How to create a excel files XSL templates
Hello,
I want to create a excel file, and i started doing it using POI library, but that it's very hard, and I want a way to create excell files using xsl templates.
I think that you can do it using apache cocoon, but i don't know how do it. Anyone has done it?
Thanks
Check out SsTemplates Spreadsheet Templates for Excel. We release this software a couple months ago based on work that we have done at Carbon Five. It has made working with POI to produce Excel documents in a Java environment an easy part of our development process.
SsTemplates builds upon the Jakarta POI/HSSF libraries for writing Microsoft Office documents by providing a simple XML templating language for creating Excel documents similar to creating HTML pages with JSP and CSS.
It's open source and available for download from SourceForge. You can read all about it at http://carbonfive.sourceforge.net/sstemplates/.
Similar Messages
-
How to create an Excel file from XML in the Receiver File Adapter Comm Ch
How do I create an Excel file from XML in the Receiver File Adapter Communication Channel? I have my mapping done and I am outputting the file as a comma delimited csv file. However, the target can only process an Excel file (.xls). How can I generate an Excel in XI?
I saw this blog, but I don't know how to create a XSLT transformation.
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
Any help would be appreciated. Thanks.Here are the steps I took to create an XSLT transformation in XI 3.0:
1. I created my source and target XSDs using XMLSpy.
2. I created the XSLT mapping from source to target in XMLSpy (referencing the souce XSD schema).
3. I created another XSLT mapping to format the target into Excel XML.
4. Import the source and target XSDs in the IR's External Definitions
5. Zip each XSLT mapping (.xls) and import it into the IR's Imported Archives
6. Reference the XSL mappings in the Interface Mapping -
How to create an EXCEL file in Presentation server
hello experts,
please suggest me a solution for the following problem :
I have an internal table with some data.
how can i create an excel file with that data in Presentation Server.
Thanks & Regards
sasi.hi,
u can use FM: 'DOWNLOAD'.
it will prompt u for destination - just give the requd filename and extension.
Ex:
call function 'DOWNLOAD'
exporting
filename =
filetype = 'DAT'
tables
data_tab = tb_output
fieldnames = tb_fld_nam
exceptions
invalid_filesize = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
customer_error = 7
others = 8.
where,
tb_output = internal table having the fields which u want in the O/P
Ex:
data: begin of tb_output occurs 0,
name_1(20) type c,
name_2(20) type c,
end of tb_output.
tb_fld_nam = Field headings :
Ex:
data: begin of tb_fld_nam occurs 0,
name(25) type c,
end of tb_fld_nam.
tb_fld_nam-name = 'Name 1'.
append tb_fld_nam.
tb_fld_nam-name = 'Name 2'.
append tb_fld_nam.
Thanx & Regards,
Ajoy -
How to create an excel file from SAP?
I needed to create an excel file(with out data) format with fields read from a table.
check FM
EXCEL_OLE_STANDARD_DAT
Regards
prabhu -
How to create a excel file which will open in every version of MS Office?
For excel file handling we are using Measurement Studio 8.0 for VS .NET 2003. Now we are save the excel file into.xls file using this format "CNiExcelWorkbook::FileFormatExcel9795" . it will save the file. Now the problem is If that PC has MS Office 2003 or lesser version, then its working fine. But if the PC has MS Office 2007, it will giving problem. So my question is how to save excel file which will support any version of MS Office?
Tapasen
reply me @: [email protected] or [email protected]In your code, write this:
DATA my_path type string.
GET PARAMETER ID 'ZPATH' FIELD my_path. "or any other name you choose
double click on ZPATH, choose create. You will have created a new parameter. You can use any names starting with Z or Y.
Go to SU01, and set this parameter there (ZPATH)..I hope this doesn't need further clarification.
In parameter value, put the path to the file..
After executing the GET statement, the value will be available in the variable my_path. Pass this to GUI_UPLOAD/DOWNLOAD functions, and it should work fine.
Regards,
SD -
I am fairly new to Macro and VBA in Excel. I am trying to reduce the amount of work involved in a task that is performed often in our office. Currently, the task involves using 2 separate Excel files. One file is a tracking sheet and the second is the document
that gets sent out to the client. The second document has all the same information that is inserted into the tracking sheet. What I would like to do is have the information that is in one row on the tracking sheet populate into a new excel file that is created
automatically from an existing template.
I have been able to make this partially work. What I have been able to achieve is have the cell that is selected in the tracking sheet (the description field) copy into the new file that is created from the template that is on our server.
Sub NewRFI()
' NewRFI Macro
MsgBox Selection.Address(ReferenceStyle:=xlA1, _
RowAbsolute:=False, ColumnAbsolute:=False)
Selection.Copy
Workbooks.Add Template:= _
"template file path goes here"
Range("C14").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("C14").Select
Application.CutCopyMode = False
End Sub
What I need to do is get the rest of the information from that same row in the tracking sheet to copy to the new file as well. The other information includes the document number (one cell to the left of the selected cell), who it is from (one cell to the
right of the selected cell), and the date (two cells to the right of the selected cell). As stated, this information is all in the same row on the tracking sheet. Each piece of information needs to be copied to a certain cell in the new file and I do not want
the source formatting to be copied to the new file.
Ideally, I would like it to operate like so: select the first cell in the row (in this case would be the document number field). Then click a button to run the macro that will then copy the information from that row in the tracking sheet to specific cells
in the new file that is created from the template.
This process will save us from having to either manually copy and paste the information into the new file or re-type the same information that is already in the tracking sheet.
This is probably a simple thing to do but it would be great if anybody had some insight on this issue. Thanks in advance!Try code like the following. You will have to change the target cells (D25, F1 and H4) to the ones you want, I just used some arbitrary cells as example.
Sub NewRFI()
Dim rngCell As Range
Set rngCell = ActiveCell
MsgBox Selection.Address(ReferenceStyle:=xlA1, _
RowAbsolute:=False, ColumnAbsolute:=False)
Workbooks.Add Template:="template file path goes here"
Range("C14").Value = rngCell.Value
' Change the target cells as needed
Range("D25").Value = rngCell.Offset(0, -1).Value
Range("F1").Value = rngCell.Offset(0, 1).Value
Range("H4").Value = rngCell.Offset(0, 2).Value
End Sub
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
How to Create a excel file from a table.
i want to excel output from a oracle table.
Please use below one:
DECLARE
CURSOR C1
IS
SELECT DISTINCT JVH_LCM_LCTN_CODE FROM F_JV_HDR;
CURSOR C2 (V_LOC VARCHAR2)
IS
SELECT *
FROM
(SELECT *
FROM F_JV_HDR
WHERE JVH_JV_DATE <= '31-OCT-2011'
AND JVH_DSM_DCMNT_TYPE = 'SJV'
AND JVH_LCM_LCTN_CODE = V_LOC
ORDER BY JVH_JV_DATE DESC
WHERE ROWNUM <= 10
UNION ALL
SELECT *
FROM
(SELECT *
FROM F_JV_HDR
WHERE JVH_JV_DATE > '31-OCT-2011'
AND JVH_DSM_DCMNT_TYPE = 'SJV'
AND JVH_LCM_LCTN_CODE = V_LOC
ORDER BY JVH_JV_DATE
WHERE ROWNUM <= 10;
v_file utl_file.file_type;
linebuf VARCHAR2(32767);
BEGIN
v_file := utl_file.FOPEN('MAIL_OUTPUT','F_JV_HDR-SJV.csv','w') ; --Change the CSV file name
LINEBUF := 'JVH_LCM_LCTN_CODE,JVH_DSM_DCMNT_TYPE,JVH_JV_TMPRY_NMBR,JVH_JV_TMPRY_DATE,JVH_SRCE_INDCTR,JVH_CRTD_DATE,JVH_CRTD_BY,JVH_ATHRSTN_STS,JVH_DSM_TRM_TR_CODE,JVH_DSM_DCMNT_SRS,JVH_LCM_LCTN_CODE_BOOK,JVH_ATHRSTN_RQRD_INDCTR,JVH_FNCL_CLSRE_INDCTR,JVH_TRNSCTN_WITH_INDCTR,JVH_TRNSCTNR_CODE,JVH_JV_NMBR,JVH_JV_DATE,JVH_RMRKS,JVH_JV_RVRSD_NMBR,JVH_CHQE_DUE_DATE,JVH_ATHRSD_DATE,JVH_ATHRSD_BY,JVH_TR_CODE_RVRSD,JVH_DCMNT_TYPE_RVRSD,JVH_JV_RVRSD_INDCTR,JVH_NJV_TAG,JVH_TYPE,JVH_AUTO_RVSL_INDCTR,JVH_AUTO_RVSL_DATE,JVH_BUS_BKS_UPLOAD'; --Chage the headings
utl_file.put_line(v_file,linebuf);
FOR I1 IN C1
LOOP
FOR I2 IN C2(I1.JVH_LCM_LCTN_CODE) --Change the cursor parameter
LOOP
LINEBUF := I2.JVH_LCM_LCTN_CODE||','||I2.JVH_DSM_DCMNT_TYPE||','||I2.JVH_JV_TMPRY_NMBR||','||I2.JVH_JV_TMPRY_DATE||','||I2.JVH_SRCE_INDCTR||','||I2.JVH_CRTD_DATE||','||I2.JVH_CRTD_BY||','||I2.JVH_ATHRSTN_STS||','||I2.JVH_DSM_TRM_TR_CODE||','||I2.JVH_DSM_DCMNT_SRS||','||I2.JVH_LCM_LCTN_CODE_BOOK||','||I2.JVH_ATHRSTN_RQRD_INDCTR||','||I2.JVH_FNCL_CLSRE_INDCTR||','||I2.JVH_TRNSCTN_WITH_INDCTR||','||I2.JVH_TRNSCTNR_CODE||','||I2.JVH_JV_NMBR||','||I2.JVH_JV_DATE||','||I2.JVH_RMRKS||','||I2.JVH_JV_RVRSD_NMBR||','||I2.JVH_CHQE_DUE_DATE||','||I2.JVH_ATHRSD_DATE||','||I2.JVH_ATHRSD_BY||','||I2.JVH_TR_CODE_RVRSD||','||I2.JVH_DCMNT_TYPE_RVRSD||','||I2.JVH_JV_RVRSD_INDCTR||','||I2.JVH_NJV_TAG||','||I2.JVH_TYPE||','||I2.JVH_AUTO_RVSL_INDCTR||','||I2.JVH_AUTO_RVSL_DATE||','||I2.JVH_BUS_BKS_UPLOAD; --Change the cursor values
utl_file.put_line(v_file,linebuf);
END LOOP;
END LOOP;
UTL_FILE.FCLOSE(V_FILE);
END;
/ -
How can I create an Excel file?
Hi,
How can I create an Excel file using Forms 6i.
What I'm doing is to create a file using TEXT_IO package an name it .XLS. If a read it double-clicking over the file, it opens Ok but If I open directly from Excel it opens the Convert dialog.
I need to create an excel file as it was made from within Excel.
Thank in advance,
BenjaminWhen you are talking about subfiles, are you talking like Package contents of an application?
Terminal application in Applications -> Utilities can give a command line grasp of all your files using the du command.
Type
man du
when entering the terminal, followed by the enter key.
Note, by default the terminal opens at the Home folder. To navigate outside the Home folder enter "/Volumes/name of mounted drive/folder/subfolder" as your path. If there are spaces in the name, putting quotes around the whole path can help. If you end your du command with a > name.txt a text file with the name name.txt will be plugged into your Home directory. That you can open with Excel and parse by /es thus giving you everything in Excel. -
How do I create an excel file that has the volume output and the time at which it occured?
Hello:
I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed.
If anyone has ideas about how to do any of these three things, your help is greatly appreciated. I have the output from the syringe pump going into a line graph while I run the test with the time on the x-axis and volume on the y-axis. How would I be able to create an excel file from this information? I would like the excel file to have the time in one column and the volume at that time in the next column. I though that I had wired it correctly, however I feel that the time seems to be a little off and very exact. Attached is the block diagram of what I have done.
Hello:
If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
Attachments:
RATETEST.vi 202 KBLet me start by answering the specific question, and then I will provide some suggestions on the code.
The function you want is the "Write to Spreadsheet File", which you're already using, albeit in a confusing means (more later). I was not able to find any place in your code where you're actually acquiring time information, so I don't understand your comment about the time not being exact. (I'm assuming you mean "not", even though that word was not in your actual sentence.)
As for the code:
As I mentioned, you're using the "Write to Spreadsheet File" twice, as well as the "Write to Measurement File" Express VI. All three seem to be logging the same information, though one of the "Write to Spreadsheet File" functions is logging some sort of volume and diameter information. Please pick one.
You're looping around the path for one of the "Write to Spreadsheet File" functions, but not for the other two functions. Why are you looping the path in the first place?
You' re continuously accruing data into an array to put onto an XY Graph. Please keep in mind that this means the program will slow down as it progresses as this array gets larger and larger, and LabVIEW needs to shuffle memory around. Depending on how fragmented your memory is, you may find the program will crash since LabVIEW cannot allocate a large enough contiguous block of memory for the array.
Your wiring really needs to be cleaned up. Tip: Right-click on a wire and select "Clean Up Wire".
In the middle of the diagram you have a case structure in which the True part has a single iteration loop that's adding 1 to the iteration and updating some local variable, and in the False part you're doing something else with it. I have no idea what you're trying to do, but surely there must be a better way to do it.
You seem to have two tank indicators on top of each other on the front panel and then flipping the visibility of them based on some value. I would think that it would be easier to simply display both at the same time, no? As a user, I would find it somewhat perturbing to see the tanks appear and disappear. -
How to create .ctl (control file) to calide excel rows in ssis ?
In my package i have a requirement to use .ctl control file to valide excel rows. can anyone tell me how to create a .ctl file which will have all of this information.
A few assumptions 1st:
1) I understood the .ctl file can be any ASCII (flat) file of arbitrary format; and that
2) You will drive the validation rules.
Since you seem like want to apply the validation as the first step in your package I advocate plugging the Script Transformation task in which happens to expose the "ProcessInputRow" method that in turn allows a developer to intercept each row for inspection.
This is where you will need to apply much thinking to how to make the validation rules applied in retrospect to the incoming data.
You drive the code (logic). More through help is a click away here http://www.codeproject.com/Articles/193855/An-indespensible-SSIS-transformation-component-Scr which only covers how to make the row-by-row processing possible.
If you expected SSIS to have this functionality provided for free - unfortunately this is not happening.
One of many reason is, what you want to do is extremely laborious.
Arthur My Blog -
How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12
Dear All,
How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12.
My Requirement is to develop RTF Template and geneate Excel output in Multiple sheet.
plz guide me on this..
thnx
Khushalplz see
BI Publisher: How to create Multisheet in Single Excel file using Excel Template [ID 1352000.1]
for r12 you can use excel template
i think it more appropriate for excel output -
How to store an Excel file in InfoPath for users to edit
Hello,
I need an example on how to store an Excel file within InfoPath 2010 so that every time a user opens the InfoPath form they can make changes and can save as part of the form. The next user opens the form and another Excel files (blank) where they make changes and
saves. ThanksStreamlining this would require a bit of custom work I imagine. However if you don't mind giving the users some extra clicks, there are probably a few ways to get the job done.
You could upload the excel file to SharePoint, make sure it's read-only and link to it within the InfoPath form. Then the process would be that users open the InfoPath form, fill it out, download the excel doc to their desktops and fill it out, and then
attach it to the IP form.
Or you could set up a separate, sister library where the New Item defaults to your Excel template. Then from within the InfoPath form you could have a hyperlink that creates the new item, saving it to the library. The caveat here is finding a way to link
to the two items together with a unique identifier. The benefit though is being able to browse and interact with Excel docs independent of the forms they are attached to, if necessary. -
How to open a excel file in WLS 8.1 server.
Dear Sir,
I have created a excel file in WLS 8.1 Application server.
Now I used method as redirectURL(req,resp,Population.xls) to open that file but it failed to open it.
If I give the full path as 'D://USER_OBJETS/APPLICATION/Population.xls'
but it tried to open from client PC not from the server.
so the problem, I managed to create file in server but unable to open it.
Kindly advise how to resolve this problem.
Thanks and Rgds,
Anandan-Singapore.Are you asking in general how to read an Excel file using ActiveX, or are you asking specifically? If you're asking in general, please do a search, as there have been many examples posted on how to use ActiveX to read/write Excel files. There are also numerous links in the Excel thread.
-
How to convert an excel file where customers have partial access for selecting items.
Please Advise,
I have created an excel file with columns that calculates price and quantity. I need to know how my customers can access the file without seeing all my calculations, etc. and just select the number of items. I need to keep my excel formula info confidential and at the same time having the customers the ability to select the items.
This excel file will be placed on my web site and linked where customers have access to it. They make their selections and emailed back for processing.with their selected items. If the excel file is converted into a pdf file, Then placed and linked for customer access how can customers have partial access and select in certain columns and have excel fuction for calculations?
Thanks,
Dan[discussion moved to Creating, Editing & Exporting PDFs forum]
-
How to create a .DLL file from a .C file ?
Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip 37 KBHi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager
Maybe you are looking for
-
Shared mailbox - send as and auditing Exchange 2007
Got 3 users A,B,C who all access a shared mailbox X. They have a requirement to be able to answer emails sent to mailbox X BUT the return address to be X (i.e. not their own or send on behalf etc) so any subsequent relies still go to X and not the in
-
Apps won't install, please help.
I have an iMac which I use for my small business, for a particular software I had to fragment the disk and run Windows and after a few months I removed windows and now I have OSX 10.6.8. My problem is that the apps that I bought via my second iMac ar
-
hi i am using JMS and i want ot use message.setObject(Object ) but this object must be serialized before passing to setObject() method. i have Object type but i cant able to put it in mesage as it is not serialize so how can i serialize this object.
-
Dear All, I have made an info-object for Product using 9AMATNR as template. This object is being mapped to 0MATERIAL in BW system. The APO infoobject has conversion PRODU, whereas 0MATERIAL has ALPHA. There are some codes which are numeric. They are
-
Hi, I am developing video chat application.I am able to play published video stream.But I am unable to hear sound which is published along with the video. The video is visible but sound is not comming.What is going wrong.Does anybody could point me i