How to create a activex control to execute cmd.exe with parameters?

Hi,
Is there any way to execute a cmd.exe on client side using activex.
currently i am using vs-2013
Please help i have no idea about activex control.
Pawan

No, there is certainly no server side setting that will allow you to do this. Please refer to the following links for more information:
http://stackoverflow.com/questions/1791511/run-exe-from-client-side
http://stackoverflow.com/questions/5787200/how-to-open-command-prompt-from-my-application-client-side
http://p2p.wrox.com/javascript-how/24362-how-call-shell-cmd-open-exe-clientside.html
Please remember to mark helpful posts as answer and/or helpful.

Similar Messages

  • How to create a table control in Business HTML??

    Hi All,
    I dont have much knowledge about Business HTML. Can anyone tell me how to create a table control. The requirement is to accept two fields from user and then on click of a button get these values populated on a table control. Can u pls help me out on this??
    Also to create the table, I tried using SAPTemplateTableBegin()functions, but using these functions gives me an error. Is the because the standard SAP template files does not exist or what??

    Hi Raja,
    My first approach was the same as u said but the issue is when i try to generate a template i.e. (system generated template), the generated template uses standard TemplateLibraryDHTML.html functions like `SAP_TemplateHeader()`
    `SAP_BodyContentBegin()`
    `SAP_FormBegin()`
    The above all is not supported in our client's ITS and so we have to manually create a table control using the step loop functions in DHTML and correspondingly FIELD-SET in ABAP.
    We could successfully do this but as i mentioned in my previous message, we still have to make the table entries editable and refresh the internal table when the values in the table are changed.
    Pls help!!
    Rgds,
    Swapna.

  • How to install the ActiveX control

    hi Can some one help and tell how to install the ActiveX control.
    Thanks

    ActiveX runs on Internet Explorer. Which in turn only runs on Windows computers.
    So NO, we can't.

  • How to create a password file for executing psadmin command to deploy portl

    how to create a password file for executing psadmin command to deploy portlet

    What you have done is perfectly right. The password file doesn't have anything else apart from the password
    for example in your case
    $echo password > /tmp/password.txt
    However I remember that in windows install, the Application server used to wait for a user's input when a deploy was to be done for the first time. So Can you read the Release notes or the Readme file which has come with windows.
    The solution was,
    manually use asadmin command of application server to deploy some war (any webapp will do), at this time, a question will be prompted to accept a certificate. once this is done, deploy portlet should work fine!!!
    HTH

  • How can i use activeX Control in labview?

    how can i use activeX Control in labview?
    please describe me step by step.
    thanks.

    Well..that was quite helpful..but now I'm encountering certain problems. I've attached the VI I've made.
    I don't need sound at the moment so I dropped it. (Although I tried to play it..but all I could hear was a very annoying sound.) Secondly I don't want to display any date or time..so i dropped that property too.
    Now when I run this Vi...the webcam turns on, the screen of videocapx pops up..then the webcam light goes off..and another pop up appears saying..labview is not responding..and i have to close it reluctantly.
    I haven't placed the stop capture property in this vi. i checked it by placing it too..but that doesn't work.
    I would like to notify that my actual task is to acquire image and then compare it with another one already present on my pc. I want you to please help me out..solve my first query then I'll proceed with the latter part.
    Attachments:
    activexvideocaps.vi ‏20 KB

  • How to create user group for EIS (Executive Information System) KCBA

    Dear Experts,
    How to create user group for EIS (Executive Information System)
    TCode KCBA
    Regards
    Saurabh

    Hi ,
    Check the below link ,hope it will give some inputs for creating groups.
    http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
    Regards
    udayakumar.k

  • Cannot create an activex control?

    I successfully created a bean for the following code but am unable to use the activex bridge to create an activex control..it gives an error kindly help me out
    /*Abhi1.java*/
    import java.awt.*;
    import java.io.File;
    import java.io.*;
    import javax.xml.parsers.*;
    import org.w3c.dom.*;
    import org.xml.sax.*;
    public class Abhi1 implements Serializable{
         File f;
         DocumentBuilder builder;
         Document doc;
         DocumentBuilderFactory factory;
         public Abhi1()
              DocumentBuilderFactory factory=DocumentBuilderFactory.newInstance();
         public void setpar(String fname)
              //DocumentBuilderFactory factory=DocumentBuilderFactory.newInstance();
              try
              f=new File(fname);
              builder=factory.newDocumentBuilder();
              doc=builder.parse(f);
              //System.out.println(doc.getDocumentElement().getTagName());
              catch(Exception n)
         public String getpar()
              return (doc.getDocumentElement().getTagName()+" ");
    }

    Hello - 
    Thanks for reporting this, it's been reported as a bug with ID 238634.  Unfortunately, there is no clean workaround available at this time.
    NickB
    National Instruments

  • How to create Dynamic Table Control

    Hi
    How to create Dynamic Table control , The field names and values to be displayed in table control are to be fetched from Add-on Tables.
    Regards
    Prasath

    Hi Jonathan,
    Actually the columns to be displayed are not constant . It will be increased based on the database values, Anyhow it will not exceed 100.
    Please confirm my understanding.
    1. In this case I have to create 100 custom columns and make it visible / invisible based on my requirement and I can set the title at runtime.
    2. How can i assosicate / reassociate the datadictionary reference for the columns that i use. Because I need to show the search help values for the
    dynamic columns.
    Your opinion on this will be helpful.
    Regards
    Prasath

  • How to create the composite control with textinput,button and grid.

    I have created the application having two Textinput  and three button and a DataGrid.
    1. on click of first button next to "select a value" , a DataGrid will be open.
    and i am using all the functionality of DataGrid.
    2. now by using all of these control i have required to create single composite control.
    plz help me how to create this composite control.

    Right click the graph and select Create>Property Node. On the diagram, find the property node, right click it and first select Change All to Write. Right click again and if you select Properties, you will see a list of all the available properties for the graph. The properties you want are XScale.Minimum, XScale.Maximum, XScale.Increment, YScale.Minimum, YScaleMaximum, and YScale.Increment. You can grow the single property node to have as many properties that you want. Once you have all the properties created, create front panel controls and wire them to the property node. See the attached picture.
    Attachments:
    graph_properties.jpg ‏16 KB

  • How to create tables for control data

    HI
    How to create  tables for controls of types of data (screen control)? what is the process for this
    Regards,
    Anil

    Well, do you want to do it the easy way?  If so, then just create a table maintenance program.  You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30. 
    If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen.  You can use the table control wizard to help you along.
    Regards,
    Rich Heilman

  • How does labVIEW use ActiveX controls?

    How does labVIEW use activeX controls?
    I recently wrote an activeX control in VB and noticed that it would not work if the control was set so that its properties could not be set in ambient mode. This may suggest that labVIEW uses some activeX controls only in ambient mode.
    Is this the case or are there more complexities?

    Dan,
    Which version of LabVIEW do you have?
    As per the KnowledgeBase bellow, in versions of LabVIEW prior to 5.1 you would get errors accessing the ambient properties.
    ActiveX Controls in LabVIEW 5.0.1 Containers Cannot Access Ambient Property
    Do your controls use the Ambient.UserMode to determine when the control is being used in a development environment? When embedding ActiveX controls into a container on the front panel, by default, the ActiveX control generates and responds to events, i.e. it is running, even when LabVIEW is in edit mode.
    Right-click an ActiveX container and select Advanced»Design Mode from the shortcut menu to display the container
    in design mode while you edit the VI. In design mode, events are not generated and event procedures do not run. The default mode is run mode, where you interact with the object as a user would.
    Information can be found in the LabVIEW help files
    Zvezdana S.

  • HT201210 how do i allow ActiveX control to allow itunes to update

    How do I allow ActiveX control, i need to do this as itunes will not run

    Via iTunes on your computer.

  • How to write a shell script to execute a procedure with out parameter

    Hi,
    How to write a shell script to execute a procedure with out parameter.
    here is my procedure
    PROCEDURE sample(invar1 VARCHAR2,
    invar2 VARCHAR2,
    invar3 VARCHAR2,
    invar4 VARCHAR2,
    ecode out number);
    Any example really helpfull
    Thanks in advance

    Or if we're passing values in, maybe something like:
    Test procedure:
    CREATE OR REPLACE PROCEDURE p (myin IN VARCHAR2, myout OUT VARCHAR2)
    AS
    BEGIN
        myout :=
            CASE myin
                WHEN 'A' THEN 'APPLE'
                WHEN 'B' THEN 'BANANA'
                ELSE 'STARFRUIT'
            END;
    END;Shell script:
    #!/bin/bash
    my_shell_variable=$1
    unset ORACLE_PATH
    sqlplus -s un/pw@db <<-EOF
    set feedback off pause off
    set pagesize 0
    set autoprint off
    VAR out varchar2(30)
    VAR myin varchar2(30)
    exec :myin := '${my_shell_variable}'
    BEGIN
      p(:myin, :out);
    END;
    print out
    exit
    EOFTest:
    /Users/williamr: xx A
    APPLE
    /Users/williamr: xx B
    BANANA
    /Users/williamr: xx
    STARFRUITObviously in a real script you would not hardcode the password or let it show in a "ps" listing.
    Message was edited by:
    William Robertson

  • ADF how can i execute a query with parameters when the page renders

    hi
    i am using ADF web 11g
    i need to execute a query with parameters when the page renders
    thanks

    hello,
    I'm a fan of Java code, I really am.
    But when you use ADF, you decided to move to a more declarative environment.
    So why not do it declarative, the adf way?
    In your pagedef insert a action binding.
    This can be anything, a call to the application module, a call on the iterator(Like executeWithparams, etc.)
    Create an invokeAction in your pagedef and set the condition.
    This example refreshes(Action 2 is execute query) the data.
    First the method binding:
        <action IterBinding="PersoonIterator" id="Execute" InstanceName="LSAppModuleDataControl.Persoon"
                DataControl="LSAppModuleDataControl" RequiresUpdateModel="true" Action="2"/>And the invoke action
        <invokeAction Binds="Execute" id="refreshData"/>This always refreshes the data on page entry, but anything is possible, you can set condictions for the invokeAction.
    -Anton
    PS Yes I know that pagedefs become backing beans in the end and yes that is Java code, but if you wanna play the ADF way, the goal is the reduction of Java code and the increased performance of declarative programming.

  • How to create a transaction code for a function group with screen 100 as st

    Hello ,
    I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
    Customer asked me to create a transaction with the screen 100 as the starting screen.
    Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
    [ It is not a module pool program ].
    Thanks
    Prashanth.
    Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
    Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

    Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
    Name of screen field:                               Value
    D_SREPOVARI-REPORTTYPE                RW
    D_SREPOVARI-REPORT                        ZPCA
    Save and transport accordingly.

Maybe you are looking for