How to create a Book in Indesign and add indesign documents to it?

Hi all,
Can I create a book in InDesign CS3 and add indesign documents to it using javascript.
Thanks,
Hemachandiran.

Here's my version of the script — now works in CS4 — may be it would come in handy to somebody:
var myFolder = Folder.selectDialog( "Select a folder with InDesign files" );
if ( myFolder != null ) {
     var myFiles = [];
     var myAllFilesList = myFolder.getFiles();
     for (var f = 0; f < myAllFilesList.length; f++) {
          var myFile = myAllFilesList[f];
          if (myFile instanceof File && myFile.name.match(/\.indd$/i)) {
               myFiles.push(myFile);
     if ( myFiles.length > 0 ) {
          var myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
          myBookFile = new File( myBookFileName );
          if ( myBookFile.exists ) {
               if ( app.books.item(myFolder.displayName + ".indb") == null ) {
                    myBook = app.open( myBookFile );
          else {
                myBook = app.books.add( myBookFile );
                myBook.automaticPagination = false;
                for ( i=0; i < myFiles.length; i++ ) {
                    myBook.bookContents.add( myFiles[i] );
                myBook.save( );

Similar Messages

  • How to create a new cell attribute and add adorner to the cell

    Hi
    I am relatively new to InDesign and wanted to do the following
    I want to add a new boolean attribute to a selected table cell. When this attribute is set, I would want to draw one line vertical and one line across the selected cell ( kind of like a "Plus" sign over the cell). I am wondering how to go about doing this.
    PS: I read the snippet snpManipulateTableStyle and can see how to change a cell style using existing attribute (kcellAttrFillColorBoss). However in my case, i want to create a entirely new boolean attribute and based on it being true or false, I would want to draw the adornment on the cell
    Any help with this would be greatly appreciated..
    thanks!
    Sam

    I would create the new site first, then promote the new domain controllers and add them to the site. You can do this during the dc promote process.
    There's step by step guides already available for creating a site so I don't see any point reinventing one.
    Here's one:
    http://www.petri.co.il/create-active-directory-sites-windows-server.htm
    You may have to adjust the site links part since it looks like Site 3 will only be linked to Site 1.
    Of course, the IP addresses for the domain controllers in Site 3 have to be in the IP subnet configured for that site.
    Using the example above, you'll of course have to enter the information that makes sense for your netwrok.
    I doubt anyone will create a custom step by step for you using the information you provided  (they'd also have to know your subnets for one thing) but then, who knows. 
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • How to create a bapi to update and add record 2 abap r3 table created by me

    i have created a abap r3 table and i now want to insert records into it through SAP netweaver(Web-Dynpro). So i need a bapi to udate and insert records in the abap r3 table.if someone can please tell me how to create the bapi..coz i handel the EP part and dont know much about abap.

    BAPIs are defined as API methods of SAP business object types.
    A BAPI is implemented as a function module, that is stored and described in the Function Builder.
    To create BAPI you are supposed to do following steps :
    1) create package in SE80.
    2) create function group in SE80.
    3) create function module in SE37(REMOTE ENABLE) & relased it .
           write your logic in that FM.
    4) Go in SWO1 to create Object type /  object name (write the program name which is SE38 program generated in background )
    5) Then go to SWO1
          Utilities -> Api methods -> ADD method
             write the name of FM which you have created & continue.
    6) select your method
      a) EDIT -> change release status -> object type -> implement
                                                                           -> released
      b) EDIT -> change release status -> object type  component-> implement
                                                                           -> released
    7) go in BAPI & you will get your BAPI.

  • How to create a booking table (make online reservation)

    Hi everyone,
    I'm just wondering if any of you know how to create a booking
    table, like a booking seat for an airplane... I have to do the
    booking table as I'm doing a Japanese Restaurant website for my
    project.. At the moment, I'm using PHP, MySQL and HTML..
    Could anyone help me, please?
    Cheers,
    Nova

    You first need to check with your host to see which type of
    server side
    scripting language they support. If they support PHP, try,
    http://www.jellyform.com/
    Shane H
    [email protected]
    http://www.avenuedesigners.com
    =============================================
    Blog:
    http://avenuedesigners.com/blog/
    Web dev articles, photography, and more:
    http://sourtea.com
    =============================================
    Proud GAWDS member
    http://www.gawds.org/showmember.php?memberid=1495
    Delivering accessible websites to all ...
    =============================================
    "mastacraft" <[email protected]> wrote in
    message
    news:f3pote$d16$[email protected]..
    > Hello,
    >
    > I need to create a booking form for a website- So wen
    they fill out form
    > for
    > bookings. Should have tab for club appearance. Magazine
    ads. Etc It needs
    > to
    > lead to this email : [email protected]
    >
    > I'm really not sure how the best way is to do this, i
    understand it's
    > probably
    > a really simple process.
    >
    > Regards,
    >

  • How to create Work Books in BI 7.0

    Hi Experts,
    Good Morning.
    I am working BI 7.0, My requirements is create Work Book and include below follwoing
    1. The end of report footer message should come
    2. Company LOGO Should come in the header of every report.
    Please provide me solutions step-by-step, how to create work book, and how to include following above requirements.
    Thanks in Advance.
    Thanks & Regards,
    Bharathi.

    Hi Barathi,
    Please go through the below thread which will tell you how to add Logo to the work book
    Re: Permanent BW Excel Template
    For the common template with the company logo-->This code basically updates the RS table rsrwbtemplate which has the default workbook template information with the templae you specify.
    IF you want to insert the logo in the work book template
    Menu path --> choose insert -->picture -->clip art
    Regards
    KP
    Edited by: prashanthk on Jul 12, 2010 7:59 AM

  • How to Creat Work book

    Hi Bw guru's,
    please explain how to create work book using querries.
    thanks in advice.
    kumar.

    hi kumar...chk these..
    Workbooks into which queries are inserted are no different in appearance than other Excel workbooks. They can be saved as files, copied, sent and (using Excel functions) edited however you like and even supplemented with other data.
    Ad-hoc query is the one that the user/developer would want to create/use for researching/validating something. This may be to validate the data also. This differs from Production query as it would not be used everyday and would be just be used for that moment.
    http://help.sap.com/saphelp_nw04/helpdata/en/3a/89883989676778e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
    http://searchsap.techtarget.com/searchSAP/downloads/chapter-august.pdf
    workbook
    1) A workbook delivers the interface for your query.
    2) In a workbook, you can embed design items and customized macros, and you can format its appearance for a highly customized look and feel. The end-user will typically open a workbook and navigate within it execute its queries and see current data.
    3) A query ad ho in WAD means that in your Web application, you want to be able to display data in a table or graphic, similar to in the Web Analyzer.
    You can do this by using the Dropdown Box Web item and linking the commands for showing and hiding Web items to it.
    hope it helps..

  • How to create a drop down box and text box in screen painter?

    Hi i am totally new to this concept of screen painter..please can any tell me
    how to create drop down box in screen painter?
    How to create or display default date and time values?
    How to create text box for giving comments?
    How to store the records that we are entering in a table?
    Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

    Hi,
    Check all these.
    1.how to create drop down box in screen painter?
    To get Drop Drown Box on screen .
    Follow these steps.
    1.
    Go to T.Code SE51 and Select Laypout for the Screen.
    2.
    Double click on the field for which u want Dropdown box.
    3.
    Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
    4.
    Save and Activate ur screen .
    5.
    Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
    6.
    The following code should be written under PROCESS BEFORE EVENT in the MODULE.
    TYPE-POOLS :vrm.
    DATA:
      i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
      w_natio LIKE LINE OF i_natio.
    DATA:
    BEGIN OF i_t005t OCCURS 0,
        land1 TYPE t005t-land1,
        natio TYPE t005t-natio,
    END OF i_t005t.
    IF i_t005t[] IS INITIAL.
      SELECT land1 natio
         FROM t005t
           INTO TABLE i_t005t
       WHERE spras = sy-langu.
      IF sy-subrc = 0.
      LOOP AT i_t005t .
          w_natio-key = i_t005t-land1.
          w_natio-text = i_t005t-natio.
          APPEND w_natio TO i_natio.
          CLEAR w_natio.
      ENDLOOP.
      ENDIF.
    ENDIF.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
                          id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                    values = i_natio
    EXCEPTIONS
       id_illegal_name = 1
                OTHERS = 2.
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    2.1.How to create or display default date and time values?
    1.
    create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
    2.
    Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
    3.How to create text box for giving comments?
    1.
    Define one variable in the TOP include with type STRING means Global variable.
    2.
    Create one input field by giving screen field name which u have defined in the above step.
    4.How to store the records that we are entering in a table?
    For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
    Check the following steps to handle Table control.
    1).
    U should take one variable in your internal table or in structure which
    is used for table control fields
    ex :
    data :
    begin of itab occurs 0 ,
        mark type c , "This is to select the record.
        matnr like mara-matnr ,
        matkl like mara-matkl,
        maktx like makt-maktx,
    end of itab .
    Controls: TABC types TABLEVIEW using screen 100.
    2).
    This mark variable should be given in Table control properties.
    follow the path
    double click on the table control-->attributes .->select
    w/SelColumn and in that itab-mark. Check in the figure.
    [Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
    3).
    After that. Take this example.
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    LOOP AT ITAB WITH CONTROL tabc
    ENDLOOP.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    LOOP AT ITAB.
       Module read_table_control.
    ENDLOOP.
    module user_command_0100.
    In this Module read_table_control, You should write the following code
    MODULE read_table_control INPUT.
    MODIFY itab INDEX tabc-current_line."( This will update the
    "ITAB table MARK field with 'X ' whatever we have selected
    "on table control.)
    ENDMODULE.
    4)
    If you want to Delete some of the records from Table control
    follow this code …Create one pushbutton and give Fucnction code to that
    and write below code
    CASE OKCODE.
    WHEN 'CREATE'.
    LOOP AT itab WHERE mark = 'X'.
    "Use UPDATE statement to create new record.
    ENDLOOP.
    ENDCASE.
    I hope that you will get something.
    Regards,
    Venkat.O

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to Create a Page LOV Template and a Region LOV Report Template in APEX

    Hi All,
    Thanks in advance ..
    I am new to APEX , Currently working in APEX 3.2
    Can any one please guide me How to Create a Page LOV Template and a Region LOV Report Template in APEX
    So that I can create dynamic Multi column LOV in APEX
    Cheers
    Sachin

    Sachin,
    I think you are en-quiring about 'Custom pop-up page'. See this link. You will get all required info there.
    Regards,
    Hari

  • How to create xml file from Oracle and sending the same xml file to an url

    How to create xml file from Oracle and sending the same xml file to an url

    SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
    Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

  • How to create a gui pf status and guititle in module pool programming?

    hi frnds,
    how to create a gui pf status and gui title in module pool programming?
    my problem is i created a screen and wen execute the screen by a tcode.am nt able to activate SAVE BACK EXIT CANCEL COMMANDS?.how to do this can any one explain in detail procedure?
    plz gve step by step process.

    Hi,
    For Title:In PBO...just write
    SET TITLEBAR 'ZTITLE'.
    double click on 'ZTITLE'....give whatever title u want...save it...activate...and check...reward points if useful...
    PF means FUNCTION CODE
    ex; set pf-status 'zrstatus'.
    double click on the zrstatus expand the application server ,
    at the time of execution the default menu(ie system,help),application toolbar buttons like enter,help etc and function keys(by default there will be no function keys)as are there on the normal
    will appear on the screen.
    Details:
    PF-STATUS is used to set the GUI Status of a screen, ie you can control the options on your menu bar, application toolbar, the function keys assigned to various options etc.
    Implementing the status for a screen can be done in 2 ways:
    1) Create the GUI status using the object list of the program or by using the transaction SE41. Then, assign it to the screen using SET PF-STATUS statement.
    2) Create the GUI status by means of forward navigation, ie, use the SET PF-STATUS 'XXX' statement where 'XXX' is the name of the GUI status and double click on it to create it.
    Status names can have a maximum of 20 characters.
    After assigning a GUI status to a screen, this is inherited to all subsequent screens. In order to have a different status for each of the subsequent screens, you have to set a separate status for each screen.
    In transaction SE41,
    1) Give the program name and the status name and click on the Create button.
    2) Go to 'Function keys' and expand.
    3) On top of the save icon type SAVE, on top of the back icon type BACK, on top the the exit icon type EXIT etc ie on top of all the icons that you want to use, type the respective names that you want to give.
    Whatever you have typed now becomes the function codes of these icons and can be used in your program.
    For example you have a screen 100.
    In the 'Element list' tab of the screen, give "ok_code" as the name where "OK" is the type of screen element. Activate screen.
    The flow logic for the screen looks like this:
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
    Create the modules STATUS_0100 and USER_COMMAND_0100 in the main program by simply double clicking on them.
    The code for these modules can be something like this:
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'Example'. "Example is the name of the GUI status
    ENDMODULE.
    MODULE user_command_0100 INPUT.
    CASE ok_code.
    WHEN 'SAVE'.
    "call a subroutine to save the data or give statements to save data.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
    LEAVE PROGRAM.
    ENDCASE.
    ENDMODULE.
    Regards,
    Shiva Kumar (Reward If helpful)

  • How to create a Templates for Categories and Products In BCC

    Hi All,
    Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
    If possible can any one send the document or where we find in atg docs
    Regards,

    At product/category/sku level there is a property called template.
    Find the property in ACC/BCC and provide all the values including the URL property.
    In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
    <dsp:valueof param="product.template.URL" />
    Using that property with <dsp:include> includes that page.
    Peace
    Shaik

  • How to create a barcode in scripts and smartforms

    hi
    how to create a barcode in scripts and smartforms

    Hi,
    For Script:
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool. 
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
    Not to fear though, there are two ways to get around this:
    - You can have your IT department do some research - 
    most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
    - Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes. 
    - Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
    Now you have a barcode printed - what next?
    Well there are two options, depending on your business requirements:
    - You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
    - Another solution is to use SAPConsole transactions
    or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor. 
    These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
    For SmartForm:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Regards,
    Bhaskar

  • How to create the servlet as acontroller  and how to use it

    how to create the servlet as acontroller and how to use it

    >
    John
    Please update your forum profile with a real handle instead of "914824".
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
    just wanted to know if its possible to do something like this in java.
    Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
    It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
    Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons.

  • How to create documentation for report programs and how to use it

    how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
      Note: Exaple <b>RSTXSCRP</b> programs selection screen

    Hi
    1 goto SE38 transaction, give the program name
    2 Click on documentation radiobutton & then press change
    3 Write your PURPOSE, PREREQUISITES etc details
    4 Save the same & Activae it.
    The icon will come automatically on selection screen
    Thanks
    Sandeep
    Reward if useful

Maybe you are looking for