How to create a full windows image recovery partition ?

Hi,
It's been about a month since I remplaced my HDD, because the original one which has the recovery partition was currupted...
So, I had to do a clean windows 8.1 x64 installation using my embedded windows 8 key
Now I would like to create a recovery partition with a full windows image that can be executed with F10 on the start up. just like the one that came with the original HDD
Please help...
Thanks in advance !

Be sure and request a usb recovery flashdrive. The cost is usually around $30.00 USD
Ordering recovery media from HP
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

How to create a full system image for Solaris 10 with ZFS

Dear friend,
could you please advice which way to create a full system image for Solaris 10 with ZFS is trusted and practically used?
I'm searching the analogy like Norton Ghost or Acronis True Image but with ZFS support.
I have x86 server Sun Netra X4270.
Thanks in advance,
Dina

One more question Filip,
is it correct, that I should make 2 separate backup for ispool and rpool?
And is it important in which order to restore them from backup?
bash-3.2# zpool list
NAME    SIZE ALLOC   FREE CAP HEALTH ALTROOT
ispool 136G 8.08G   128G   5% ONLINE -
rpool   136G 44.1G 91.9G 32% ONLINE -
bash-3.2# zfs list
NAME                             USED AVAIL REFER MOUNTPOINT
ispool                          8.08G   126G    31K /ispool
ispool/iserver                  8.08G   126G 8.08G /export/home/iserver
rpool                           44.4G 89.5G 46.5K /rpool
rpool/ROOT                      39.1G 89.5G    31K legacy
rpool/ROOT/firstbe              39.1G 89.5G 14.1G /
rpool/ROOT/firstbe/export       20.1G 89.5G    32K /export
rpool/ROOT/firstbe/export/home 20.1G 89.5G 20.1G /export/home
rpool/ROOT/firstbe/opt           651M 89.5G   133M /opt
rpool/ROOT/firstbe/opt/SMAW      518M 89.5G   518M /opt/SMAW
rpool/ROOT/firstbe/usr          3.45G 89.5G 3.45G /usr
rpool/ROOT/firstbe/var           867M 89.5G   867M /var
rpool/dump                      1.00G 89.5G 1.00G -
rpool/swap                      4.25G 89.8G 4.00G -
Br,
Dina

How to create a full phone image from a Screen Capture?

I have an app that I'm trying to market and want to use a full image of the iPhone with screen shots from my app
The image would look similar to this
http://draykenobi.files.wordpress.com/2009/08/iphone-app-store1.jpg
The difference is that my screen capture would be shown on the iPhone. I know how to do the screen capture, but I really like the look with the phone around it.
I have photoshop, but can't seem to find any templates where I could just add my screen shot into the psd.
Does anyone know of how I can achieve this easily. Maybe there's an app that does this?
Thanks

iPhone images made available from Apple are here:
http://www.apple.com/pr/products/iphone/iphone.html
BUT The TOS state they can only be used for editorial purposes.
We are looking at doing a billboard campaign to promote our App. Anyone know who to contact regarding using the images for advertising?

How to create a popup window to load HTML page in AIR application without using any mx or spark?

How to create a popup window to load HTML page in AIR application without using any mx or spark components?
I need to load the HTML page in popup in AIR application without using any of the <mx> or <spark> components. I need to open in the application itself not in the browser.(If we use navigateToURL() it will open in th browser)

Can we achieve this? can somebody help me on this scenario..

Create a full-screen image gallery with MSO - breaks other buttons?

Hi - I'm trying to create a full screen image gallery to be accessible from any layout via a button. The ultimate goal is to use my layout as a presentation tool and allow the presenter to have an 'image gallery' button on each page,so they would be able to jump to a full screen image at any time. Most of my layouts have other buttons, scrollable content, etc. I thought I had a great idea: create a multi-state object with the first state being blank, and each subsequent state would have an image and also a full screen black box at 50% transparency. The problem is, now my other buttons are no longer working. I confirmed that the existing buttons will work if they are arranged to be in front of the image gallery MSO, but that's not a good solution. Am I missing something or is there another workaround? Thanks!
John

You have to put buttons inside each state of the MSO.
It's not really a workable design in the long run, you should probably rethink it It's also not good from an app performance standpoint as it requires loading full-screen images for each state into memory.
Neil

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

URGENT. HOW TO IMPORT MP4 FULL HD IMAGES TO FCP TIMELINE

HOW TO IMPORT MP4 FULL HD IMAGES TO FCP TIMELINE WITHOUT HAVING TO RENDER.

Stop shouting.
You can't use MPEG4 in Final Cut Pro without lots of hassle.
They need to be converted to one of the editing codecs found in Final Cut Pro's Easy Setup menu.
What is the source of your footage and which version of FCP are you using?
What model Mac, with which version of Mac OS X?

How to create a second Window ?

Hello,
I need to create a second Window, but I can't find anything on how to create this, I only find things like "How to create an empty Window" or "How to create a HTML Window" (here: http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7e0a. html ), but I need to create Window with Flex components inside (Like the main Window),
The window that I need to create is just here to get a user input (an Uri) and return it to a method on the main window.
Any idea of how can I do that ?
Thank you !

Use the Flex Window class (which is described in the "Creating an mx:Window" section in the documentation you cited). You can then add Flex components to it.

How to create a new window ?(not popup windows)

How to create a standard window to show my web dynpro window so that the print button can be used ?

hi , you are right , the blog tell me how to create a popup window , but I wanna to create a new window so that I can use the functions provided by the browser , what shall I do ?
Regards ,

Tx1312AU Windows Vista Recovery partition lost

tx1312AU Windows Vista Recovery partition lost after HD crash, how to get it back or should I try Win XP? (I hate Vista already...)

sijyb00 wrote:
See, the the thing is, I DID make the recovery cd... but it isn't working. From my understanding, the cd uses the information from the recovery partition to restore Windows? Correct me if I'm wrong. Every time I boot up the cd it detects no OS and when I click continue, it begins the installation and immediately says Installation cancelled, missing files, something like C:\win.int is missing.
So the recovery cd is not working. I called Toshiba and from what I could understand from the horrible english, was that they would charge me for another recovery cd... which I don't need, because I have one. Or send in my laptop for "repair." They said it was my hard drive. Which is complete bull**bleep**, when windows failed I ran a linux os on it perfectly fine, so it is not my hard drive.
Anyone have any ideas on how I can fix this? I have a product key for vista which I PAID for when I bought the laptop... I don't think it's fair to have to buy it over again for $100-200
No, the recovery disks don't rely on anything on the hard drive. From what you say, either you are not booting from the optical drive, or the disks indeed are faulty.
The last I knew, replacement disks were $25. See the sticky at the top of the General Discussion topic for details.
There have been a lot of reports of problems with recovery disks, so I'm a bit surprised that Toshiba won't ship you replacements at no charge. Might be worth another try, and an attempt to get to the next tech level.

How do I make a windows 10 recovery disk

How do I make a back-up/recovery disk for Windows 10? I made one when I bought this machine that had Windows 8.1 on it but I don't recall how I did it. Help please. Thanks in advance for the help.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are looking for a method to make a recovery disk for your system after upgrading to Windows 10. I am happy to help with this. The method you would have used to make recovery media for your original operating system would be to use the factory installed recovery manager. As an FYI for the Windows 8 method -Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)HP PCs - Creating and Using a System Image to Restore Your Computer (Windows 8) However those tools are not going to help for making a Windows 10 image. For Windows 10, the intention of Microsoft is to dispense with recovery images, however there are still ways to make one. Here are a few pages I found that cover the options in the operating system, how to make a repair disk, and to make an image. Recovery options in Windows 10 - windows.microsoft.comHow to Create a USB Recovery Drive in Windows 10 - www.tenforums.comReset Recovery Image - Create in Windows 10 - www.tenforums.com I hope this helps.

How to create a full screen Air Application with pdf

Hi,
I need to create a app in full screen which can load pdf files.
I read that the pdf files need to have the nativeWindows in normal mode, and "stage.scaleMode" in "StageScaleMode.NO_SCALE" mode to run.
So I get the HTMLLoader dimensions by getting the screen resolution. But by putting "StageScaleMode.NO_SCALE" my movie up and down the pdf is not resizing!!
How can I do to see the pdf and having the asssets (movies in my library) resize too?
Regards,

Could some one help me in creating a full screen
using Java such that we dont see any Taskbar or
anything that is related to windows. For eg when we
play a game we dont have access to those windows
components. http://onesearch.sun.com/search/onesearch/index.jsp?qt=full+screen+java&subCat=&site=dev&dftab=&chooseCat=javaall&col=developer-forums
The basic question is How to Lock the Desktop using
Java Program and also how to capture the Key events
Ctrl + Alt + Del and Alt + Tab and disable its
actual functionality or change its action..You can't.

How to create a Full screen in Java

Could some one help me in creating a full screen using Java such that we dont see any Taskbar or anything that is related to windows. For eg when we play a game we dont have access to those windows components.
The basic question is How to Lock the Desktop using Java Program and also how to capture the Key events Ctrl + Alt + Del and Alt + Tab and disable its actual functionality or change its action..

Could some one help me in creating a full screen
using Java such that we dont see any Taskbar or
anything that is related to windows. For eg when we
play a game we dont have access to those windows
components. http://onesearch.sun.com/search/onesearch/index.jsp?qt=full+screen+java&subCat=&site=dev&dftab=&chooseCat=javaall&col=developer-forums
The basic question is How to Lock the Desktop using
Java Program and also how to capture the Key events
Ctrl + Alt + Del and Alt + Tab and disable its
actual functionality or change its action..You can't.

How to create a pop up image button?

I want to know how to create a button, for when it is selected, an image pops up right next to it. Is there any way to do this? If so, how? Thanks for any help!

Select the thumbnail image and link it to the larger image file.
Use DW Behaviors Panel and hit the plus + sign.
Choose Open Browser Window. This will invoke another panel for adjusting the size and other attributes of your pop-up window.
Hit OK.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to create a dialog window with no button that opens along with the main window?

When the main window is open, the dialog window opens up immediately and can be closed by key press. At other times, when the next step, ie: decision, comes to, the another dialog window pops up again and is again closed by key press. Does anyone know how to do? Use the sub-Vi? notification method? occurrence method?
And another thing: how to create a reusable dialog window with no button so that different messages can be sent to it and it can closed by key press. And how to pass the string to the title of the dialog window programmatically?

For your functionality (If I understand it right), nothing needs to be in the event structure. Pressing any key just triggers the event, thus finishing the VI (there is no while loop).
Could you tell me what you mean my "it won't run properly"? Make sure that the front panel of the subVI is closed before starting the main VI. Remember that the subVI is set to "open when called" and "close afterwards if originally closed". So, if you had the panel open already, it won't of course close when finished!
(Actually, the problems is worse when you have the subVI panel open when starting the main VI. you get a catch22 and labVIEW locks up because (1) the subVI is set to dialog and grabs all attention but (2) it has not been
called, thus the event cannot be triggered. So don't do that!!!! As a quick workaround, add the modification shown in the attached image to ensure the panel of the subVI is closed.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CloseNoButtonDialog.gif ‏3 KB

How to create a full windows image recovery partition ?

Similar Messages

Maybe you are looking for