How to create a document with sections that differ in margin and layout

I'm trying to add a pages document 'B' into my new pages document 'A'.
A and B have two entirely different layouts and different document margins. So whenever i copy B into A, B's margins become A's margins and thus B's layout turns into a mess.
I tried adding a section break, column break, layout break.. None resolves the issues.
All ideas on this are appreciated.
Thank you.

A document has the same size, orientation and margins throughout.
You can however set the minimum margins and use Layout breaks to position text and images within that.
In practice it is best to keep the two separate and combine the finished sets as .pdfs.
Peter

Similar Messages

How to create shipment document with out inbound delivery document

Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
Lakshmikanth

Dear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali.

How to create the document with originals and checkin that document

I am using this 2 bapi for creating DMS ,
BAPI_DOCUMENT_CREATE2
BAPI_TRANSACTION_COMMIT
BAPI_DOCUMENT_CHECKIN2
BAPI_TRANSACTION_COMMIT
at last we want to c in DRAO table the created doc no should be updated here.
But it not updating.how can i update in the table..
Please tell via code..

How do you call BAPI_DOCUMENT_CREATE2?
I just tried with the example given in the documentation and with a little adjustment I created a document with an original which appears in the DMS_DOC_FILES table.
DATA: ls_doc    LIKE bapi_doc_draw2,
        ls_return LIKE bapiret2.
DATA: lf_doctype    LIKE bapi_doc_draw2-documenttype,
        lf_docnumber LIKE bapi_doc_draw2-documentnumber,
        lf_docpart    LIKE bapi_doc_draw2-documentpart,
        lf_docversion LIKE bapi_doc_draw2-documentversion.
DATA: lt_files LIKE bapi_doc_files2 OCCURS 0 WITH HEADER LINE,
        lt_drat LIKE bapi_doc_drat OCCURS 0 WITH HEADER LINE.
ls_doc-documenttype    = 'Z01'.
ls_doc-documentversion = '01'.
ls_doc-documentpart    = '000'.
ls_doc-statusextern   = 'DR'.
ls_doc-laboratory     = '001'.
REFRESH lt_files.
CLEAR lt_files.
lt_files-docfile      = 'c:\BP\test.docx'.
APPEND lt_files.
CLEAR lt_drat.
REFRESH lt_drat.
lt_drat-language    = 'EN'.
lt_drat-description = 'Info Rec Description'.
APPEND lt_drat.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
        EXPORTING: documentdata         = ls_doc
        IMPORTING: documenttype         = lf_doctype
                   documentnumber       = lf_docnumber
                   documentpart         = lf_docpart
                   documentversion      = lf_docversion
                   return               = ls_return
       TABLES: documentdescriptions = lt_drat
               documentfiles        = lt_files.
IF ls_return-type CA 'EA'.
    ROLLBACK WORK.
    MESSAGE ID '26' TYPE 'I' NUMBER '000'
            WITH ls_return-message.
ELSE.
    COMMIT WORK.
ENDIF.
Best Regards,
Martin

How to creat a document with a file

i'm coding a texteditor-like programme.
I did use a Jtable instead of a JtextComponent's subclass to display & edit text.
however, i want to realize some function just like a texteditor such as undo & redo.
Shoud i must creat a document to realize function i mentioned above?
if yes, i searched in the google to find that always use method jtextComponent.setDocument () to automatically creat a document by files loaded in the jtextComponent.
if i just creat a jtextarea for creating document & did not make it visible, whether it will waste too much resouces
or i should make a subclass of AbstractDocument to transformer file to document?

Hi Gilo,
Check these docs...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb">How to Download a Hierarchy to a Flat File</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm">Uploading Hierarchies from Flat Files</a>
<a href="http://sapbwneelam.blogspot.com">More Docs...</a>
Hope it Helps
Srini

How to creat pdf documents with printing restrictions in Aperture

Hi,
I wondered if it is possible to create a pdf document made up of 9-12 image per page contact sheets, to send to clients that restricts the client to open and view only i.e no printing allowed.
Photoshop allows this, however i would like to create /correct versions in aperture and then create a pdf [with the above printing restrictions applied, simply to save time.
the way i work in photoshop is to export approx a 500 to 1000 jpegs [ per client] in aperture to a folder which I then open with Bridge- create the contact sheets and then create the pdf document with printing restrictions applied.
is there any way for me to make this simpler, especially just using Aperture?

just been reading about terminal on another thread.... Spinning beach ball,,[page 2 of Aperture discussions].Apparently there is a command line explained there that can help speed up Aperture. I tried it but Had a problem when trying to type in my Password... It would not let me type anything....So I canceled the proceedure. [ knowing my luck I would cause some irrepairable damage to the machine].
Think I need to do a lot of reading up to get up to scratch with folk using this discussion Board!!!
With regards to the pdfauxinfo- is it complicated to get running, or does it run straiaght away in automator?

How to create a circle with text that is transparent

I am trying to achieve this affect. I want a black circle with text in it but where ever I place the circle the text needs to be transparent and you see through it.
Any help would be much appreciated.
I am using Illustrator CC 2014
Thanks

I am using CS5.1 but the technique is the same, hope the info below will be of help.
1. Create circle
2. Type word - then select Type from the top menu and select Create Outlines (for ease of selection I colour the type)
3. Select shape and text with the (black arrow) selection tool.
4. Top menu - Window - scroll down to Pathfinder
5. Select Divide - then select shape and text again and select the top menu Object and scroll down to Ungroup.
6. Then select the red parts of the text and delete or another way is to select a part of the text with colour go to top menu and go to Select scroll down to Same and select Fill Colour this will select all the same colour you will want to delete instead of clicking on each part separately and then delete.
Then save the file as a eps or Ai file etc
Example below.

How to create a document with SRM BAPIS

Dear colleagues,
I have a problem with SRM BAPIs. I need to insert a pdf document into a record using SAP BAPIs, This document is already in a table in a binary format
I am trying with these BAPIs:
    1.
          CALL FUNCTION 'BAPI_SRM_DOC_CREATE'
              EXPORTING
                rms_id                  = rms_id
                sps_id                  = sps_id
                documentid              = documentid
                description             = 'DESCRIPTION'
                do_commit               = 'X'
                documentid_check_unique = 'X'
              IMPORTING
                return                  = return
                objectid                = objectid
                documentclass           = documentclass
              TABLES
                required_properties     = required_properties.
          This BAPI is working as expected. It returns objectid for the new document.
     2. Now I'm using BAPI_RECORD_ADDELEMENT:
             ls_doc_id-objectid = objectid.
            CLEAR: ls_sp_poid. " clear weg und ls_sp_poid clearen
            ls_sp_poid-name = 'DOC_ID'.
            ls_sp_poid-value = ls_doc_id.
            APPEND ls_sp_poid TO lt_sp_poid.
            CLEAR: ls_doc_id.
            ls_sp_poid-name = 'VARIANT'.
            ls_sp_poid-value = '0'.
            APPEND ls_sp_poid TO lt_sp_poid.
            CLEAR: ls_doc_id.
            ls_sp_poid-name = 'VERSION'.
            ls_sp_poid-value = '0'.
            APPEND ls_sp_poid TO lt_sp_poid.
            ls_insertion_by_anchor-anchor = 'DECRET'.
            ls_insertion_by_anchor-parent_node_id = '5'.
            ls_insertion_by_anchor-parent_node_attr_name = 'DECRETAT'.
            ls_insertion_by_anchor-parent_node_attr_value = '40'.
          CALL FUNCTION 'BAPI_RECORD_ADDELEMENT'
              EXPORTING
                objectid                    = zrm_attcab_scr-phio_id
                documentclass               = documentclass
                sps_id                      = 'ZRM_SPS_DOCVAR'
                anchor                      = 'DECRETS'
                description                 = 'Descripcion'
                store_as_new_version        = 'X' "Si X se crea vacio
*               STACKED                     = ''
*               DOC_CONTEXT                 =
                element_type                = 'I'
*                 insertion_by_anchor         = ls_insertion_by_anchor
*                insertion_by_modelid        = insertion_by_modelid
*               INSERTION_BY_REFERENCE_NODE =
*              ALL_SAME_NAME_ANCHOR        = 'X'
*               SET_ELEM_DESCR_HARD         = ' '
*                omit_authority_check        = 'X'
              IMPORTING
                return                      = ls_return
              TABLES
                element_sp_poid             = lt_sp_poid.
*             ELEMENT_PROPERTIES                =
*             ELEMENT_VISIBILITY                =
         This BAPI returns an internal error
Am I following the correct steps or am I skipping anything?
Could anyone help me?
Thanks in advance!!

I have the same problem!!!
Anyone knows?
Thanks!

How to create a FSV with the text groups in spabish and English

Hi gurus,
could you help me with a issue. I want to know where i can add the text in english in the groups of the fse2 , because i have tha configuration with spanish text but when i execute the f.01 with the language EN the system do not give text in English. So could you help me?
best regards!

I just tried it with our FSV, system language is EN and i executed the report in DE. I could see german texts but not on the FS items.
I dont know, if that is possible because these are custom texts/input fields from you as compared to the system text converted to the required language on the report header and other layout fields
If you want the FS items to also show text in 2 languages, i recommend creating another FSV in the alternate language and using it.

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

Need to create the document with originals and checkin that document

HI Guys,
My requirement is to write a method to create the document with originals and checkin that document of DMS.
Plz suggest the approach to get this requirement solved.
Regards,
RSK

Hi Bala,
Thanks for the reply.
Iam writing the code under method like below.
Importing:
ls_doc type bapi_doc_draw2.
APPEND is_files TO it_files.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
    EXPORTING
      documentdata               = ls_doc
   IMPORTING
     documenttype               = iv_doctype
     documentnumber             = iv_docnumber
     documentpart               = iv_docpart
     documentversion            = iv_docvers
     return                     = iv_return
   TABLES
    documentfiles              = it_files.
Iam checking with document number , document type, document part, document version... it is throwing error message as
error while checking in and storing: version number(25).
Please advice whether it is correct approach?
Regards,
RSK
Edited by: shravan kumar ravula on Dec 22, 2011 11:24 AM
Edited by: shravan kumar ravula on Dec 22, 2011 1:26 PM
Edited by: shravan kumar ravula on Dec 22, 2011 1:26 PM

I used to make booklets on Publisher that would be printed on 11X17 folded and stapled down middle. Can someone please tell me best program to create a document like this in on a mac and how to print it on 11X17?

I used to make booklets on Publisher that would be printed on 11X17 then be folded and stapled down middle. Can someone please tell me best program to create a document like this in on a mac and how to print it on 11X17?

Try iStudio Publisher

How to create a report with data using the Crystal Reports for Java SDK

Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted Jenney

Hi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.newDocument();
// Setup the DB connection
            String database_dll = "Sqlsrv32.dll";
            String db = "qa_start_2012";
            String dsn = "SQL Server";
            String userName = "sa";
            String pwd = "sa";
            // Create the DB connection
            ConnectionInfo oConnectionInfo = new ConnectionInfo();
            PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
            // Set new table logon properties
            PropertyBag oPropertyBag2 = new PropertyBag();
            oPropertyBag2.put("DSN", dsn);
            oPropertyBag2.put("Data Source", db);
            // Set the connection info objects members
            // 1. Pass the Logon Properties to the main PropertyBag
            // 2. Set the Server Description to the new **System DSN**
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
            oPropertyBag1.put("Database DLL", database_dll);
            oConnectionInfo.setAttributes(oPropertyBag1);
            oConnectionInfo.setUserName(userName);
            oConnectionInfo.setPassword(pwd);
            // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
            oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
          String tableName = "Building";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
    catch(ReportSDKException RsdkEx) {
            out.println(RsdkEx);
    catch (Exception ex) {
          out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
          String tableName = "Building";
            String fieldname = "Building_Name";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setAlias(tableName);
            oTable.setQualifiedName(tableName);
            oTable.setDescription(tableName) ;
            Fields fields = new Fields();
            DBField field = new DBField();
            field.setDescription(fieldname);
            field.setHeadingText(fieldname);
            field.setName(fieldname);
            field.setType(FieldValueType.stringField);
            field.setLength(40);
            fields.add(field);
            oTable.setDataFields(fields);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
            oFieldObject.setDataSourceName(field.getFormulaForm());
            oFieldObject.setFieldValueType(field.getType());
            // Now add it to the section
            oFieldObject.setLeft(3120);
            oFieldObject.setTop(120);
            oFieldObject.setWidth(1911);
            oFieldObject.setHeight(226);
            rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you

How to create a document folder using ListData.svc

Hi All,
I've recently been put on a project where I need to use the REST services (ListData.svc) to retrieve and add documents to the document library. It all has been smooth sailing until I hit the point where I want to save a document in a path that doesn't exist.
I get an error if I try to save a file where the folder structure doesn't exist. I then went about it a different way trying to create the folder structure first. This also didn't work and I get an error message saying that the entity type is marked with the
MediaEntry attribute but no save stream was set for the entity. Not too sure what set for the save stream if I'm just adding a folder.
So my question is can a file be added to a folder structure that doesn't exist where it automatically creates the folders. If not can the service create folders?
Some sample code I've been using:
var folder = new SampleDocumentLibraryItem();
folder.Name = "Sample";
folder.Title = "Sample";
folder.ContentType = "Folder";
folder.Path = "/sample/folder1/folder2";
spContext.AddToSampleDocumentLibrary(folder);
spContext.SaveChanges();
Thanks in advance,
Damo

Hi All,
Finally managed to figure this one out. For anyone who needs source on how to create a document folder. Some sample source is below...
var folder = new DocumentLibraryItem();
folder.Name = "Folder Name";
folder.Title = "Folder Name";
folder.ContentType = "Folder";
folder.Path = path;
spContext.AddtoDocumentLibrary(folder);
spContext.SetSaveStream(folder, stream, false, folder.ContentType, folder.Path + folder.Name + "|0x0120009BCC19899CEBC6468FF4EEAC7B8CF4F5"
spContext.SaveChanges();
So the important differences in the code above. The content type of the object and stream MUST be set to "Folder". I'm not sure why but you still need to set the save stream to be a valid stream even though you're only adding a folder. So just keep the stream
open and then pass "true" to close it when you actually save the file. The other important element as noted from the URL's in the previous comments is you need to add a "|" + Content Type ID of a folder. You'll be able to get this ID by visiting the rest service
for an existing document library and view source to see the actual content type id for a folder.
Thanks everyone for your help,
Damo

How to create a Document Set in SharePoint 2013 using JavaScript Client Side Object Model (JSOM)?

Hi,
The requirement is to create ""Document Sets in Bulk" using JSOM. I am using the following posts:-
http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1904cddb-850c-4425-8205-998bfaad07d7/create-document-set-using-ecma-script
But, when I am executing the code, I am getting error "Cannot read property 'DocumentSet' of undefined "..Please find
below my code. I am using Content editor web part and attached my JS file with that :-
<div>
<label>Enter the DocumentSet Name <input type="text" id="txtGetDocumentSetName" name="DocumentSetname"/> </label> </br>
<input type="button" id="btncreate" name="bcreateDocumentSet" value="Create Document Set" onclick="javascript:CreateDocumentSet()"/>
</div>
<script type="text/javascript" src="//ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.2.min.js"> </script>
<script type="text/javascript">
SP.SOD.executeFunc('sp.js','SP.ClientContext','SP.DocumentSet','SP.DocumentManagement.js',CreateDocumentSet);
// This function is called on click of the “Create Document Set” button.
var ctx;
var parentFolder;
var newDocSetName;
var docsetContentType;
function CreateDocumentSet() {
alert("In ClientContext");
var ctx = SP.ClientContext.get_current();
newDocSetName = $('#txtGetDocumentSetName').val();
var docSetContentTypeID = "0x0120D520";
alert("docSetContentTypeID:=" + docSetContentTypeID);
var web = ctx.get_web();
var list = web.get_lists().getByTitle('Current Documents');
ctx.load(list);
alert("List Loaded !!");
parentFolder = list.get_rootFolder();
ctx.load(parentFolder);
docsetContentType = web.get_contentTypes().getById(docSetContentTypeID);
ctx.load(docsetContentType);
alert("docsetContentType Loaded !!");
ctx.executeQueryAsync(onRequestSuccess, onRequestFail);
function onRequestSuccess() {
alert("In Success");
SP.DocumentSet.DocumentSet.create(ctx, parentFolder, newDocSetName, docsetContentType.get_id());
alert('Document Set creation successful');
// This function runs if the executeQueryAsync call fails.
function onRequestFail(sender, args) {
alert("Document Set creation failed" + + args.get_message());
Please help !!
Vipul Jain

Hello,
I have already tried your solution, however in that case I get the error - "UncaughtSys.ArgumentNullException: Sys.ArgumentNullException:
Value cannot be null.Parameter name: context"...
Also, I tried removing SP.SOD.executeFunc
from my code, but no success :(
Kindly suggest !!!
Vipul Jain

How to create a document with sections that differ in margin and layout

Similar Messages

Maybe you are looking for