How to create a loop for my problem? Please read for more detail.
Hi guys,
I am doing my project and currently i faced one problem and that is more towards looping i guess. My project is about embedding and I had done all the embeding stuffs already but I am only able to embed my barcode into image at starting at coordinate 0,0.
What i want to know is how do i had to structure my loop so that i can embed my barcode even when i start at x=20 and y=30 for example?
currently i used nested for loop which is why i can only start at 0,0.
I wanted to make it something like this:
for<lets make it x=20>
for<lets make it y=30>
<my code retrieve pixel at x=20 y=30>
<my code retrieve pixel of barcode at x=0 y=1>
end
end
end
I wanted to have something like above where i can start at 20,30 but at that certain cooridnate i will starting retrieve barcode pixel at 0,0.
So just say what you don't know how to do, because what I showed is exactly what you need.
So please answer the following:
1.) I have an image of my barcode and I don't know how to paint it onto another image.
or is it
2.) I have a routine that draws a barcode at a fixed location and I don't know how to get it to draw anyplace I tell it.
or
3.) I don't have anything yet, and I want someone to code this for me.
or it is
4.) Les you don't have any idea what I want to do, so here is what I need (pay more attention):
but in any case (well except #3), you'll be better off if you can give us some code to look at and explain what you are specifically trying to do and where you are having problems.
Similar Messages
-
How to create Single Queue for more than one interfaces(XI)
Hi Experts,
I want to set up a separate queue for 3 interfaces which all are outbound IDOC to FTP.
Please let me know ' Hhow to create a queue for multiple interfaces with Quality of Service 'EO''.
Thanks,
Srinivas P.The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated -
How to create a template for more than four column conditions?
Hi
I want to create a report template for a tabular form should have more than 4 column template conditions (more than 12 conditions i need) to get the coloring for row based on the conditions.
so, please tel me how to do a template to meet my requirements.
APEX VERSION: 4.2
Database :11gR2.
Cheers
Tulasi.Tulasi 1243 wrote:
Hi
I want to create a report template for a tabular form should have more than 4 column template conditions (more than 12 conditions i need) to get the coloring for row based on the conditions.
so, please tel me how to do a template to meet my requirements.
VC wrote:I don't think it is possible using the template column conditions...try using some jQuery code that runs on page load.
I am sure this has been discussed here before. Search the forum...good luck.It is possible using a template, and it has been discussed many times...
The trick is to combine classTyler's conditional <tt>class</tt> technique with a custom named column report template.
Determine a class for the row in the query:
select
empno
, ename
, sal
, case
when sal < 1000 then 'low'
when sal between 1000 and 2000 then 'medium'
when sal > 2000 then 'high'
end sal_class
from
empCreate a custom named column report template, referencing the class in the row template:
<tr class="#SAL_CLASS#"><td>#EMPNO#</td><td>#ENAME#</td><td>#SAL#</td></tr>Then create a style sheet to apply the required backgrounds:
tr.low td { background-color: yellow; }
tr.medium td { background-color: white; }
tr.high td { background-color: red; } -
How to create a actionListener for individual JButton in a for loop?
How to create a actionListener for individual JButton in a for loop? Can someone help me?
Do you mean something like this?:
JButton tempButton;
for(int i = 0; i < 10; i++){
tempButton = new JButton("Button " + String.valueOf(i));
tempButton.setActionCommand("action" + String.valueOf(i));
tempButton.addActionListener(this);
// or tempButton.addActionLister(new ActionListener(){...});
frame.add(tempButton);
} -
How to create internal table for a structure in BSP
hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
include type zuvendstr.
data:end of itab_1.
data wa_str like line of itab_1.
loop at itab_1 into wa_str. %>
<tr>
<td><%=wa_str-name%> </td>
<%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPSHi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy -
How to create Search Help for a field in Table control !!
Hello Friends,
I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
SenthilCheck the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
break gblap0.
ws_dynpfld-stepl = mprn-current_line.
LOOP AT i_mprn.
MOVE i_mprn1-mprn TO i_mprn-mprn.
MOVE ws_postcode TO i_mprn-post_code.
MODIFY i_mprn INDEX
mprn-current_line." transporting MPRN POST_CODE.
ENDLOOP.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
gntc LIKE iflot-zzgntc,
END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZZGNTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select Gas Nomination Type Code'
value_org = 'S'
TABLES
value_tab = lt_gntc
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
ws_dyname1 LIKE d020s-prog,
ws_dynumb1 LIKE d020s-dnum,
ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-MPRN'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-POST_CODE'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash. -
How to create a hirarchy for this characteristic having lengh 50?
Hi guru's
I have a scenario like characteristic is having lengh 50.Now I want to create a hierarchy for this characteristic.
But Hirarchy allows maximum lengh 32chrs only.
So could you please let me know how to create a hirarchy for this characteristic having lengh 50?
Thanks in advance
SivanandIsn't this the same question as here:
Hi all, Have a problem, Please let me know urgently.
Why the duplicate postings with different names?? -
How to create a border for a paragraph ?
Can anyone tell me how to create a border for a paragraph ? Is this even possible without creating a table ?
I would like to have the page header with a single line below it and the page footer with a single line above it. Inserting a line seems to force unnecessary space above of below the line and using a table seems to force a blank line below the table also creating unnecessary space.
ThanksThanks, I had the problem with this approach that the line never appeared on each page but adding to the section master would fix it.
Still being able to set a border would be good! I did try using the text box but the border options are pretty inflexible. I was unable to just set the top or bottom borders. Did I miss something basic here or is this option just not available ?
Any idea if this is coming in a future release ? -
How to create Activex object for my Visual C++ object
Hi,
I am working on development on Acrobat 9.0 SDK. I am facing problem is that I can compiled Visual C++ source code to an api. I can test functions on this api on Acrobat 9.0 windows, but I could not test it on IE web browser, because I don't know how to create Activex object from my Visual C++ source code or its api.
I read Acrobat 9 SDK document and found under C:\Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard has two files: Acro9PIWizInstaller.msi and setup.exe. I am not very sure those file are the key to help me to create Activex objects for my api. Are they the one I need to create Activex object? If not, could you please advise me how to create Activex object for my api or C++ codes.
Thanks a lot for any of your comments or advices.
ThaiHi lrosenth,
Thanks a lot for your information.
My question is, on Javascript how do I call a function from .api. Below is my very simple test.
I got a function on BasicPlugin.cpp under C:\Acrobat 9 SDK\Version 1\PluginSupport\Samples\BasicPlugin. See below.
I added BasicPlugin.api on C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins
ACCB1 int ACCB2 MyPluginCommand() {
int num = 5;
return num;
On my HTML file, I create an <Object> below:
<OBJECT id="acrobatapp"
classid="clsid:85DE1C45-2C66-101B-B02E-04021C009402">
</OBJECT>
<OBJECT id="acrobatpdf"
classid="clsid:CA8A9780-280D-11CF-A24D-444553540000" >
<Param name="SRC" value="http://www.adobe.com/devnet/acrobat/pdfs/acrobat_digital_signature_appearances_v9.pdf">
</OBJECT>
On my Javascript. I call function MyPluginCommand() as below, but it is not working. How do I call function MyPluginCommand() on Javascript?
var acrobatapp= document.getElementById("acrobatapp");
var num= acrobatapp.MyPluginCommand();
alert(num);
Thanks for your support,
Thai -
How to create authorization role for just displaying query prefix Q and X.
Hi Expert,
I hope someone can help me on how to create authorization role for just displaying and executing BEX Queries prefix Q and X. I'm currently using SAP BI 7.1.
Actually, I already created one role called : Z_FORINDO_ONLYDISPLAY_QX
where I only put in the Authorization Component (in the Role Maintenance - Tcode 'pfcg'):
-->Manually Business Information Warehouse
--> Manually Business Explorer - Components
Activity : Display, Execute, Enter, Include, Assign
InfoArea : *
InfoCube : *
Name(ID) of a reporting component : *
Type of a reporting component : Calculated key figure, Restricted key figure, Template structure
--> Manually Business Explorer - Components
Activity : Display, Execute
InfoArea : *
InfoCube : *
Name(ID) of a reporting component : Q* , X*
Type of a reporting component : Query
But, the problem is I still can make changes on that queries (Q* and X*). Even, I still can run query with prefix Z. I use S_RS_RREPU Tamplete for Query Display and execution.
Please assist. Very much appreciate your help. Thanks.
Edited by: nadiyah salleh on Mar 18, 2008 11:22 AMQuestion close. This issue has been resolved.
-
Salmple at How to Create Dynamical Object for RTTC
Hi all, I need a sample at How to Create Dynamical Object for RTTC.
you can help me?.Hello Martinez,
I have attached a sample for structure types. With the Where-Used-List on the Create() Method of the various RTTC classes one may find more samples. If you meant with object on OO Type then it is to mention that this is not possible yet.
Regards
Klaus
PROGRAM sample.
DATA: sdescr1 TYPE REF TO cl_abap_structdescr,
sdescr2 TYPE REF TO cl_abap_structdescr,
tdescr1 TYPE REF TO cl_abap_tabledescr,
tdescr2 TYPE REF TO cl_abap_tabledescr,
tref1 TYPE REF TO data,
tref2 TYPE REF TO data,
comp TYPE abap_component_tab,
wa TYPE t100,
xbuf TYPE xstring.
FIELD-SYMBOLS: <tab1> TYPE table,
<tab2> TYPE table.
sdescr1 ?= cl_abap_typedescr=>describe_by_name( 'T100' ).
comp = sdescr1->get_components( ).
sdescr2 = cl_abap_structdescr=>create( comp ).
tdescr1 = cl_abap_tabledescr=>create( sdescr2 ).
tdescr2 = cl_abap_tabledescr=>create( sdescr2 ).
CREATE DATA: tref1 TYPE HANDLE tdescr1,
tref2 TYPE HANDLE tdescr2.
ASSIGN: tref1->* TO <tab1>,
tref2->* TO <tab2>.
wa-sprsl = 'E'. wa-arbgb = 'SY'. wa-msgnr = '123'. wa-text = 'first text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'SY'. wa-msgnr = '456'. wa-text = 'second text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'XY'. wa-msgnr = '001'. wa-text = 'third text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'ZZ'. wa-msgnr = '123'. wa-text = 'fourth text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'E'. wa-arbgb = 'SY'. wa-msgnr = '123'. wa-text = 'ABAP is a miracle'. INSERT wa INTO TABLE <tab1>.
EXPORT tab = <tab1> TO DATA BUFFER xbuf.
IMPORT tab = <tab2> FROM DATA BUFFER xbuf.
LOOP AT <tab2> INTO wa.
WRITE: / wa-sprsl, wa-arbgb, wa-msgnr, wa-text.
ENDLOOP. -
how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store
my problem solve by me
first create apple id
fill credit card details
and complete your account creating process.
than go to app store or itune store
login your acount
click right side - account button
than again login for account setting
next go to payment information and click edit button
when u enter payment infomation
click none button in payment method and click done button.
than ur credit card has been removed.
but rs. 60 will deducted in your account when u doing this process. -
How to create volume slider for flash cs 5 using action script 2.0?
how to create volume slider for flash cs 5 using action script 2.0?the output should like if user want to hear sound in slow pitch,medium pitch or high pitch(slow to high pitch anything).i have attach this sound to button with using this code:
stop();
mySoundBtn.onRelease = function () {
mySoundC = new Sound(this);
mySoundC.attachSound("mySoundClip");
mySoundC.start(0, 10); //10 represents the number of loops
gotoAndPlay(2);
This sound plays till 3-4 scene ahead.
Can anyone help me?Hey thnx Ned.
this sites are really helpful.but,i have used sound through button.so how it is possible to attavh the link with slider.i have created slider also.
Below is my slider code for sound.
onClipEvent (load) {
mySound1 = new Sound();
mySound1.loadSound((myScale)+"/"+(myTanpura)+"/"+(myTanpuraSwar)+"/"+(myTanpuraTempo)+".w av", true);
mySound1.onSoundComplete = function() {
mySound1.start();
mySound1.start(0.058,999);
onClipEvent (enterFrame) {
downloaded = mySound1.getBytesLoaded();
total = mySound1.getBytesTotal();
if (downloaded != total) {
_root.dl = "You have to buy this software...";
} else {
complete = 1;
_root.dl = "";
mySound1.setVolume(ratio * 2);
This code is working for slider.I mean it scrolls the slider.but it dosent make any effect to sound.
Below is my button code.
stop();
mySoundBtn4.onRelease = function () {
mySoundC = new Sound(this);
mySoundC.attachSound("mySoundClip4");
mySoundC.start(0, 300); //10 represents the number of loops
gotoAndPlay("play1");
this is on button's frame.not exactly on button.
Button and Slider both are on diffrent scene.
Can you plese help me out? -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat
Maybe you are looking for
-
I bought a phone from a person on ebay. the phone was working fine until i locked myself out (forgot my passcode), upon restoring the iphone through itunes, it asks for an apple id for the person who activated the iphone. I the seller doesnt know the
-
Photoshop Elements 11 won't open
Just downloaded PSE11; can't get it to open. Desktop icon does nothing; starting it from the .exe file gets things going, but when it reaches the 'initializing' phase, up pops an error message: "Adobe Photoshop Elements 11 has stopped working. A prob
-
Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!
-
T410 display card error.[Help!!]
Hi, My laptop is T410 2522PB7. I have 2 critical issues. 1. After i upgraded the display card driver to latest version. i got a error at my daily use(especially when i watching a movie or playing game). BTW. Cannot attach image from my HDD? the error
-
Refactoring Behavior Problem?
I have created 2 applications which are deployed as ADF Jar Libraries. Inside these apps are fragment taskflows which I am using in a master application. When I run the master app, ADF complains that there are 2 references to "view/DataBindings.cpx"