How to create a jquery as a table instead of a web page so that it can be embedded into an existing web page

I am new to Dreamweaver and I just built a jquery with 3 tabs of information I want to put into my existing web page.  It has saved it as an entire webpage, but it needs to be a table that I can insert into my existing web page.  It's 3 tabs that have product information under each tab for my customers to view. How do I do this?

Let's start at the very beginning.
#1 Have you defined a Local Site in DW yet?  Without this critical step, DW can't manage links & assets for you.
Simplified site setup in Dreamweaver CS5 | Learn Dreamweaver CS5 & CS5.5 | Adobe TV
Once your site is defined -- including the remote server log-in credentials, you can upload files or folders of files by simply clicking the UP arrow which PUTS files to remote server.  See screenshot.  Conversely, the DOWN arrow GETS files from the remote server and saves them to your Local hard drive.
Nancy O.

Similar Messages

  • How to create an arrow in a table

    How to create an arrow in a table in numbers.
    If you have plus or minus numbers, I want to know a green arrow on the increase is positively or a red arrow if it is negative number

    Maybe something like this?

  • How to create t-code for a table and how to create transaction variant???

    Hi,
    I have created a custom table zsark.
    Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
    Now,
    1.     how to create transaction code to a table. Can any one give me the 
                    staps??
    2.     how to create transaction variant for the above requirement???
    Thanks & Regards,
    Sarkar

    Hi
    1 Goto SE93 transaction
    2 Choose 5th option Transaction with parameters
    3 Give transaction : SM30, Check Skip Initial Screen Press Enter
    4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
    5 Press one more time F4, choose update , mark it X on right side.
    6 save the transaction.
    Thanks
    sandeep
    reward if helpful

  • How to create screen resolution in bdc table control

    hi gurus
    can anyone suggest me
    how to create screen resolution in bdc table control
    thanks&regards
    mark.

    Hi ,
    Using CTU_PARAMS table for screen resolution .
    For this sample code.
    This is for Transation  FB60.
    report ZZFB60
           no standard page heading line-size 255.
    tables t100.
    PARAMETERS : p_file1  like  rlgrap-filename,
                 p_doctyp like  RF05A-BUSCS,
                 p_invdat like  INVFO-BLDAT,
                 p_posdat like  INVFO-BUDAT.
    CONSTANTS  :  C_TRANS_FB60(4) VALUE 'FB60'.
    *Parameter string for runtime of CALL TRANSACTION
    data : l_option type ctu_params,
           l_subrc type sysubrc.
    DATA :  l_mstring(150).
    data      accnt type char17.
    data       : day   type char2,
                 month type char2,
                 year  type char4,
                 date1 type char10,
                 date2 type char10.
    data      :  cnt(2) TYPE n,
                 cnt1 type i,
                 fld(25) TYPE c.
    data : begin of excel occurs 0,
            fieldname(255) type c,
           end of excel.
    DATA:BEGIN OF it_mess OCCURS 0,
             msgtyp(5),
             lms(200),
              msgv1(50),
         END OF it_mess.
    data: begin of t_record occurs 0,
             BUKRS(004),
            ACCNT(017),
            XBLNR(016),
            WRBTR1(016),
            WAERS(005),
            SECCO(004) ,
            SGTXT(050),
            HKONT(010),
            WRBTR2(017),
            MWSKZ(002),
            GSBER(004),
            KOSTL(010),
         end of t_record.
    *Internal Table for Header Data
    DATA :  BEGIN OF t_head OCCURS 0,
            BUKRS(004),      "Company Code
            ACCNT(017),      "Account or Vendor
            XBLNR(016),      "Reference
            WRBTR1(017),     "Amount in document currency
            WAERS(005),      "Currency
            SECCO(004),      "Section Code
            SGTXT(050),      "Text
            END OF t_head.
    *Internal table for Item Data
    DATA :  BEGIN OF t_item OCCURS 0,
            ACCNT(017),      "Account
            HKONT(010),     "GL Account
            WRBTR2(017),    "Line item Amount in document currency
            MWSKZ(002),     "Tax Code
            GSBER(004),     " Business Area
            KOSTL(010),     "Cost centre
            END OF t_item.
    DATA: IT_BDCDATA      LIKE  BDCDATA OCCURS 0 WITH HEADER LINE,
          IT_BDC_MESSAGES LIKE  BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    *include bdcrecx1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
      PERFORM  file_selection.
      PERFORM  data_upload.
      PERFORM  table_control.
    start-of-selection.
    l_option-defsize = 'X'.
    l_option-dismode = 'A'.
    l_option-updmode = 'S'.
    day = p_invdat+6(2).
    month = p_invdat+4(2).
    year =  p_invdat+0(4).
    concatenate day month year into date1 SEPARATED BY '.'.
    day = p_posdat+6(2).
    month = p_posdat+4(2).
    year =  p_posdat+0(4).
    concatenate day month year into date2 SEPARATED BY '.'.
    *perform open_group.
    loop at t_head.
    CLEAR    IT_BDCDATA.
    REFRESH  IT_BDCDATA.
    perform bdc_dynpro      using   'SAPLACHD'         '1000'.
    perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
    perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
    perform bdc_dynpro      using   'SAPMF05A'          '1100'.
    perform bdc_field       using   'BDC_OKCODE'        '/00'.
    perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
    perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
    perform bdc_field       using   'INVFO-BLDAT'       date1.
    perform bdc_field       using   'INVFO-BUDAT'       date2.
    perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
    perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
    perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
    perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
    perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
    cnt = 1.
    cnt1 = 1.
    loop at t_item where accnt = t_head-accnt.
    *if cnt > 4.
    *cnt = 4.
    *endif.
    if cnt1 gt 1.
    CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
    perform bdc_field      using   fld                   'X'.
    perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    perform bdc_field       using 'BDC_OKCODE'        '=0005'.
    endif.
    perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    perform bdc_field       using   'BDC_OKCODE'        '/00'.
    CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-hkont.
    CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
    perform bdc_field  using       fld                t_item-wrbtr2.
    CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-mwskz.
    CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-gsber.
    CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-kostl.
    perform bdc_field      using  'BDC_CURSOR'  fld.
    *CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
    *perform bdc_field      using   fld                   'X'.
    cnt1 = cnt1 + 1.
    *cnt = cnt + 1.
    *if cnt > 1.
    *perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    *perform bdc_field       using 'BDC_OKCODE'        '=0005'.
    **perform bdc_field       using 'BDC_OKCODE'        '=0006'.
    *endif.
    endloop.
    perform bdc_dynpro      using 'SAPMF05A' '1100'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BS'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    *perform bdc_transaction using 'FB60'.
    CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA  options from l_option
                                 MESSAGES INTO IT_BDC_MESSAGES.
    perform error.
    perform errordownload.
    endloop.
    *perform close_group.
    *Form  data_upload
    FORM data_upload .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME              =  p_file1
       FILETYPE              = 'DAT'
      TABLES
        DATA_TAB             =  t_record.
    ENDFORM.                    " data_upload
    *Form  file_selection
    FORM file_selection .
    CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  =  syst-cprog
          dynpro_number =  syst-dynnr
          field_name    = 'p_file1'
        IMPORTING
          file_name     =  p_file1.
    ENDFORM.                    " file_selection
    Form  BDC_DYNPRO
    FORM BDC_DYNPRO using program dynpro.
      CLEAR IT_BDCDATA.
      IT_BDCDATA-PROGRAM = PROGRAM.
      IT_BDCDATA-DYNPRO = DYNPRO.
      IT_BDCDATA-DYNBEGIN = 'X'.
      APPEND  IT_BDCDATA.
    endform.
    *Form  BDC_FIELD
    FORM  bdc_field using fnam fval.
      CLEAR  IT_BDCDATA.
      IT_BDCDATA-FNAM = FNAM.
      IT_BDCDATA-FVAL = FVAL.
      APPEND  IT_BDCDATA.
    ENDFORM.
    Table Control
    FORM table_control .
      LOOP AT t_record.
        ON CHANGE OF t_record-accnt.
          MOVE-CORRESPONDING t_record TO t_head.
          APPEND t_head.
        ENDON.
      loop at t_head.
             t_item-accnt   =  t_head-accnt.
             t_item-hkont   =  t_record-hkont.
             t_item-wrbtr2  =  t_record-wrbtr2 .
             t_item-mwskz   =  t_record-mwskz .
             t_item-gsber   =  t_record-gsber .
             t_item-kostl   =  t_record-kostl.
        APPEND t_item.
    endloop.
         If t_record-level = 'H'.
             t_head-bukrs   =  t_record-text1.
             t_head-accnt   =  t_record-text2.
             t_head-xblnr   =  t_record-text3.
             t_head-wrbtr1  =  t_record-text4.
             t_head-waers   =  t_record-text5.
             t_head-secco   =  t_record-text6.
             t_head-sgtxt   =  t_record-text7.
          APPEND t_head.
         else.
            t_item-accnt   =  t_head-accnt.
            t_item-hkont   =  t_record-text1.
            t_item-wrbtr2  =  t_record-text2.
            t_item-mwskz   =  t_record-text3.
            t_item-gsber   =  t_record-text4.
            t_item-kostl   =  t_record-text5.
         APPEND t_item.
         endif.
      ENDLOOP.
    ENDFORM.
    FORM error .
      LOOP AT IT_BDC_MESSAGES.
        IF IT_BDC_MESSAGES-msgtyp = 'E'.
       SELECT single  * FROM t100  WHERE
                                    sprsl = it_BDC_MESSAGES-msgspra
                                    AND   arbgb = IT_BDC_MESSAGES-msgid
                                    AND   msgnr = IT_BDC_MESSAGES-msgnr.
          IF sy-subrc = 0.
            l_mstring = t100-text.
            IF l_mstring CS '&1'.
              REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
              REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
              REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
              REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
            ELSE.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
            ENDIF.
            CONDENSE l_mstring.
            it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
            APPEND it_mess.
          ELSE.
            it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
            APPEND it_mess.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.
    form errordownload.
    *down the internal table to excel file.
    call function 'EXCEL_OLE_STANDARD_DAT'
               EXPORTING
                    file_name                 = 'c:/Error.xls'
               TABLES
                    data_tab                  = it_mess
                    fieldnames                = excel
               EXCEPTIONS
                    file_not_exist            = 1
                    filename_expected         = 2
                    communication_error       = 3
                    ole_object_method_error   = 4
                    ole_object_property_error = 5
                    invalid_filename          = 6
                    invalid_pivot_fields      = 7
                    download_problem          = 8
                    others                    = 9.
    endform.
    Reward if useful
    Regards,
    Narasimha
    Edited by: narasimha marella on May 13, 2008 12:12 PM

  • How to create dependent LOV in Advanced Table.

    Hi,
    How to create dependent LOV in Advanced Table. Pls help send me the steps.
    Thanks in Advance,
    Hanimi....

    Hi,
    Not sure whether you need dependent LOV or dependent poplist. But anyways, you can refer the below link for Dependent LOV
    http://oraclearea51.com/component/content/article/98-oa-framework/372-dependent-lov-in-oaf.html
    and for Dependent Poplist refer the below link:
    http://oraclearea51.com/component/content/article/98-oa-framework/370-dependent-poplist-in-an-advanced-table-in-oaf.html
    Regards,
    Sudhakar Mani
    http://oraclearea51.com/sudhakarmani

  • How to create IDOC for customer defined table

    hi,
    How to create IDOC for customer defined table Records and how to send this IDOC to target system.
      what message type will be used and on receiving system how to post these records.
      thankx.
      pillac.

    Hi,
    You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
    You will have trigger the IDOC using a Report or something after doing the partner profile settings.
    Similary in the target system also, you will have do all the settings.
    Take a look the links to find out what settings needs to be done.
    http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappro.com/downloads/OneClientDistribution.pdf
    Regards,
    Ravi
    Note : Please mark the helpful answers and close the thread if the issue is resolved.

  • How do i get more memory on my mac book air? is says that i can add 2 more gig how?

    how do i get more memory on my mac book air? is says that i can add 2 more gig ??? or wat files can i delete

    Macbook Air memory is soldered to the logicboard.
    You can only get 4GB or 8GB (2012 Models) in the Air when you order it that way.  Otherwise, you're stuck with 2GB.
    Unless you're talking about hard drive space - then it is upgradeable - click HERE to see which one corresponds to your model.

  • How do I share a color-coded Outlook calendar with others in my office that they can see the colors too?

    How do I share a color-coded Outlook calendar with others in my office that they can see the colors too?

    Hi,
    How do you color code the calendar items? From conditional formatting or from categories?
    Please make sure the user has been given reviewer or higher calendar permission to view items colors in Outlook. About how to share calendar in Outlook, please refer to:
    http://office.microsoft.com/en-001/outlook-help/share-an-outlook-calendar-with-other-people-HA010354420.aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

    How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

    The me.com website is not designed for or intended to be accessed by iOS devices. Apple provides support in iOS or seperate Apps for accessing all aspects of MobileMe except for the Accounts section.
    Use MobielMe as intended and you'll have no problems.
    See: http://support.apple.com/kb/ts1673
    Even if you use a different browser to get access to me.com on iOS, you'll find most of it is unusable.
    Other websites that present you with the mobile version have been programmed to do so by their developers. They specifically look for users accessing from 'mobile' devices and switch to the mobile site. Many such sites provide a link to go back to the 'full' site, if not, there's not a lot you can do except use a browser that can pretend not to be a mobile browser.

  • How do I put several iphone 4 home video clips together on Quicktime so that I can watch them together on the one DVD.

    How do I put several iphone 4 home video clips together on Quicktime so that I can watch them together on the one DVD as a movie. And what export setting do I use to play on a DVD player?

    burney1967 wrote:
    How do I put several iphone 4 home video clips together on Quicktime so that I can watch them together on the one DVD as a movie. And what export setting do I use to play on a DVD player?
    QuickTime Player is not itself able to do this. You need a proper DVD authoring solution such as Apple's iDVD.

  • HT201210 my friend connected my iphone to his laptop and now his apple ID is on my iphone- how do I change it back to my apple ID on my phone so that I can purchase from itunes again?

    my friend connected my iphone to his laptop and now his apple ID is on my iphone- how do I change it back to my apple ID on my phone so that I can purchase from itunes again?
    thanks.

    Restore your phone using the last backup that you made. That should put everything back the way it was.

  • How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?

    How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?

    It depends on your car stereo. On the JVC we have you can select either "Head Mode" or "iPod Mode" when you're plugged into the USB port. Ipod Mode lets you select the songs from the iPod although the radio still controls the volume. I believe the Alpine I have does the same thing.

  • I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

    I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

    Yes, you can do all of that via Tools - Forms - More Form Options - Import Data, if you have Acrobat.
    If you only have the free Reader then you can still do it, but it requires a script.

  • How do I upgrade my OS 10.5.8 to 10.6.6 so that I can use Facetime

    How do I upgrade my OS 10.5.8 to 10.6.6 so that I can use Facetime??

    Phone the Apple Store and order a Mac OS X 10.6 DVD.
    (70005)

  • How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    mparker402 wrote:
    So, when the other iTunes account needs to be used, I should log out of Windows and have the other user log in under a different Windows account, correct?  
    M Parker, 
    Yes, since you are trying to keep things separate, that is exactly what you would do.

Maybe you are looking for