be wrong but anyone please look into this issue.. How can I create columns for that exact OBI report in EBS database instead of DwH.
Thanks in Advance..
Raghu Nagadasari

Hi Veeresh,
You are right. Here, no need of using W_DAY_D table, but, we need all the stuff from the table and to explain my problem i have taken that table as an example. Now, we ran scripts for W_MONTH_D and W_DAY_D tables with EBS columns. So, we are getting data for the tables. In the same manner we have to create scripts for the below tables.
W_GL_ACCOUNT_D
W_GL_OTHER_F
W_STATUS_D
W_MCAL_DAY_D
W_EMPLOYMENT_STAT_CAT_D
W_WRKFC_BAL_A
W_DAY_D (Completed)
W_MONTH_D (Completed)
But, we are not aware of EBS Tables and their columns much. So, we are back tracing from RpD --> DAC --> Info --> EBS for each and every column and its taking much time.
So, if anyone of you facing the same issue, please share the EBS tables for the corresponding OBI tables, which are mentioned above.

HT5098 How can I read on my Apple Arabic files of Times New Roman or Arial in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the PC Windows files to my Apple?

How can I read on my Apple Arabic files of Times New Roman or Arial fonts made in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the Arabic PC Windows files to my Apple?
The same with email messages ,
And when I get Power Point files made in PC Windows, they are like PDF, not Power Point!
Anybody with a good suggestion?

Yewtree wrote:
when I get the files the Arabic letters are separate and not joined
Do not use MS Word for Mac, it does not support Arabic. Instead use Mellel, TextEdit, Nisus Writer or OpenOffice. Try the font Geeza Pro if others do not work.
What are you using to read email?
What are you using to read powerpoint?

How to convert Oracle charset database

I have a Oracle database which set charset "WE8ISO8859P1". how can I convert to "SJIS" charset that dont need create new database

You can't.
You can successfully convert an Oracle database's charset without database recreation if and only if 1) the original charset is a strict subset of the final charset (the letters in the set) and 2) the codepoints (the numbers that encode the letters) in the original charset don't change in the final charset and 3) all of the data in the database actually is encoded in the original charset (or at least is correctly encoded in the final charset). This is because this type of conversion is accomplished by simply slapping a new charest lable on the database as a whole; none of the binary values in the data get looked at, much less touched. If you "convert" a database and all three are not true, then some or all of your string data becomes complete and utter garbage.
For WE8ISO8859P1 to SJIS, both 1) and 2) are false.
3) becomes an issue because of what Oracle calls an optimization and I call a stupidity; when a database recieves string data from a client that asserts it's using the same charset, nothing checks that the data passed is actually in that charset; thus is it's trivially easy to get 8-bit data in a 7-bit US7ASCII database; it will read and write correctly until the day you try to convert to a superset of US7ASCII, such as UTF8. Then WHAM! Data corruption.
Oracle customers with support contracts can get a lot of documentation about character set conversions from the Metalink support site. Oracle also strongly recommends that customers file a support request for conversions (although someone who reads all the docs and understands character encoding and the NLS settings can muddle through on their own). Oracle also has lot of free documentation about globalization and character sets on the OTN site, which just requires a registration, but I'm not sure the nitty gritty details are there.
For non-subset conversions, the way to do it is to export the data, create a new database and import the data. Conversion to the new encoding will occur on import.
There is a utility, CSSCAN, that can be used to prepare for a conversion. It will scan the database for strings that will have difficulty converting.
Besides the possible issue of data that is outside of the original charset, it will also check for data that will be truncated on conversion. By default, the size specification of a VARCHAR2 in Oracle is the number of bytes; when a character is converted, it may expand the number of bytes that it requires, for example when switching form a 7 or 8 bit encoding to a 16 bit encoding. If enough characters in a value are expanded, the data exceeds the size of the column and is truncated or dropped (I forget). Recent Oracle versions lets you change from having the DB count size in bytes to counting size in characters; I don't yet know if this plays nice with imports with character set conversion (I'll know in a few months).

How to convert oracle 9i database to mysql using JSP?

Dear friends,
I want to convert oracle 9i database to mysql using JSP technology. Does there anyone who have a hint or some web links about this task? I searched the internet and found all of them are not free and no source code. In fact, what I want to do is really simple, I just want to first, reading the oracle database table structure information and then create the exactly same table in mysql, and then copying all the data in oracle database table to mysql table. But I don�t know how to retrieve the oracle table structure using JDBC. And also I want to retrieve all the tables in the oracle database, so I can choose from them to convert to mysql. It seems that the structure in oracle usually have the tablespace information, I don�t know if I can create database in mysql using this tablespace information. And I don�t know where I can find the information about the functions in JDBC? For example, how to retrieve the table structure? Once I retrieve the table structure and create the exactly same table structure in mysql, then I can fetch all the data in oracle table to mysql table.
Any hint will be great appreciated!
Merry Christmas and Happy new year!
Sammy

Hi, beattris and rtg54,
thank you very much for your great help!
beattris, do you know if there is any such kind of tool free? I am a student and don't want to do commercial product, as you see, my work is very simple, in fact, just as you said, the most important of all is how to get the database structure from oracle schema? do you have any idea about this? or do you know any tool that is open source? so I can learn from it.
rtg54, I just want to convert the database from oracle to mysql, after that, I can use mysql database as storage instead of expensive oracle database. the problem is that I have some data stored in oracle database and the application is built on oracle, after the convertion, I can use mysql to provide data to jsp or servlet application. I will great appreciate if you can contact with mysql about this problem because I don't know how to contact with them.
thanks again and happy new year!
Sammy

Can I convert call database to a printout? How?

Can I convert call database to a printout? How? From a Treo 680.
Post relates to: Treo 680 (Cingular)

www.treodesktop.com
Post relates to: None

How to convert logical standby database to Physical Standby Database

Hi,
Does anyone know how to convert logical standby database(10.2.0.3) to Physical Standby Database(10.2.0.3)? Is this possible? If so,please give me steps for it.
Thanks.
Regards,
RJ.

I don't believe this to be possible. One of the steps invloved in the creation of a logical standby is the following:
ALTER DATABASE OPEN RESETLOGS;
This makes the logical standby a different incarnation of the db from the primary.
A physical standby is a binary copy of a primary db, a logical standby is a completely seperate db that just happens to get sql statements applied to it that are generated from a primary db, but is open read/write.
One avenue, though would be if you had flashback database enabled and you flashed back all the way to when the db was a physical standby and then rolled forward with the archived redo logs.
It's somewhat unlikely you are in that situation, but that is a possibility.
Indeed the 11g snapshot standby does this sort of thing:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/manage_ps.htm#sthref740
jason.
http://jarneil.wordpress.com

How to convert regular database 10r2 to arabic

Similar Messages

Maybe you are looking for