How to create a secondary list of alv grid inside the function module
Hi All,
My requirement is to create a RFC function module to display the alv grid of one table.
i have created that.
while clicking on the records of the alv it should open the secondary list of another table.
My problem is it is not fetching the records of the internal table of the primary list since it is created inside the function module(FUNCTION...ENDFUNCTION).
pls help me on this.
Thanks in Advance.
hi,
READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
here sel_sheet is the internal table for the primary list..
i called the function module "reuse_lav_grid_display" inside Function...Endfunction.
so when i am using READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
inside the user command perform therecords in this internal table is not populating..
pls help me on this.
thanks in advance.
Similar Messages
-
How to create a Sales order with ref to Contract using Function Module
How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?
We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated. -
How do we trap exception inside the function module?
How do we trap exception inside the function module?
Use ABAP Help - CATCH, RAISE for starters. Or take a look at an existing function module, for example.
-
How to create Inbound Idocs in a ABAP program? Any function Module?
Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
perform data_records_wipe
tables
t_data_records.
FORM DATA_RECORDS_WIPE
TABLES
T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
CLEAR: T_DATA_RECORDS_IN-MANDT,
T_DATA_RECORDS_IN-DOCNUM,
T_DATA_RECORDS_IN-SEGNUM,
T_DATA_RECORDS_IN-PSGNUM,
T_DATA_RECORDS_IN-HLEVEL.
modify t_data_records_in.
ENDLOOP.
ENDFORM. " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards -
Adding button in the secondary list and alv grid
Hi all ,
i have devloped an alv grid interactive report as below, my problem is i want to add some button in the secondary list and do some interactions. but i dont know how to do that. i m sending u my code below ,,, plzz suggest what can be done do add that.
<code>
*& Report Z_demo_SALESDOC
REPORT z_demo_salesdoc.
TABLES: vbak, vbap.
TYPE-POOLS:slis.
DATA: BEGIN OF it_vbak OCCURS 0,
vbeln TYPE vbak-vbeln,
ernam TYPE vbak-ernam,
erdat TYPE vbak-erdat,
auart TYPE vbak-auart,
END OF it_vbak.
DATA: BEGIN OF it_vbap OCCURS 0,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-vbeln,
matnr TYPE vbap-matnr,
zmeng TYPE vbap-zmeng,
netwr TYPE vbap-netwr,
END OF it_vbap.
DATA:it_event TYPE slis_t_event.
DATA: t_field TYPE slis_t_fieldcat_alv,
w_field TYPE slis_fieldcat_alv,
t_field1 TYPE slis_t_fieldcat_alv,
w_field1 TYPE slis_fieldcat_alv,
w_layout TYPE slis_layout_alv,
t_sort TYPE slis_t_sortinfo_alv,
w_sort TYPE slis_sortinfo_alv.
CONSTANTS: c_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
c_usercommand TYPE slis_formname VALUE 'USER_COMMAND'.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln MODIF ID m1,
s_erdat FOR vbak-erdat MODIF ID m2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
PARAMETERS:rb1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
rb2 RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN OUTPUT.
IF rb1 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'M1'.
IF screen-name CS 'S_VBELN'.
screen-active = '0'.
screen-input = '0'.
screen-output = '0'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF rb2 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'M2'.
screen-active = '0'.
screen-input = '0'.
screen-output = '0'.
screen-invisible = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
AT SELECTION-SCREEN.
DATA: v_vbeln LIKE vbak-vbeln.
SELECT SINGLE vbeln
FROM vbak
INTO (v_vbeln)
WHERE vbeln IN s_vbeln .
IF sy-subrc <> 0.
MESSAGE e001(q) WITH 'Invalid Sales document'.
ENDIF.
DATA: v_erdat LIKE vbak-erdat.
SELECT SINGLE erdat
FROM vbak
INTO (v_erdat)
WHERE erdat IN s_erdat.
IF sy-subrc <> 0.
MESSAGE e001(q) WITH 'No document available with given date'.
ENDIF.
START-OF-SELECTION.
PERFORM get_data_vbak.
PERFORM build_field_catalog.
PERFORM fill_event.
PERFORM print_data_vbak.
END-OF-SELECTION.
*& Form get_data_vbak
text
--> p1 text
<-- p2 text
FORM get_data_vbak .
SELECT vbeln ernam erdat auart
FROM vbak
INTO TABLE it_vbak
WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
ENDFORM. " get_data_vbak
*& Form build_field_catalog
text
--> p1 text
<-- p2 text
FORM build_field_catalog .
w_field-col_pos = 1.
w_field-fieldname = 'VBELN'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Sales Order'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 2.
w_field-fieldname = 'ERNAM'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Created by'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 3.
w_field-fieldname = 'ERDAT'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Created Date'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 4.
w_field-fieldname = 'AUART'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Order type'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_sort-spos = 1.
w_sort-fieldname = 'VBELN'.
w_sort-up = 'X'.
APPEND w_sort TO t_sort.
w_layout-colwidth_optimize = 'X'.
ENDFORM. " build_field_catalog
*& Form user_command
text
-->RF_UCOMM text
-->RS_SELFIELD text
FORM user_command USING rf_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE rf_ucomm.
WHEN '&IC1'.
IF rs_selfield-fieldname = 'VBELN'.
READ TABLE it_vbak INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
PERFORM get_data_vbap.
PERFORM build_field_catalog2.
PERFORM print_field_data.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. "user_command
*& Form print_data_vbak
text
--> p1 text
<-- p2 text
FORM print_data_vbak .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_GRID_TITLE
I_GRID_SETTINGS = I_GRID_SETTINGS
is_layout = w_layout
it_fieldcat = t_field[]
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
it_sort = t_sort
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
it_events = it_event[]
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
t_outtab = it_vbak
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_data_vbak
*& Form fill_event
text
FORM fill_event .
DATA : st_event TYPE slis_alv_event.
*- Clear.
CLEAR : st_event, it_event[].
*- Local variable
DATA : l_tabix TYPE sy-tabix.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- Read event table
READ TABLE it_event WITH KEY name = slis_ev_user_command
INTO st_event.
*- Clear
CLEAR l_tabix.
l_tabix = sy-tabix.
*- Check subrc
IF sy-subrc = 0.
st_event-form = c_usercommand.
*- Modify
MODIFY it_event FROM st_event INDEX l_tabix.
*- Clear
CLEAR st_event.
ENDIF.
ENDFORM. " fill_event
*& Form get_data_vbap
text
FORM get_data_vbap .
IF NOT it_vbak[] IS INITIAL.
SELECT vbeln
posnr
matnr
zmeng
netwr
FROM vbap
INTO TABLE it_vbap
WHERE vbeln = it_vbak-vbeln.
IF sy-subrc = 0.
SORT it_vbap BY vbeln.
ENDIF.
ENDIF.
ENDFORM. " get_data_vbap
*& Form build_field_catalog2
text
FORM build_field_catalog2 .
CLEAR:t_field1,w_field1.
w_field1-col_pos = 1.
w_field1-fieldname = 'VBELN'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Sales Order'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 2.
w_field1-fieldname = 'POSNR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Sales Doc Item'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 3.
w_field1-fieldname = 'MATNR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Material No'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 4.
w_field1-fieldname = 'ZMENG'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Target quan units'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 5.
w_field1-fieldname = 'NETWR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Net value dc cu'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
ENDFORM. " build_field_catalog2
*& Form print_field_data
text
FORM print_field_data .
SET PF-STATUS 'VBAP'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
i_grid_title = 'VBAP DETAILS'
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
it_fieldcat = t_field1[]
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
t_outtab = it_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_field_data
</code>Hi Satya..
This is the Sample code...
DATA : V_FORM_GUI TYPE SLIS_FORMNAME VALUE 'F_GUI'. "Form name
**Secondary List
FORM print_field_data .
SET PF-STATUS 'VBAP'. "This statement will not work for ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
<b> I_CALLBACK_PF_STATUS_SET = V_FORM_GUI
"Subroutine in which GUI status is called</b>
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND' "To handle GUI
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
i_grid_title = 'VBAP DETAILS'
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
it_fieldcat = t_field1[]
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
t_outtab = it_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_field_data
FORM F_GUI USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'GUI_1'. "Double click and Create this GUI status and add buttons
ENDFORM.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo -
I have a table in sql with employee_num and I need to create a list and link that list to this table to make changes to table based on values user enter or selects.
Hi,
In addition, you could refer to one similar thread for related information:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8ee8a7b2-ddfc-4654-b84e-b062aeb527ae/how-to-create-exernal-list-in-sharepoint-which-fetch-data-from-multiple-sql-table?forum=sharepointgeneral
Regards,
Rebecca Tu
TechNet Community Support -
How to create a working Gateway service utilizing an Existing ECC Function Module?
Hello All,
Our ECC (Back end) has a Function module which is to be used by creating a Gateway service .Can you suggest the step by step procedure with which i can continue to expose the service?
Any help on this is much appreciated!
Thanks,
UshaHi Usha,
the flag 'Local app' indicates where the implementation of the service is done because it can be done on the Hub or on the backend. (see my blog about deployment options SAP Gateway deployment options in a nutshell).
If you choose 'Local App' the BEP API will be called on your hub while otherwise it will be called on the backend system to which the RFC destination points to which has been maintained in your system alias definition.
Best Regards,
Andre
This is explanation offered by SAP Help:
Indicates that the System Alias is to be used by BEP
SAP NetWeaver Gateway applications can be developed either on a SAP Business
Suite backend system or on a SAP NetWeaver Gateway hub system. To access the
business logic from an SAP Business Suite backend system the software component
IW_BEP (Backend Enablement and Event Provisioning) has to be deployed in your
system landscape. IW_BEP can be deployed on the backend system or locally on the
SAP NetWeaver Gateway hub system. Communication is handled via system aliases
(RFC destinations).
Use
Set this flag if you use this system alias for an OData Channel application
that has been developed on the BEP add-on which is deployed on the SAP NetWeaver
Gateway hub system.
In this case the system alias information (such as RFC destiation, Web
service group, software version) is not used by SAP NetWeaver Gateway to
call the BEP API (it is called locally). Instead the system alias information is
passed through to the OData Channel application, so that it could then itself
make a call to the corresponding backend system. -
Create generic component to handle errors after using the function modules
Hi,
Please provide steps to create a generic component to handle the BAPI Return structure meesages after the function calls..
Please let me know how to pass the structure or internal table from one component to other.
Thanks in Advance,
SV
Moderator Message: No Step-by-steps will be provided here. Either take a classroom course or search for SAP Documentation
Edited by: kishan P on Dec 10, 2010 3:14 PMHi Hari,
Plz give me ur mail id.. i will forward some documents regarding Generic Extraction using FM and query...
For function module means.. you have to create function module. in RSAX..in R/3 side
and you want to extract data using Query means...you have to create Infoset query in (SQ01,SQ02,SQO3) IN r/3 Side
you can refer this blog also..
to Function module "RSAX_BIW_GET_DATA_SIMPLE" and there is very good weblog . Search "generic extraction" for weblog. /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
thanks
@jay -
F4 help in ALV grid by using function module?
Hi,
I need to get f4 search help in ALV grid for a certain fields by using function module method.
Please guide me.
Thank You.Hi
F4IF_INT_TABLE_VALUE_REQUEST use this fm to get f4 search help for a certain fields .
Regards
Divya -
Printing ALV Report output through Function Modules
Hi All,
I want to print my ALV Grid output through function modules/statement (not through print option in menu).
This is because, i am generating a PDF from spool when user clicks on a button. If any changes happened in the ALV output layout, they will be captured in spool through printing it.
So can you please tell me how to print the ALV Output through FMs or sending the ALV output to spool.
Thanks & Regards,
Senthil.
Edited by: senthil nathan on May 17, 2010 2:49 PMHi Dev,
Thanks for the reply.
I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
Regards,
Senthil. -
How to create secondary lists in ALV
Hi all,
Can u plz explain me how to create Secondary lists usingl ALV and how many secondary lists we can create.
Thanks in advance
Venkatthis is the very very simple program in HR module to demonstrate interactive ALV report.
If u have HR module implemented...just copy and paste this code and debug it...you will easily get the flow of the report...this is the simplest program..
i hope it helps...here u go......
REPORT ztej_alv_interactive.
TABLES: pa0000, pa0001.
DATA : BEGIN OF it0001 OCCURS 0,
pernr LIKE pa0001-pernr,
ename LIKE pa0001-ename,
END OF it0001.
DATA : BEGIN OF it0000 OCCURS 0,
pernr LIKE pa0000-pernr,
begda LIKE pa0000-begda,
endda LIKE pa0000-endda,
massn LIKE pa0000-massn,
massg LIKE pa0000-massg,
aedtm LIKE pa0000-aedtm,
END OF it0000.
TYPE-POOLS: slis.
DATA: v_repid LIKE sy-repid .
DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: i_fieldcat1 TYPE slis_t_fieldcat_alv.
DATA: it_listheader TYPE slis_t_listheader.
DATA: it_listheader1 TYPE slis_t_listheader.
DATA: v_events TYPE slis_t_event,
wa_event TYPE slis_alv_event.
DATA: alv_layout TYPE slis_layout_alv.
DATA: i_title_0001 TYPE lvc_title VALUE 'FIRST LIST DISPLAYED'.
DATA: i_title_0000 TYPE lvc_title.
DATA : temp_pernr LIKE pa0001-pernr.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS : s_pernr FOR pa0000-pernr DEFAULT '16240147'.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
v_repid = sy-repid.
PERFORM build_fieldcatlog USING i_fieldcat.
PERFORM event_call.
PERFORM populate_event.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_listheader USING it_listheader.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATLOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatlog USING temp_fieldcat TYPE slis_t_fieldcat_alv.
DATA : wa_temp_fieldcat TYPE slis_fieldcat_alv.
wa_temp_fieldcat-tabname = 'IT0001'.
wa_temp_fieldcat-fieldname = 'PERNR'.
wa_temp_fieldcat-seltext_m = 'Personnel Number'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
wa_temp_fieldcat-tabname = 'IT0001'.
wa_temp_fieldcat-fieldname = 'ENAME'.
wa_temp_fieldcat-seltext_m = 'Name'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG
*& Form EVENT_CALL
text
--> p1 text
<-- p2 text
FORM event_call.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = v_events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL
*& Form POPULATE_EVENT
text
--> p1 text
<-- p2 text
FORM populate_event.
READ TABLE v_events INTO wa_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'TOP_OF_PAGE'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-form.
ENDIF.
READ TABLE v_events INTO wa_event WITH KEY name = 'USER_COMMAND'.
IF sy-subrc EQ 0.
wa_event-form = 'USER_COMMAND'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-name.
ENDIF.
ENDFORM. " POPULATE_EVENT
*& Form DATA_RETRIEVAL
text
--> p1 text
<-- p2 text
FORM data_retrieval.
SELECT pernr ename
FROM pa0001
INTO TABLE it0001
WHERE pernr IN s_pernr.
DELETE ADJACENT DUPLICATES FROM it0001.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_LISTHEADER
text
-->P_IT_LISTHEADER text
FORM build_listheader USING i_listheader TYPE slis_t_listheader.
DATA hline TYPE slis_listheader.
hline-info = 'This is Interactive ALV Program.'.
hline-typ = 'H'.
APPEND hline TO i_listheader.
ENDFORM. " BUILD_LISTHEADER
*& Form DISPLAY_ALV_REPORT
text
--> p1 text
<-- p2 text
FORM display_alv_report.
v_repid = sy-repid.
alv_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = i_title_0001
I_GRID_SETTINGS =
is_layout = alv_layout
it_fieldcat = i_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
i_save = 'A'
is_variant = i_variant
it_events = v_events
TABLES
t_outtab = it0001
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH i_fieldcat.
CLEAR i_fieldcat.
REFRESH it_listheader.
CLEAR it_listheader.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form TOP_OF_PAGE
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
REFRESH i_fieldcat1.
REFRESH it_listheader1.
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE it0001 INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
temp_pernr = it0001-pernr.
PERFORM build_fieldcatlog_0000 USING i_fieldcat1.
PERFORM event_call_0000.
PERFORM populate_event_0000.
PERFORM data_retrieval_0000.
PERFORM build_listheader_0000 USING it_listheader1.
PERFORM display_alv_0000.
ENDIF.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_0000
text
--> p1 text
<-- p2 text
FORM build_fieldcatlog_0000 USING temp_fieldcat TYPE slis_t_fieldcat_alv
DATA : wa_temp_fieldcat TYPE slis_fieldcat_alv.
wa_temp_fieldcat-tabname = 'IT0000'.
wa_temp_fieldcat-fieldname = 'BEGDA'.
wa_temp_fieldcat-seltext_m = 'From Date'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
wa_temp_fieldcat-tabname = 'IT0000'.
wa_temp_fieldcat-fieldname = 'ENDDA'.
wa_temp_fieldcat-seltext_m = 'To Date'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
wa_temp_fieldcat-tabname = 'IT0000'.
wa_temp_fieldcat-fieldname = 'MASSN'.
wa_temp_fieldcat-seltext_m = 'Action'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
wa_temp_fieldcat-tabname = 'IT0000'.
wa_temp_fieldcat-fieldname = 'MASSG'.
wa_temp_fieldcat-seltext_m = 'Reason'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
wa_temp_fieldcat-tabname = 'IT0000'.
wa_temp_fieldcat-fieldname = 'AEDTM'.
wa_temp_fieldcat-seltext_m = 'Action Run On'.
APPEND wa_temp_fieldcat TO temp_fieldcat.
CLEAR wa_temp_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG
*& Form EVENT_CALL_0000
text
--> p1 text
<-- p2 text
FORM event_call_0000.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = v_events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL_0000
*& Form POPULATE_EVENT_0000
text
--> p1 text
<-- p2 text
FORM populate_event_0000.
READ TABLE v_events INTO wa_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'F_TOP_OF_PAGE'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-form.
ENDIF.
ENDFORM. " POPULATE_EVENT_0000
*& Form TOP_OF_PAGE
text
FORM f_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader1
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM data_retrieval_0000.
SELECT pernr begda endda massn massg aedtm
FROM pa0000
INTO TABLE it0000
WHERE pernr = temp_pernr.
ENDFORM.
*& Form BUILD_LISTHEADER_0000
text
-->P_IT_LISTHEADER text
FORM build_listheader_0000 USING i_listheader1 TYPE slis_t_listheader.
DATA: hline1 TYPE slis_listheader.
hline1-typ = 'H'.
hline1-info = 'Actions Detail List'.
APPEND hline1 TO i_listheader1.
ENDFORM. " BUILD_LISTHEADER_0000
*& Form DISPLAY_ALV_0000
text
--> p1 text
<-- p2 text
FORM display_alv_0000.
CONCATENATE 'Actions For Personnel Number ' temp_pernr
INTO i_title_0000 SEPARATED BY ' '.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
i_callback_top_of_page = 'F_TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
i_grid_title = i_title_0000
I_GRID_SETTINGS =
is_layout = alv_layout
it_fieldcat = i_fieldcat1[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
i_save = 'A'
IS_VARIANT =
it_events = v_events
TABLES
t_outtab = it0000
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_0000
Regards,
Tejas -
How to create a Custom List without the column "Title" ?
Maybe this one is easy as it sounds, I just want to know how to create a little list for my SharePoint application featuring 3 columns:
1 - User Name (this should be Person type - UNIQUE + Required)
2 - Report (Memo - Required)
3 - Status (Choice + Required)
The list will be used to allow the users to submit a weekly report and I don't want to include the title because there is no use to me, I know I can hide the column by customizing the list but this sounds very amateur even for a newbie like me (yeah... sounds
so cheap!), since I've been reading a lot about custom content types and I still didn't get the chance to use this properly I was wondering how I could put them to use and I guess the example here would be the best right?
I really spent some time trying but I always end getting the Title even when I try to use custom content types so I'm really giving up and asking for some help at this point.
Thanks a lot for the help!!!Yes, you can do that. If you need a different content type with your custom fields. Following are the steps : http://www.dotnetcurry.com/ShowArticle.aspx?ID=620
After creating your custom Content Type, Click on the 'Title' filed in your custom content type.
In the 'Column Settings' make it 'Hidden (Will not appear in forms)' and click ok.
Now add this content type to your list/library.
In the list/Library go to setting and 'Advance settings' and make the 'Allow management of Content Type?' as 'yes' and click ok.
Now make default content type not visible from 'Change new button order and default content type' link in the settings page of list/library, and your contet type as 'Default'.
Create a new view, remove the 'Title' field and make that view as 'dafault' view, you can delete the 'All Items' view also if required.
Now whenever user come to that list/Library they will not see the title column and also will not appear in the 'New Item'.
Note : The 'Title' field is mandatory in all the list/library and by default added to the 'All Item' view. So, by doing above steps you are creating a new content type where 'Title' is not mandatory and also not added in default view.
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you. -
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha. -
How to create a pulldown list in numbers
how to create a pulldown list in numbers
Here is it:
Open Applescript editor
Copy the entire script and paste it into Applescript Editor
Compile it
Read the instructions at the top of the script
Run the script, following the instructions.
You can save the script and it will be available in the Scripts menu (on the right side of the menu bar where Time Machine , Airport, and all those icons are).
Copy and paste all of what is below:
-- Script to populate a Numbers pop-up list.
-- Instructions:
-- GUI scripting must be on in System Preferences
-- Create a list of items. Must be a contiguous range of cells in a table.
-- Select the range of cells to use as items in the popup.
-- Run the script.
-- A dialog box will appear asking you to select which cells you want to turn into pop-ups
-- Select the cells then click OK on the dialog box
set tValues to my doThis(1) -- get values of the selection
if tValues is not "" then
activate
display dialog "Select the cells where you want to create the PopUp." & return & "After that, click on the 'OK' button."
my doThis(tValues) -- set the cell format of the new selection to "PopUp Menu" and set the values of the each menu item
tell application "Numbers" to display dialog "Done"
else
tell application "Numbers" to display dialog "You must select the cells in a table before running this script."
end if
on doThis(n)
tell application "Numbers"
set tTables to (tables of sheets of front document whose its selection range is not missing value)
repeat with t in tTables -- t is a list of tables of a sheet
if contents of t is not {} then -- this list is not empty, it's the selected sheet
set activeTable to (get item 1 of t)
if n = 1 then return value of cells of selection range of activeTable -- return values of the selection
set format of (cells of selection range of activeTable) to pop up menu -- set the format to pop up menu
return my setValuePopUp(n) -- set value of each menu item
end if
end repeat
end tell
return ""
end doThis
on setValuePopUp(L)
tell application "System Events"
tell process "Numbers"
set frontmost to true
delay 0.3
set inspectorWindow to missing value
set tWindows to windows whose subrole is "AXFloatingWindow"
repeat with i in tWindows
if exists radio group 1 of i then
set inspectorWindow to i
exit repeat
end if
end repeat
if inspectorWindow is missing value then
keystroke "i" using {option down, command down} -- Show Inspector
else
perform action "AXRaise" of inspectorWindow -- raise the Inspector window to the front
end if
delay 0.3
tell window 1
click radio button 4 of radio group 1 -- the "cell format" tab
delay 0.3
tell group 2 of group 1
set tTable to table 1 of scroll area 1
set tc to count rows of tTable
set lenL to (count L)
if tc < lenL then -- ** add menu items **
repeat until (count rows of tTable) = lenL
click button 1 -- button [+]
end repeat
keystroke return -- validate the default name of the last menu item
else if tc > lenL then -- ** remove menu items **
repeat while exists row (lenL + 1) of tTable
select row (lenL + 1) of tTable
click button 2 -- button [-]
end repeat
end if
tell tTable to repeat with i from 1 to lenL -- ** change value of each menu item **
set value of text field 1 of row i to item i of L
end repeat
end tell
end tell
end tell
end tell
end setValuePopUp -
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers
Maybe you are looking for
-
What's wrong with my Button?
Hello everyone, I been trying to get my Button working, but I don't understand what's wrong. I've tried a bunch of stuff, each with failure. Can any of you guys help me out here? I know that it's a little bit of a mess, but for some reason, it gives
-
Stuck on the second page.
Post Author: alex757 CA Forum: Crystal Reports I am having a problem with a couple of crystal reports that I have recently developed. The reports were created using CR 9.5 and are posted on Crystal Enterprise 9.0 server. When the either of the two re
-
Importing stereo tracks, simple and silly
So I've stepped away from the sound portion of my work and am now getting back to the grind. I have FCP suite 5. When I export from FCP to STP as a multitrack project I unlink the stereo pair of my field recordings, and they appear as separate tracks
-
Can i print a card i make in iPhoto '11, can i print a card i make in iPhoto '11
the title says it can i print at home a card i make in iphoto '11 rather than paying Apple to do it? thx Deb
-
Viewing and modifying deployed ess appls in NWDS
Hi All, we successfully installed and configured NWDI and created tracks and imported the relevant sca files in the Development system. At this point of time, we want to open up one of the ess applications in NWDS to be able to understand the structu