How to create a new business group in production instance?

Hi All
How can I create a new Business Group in Oracle Apps in a production Instance where there wont be any HRMS responsibility. Do I need to create a new Business Group through Inventory responsibility ? Any documents about this issue?
Thanks and Regards
M.A.Rahman

why do you need to create a new business group? To implement HR? If so, linking a HR responsibility to your user, is one of the few steps to go anyway.
How you did it on the test environment?
Why not link a hr resp to your user temporarily, and disable it later.
I'm always afraid to answer this kind of questions, since the real requirement is not described.

Similar Messages

How to create a new security group and assignments of rigths?

Hi,
In our current "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, we are a couple of administrators using the same user account to logon to the "https://10.10.x.x/ccmadmin/showHome.do" homepage.
Where can I create a new user group and assign the appropriate rights to the group, and add users to the group? Or is it another approach that I need to follow instead of the way that security rights a made in a Microsoft Active Directory?
Is there any place that I can read or view examples on how the setup can be done? I would like to have it in the way that everyone has their personal user account and use this to logon the administration-web page instead of an account that everyone uses.
Kind regards,
Carl-Marius

why do you need to create a new business group? To implement HR? If so, linking a HR responsibility to your user, is one of the few steps to go anyway.
How you did it on the test environment?
Why not link a hr resp to your user temporarily, and disable it later.
I'm always afraid to answer this kind of questions, since the real requirement is not described.

How to create a new Business Unit

Hello,
I have problem.
Can anyone tell me
1 : How to create a new Business Unit, New Company from Jd Edwards screen means webpage.
2 : Can i find the User Defined Codes means UDC in jd edwards screen.
Thanks,
Shakti Prasad Priyakumar.

First, let me confirm that you are on JDE World, and not JDE Enterprise One/One World. They are very different environments. JDE World is normally a green screen, IBM Client Access based system.
If you are on a JDE World menu and you have the proper security access, just type in UDC on the command line and hit <ENTER>. You hopefully are in a test environment when you do this, since it sounds like you have very little knowledge of JDE. The UDC screen will come up. If you know the system code and code of the UDC table you want to look at, you can key them in and bring up that table. Otherwise, do F5. That will let you search by system code and see what table codes are available in each system. If you are not sure what UDC table you need, you can look at the JDE data dictionary for the data item you are interested in and that will tell you the UDC table, if the data item is UDC based.
As for setting up new business units and company, get to the main general ledger menu. Don't remember the exact path, but you want to get into the setup/define menu for general ledger accounts. There will be separate options there for maintaining companies and for maintaining business units. You want to play with this in a test environment before you do anything for real.
Hope this helps a bit.
John Dickey

Creating a NEW Business Group, NO Security Profile generated

Platform : R12 running on Linux86 --> FRESH install ( NOT Vision db )
Resp : Global HRMS Super User
Problem : No Security Profile generated for NEWLY created Business Group
After creating a NEW business group ( ie. BG1 )
I am able to see both BG1 and Setup Business Group ( I an view both Business Groups via Organization screen)
When I access the Security Profile screen using the same resp "Global HRMS Super User"...
I can ONLY see the default security profile ( Setup Business Group )...
I am NOT able to view the default security profile ( BG1 ) that should have been created when I created my new business group earlier.
NOTE : If I use the VISION db, and do the exact same thing... I can see both Security Profiles.. and both Business Groups.
If I use the FRESH db, I can see both Business Groups... BUT... only 1 Security Profile... ( Setup Business Group )
WHY ??
Someone please HELP !!
Thank-you
Charlie :)

hi charlie i tried the same in my vision instance, i am able to view my BG at the security profile level,
when you query the system profiles,have you enabled the display checkbox at the responsibility level and try, or create an new responsibility and try... let me know the navigation you done clearly,
Raj

Address book in OSX 10.7.2: how to create a new contacts group?

Hi.
I have upgraded to OSX 10.7.2 on my MacBook Pro.
How can I create a new contacts group using addresses in my Address Book?
The idea is to use the group to send emails to a bunch of people without having to write them in individually.
(Before, on on OSX 10.5, I went into my Address Book, clicked on the left to "Add a Group" and then slid in the contact files I wanted to include in the group.
Tx for helping!
Ray

Open adress book with 2 pages exposed and reach the position with the groups listed on the left page.
In the bottom left corner there is a "+" ... just click on it
Even easyer... press shift command N

How to create a new function group in EEWB creating new fields.

Hi gurus,
Iu2019m creating an enhancement of the BP Object through EEWB, but when I finish I received the following message:
Message no. FL030
Diagnosis
You attempted to add a function module to a function group that is already full. A function group can contain a maximum of 99 function modules.
Procedure
Create a new function group or reorganize the existing one.
Could you guys kindly guide me in how to create or reorganize the function groups in order to include the total of my custom fields?
Thanks in advance!

Hi,
the issue has been investigated in the customer system.
You're trying to create a table extension using EEWB and the table has 55 fields and each field has checktable.
EEWB creates for each field with checktable 2 function modules. However, there is a limitation that one function group
can contain only 99 function modules. That's why you got the error.
Possible solutions can be following:
1. Design question: Do you really need checktable for all fields? Do you need all 55 fields in one table? Otherwise, you can split it into two tables.
2. Instead of using checktable, you can also use domain fixed values. For that you have to define your own data element and domain with fixed values.
Regards,
Steve

How to create a new business partner for notification with function module?

Hello,
I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
Thanks a lot!
Morgan

when I look at the function you can transfer the partner in NOTIFPARTNR table.
You must already have defined the appropiate partnerroll in customizing for you're businesspartner
or do you have another problem with this function ?

How to create a New user group for AD-HOC

when i select a work area for ad-hoc i dont find any exisitng user groups...
i get a blank screen with an error saying no usergroup
is there a possibility to copy these across clients?
pls advise
thanks

Hi,
sorry but my english isn't the best so i try an answer again and hope i'm on the right way:
Step by step guide for example client 100 and 200 on the same system. System 100 has usergroup test001 and client 200 has not.
1. call sq03 in client 100
2. pick the transport truck
3. pick radiobutton [Export] and and radio button [Transport user groups] fill in the field [User groups] with test001.
4 Execute and write(copy to clipboard) down the transport number
5 logon to client 200
6. call sq03
7.pick the transport truck
8. pick radiobutton [Import] and radio button [Transport user groups] fill in the field [Dataset with imports] with the transport number.
9. Execute
After that your user group should be in client 200.
If you want to transport between different systems you have export the transport request first.
Regards
Bernd

New Business Group in HR 11.5.7 FP.G.

New Business Group in HR 11.5.7 FP.G.
Hi all,
We have Oracle HR 11.5.7 (Family Pack G), SSHR 5.2, WorkFlow 2.6.0.
We currently have two different Business Groups for Country A (Main Banking Operations) and Country B (Banking Operations Abroad).The Human Resources Dept wants to create a New Business Group to hold information for an Insurance Company that belongs to the Group (base at Country A) but whose employees'(currently they are not held in Oracle HR) have different collective agreements and reporting structures.Also users of Insurance not to be able to see data from banking Operations, but some users in banking to be able to see all data.
Firstly, can anyone help us regarding the pros/flexibility and cons/limitations of creating a New Business Group for the purpose described above?
From the way I see it if we create a New Business Group we will have more overhead even if the Flexfield Structures will remain the same.If we use the existing Country A BG to hold this info we will have to change all responsibilities/users/ profiles to restrict access based on less clearly defined lines as opposed to a New BG.
If we will proceed with the creation of a New Business Group (Users requested for a new BG to be created) does anyone knows or have an implementation/priority step guide/plan for a new BG not limited just to the creation of the Organization details?
Does anyone have an indication as to the average time required to setup a new BG as described above with all related information completed(security/ responsibilities/Organizations/positions/jobs/locations/grades/ elements/element links/special info/etc)?
Lastly, we recently setup SSHR 5.2 for the purposes of Online Appraisal System for the BG of Country A-Main Banking Opreations. Is there any impact that we have to consider, regarding the new BG?
I hope someone can give me some feedback!
Thanking you in advance for your much appreciated help.
Best regards,
Elena

Dear 'thierry' and 'HCMgaclark'
Thanks a lot for your replies.
In case I convince Key Business users to use the existing BG is there an easy way to exclude these new employees from showing in all reporting unless we want to display them?
One reason that will cause us difficulties to do that is the fact that we are not using the Position/Organization Hierachies of the HR. instead we use an additional Organization Flexfield to hold a code that represents our organizational structure due to our Payroll links.
We use Discoverer 4.1.41.05 for reporting purposes. We created our own EUL and have 2 BUsiness Areas, one for each BG.Users connect as Super Users (Responsibility). If we add these employees in the existing BG, what worries me is that we have to specifically exclude from each report the new employees and structures while in some cases a user should be able to see both.
is there an easy way out of these problems?
If we eventually decide to use a separate BG does anyone knows or have an implementation/priority step guide/plan for a new BG not limited just to the creation of the Organization details?
Thanks a lot for your time and help.
Best regards,
Elena

BP: How to hide "Validity Period" on screen Create a new Business Partner

Hi,
On screen Create a new Business Partner, I want to hide field Validity Period
-> Please tell me how to do in Customizing
Thanks and Best regards
Ms.Minh

Hi,
For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
Regards
Prasad AV

I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
Thanks

Hi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran

ERROR :APP-PER-289381 While Creating New Business Group

Hello,
When i am creating new business group in new fresh implementation i am find this error.
APP-PER-289381: A business group with this name exists. Please enter a different name.
I have only Default business group: 'Setup Business group'
Please can any provide a solution for this.. Your early response will highly appreciated.
Thanks
Mohsin

Hi Mohsin,
whatever name you are trying just run the below query to check if it already exists or not.
select * from apps.per_business_groups where name = 'Give here the name you are tyring'
If this returns any row means name already exist in deed. You can rename the existing business group and then create new on. However, if name doesnt exist, wait for any other reply in the forum.
Thanks,
Avinash

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to create a new value for template classification??

I want to classify a workflow template, I mean I will not classify my template as a general task. Using TA PFTC_CHG I get a list with all the entries that a customized in my system. My question is how to create a new entry in that list? System is 46C.
thanks in advance for any hints
Jochen Winler

Hi Jochen,
Follow the customiztion path:
SAP Web Application server->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes
(For 4.6c the path is:
Basis Components->Business Mgmt->SAP Business WF->Basic Settings->Maintain task classes)
By this you can maintain task class entry as you required.
Hope this helps.
Pls. close the thread once your problem is solved.
Regds,
Akshay Bhagwat
Note: Pls. reward with points if it helps:)
Message was edited by: Akshay Bhagwat
Message was edited by: Akshay Bhagwat

How to create a new business group in production instance?

Similar Messages

Maybe you are looking for