How to copy one Analysis/Report in Business Model A to Business Model B?

I have created a Business Model, Presentation layer in my RPD. I have many subsequent reports/analysis for that BM. Now, i have created a second BM/Presentation layer, in the same RPD, which uses a new set of identical tables (columns and table names, etc... all the same, but different data). So, without re-created each report in Analysis, i just want to copy some of those reports/analysis so they will use my 2nd BM instead of the first. Can this be done, and how?
Edited by: user12602240 on Mar 31, 2012 11:50 AM

I'm retracting my comments for now -- this may be due to a column ALIAS which isn't present.
I will re-post after I investigate that a bit.
--- Original ---
Kalyan,
Not sure if you had any difficulties in this method. When i try it, i get the following error below. I've checked my names - the names "Periods" and "PERIOD_ID" are identical in both my subject areas. They refer back to aliased tables which ultimately point back to the same physical table. It's unclear to me why i am getting the unresolved column error, but i'm still trying to sort that out.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Location: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threads
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27005] Unresolved column: "Periods"."PERIOD_ID". (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Periods"."PERIOD_ID" FROM "BM11_Current"')}
SQL Issued: SELECT "Periods"."PERIOD_ID" FROM "BM11_Current"
Edited by: user12602240 on Apr 10, 2012 5:21 PM

Similar Messages

How to Develop the ABAP Reports in Business One

HI all;
am New to SAP Business One,
How to Develop the Z Reports in Business One ? like Normal ALV Reports and other??
Can we have the ABAP Editor and Other Transaction in Business One.
-Ravi

Hi Sharma,
Thanks for Your Replay,
This is what my requirement !.
Hi Experts,
Here we are integrating SAP Business One with 3rd Party tool. !!
We need to Develop Customize Report in Business one and These Reports Out Put Will Convert into XML Files (Third Party System Can Understand Only XML files) and stored in Application Server/ Presentation Server.
How to Develop the u2018Z/Yu2019 Reports in Business one ? Can we use SE38 (R/3 ABAP Editor and other T-codes) in Business One.? Or is there any tools to develop the Business One Reports ? How to Convert the Report out put into XML File?
Thanks,
Upender.

How to build a Analysis report in OBIEE 11g

Hi All,
I have a query regarding 'How to' to build an analysis report in OBIEE 11g.
The data model is a financial data model, where information such as Actual, Plan, Forecast, What - if etc for current AND prior year need to be displayed in a dashboard.
I created two analysis reports one for current year Rep1 and second for prior year Rep2 each with filter criteria as current year and prior year respectively based on years column. and then in the dashboard I created prompt based on scenario column (radio button) for Actual, plan, Forecast, and wht if.
I am able to show the current vs prior year data in the same dashboard for Actual or Plan or forecast or what if (depending on data availability in the database).
I want to achieve the same information in a single analysis report instead of two separate analysis reports. I do not want to create separate physical report for current and prior year data.
I need one analysis report which I can use in dashboard and depending on selection for scenario (actual , plan, forecast or wht if) I want to show the current AND prior year data the way I achieved in with two seperate reports embedded in their respective sections as explained above.
Does any one have idea how to achive this by building single analysis report?
If you need any more clarificaiton or have any queries, please let me know.
Thanks and Regards
Santosh

As per I understand your requirement,
In your Dashboard create a Presentation variable which receives the value of year you select.
Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
Create a filter on Year column and convert it into SQL. Put the condition as:
"Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
You will get the result for selected year and the previous year.
Hope it helps..
Regards,
A.K.

How to copy one column BLOB value into another column of another database.

How to copy one column BLOB value into another column of another database.
BLOB value contains word document.
I thought of copy the BLOB value into a text file and then update the new column value by the same text in textfile. Will this work?
Is there any other better way to do this?

You're welcome
BLOB fields contains binary data. I don't think you can do this
Also if I view the BLOB as text. Can I copy it and insert into the new database.
I think your options are as I said. Datapump or CTAS
Best Regards

How to copy one request to another request

Hi all,
How to copy one request to another new request?
I have a released workbench request in which it has around 1200 Objects (including data elements, domains, programs and many more), now i need to copy all these objects into a new request.
I can do this by SE03 (Include Objects in a Transport Request ) transaction, but it is a lengthy process.
Is there any way to copy directly in one go.
Plz help...
Regards,
Satish Reddy D.

Hi,
The thing is like this....
i have a released request in which we have more than 1200 objects, in that i dont need 10 objects.
so when i create it as copy of transport request, i just deleted those 10 objects and saved.
Now, if i transport the new request how many objects will go? 1200 or 1190?
in the new request i am getting the old request under Comment: Object List Included.
is it necessary to transport the old request?
i need to transport only 1190 objects.
Regards,
Satish Reddy.
Edited by: Sathish Reddy on Jan 28, 2010 2:18 PM

How to copy one month to several months in journal

Hi all
how to copy one month to across months using single selection. right now i can do month over by month in journal.
any thoughts and suggestions will be highly appreciated
thanks
Ramana

Hi,
The easiest approach to this can be the use of script logic.

How to publish a Crystal Report in Business One

Hi
Please can anyone tell me how I publish a Crystal report (which is now inbuilt in SAP B1) so it is available to all users? I have full administrator/manager user rights. I have so far created the report and saved it to my SAP server machine on it's C:drive.
Thank you very much for any help and info.
Matt

Hi, I worked out how to do it. I had to first enable the Crystal Add on from within SAP and then open the Crystal Reports Administration menu under Administration and then select "Manage Crystal Reports". From there you can browse to the report you have created and select the module for where you want it to appear under in SAP.
Edited by: matth76 on Jun 25, 2009 4:14 PM

How to copy sap standatd report to add fields and to make it work

Hi experts,
Can you tell me how to copy the sap standard report to add fields.
I copied regular way including all includes also, but the porgram not activated and also every field started with %
exp : data %dtab type standard table of /1BCDWB/IQ000000008078 with header line.
Thanks

Local object yes.
I realise you're not an abaper, but if you got one in, he could simply create a subclass of /SAPPSSRM/CL_FY_NUMBER (assuming it's not been made final) and override only the method that needs changing. ( if it is final, then you have to use composition, but again, that's pretty straight forward ). The point is, that copy a class rarely, if ever, needs to be done. That's one of the major points about using classes. If you use subclassing or composition, only small amounts of code need to be copied - which means if SAP change other bits in a new release, you automatically get them, thereby reducing the risk of an upgrade mucking up your cloned class.
I'd be extremely nervous about having any code that had been implemented by a non-developer, being put into productive use.
matt

How to get one crystal report to work with two different backends?

We have a software that can work with either SQL2008 or Visual Fox Pro backend. We are trying to compile One Crystal report that will work with either of the two backends. How to you make sure that your Crystal Report is compiled so that it will work with both backends?
Right now my reports were originally created using the SQL2008 backend and are retaining the DBO reference in the statement, which then will not allow the Crystal report to work with the VFP backend.

You can write your data sets as a command using hand coded SQL. As long as "dbo" is the only schema used in your SQL Server database, you don't need to specify it in the SQL. SQL Server will automatically assume the dbo.
The 2nd thing... The SQL needs to be 100% compatible with both SQL Server 2008 AND VFP. This will limit the list available functions to those that are common to both platforms AND work exactly the same in both platforms.
The other part is to make sure you are using an ODBC type connection instead of OLD/DB. That way all of the connection properties are set on the local machine and the report is simply looking for the System DSN name.
HTH,
Jason

How to copy standard SAP report to a Z report?

Hi All,
Guys, I have a requirement to copy an standard SAP report and make some changes to it. Please let me know how to copy a standard SAP report as a Z report. Is there any simple way or will I have to open the source code and copy it into the new Z program? If that is the case, how will I copy the screens and related PBO/PAI events?
Please provide me a step-by-step solution.
Thanks & Regards,
Madhur

Hello Madhur,
As Raja had said, yuo could just copy the program from SE38. But just remember a few points:
1. If the standard report is being used in some other programs, then there's no way you can make your Z-report get used in all such instances. I suspect that you may not want to do that anyways, but just in case.
2. Just also check out if the standard report you're talking about has any INCLUDE programs within it. If there are too many standard INCLUDEs in the main report, then you might have to decide whether you need to copy all of them too, or let them be as they are.
3. You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
I have experienced some problems with respect to the second and third points in the past, so it is worth it to be a bit careful.
Regards,
Anand Mandalika.
Regards,
Anand Mandalika.

How to copy one IDoc type

Hi guys!
I need to copy one idoc type with Z extension to another R/3 system. How to do it?
Thank you!
Olian

Hi,
You can transport the IDoc Type to higher boxes.
But I could not able to find anything download and upload option.
a®

How to copy one schema into another

I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
I have a dmp file of source-schema (created daily with expdp by our backup schedule).
Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
The dmp file was created with:
expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
Create the copy on dest-schema with:
impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
(dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
If this approach is not feasible, kindly suggest me an alternative.
Thank you.
Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)

Thank you both. Dean, I've made a note of your proposed command. May use it next time.
In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
First I ran these command logged in as SYS
GRANT Import Full Database TO dest-schema;
GRANT Create Any Directory TO dest-schema;
GRANT Unlimited Tablespace TO dest-schema;
impdp
dest-schema/pwd
DIRECTORY=dmpdir
DUMPFILE=myproject.dmp
REMAP_SCHEMA=source-schema:dest-schema
TABLE_EXISTS_ACTION=REPLACE
LOGFILE=implog.log
There were some errors though. The import process complained about constraints referencing non-existent primary keys.
It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
- are not part of the DUMP file
or
- are in the DUMP file but skipped during import
Don't know if this is a bug or by design behavior.

How to Copy one CD to another CD

Hi: I want to copy a non-copyrighted music CD to a blank CD to that I can have a CD copy of the original music CD.
I have a Mac Mini Intel, Solo, 1.5GZ, Running Tiger 10.4.11, which I upgraded to 2Gigs of ram.
I know there must be an easy way to copy one music CD to a blank CD, but for the life of me I can't figure it out. Thanks very much. Jerry.

Thanks so much, Fortuny and Awfers. I haven't had a chance to use SimplyBurns yet and I plan to try it, but I was able to import the CD into ITunes and follow the directions Awfers gave. I really appreciate your help. Best wishes, Jerry.

How to copy existing query report into new query report in SQ00

Hi Experts,
Hi Experts,
I want to add fields "company code" "'region" to existing query report AQZZ/SAPQUERY/FKF1============
(list of vendor address) for this i done as following:
1.In SQ01 go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
2.I typed F1 in query field and click change button
3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing query report into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK i am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
please help regarding this which should be very beneficiary to my carrier.
Regards,
naresh

Hi Experts ,
I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
Regards,
naresh.

How to convert Bex Analyser report into normal MS Excel sheet

Hi,
I created query in Bex Analyser. Now, I want to send this copy as a normal MS Excel document through mail.
When I tried save as and send a copy, It is showing the filter,table, information buttons and appearing same as bex report. I would like to see normal excel sheet when it opens.
Is there any way except copy & paste.
Any help would be appreciated.
Thanks,
Aparna.

Hi Chandu,
I followed same procedure as you said. I created one node for SMTP in SAP connect:Administration(SCOT).
I gave destination as RFC destination -> BWDCLNT -> Internet -> enter mail address...etc as per system requirements.
Once I executed, It is showing "No message sent". Did I miss any steps to follow...
Can you give me step by step procedure to follow.
In our Bex tools, Only Broadcaster was disabled. If I configure mail server, may be it enable?
Your help would be appreciated.
Thanks,
Aparna.

How to copy one Analysis/Report in Business Model A to Business Model B?

Similar Messages

Maybe you are looking for