How to create a query using the requirements given ? step by step plz

REQUIREMENTS
1) Model- Use multiprovider ZXT_MXXX as infoproviders
2) Query- copy ZXT_MXXX_QYYY as head start
b. Fields for output
1. Hourly Rate-- I know its dataflow .It comes from infotype IT yyyy
Program name MPyyyy00 and query name QXXXX-XXXX
So can I Get this feild to Query Designer
2. CC /WBS/IO on ITyyyy--?
I know dataflow .they come from infotype IT yyyy
Program name MPyyyy00 and 3 different fields.
So how can I Get cc/wbs to Query Designer?
Can anyone suggests steps to do it plz..

Check the ZXT_MXXX multiproivder is based on what all infoproviders..
Check in your infoproviders..for this CC /WBS/IOfield..
If it is avialable in the underlying infoproviders, it should be available for your reporting on multiprovider..
Regards
Manga

Similar Messages

How to create a partition using the free space of an existing[SOLVED]

Hi Guys,
Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
Thanks.
Please see this post:
https://bbs.archlinux.org/viewtopic.php?id=109402
Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
Older computer:
2 GB ntfs - MicroXP
8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
20 GB ntfs - games partition
Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
New computer:
20 GB Windows 7
10 GB Arch Linux + home dir
50 GB games partition
Rest of the space is ext4 mounted to /media
Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
Last edited by DSpider (2010-12-03 13:02:26)

How to create iSCSI target using the entire drive?

This sounds silly, but after setting up the DL4100 in RAID 5, I could not assign the entire 11.89TB to an iSCSI target... Only integer numbers seem to be the valid input. And the only choice of TB or GB offered no help because I could not enter: 11890 GB either?! What am I missing?

Thanks to all who have responded....
Here's my take: 4TB x4 in RAID 5 = 11.89TB but via iSCSI creation will result in 0.89TB unallocable to iSCSI due to the GUI disabling non-interger values (ie: no decimal points). That is 890GB of storage that is supposedly used for firmware upgrades, logs, etc?!
Snooping around I noticed that the validation is only performed via javascript and a quick re-POST to the unit of the params can trigger modification/creation of a non-integer iSCSI volume sizes. Please note that you can only grow volume sizes and not shrink them! Below is a walk-thru of how to do this:
Disclaimer: *WARNING: USE AT YOUR OWN RISK*
1) Create the iSCSI volume as per normal but at the integer value less than what you intend (eg: if you wanted 1.5TB, create 1TB) then wait for the iSCSI volume to be created.
2) Use a web browser with debugging turned on and capturing traffic. For my example I am using Firefox and hit F12 to fire up the debug tool. Pick "Network" and you will see Firefox start picking up all traffic to the DL4100.
3) Go into the iSCSI volume and choose "Details" to modify it. Put the current size as the modified size and click "Apply". Look in the list of messages to locate a POST message "iscsi_mgr.cgi" that has a Request body with a "size" parameter and select that to be resent.
4) In this copy of the same message, look in Request Body and the list of parameters being passed back to the unit. You should find one of the parameters called "size". This value is sent to the unit in GB... Change the value to a GB value that you desire (eg: 1TB would appear as "1000", so you can change it to "1500" for 1.5TB) and then re-POST this POST message back to the unit.
5) Wait for the update to transact and verify that your iSCSI volume has indeed been resized to a "non-Integer" TB value.
That's it! I hope this helps others who have been trapped by this limitation. Please be mindfull not to allocate all your dive space since as Bill_S has mentioned, some space is required by the system for its own housekeeping operations.
Good Luck!

How to create a listener using the new MDM API

Does anyone have an example on how to create a addrecord listener using the new MDM API?

Refresh!
Hi all,
Looking for some sample codes on the same
Best regards,
Arun prabhu S

How to create a collection using the Reader for PC or Reader for Mac software.

Solved!
Go to Solution.

A collection is a custom set of books and other items that you create from items on the Reader or the library of the Reader™ for PC or Mac® software. It is a unique and convenient way to organize your items. You can organize and personalize your content by creating collections by subject matter, date, genre or anything that best suits your purpose.
Create a collection:
Click the My Library tab.
On the category bar, click Collections.
Click the Create New Collectionbutton.
Enter a collection name and then press Enter on your keyboard. A new collection will be added to the Collections list.
Add books to the collection:
Once you have created the collection, click the My Librarytab.
On the category bar, click to select the book you want to add to the collection. Multiple books can be selected by holding down the Ctrlkey while clicking on the books.
With the book(s) selected, at the bottom of the screen, click the Add to Collectionbutton.
From the menu that pops up, click to select the collection you want to add the book(s) to.
NOTE: The next time you sync your Reader Digital Book, the collection and its contents will be added to your Reader device.

How to create a bridge between the two given GB Ethernet ports.

Hi,
I have a MAC Pro in my test set up. is there any way to create a bridge in between the two given Gigabyte ports and control the bandwidth for the device connected to Ethernet-2 while getting the internet connection from Ethernet-1.

I believe you can manually set the bit rate for the second Ethernet port when it is operating as Ethernet Sharing (essentially turning that port into a limited Router).
There are no standard tools in Mac OS X for inspecting the packets there, but there may be tools available for networking developers/troubleshooters to do that.
When that feature is enabled, the port appears from your Mac to have a "self-assigned" IP Address -- a semi random Address in the 169.254.xxx.yyy range. From the connected devices, it will appear to have a legitimate private Router Address, often 192.168.1.1

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
 vbeln type likp-vbeln, "Delivery
 erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
 kunnr type likp-kunnr, "Ship-To Party
 kunag type likp-kunag, "Sold-to party
 traty type likp-traty, "Means-of-Transport
 end of t_likp.
types: begin of t_lips,
 vbeln type lips-vbeln, "Delivery
 posnr type lips-posnr, "Delivery item
 matnr type lips-matnr, "Material Number
 arktx type lips-arktx, "Short Text for Sales Order Item
 lfimg type lips-lfimg, "Actual quantity delivered
 netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
 vgbel type lips-vgbel, "Doc no of the reference document
 end of t_lips.
types: begin of t_vbpa,
 vbeln type vbpa-vbeln, "SD DocumenT Number
 posnr type vbpa-posnr, "Item number
 parvw type vbpa-parvw, "Partner function
 kunnrb type vbpa-kunnr, "Customer Number 1
 end of t_vbpa.
types: begin of t_kna1,
 kunnr type kna1-kunnr, "Customer Number 1
 name1 type kna1-name1, "Name 1
 ort01 type kna1-ort01, "City
 adrnr type kna1-adrnr, "Address
 end of t_kna1.
types: begin of t_li_vbpa,
 vbeln type likp-vbeln, "Delivery
 erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
 kunnr type likp-kunnr, "Ship-To Party
 kunag type likp-kunag, "Sold-to party
 traty type likp-traty, "Means-of-Transport
 vbeln1 type lips-vbeln, "Delivery
 posnr type lips-posnr, "Delivery item
 matnr type lips-matnr, "Material Number
 arktx type lips-arktx, "Short Text for Sales Order Item
 lfimg type lips-lfimg, "Actual quantity delivered
 netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
 vgbel type lips-vgbel, "Doc no of the reference document
 vbeln3 type vbpa-vbeln, "SD DocumenT Number
 parvw type vbpa-parvw, "Partner function
 kunnrb type vbpa-kunnr, "Customer Number 1
 end of t_li_vbpa.
types: begin of t_final,
 vbeln type likp-vbeln, "Delivery
 erdat type likp-erdat, "Date for rec creation
 kunnr type likp-kunnr, "Ship-To Party
 kunag type likp-kunag, "Sold-to party
 traty type likp-traty, "Means-of-Transport
 vbeln1 type lips-vbeln, "Delivery
 posnr type lips-posnr, "Delivery item
 matnr type lips-matnr, "Material Number
 arktx type lips-arktx, "Short Text for Sales Order Item
 lfimg type lips-lfimg, "Actual quantity delivered
 netpr type lips-netpr, "Net Price
 vgbel type lips-vgbel, "Doc no of the reference document
 vbeln3 type vbpa-vbeln, "SD DocumenT Number
 parvw type vbpa-parvw, "Partner function
 kunnrb type vbpa-kunnr, "Customer Number 1
 name1 type kna1-name1, "Name 1
 ort01 type kna1-ort01, "City
 adrnr1 type kna1-adrnr, "Address
 name2 type kna1-name1, "Name 1
 ort02 type kna1-ort01, "City
 adrnr2 type kna1-adrnr, "Address
 name3 type kna1-name1, "Name 1
 ort03 type kna1-ort01, "City
 adrnr3 type kna1-adrnr, "Address
 end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
 device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
 language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
 canceled = 1
 device = 2
 form = 3
 options = 4
 unclosed = 5
 mail_options = 6
 archive_error = 7
 invalid_fax_number = 8
 more_params_needed_in_batch = 9
 spool_error = 10
 codepage = 11
 others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
 form = 'Z9BT_DELIVERY'
 language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
 form = 1
 format = 2
 unended = 3
 unopened = 4
 unused = 5
 spool_error = 6
 codepage = 7
 others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
 element = 'ITEM_LIST'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
 unopened = 1
 bad_pageformat_for_print = 2
 spool_error = 3
 codepage = 4
 others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
 unopened = 1
 bad_pageformat_for_print = 2
 send_error = 3
 spool_error = 4
 codepage = 5
 others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
 from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
 a~erdat
 a~kunnr
 a~kunag
 a~traty
 b~vbeln
 b~posnr
 b~matnr
 b~arktx
 b~lfimg
 b~netpr
 b~vgbel
 c~vbeln
 c~parvw
 c~kunnr
 into table it_li_vbpa
 from likp as a
 left outer join lips as b on a~vbeln = b~vbeln
 inner join vbpa as c on b~vgbel = c~vbeln
 where a~vbeln in s_vbeln and
 c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
 name1
 ort01
 adrnr into table it_kna1 from kna1
 for all entries in it_li_vbpa_temp
 where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How to create a table in the file using java code.?

HI,
I should export the data from the view objects to a word document. I have done that but I should
display the data in the form of a table.
Kindly come up with the necessary information on how to create a table in the file using java.
Thanks,
Phani

Hi, Thank you for responding to my query.
The below are the details of my code.
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding StudentDetailsContent =
(DCIteratorBinding)dcBindings.get("StudentView1Iterator");
OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
Row currentRow =
StudentDetailsContent.getRowSetIterator().first();
Object a[]= currentRow.getAttributeValues();
int i;
for(i=0 ;i<=a.length;i++){
w.write(a.toString());
w.write(" ");
w.flush();
I am usning this coding to achieve the task of exporting data to file.
I need to display this information in the table that is where I need help from you people.
Thanks,

How to create a tcode using sap query

Hi
I have created a query using SQ01. It is working fine. But I want to create a transaction code for that. How can we achieve this?
Regards.
Hari

Hi,
Go to se93 and select the create button.
You will then be asked to writed down the tcode of your choice then create a short text for that tcode.
Select the 2nd option button w/c is the "Program and Selection Screen (report transaction)." Press enter.
Then key in the program name and the variant you saved in the program.
When transporting to Prod, Save the variant there as well.
If you placed "DEFAULT" in the creation of tcode, you should also save "DEFAULT" variant in production
Thanks,
Reward If Helpful.

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

How we create abap query

how we create abap query can any1 tell me?

Reporting tool :Standard reports
Purpose :Provide solutions for your most frequent reporting requirements
Advantages :Can be used immediately
No developments required
Limitations :Limited flexibility
Output fields cannot be selected as required
HIS
Purpose :Hierarchies are displayed as graphics
Reports are executed using selected structures or substructures, that is, using preselected sets of objects
Advantages :User-friendly method of displaying hierarchical structures
Integration with InfoSet Query and standard reports
No need to switch from one HR application to another if you want to execute reports from different applications
Little training required
Limitations : Limited flexibility
Tool is used to execute standard reports and customer reports
It cannot be used to create reports
InfoSet Query
Purpose :Intuitive, general SAP reporting tool used to create customer reports
Enables you to create reports for all areas of HR
When InfoSet Query is accessed from Human Resources (HR), the Query area and User group parameters already contain values and you can only perform ad hoc reporting. If InfoSet Query is accessed this way, it is called Ad Hoc Query in HR (see HR in InfoSet Query).
Advantages :User-friendly interface
Very easy to use
No programming required
If integrated with SAP Query, you can continue processing queries using SAP Query
Set operations enable you to create sets of objects as required for which data must be output
Can be included in roles using a suitable InfoSet
Limitations :InfoSets and user groups must be defined in SAP Query before you can use InfoSet Query
Multiline lists cannot be displayed
SAP Query
Purpose :General SAP reporting tool used to create customer reports
Individual definition of user groups, InfoSets, and queries
Advantages :Extremely flexible
No programming required
Queries can be provided in the SAP Easy Access menu
Includes numerous options for aggregating data, performing calculations, and displaying graphics
Enables you to display multiline lists
Enables you to define one basic list and several statistics and ranked lists for each query
Limitations :Restricted to data from the R/3 System
Each HR query can process data from just one HR logical database:
PNP: Administration, Time Management, and Payroll
PCH: Generally for all areas, but particularly suitable for reporting on data from Personnel Planning
PAP: Recruitment
Requires much more training than other options
Limitations:Data is extracted from OLTP systems, that is, real-time data is not accessed
Business Information Warehouse
Purpose :Analytical reporting tool used for information and decision-making purposes
Advantages : Extremely flexible
Facilitates complex calculations (calculation of averages, time series comparisons)
Enables you to access non-SAP data
Easy to use
Uses OLAP technology
Includes detailed Business Content (HR extractors, InfoCubes, key figures, and standard queries
i think it is adhoc query not abap query

How to create a query to see Opening stock and closing stock as on particul

Hi All,
How to create a query to see Opening stock and closing stock as on particul.
Regards
Albaik

Hi,
In BI 0IC_C03 will provide u the required information and also having standard queries provided by the SAP.
Plz find the list of Queries provided by the SAP.
=======================================================================================================
Inventory turnover      0IC_C01_Q0001
Range of coverage - quantity      0IC_C01_Q0002
Range of Coverage - Value      0IC_C01_Q0003
Range of coverage of finished goods - quantity      0IC_C01_Q0004
Range of Coverage of Finished Goods - Value      0IC_C01_Q0005
Range of coverage of raw materials - quantity      0IC_C01_Q0006
Range of Coverage of Raw Materials - Value      0IC_C01_Q0007
Obsolete Stock on Hand      0IC_C01_Q0008
Period-dependent requirement coverage      0IC_C01_Q0009
Value of stock on hand      0IC_C01_Q0010
Quantity of stock on hand      0IC_C01_Q0011
Material consumption      0IC_C01_Q0012
Material Movements      0IC_C01_Q0013
Consignment stock: receipts and issues      0IC_C01_Q0014
Valuated stock: receipts and issues      0IC_C01_Q0015
Material stock and movements      0IC_C01_Q0016
Material Movements (Healthcare)      0IC_C01_Q0020
Material Consumption (Healthcare)      0IC_C01_Q0021
Material Availability      0IC_C01_Q0022
Inventory Turnover Frequency (Value)      0IC_C01_Q0023
Consignment Stock Received and Issued per Unit      0IC_C01_Q0024
Material Consumption (Quantity)      0IC_C02_Q0001
Valuated Stock Receipts and Issues (Quantity)      0IC_C02_Q0002
Range of Valuated Stock (Quantity)      0IC_C02_Q0003
Inventory Turnover      0IC_C02_Q0004
Receipt and Issue Consignment Stock at Customer      0IC_C03_Q0001
Receipt and Issue Quality Inspection Stock      0IC_C03_Q0002
Vendor Consignment Stock Receipt and Issue      0IC_C03_Q0003
Receipt and Issue Stock in Transit      0IC_C03_Q0004
Receipt and Issue of Blocked Stock      0IC_C03_Q0005
Valuated Stock      0IC_C03_Q0006
Stock in Quality Inspection      0IC_C03_Q0007
Stock in Transit      0IC_C03_Q0008
Blocked Stock      0IC_C03_Q0009
Vendor Consignment Stock      0IC_C03_Q0010
Consignment Stock at Customer      0IC_C03_Q0011
Stock Overview      0IC_C03_Q0012
Stock Overview (as of 3.1 Content)      0IC_C03_Q0013
Quantities of Valuated Project Stock (as of 3.1 Content)      0IC_C03_Q0014
Valuated Stock (as of 3.1 Content)      0IC_C03_Q0015
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)      0IC_C03_Q0016
Inventory Turnover      0IC_C03_Q0017
Days' Supply      0IC_C03_Q0018
SUS: Vendor Consignment Stock      0IC_C03_Q0019
Scrap      0IC_C03_Q0020
Inventory Aging      0IC_C03_Q0021
Stock Overview - extended      0IC_C03_Q0022
Demand Supply Match      0IC_C03_Q0023
Warehouse Stock Analytics Inventory Turnover      0IC_C03_Q0024
Warehouse Analytics - Obsolescence and Variance      0IC_C03_Q0025
Stock Overview: Materials      0IC_C03_Q0030
Average Stock Value Over Time      0IC_C03_Q0031
Stock Overview Over Time      0IC_C03_Q0032
Range of Coverage Over Time      0IC_C03_Q0033
==================================================================================================
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 18, 2010 8:06 AM

Unable to create new query using query manager

Hi friends,
I have been trying to create a query using query manager for couple of hours but still not able to.I am following the instructions given in oracle Peopletools 8.52 : Peoplesoft query
Chapter - creating new queries.
Below are the steps I am going through to create new query:
Step - I open the component Reporting Tools-> Query->Query Manager , I don't get the tabbed pages one for search an existing query and another for create new query.
Please follow this link to see how the page is displayed in first step:
http://uploadpic.org/v.php?img=EvMvVAXX1E
Step 2 - When I click on create new query link, I am redirected to a page where it asks for record name to add in the query. But, even this page is not displayed as how it supposed to be
http://uploadpic.org/v.php?img=GzHh3f6krU
Step 3 - Following the above step, when I click on Person record to add into my query I am asked to select the fields that I want to display in the output.
But I somehow do not get the proper tabbed pages where individual pages are there to add the attributes to complete the query like adding multiple records, fields, query, expressions, prompt...etc
http://uploadpic.org/v.php?img=Wbbla3Q3jE
I am neither able to select multiple records in my query nor able to customize my query to get the desired results.
Below is the query that I want to create using query manager:
SELECT P.EMPLID,P.BIRTHDATE, N.NAME, A.ADDRESS1, A.ADDRESS2, A.CITY
FROM PS_PERSON P, PS_NAMES N, PS_ADDRESSES A
WHERE P.EMPLID = N.EMPLID AND
N.EMPLID = A.EMPLID AND
P.BIRTHDATE BETWEEN to_date('1990/1/1','yyyy/mm/dd') and to_date('1991/1/1','yyyy/mm/dd');

Hi,
As I cannot access your screenshot by the blocking of company firewall rules.
I'm guessing currently you are using PT 8.52.00 version, correct?
This should be a bug, that you need to apply the 8.52.0X patch, not sure which patch fix this, you can apply the latest one to solve this issue for no tab page of query manager. (PT 8.52.06)
Hope this helps.
Thanks,
Saxon SI

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

How to create a query using the requirements given ? step by step plz

Similar Messages

Maybe you are looking for