How to convert select-options into parameters

hi Abapers,
i have an urgent requirement, iwant to know how to convert select-options into parameters
on selection screen,is it possible to do.

TABLES: spfli.
SELECTION-SCREEN BEGIN OF BLOCK test.
SELECT-OPTIONS:
s_carrid FOR spfli-carrid NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK test.
Greetings,
Blag.

Similar Messages

How to convert select-options table into single field internal table

Hi,
My requirement is to convert select-options table into single internal table which has one field.
e.g. select-options: s_matnr for mara-matnr.
       select-options table can have options 'BT',"EQ", "NE", "GE", "GT", "LE", "LT", "CP" etc. select-options table
       have   Sign:I ,Option:BT, Low: 1, High.10.The new internal table records should be 1,2,3,4,5,6,7,8,9,10.
Please suggest any function module available for this scenario in SAP.
Thanks,
Somi.
Edited by: somi reddy satti on Sep 15, 2009 3:18 PM

Hi Sowmya,
Here is the answer if I understand well of your question.
Data: begin of gt_mon OCCURS 0,
              mon(2)             TYPE n,
         end of gt_mon.
Data: begin of gt_year OCCURS 0,
              year(4)             TYPE n,
         end of gt_year.
Select-options: s_period       FOR ptdw_pws_db-kmonth NO-EXTENSION
                                                                                DEFAULT sy-datum(6)
                                                                                TO sy-datum(6).
For example according to above statement period is 201110 is 201201.
Period field does n't exists in SAP for selection. If your selection is on date based on period which is given on the selection-screen then you need to convert the period to date by concatenating ( or using FM to convert )01 at the end of each period . You need to declare one range table for date to select the data from table.
loop at s_period.
gr_date-sign   = s_period-sign.
gr_date-option = s_period-option.
COncatenate s_period-low
                      '01'
into gr_date-high.
COncatenate s_period-high
                       '01'
into gr_date-low
append gr_date.
ENDloop.
Thanks,
Satheesh

Convert Select-options into Parameter at runtime.

Dear Friends,
In my selection screen, i have declared select-option, now if i choose the radio button then select option shhould be work like parameter. It means without use of no inervals and no-extension in select option, it will work like no intervals and no-extension.
Can anybody suggest me that is it possible or not???
Thanking you,

HI Aakash,
Copy and paste the following code.
PARAMETERS:
          p_selopt RADIOBUTTON GROUP grp1 DEFAULT 'X' USER-COMMAND d001,
          p_parm RADIOBUTTON GROUP grp1.
SELECT-OPTIONS:
         s_date FOR sy-datum.
PARAMETERS :
p_date LIKE sy-datum.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-name CS 'P_DATE'.
      screen-invisible = '1'.
      screen-active = '0'.
      MODIFY SCREEN.
    ELSEIF screen-name CS 'S_DATE'.
      screen-invisible = '0'.
      screen-active = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN OUTPUT.
IF p_parm = 'X'.
    LOOP AT SCREEN.
      IF screen-name CS 'S_DATE'.
        screen-invisible = '1'.
        screen-active = '0'.
        MODIFY SCREEN.
      ELSEIF screen-name CS 'P_DATE'.
        screen-invisible = '0'.
        screen-active = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF p_selopt = 'X'.
    LOOP AT SCREEN.
      IF screen-name CS 'P_DATE'.
        screen-invisible = '1'.
        screen-active = '0'.
        MODIFY SCREEN.
      ELSEIF screen-name CS 'S_DATE'.
        screen-invisible = '0'.
        screen-active = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
Hope you got the required output.
Thanks,
Susmitha

How to convert a optionset into multi selection picklist in crm 2011 using javasacript??

hi,
where user want to select not only one but multiple value
from a pick list. I tried examples but it shows some errors.
How to do it??

Hey I meet a problème on my development see my result :
link : https://social.microsoft.com/Forums/getfile/652331
a multiple select list on my crm 2013 I do this process on this forum :
link : https://social.microsoft.com/Forums/en-US/2db47a59-165d-40c9-b995-6b3262b949eb/how-to-convert-a-optionset-into-multi-selection-picklist-in-crm-2011-using-javasacript?forum=crmdevelopment
my development :
// var_sc_optionset >> Provide schema-name for Option Set field
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// OSV >> Provide text field object which will store the multi selected values for Option Set
//Method to convert an optionset to multi select Option Set
function ConvertToMultiSelect(var_sc_optionset, var_sc_optionsetvalue, OS, OSV)
if( OS != null && OSV != null )
OS.style.display = "none";
Xrm.Page.getControl(var_sc_optionsetvalue).setVisible(false);
// Create a DIV container
// var addDiv = document.createElement("<div style='overflow-y:auto; color:#000000; height:160px; border:1px #6699cc solid; background-color:#ffffff;' />");
var addDiv = document.createElement("div");
addDiv.style.overflowY = "auto";
addDiv.style.height = "160px";
addDiv.style.border = "1px #6699cc solid";
addDiv.style.background = "#ffffff";
addDiv.style.color = "#000000";
OS.parentNode.appendChild(addDiv);
// Initialise checkbox controls
for( var i = 1; i < OS.options.length; i++ )
var pOption = OS.options[i];
if( !IsChecked( pOption.text , OS, OSV) ){
// var addInput = document.createElement("<input type='checkbox' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("style","border:none; width:25px; align:left;");
else {
// var addInput = document.createElement("<input type='checkbox' checked='checked' style='border:none; width:25px; align:left;' />" );
var addInput = document.createElement("input" );
addInput.setAttribute("type","checkbox");
addInput.setAttribute("checked","checked");
addInput.setAttribute("style","border:none; width:25px; align:left;");
// var addLabel = document.createElement( "<label />");
var addLabel = document.createElement( "label");
addLabel.innerText = pOption.text;
// var addBr = document.createElement( "<br />"); //it's a 'br' flag
var addBr = document.createElement( "br"); //it's a 'br' flag
OS.nextSibling.appendChild(addInput);
OS.nextSibling.appendChild(addLabel);
OS.nextSibling.appendChild(addBr);
///////Supported functions
// Check if it is selected
function IsChecked( pText , OS, OSV)
if(OSV.value != "")
var OSVT = OSV.value.split(";");
for( var i = 0; i < OSVT.length; i++ )
if( OSVT[i] == pText )
return true;
return false;
// var_sc_optionsetvalue >> Provide schema-name for field which will store the multi selected values for Option Set
// OS >> Provide Option Set field object
// Save the selected text, this field can also be used in Advanced Find
function OnSave(OS, var_sc_optionsetvalue)
var getInput = OS.nextSibling.getElementsByTagName("input");
var result = '';
for( var i = 0; i < getInput.length; i++ )
if( getInput[i].checked)
result += getInput[i].nextSibling.innerText + ";";
//save value
control = Xrm.Page.getControl(var_sc_optionsetvalue);
attribute = control.getAttribute();
attribute.setValue(result);
I have to do 2 field one is option list field and the second is textfield,
option list field : new_books
textfiled : new_picklistvalue
my js is on onload event see :
link : https://social.microsoft.com/Forums/getfile/652333
thanks you for you'r help

How to get all values in the range of select option into internal table?

Hi,
I need to capture all entries coming in the range of select option into one internal table.
How to do get that?
For E.g
select-options: matnr for mara-matnr.(select option)
IF I enter G0100013507892 as lower value of matnr and G0100014873947 as higher value
and if there are 10,000 materials in the above range, then I want to capture all theses 10000 materails in one internal table. How to do that?
Regards,
Mrunal

Hello Mrunal Mhaskar ,
What i understand you can do one thing go in debug mode
Try this code : -
LOOP AT s_matnr_ex.
IF s_matnr_ex-low IS NOT INITIAL.
    i_matnr-matnr = s_matnr_ex-low.
    i_matnr-option = s_matnr_ex-option.
    APPEND i_matnr.
    CLEAR : i_matnr.
ENDIF.
ENDLOOP.
LOOP AT s_matnr_ex.
IF s_matnr_ex-high IS NOT INITIAL.
    i_matnr-matnr = s_matnr_ex-high.
    i_matnr-option = s_matnr_ex-option.
    APPEND i_matnr.
    CLEAR : i_matnr.
ENDIF.
ENDLOOP.
In the i_matnr table high and low values are there.
Regards,
Vandana.

How to create a selection option or parameters in a subarea of the screen

Hi Experts,
    My program have a screen 1001 and it is splited into two parts: the first is a Subarea for selection option, and the last is a table control. Now I want to create some selection option and parameters in the first subarea just like we do in screen 1000. Do we have any convenient way to do that?
Thanks in advance
Joe

Hi Joe,
Yes ,it can be done like below code:
TABLES : mara.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr,
                s_matkl FOR mara-matkl,
                s_mtart FOR mara-mtart.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1001.
DATA: number(4) TYPE n VALUE '1001'.
START-OF-SELECTION.
CALL SCREEN 100.
in screen flow logic .write below statements.
first declare the subscreen area 'AREA' in screen.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
CALL SUBSCREEN area.
MODULE USER_COMMAND_0100.
Reward if useful,
Regards,
Talwinder

Select-options and parameters

hi,
In How many ways we can define select-options and parameters.

hi uday,
Usually we use PARAMETERS for single value input and
SELECT-OPTIONS is used to give a range of input values for a single field
SELECT-OPTIONS implicitly consists of internal table with fields
OPTIONS
LOW
HIGH
SIGN
eg:
      DATA: G_VBELN TYPE VBAK-VBELN.
      SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
      PARAMETERS : P_VBELN LIKE VBAK-VBELN.
      SELECT-OPTIONS: S_VBELN FOR G_VBELN.
      SELECTION-SCREEN END OF BLOCK B1.
   o/p:
          P_VBELN: _________________.
         S_VBELN:___________ TO ____________.
reward if helpful
regards.
shashikanth naram.

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

How to use select options whitout ranges ie like parameter

how to use select options whitout ranges ie like parameter and pls send me the code on that
thanks
raja.

hi,
SELECT-OPTIONS : s_kunnr for kna1-kunnr <b>no intervels.</b>
eg: code
<b>SELECT-OPTIONS : s_kunnr for kna1-kunnr <b>no intervels.</b></b>
data: itab type table of kna1 with header line.
select * from kna1 into table itab where kunnr IN s_kunnr.
rgds
Anver

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How will use Select-Options in Read table Concept.

Hi All,
              How will use Select-Options in Read table. For example,
      Select-Options : test for bseg-prctr.
       Select * from bseg into table ITAB.
Read table ITAB with key prctr in test.
Last line is showing error. If any way to read ITAB as conditions given per select options.
Thankx Advance,,,

HI,
you cannot use " IN " with read statement , read statement is used as:
READ TABLE it_collect ASSIGNING <fs_collect>
                  WITH KEY   rbpl = <fs_wkdet>-arbpl
                             ufnr = <fs_wkdet>-aufnr.
anyways you can use loop at statement before read to use " into " statement as:
LOOP AT it_master INTO l_master
                                       WHERE werks       = l_werks
hope it will help you
regards
rahul
Edited by: RAHUL SHARMA on Dec 30, 2008 9:14 AM

HI major diffrence in select-options and parameters

Hi,
Can any one explain me the major diffrence between select options and parameters.
I know that in select options we can give a range of values and in parameter one value.
Thanks

Hello Hari,
I would see following differences:
1. As you have mentioned, many values/ranges can be given in the SELECT-OPTIONS. However, the parameter can hold only one value.
2. In the run time, we see the data w.r.t a select option as an Internal table and Parameter may be accessed as a global variable.
3. Consider following statements:
a. select-options: s_matnr for mara-matnr no-extension no intervals.
b. parameters: P_MATNR like mara-matnr.
Both the statements look same on the selection screen.
consider the SQLs:
<b>select * into corresponding fields of table g_t_mara
from mara
where
matnr in s_matnr.</b>
and
<b>select * into corresponding fields of table g_t_mara
from mara
where
matnr eq p_matnr.</b>
both the SQLs give the same output if the user gives a material number on Selection screen.
If the user does NOT give any input in selection screen, the first SQL will fetch all data from DB, whereas the SQL with the PARAMETER will fail.
So I think we should keep in mind the requirement and code accordingly.
I hope this helps you.
Best Regards,
Murugesh AS

How to transfer select options variable

Hello:
I can pass parameter to parameter id such as p_fikrs, but how to transfer select options parameter to parameter id such s_fictr.
SET PARAMETER ID 'FIK' FIELD p_fikrs.
SET PARAMETER ID 'FIS' FIELD s_fictr.
SET PARAMETER ID 'FPS' FIELD s_fipex.
SET PARAMETER ID 'GJR' FIELD p_year.
CALL TRANSACTION 'FMRP_RFFMEP1BX' AND SKIP FIRST SCREEN.
Thank you very much!

Use SUBMIT with the following option
SUBMIT... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Hope dis helps,
Reward if it does

How to convert table content into html format?

Hi,
Experts,
How to convert internal data into HTML format is there any function module or piece of code to download content into HTML.
Thank u,
Shabeer Ahmed.

Then use this code....
REPORT ytest_table_html1.
*        D A T A   D E C L A R A T I O N
*-HTML Table
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
                                       " Html Table
*- Declare Internal table and Fieldcatalog
it_flight TYPE STANDARD TABLE OF sflight WITH HEADER LINE,
                                       " Flights Details
it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
                                       " Fieldcatalog
*-Variables
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
*        S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
SELECT *
    FROM sflight
    INTO TABLE it_flight
    UP TO 20 ROWS.
*        E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and Properties
* Field catalog is used to populate the Headings and Values of
* The table cells dynamically
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'SFLIGHT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2.
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>Flights Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
    CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
        it_fcat-scrtext_l
        '</th>' INTO t_html-line.
    APPEND t_html.
    CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT it_flight.
    t_html-line = '<tr>'.
    APPEND t_html.
    CLEAR t_html.
*-Populate entire row of HTML table Dynamically
*-With the Help of Fieldcatalog.
    DO v_lines TIMES.
      READ TABLE it_fcat INDEX sy-index.
      CONCATENATE 'IT_FLIGHT-' it_fcat-fieldname INTO v_field.
      ASSIGN (v_field) TO <fs>.
      t_html-line = '<td>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = <fs>.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '</td>'.
      APPEND t_html.
      CLEAR t_html.
      CLEAR v_field.
      UNASSIGN <fs>.
    ENDDO.
    t_html-line = '</tr>'.
    APPEND t_html.
    CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.
*-Download the HTML into frontend
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'C:\Flights.htm'
    TABLES
      data_tab                = t_html
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-Display the HTML file
CALL METHOD cl_gui_frontend_services=>execute
    EXPORTING
      document               = 'C:\Flights.htm'
      operation              = 'OPEN'
    EXCEPTIONS
      cntl_error             = 1
      error_no_gui           = 2
      bad_parameter          = 3
      file_not_found         = 4
      path_not_found         = 5
      file_extension_unknown = 6
      error_execute_failed   = 7
      synchronous_failed     = 8
      not_supported_by_gui   = 9
      OTHERS                 = 10.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
none of the above function modules r obsolete...

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.

@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

How to convert select-options into parameters

Similar Messages

Maybe you are looking for