How to create a contract with one supplier and two dealers?

Hi Gurus,
I have a contract with a supplier (eg. Apple), but the products and services are supplied by two dealers.
The supplier is the manufacturer and with whom the negotiation of prices is made.
The dealers are those who make the delivery of the products and services and who the payment is done.
How can I create a contract with these characteristics in SRM 7.0?
I don't want to create two contracts with same products and services for two suppliers (Dealer_1 and Dealer_2).
How can this be handled through business partner type "Vendor"?
In "Partner" section in "Header" --> "Basic data", I can only add 1 vendor.
The system is:
Component software: SRM_SERVER
Release: 700
Level: 0008
Support package: SAPKIBKV08
Thanks in advance and best regards,
Alonso Valenzuela

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using  BAPI_CUSTOMERCONTRACT_CHANGE.  The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

Similar Messages

  • How do I use icloud with one mac and two iphones

    I have just got an iPhone 5.
    My wife and I share a macbook pro
    My wife has an iphone 4s and uses iCloud to sync photos etc.
    I want to use iCloud too, so.....how do we use iCloud so:
    - when we each take photos on our phones they sync to our mac
    - our contacts sync (can we set preferences on our individual phones so we only get the contacts we want on our iPhones from a shared address book on the mac)
    - we have individual calendars
    Any advice much appreciated.
    Thank you.

    If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account.  Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On.  If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group.  Then turn iCloud syncing for Contacts to on on all your devices.  To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view.  When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
    If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud.  If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
    The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account.  This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones.  And by using contact groups you can filter your view to just your own contacts.

  • Motion how to create 3d effect with a background and one primary object

    motion how to create 3d effect with a background and one primary object

    … like that?
    http://youtu.be/yOht1GJpEm4

  • How to create editable table with one empty row ?

    I'm looking for solution how to create editable table with one empty row using ADF BC. I have seen this solution in application that was created in JHeadstart and it's very well idea to use it insead of creation form.

    hammm, i do it this:
    drop the VO on the page, select Table->ADF Table....
    so, drop the botton create, from de VO->operations->create (the firts), and right botton (mouse) Edit binding....
    in Data collection select the VO, in Select an action select CreateInsert
    luck

  • How to create a matrix with constant values and multiply it with the output of adc

    How to create a matrix with constant values and multiply it with the output of adc 

    nitinkajay wrote:
    How to create a matrix with constant values and multiply it with the output of adc 
    Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • How to create a table with datatype blob and insert a pdf file (ravi)

    how to create a table with datatype blob and insert a pdf file,
    give me the explain asap
    1.create the table?
    2.insert the pdffiles into tables?
    3.how to view the files?
    Thanks & Regards
    ravikumar.k
    Edited by: 895044 on Dec 5, 2011 2:55 AM

    895044 wrote:
    how to create a table with datatype blob and insert a pdf file,
    give me the explain asapPerhaps you should read...
    {message:id=9360002}
    especially point 2.
    We're not just sitting here waiting to answer your question as quickly as possible for you.

  • How to create 2D array with 3 rows and unlimit column?

    how to create 2D array with 3 rows and unlimit column?

    Here are images of what I described in my previous post
    Message Edited by JoeLabView on 11-14-2007 07:56 AM
    Attachments:
    2D-array_code.PNG ‏7 KB
    2D-array_values.PNG ‏13 KB

  • How to create a dimension with one level

    I created a cube with some dimensions, that have only a level, and this kind of dimensions bring me some problems when I want to use "OracleBI Spreadsheet Add-In" to consult the cube.
    The problem is that I can’t create a hierarchy with only a level, so the dimensions are created without a hierarchy.
    When I make a query in the “Query Builder” of "OracleBI Spreadsheet Add-In", I have some problems in the step of choosing what levels I want to select for a determined dimension, if that dimension is a dimension without a hierarchy.
    What really happens is that, I can see all the values for the level in the left box, but I don’t achieve to put one of these values on the right box. I can click in the next button, to jump to the next dimension, and all the process of selection for the other dimensions occurs without problems, except for the dimensions that haven’t a hierarchy.
    If I select only dimensions that have a hierarchy, all works perfectly, but if I select one or more dimensions that don’t have a hierarchy, the following problems occur:
    => I can’t select the values of the level that I want to see (only for dimensions that don’t have a hierarchy)
    => When I click in “end” button of the “Query Builder”, it doesn’t finish and blocks.
    The solution is to create a hierarchy, but I can’t create a hierarchy with only a level. Is it possible to create a “top level” without a source column in the dimension table? So I will have two levels, and with these two levels I can create a hierarchy that resolves the problem.
    What is the solution for this problem?
    Regards,
    Rui Torres

    How I can resolve my problem?
    I don’t want to use the CWM2 PL/SQL packages, because with these packages I only can create MOLAP cubes.
    I only want to create ROLAP cubes, but I can't create a hierarchy with one level.
    Why the "OracleBI Spreadsheet Add-In" doesn’t work with dimensions, that not have hierarchies?
    How I can resolve this BIG problem?
    It is very URGENT!!!!
    Regards,
    Rui Torres

  • Hash with one key and two values

    Hello,
    In java can i have a hash or similar data type than can have one value and two keys?
    thanks,
    jd

    Eh, I'd avoid arrays, personally.
    The reason why is that in my experience, once you start doing things like this, you end up adding an arbitrary number of additional elements for each key. Fixed-size arrays would be a pain.
    If you don't want/need to create an object that encapsulates the two values, why not just use a java.util.Collection as the value in the hash? The Collection -- say, a LinkedList (you decide) -- would hold the two values you want associated with the key.

  • How to create a Contract with reference to a Sales-Order(VA01) with a BAPI

    Hi,
    my name is Wadim and i need help.
    My problem:
    I am creating a sales-order(VA01) with the BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'.
    After that i have to create a contract(VA41) with reference to this order. I found the BAPI "BAPI_CONTRACT_CREATEFROMDATA" and it has the same interfaceparameters like the salesorder-bapi. but there are no parameters to get a connection to the sales-order.
    Is it even possible to get a connection to a sales-order with a bapi???
    thanks for help
    regards mark
    Edited by: Krapp Wadim on May 20, 2010 9:19 PM

    Hi Wadim,
    I have a similar requirement to create order lines in an existing contract with reference using  BAPI_CUSTOMERCONTRACT_CHANGE.  The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
    Did you come across any such issue ? If yes , could you suggest the solution ?
    Regards,
    Venkat.

  • How to create an infotype with one of its field length eq 1000.??

    hi ,
    i need to create a infotype where one of the field length is 1000 characters how do i achieve this. if i give more than 255 in the PS structure it will not allow. then how do i get a text field of 1000 chars in the screen ( which is an input field)

    You can use those function calls even inside a PA Infotype.. they just invoke the text ediotr table control.. I gave you the reference of the PD infotype 1002 just for an idea. I don't think you will able to meet your 1000 char reqt without using the text editor.
    ~Suresh

  • How to create logical directories with same name on two databases

    Hi,
    OS: Windows
    Oracle Version : 10g
    I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
    Can't we create directories with same name but different path in two databases on one machine?
    Pls suggest me on this
    Regards,
    Vijay

    I am trying to create logical directory using CREATE
    DIRECTORY statement. I am very much aware that the
    create directory statement doesn't create directory
    on OS. But we can attach the physical directory on OS
    to logical directory in oracle
    My requirement is to create logical directories in
    oracle mapping the OS directories. Both the
    databases, wil have same logical directory names but
    different OS directory mappingsIf I understand you correctly, you can do this:
    On DB 1
    CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
    On DB 2
    CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
    What stops you from doing that ?
    Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

  • HT201250 Time Machine: How to create a backup at one moment and keep it forever?

    Hello, friends,
    When I'm about to install something on my Mac, I'd like to create a backup with Time Machine, so I could simply restore it in case something goes wrong.
    I know Time Machine saves only hourly/daily/monthly backups, but can I do a "backup now", so this moment with show when I Enter Time Machine?
    Thanks!

    dpc_apple wrote:
    ... can I do a "backup now", so this moment with show when I Enter Time Machine?
    That is not how TM works.
    How Time Machine Works its Magic
    Follow clintonfrombirmingham Advise.
    Time Machine vs. Clones and Archives

  • How i can make Waveform with one X and 2 diferent Y axis

    I have 2 arrays with one same collumn
    I want to show it on waveform chart with one x axis.
    Its must lokks like that:

    You can't have two separate Y axis stacked on one another. You can create multiple Ys that can be on the same side, or opposite sides.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to run two programs with one PC and two monitors

    Good Morning,
    I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
    For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
    Thanks in advance

    Hi Parker,
    yes, it's possible. You also have properties to set windows to specific monitors...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

Maybe you are looking for