How to  Create  a selection variable for Fiscal period/year range

How to  Create  a selection variable for Fiscal period/year range. The idea is to filter the query results using a fiscal period/year range user input rather than a full fiscal year input.

Hi Priya,
Open the query in a query designer -> in the left hand side you would find the fiscal year period under the time dimension -> right click -> create variable -> create the variable.
The better option would be use any of the SAP provided variable. You would find them under the Fiscal year period in the left hand side in the query designer.
Bye
Dinesh

Similar Messages

  • How to create a 0FISCPER variable for [last period of current year]

    Hello,
    Can anybody tell me how to create a (exit) variable for the last period of the current year, based on 0FISCPER ?
    Based on a single value, user entry variable based on 0FISCPER.
    I did not find any standard (business content) variables for this.
    Can anybody tell me whether the following alternative works:
    variable 0P_BA102 (last period pervious year) with offset of +12 
    Kind regards.

    Hi,
    It should work.
    You can refer to the following link:
    http://help.sap.com/saphelp_sm32/helpdata/en/3f/89533e5ff4d064e10000000a114084/content.htm
    Regards,
    Amit

  • How to Create a Selection Variable for restricting the querry output

    Hi Gurus,
    I have created a query in query designer on a Multiprovider and the output of the query is a Formula in a structure which calculates a % value, the client is looking for entering a range of number during the query selection screen and the output should be restricted to the given selection values.
    Can any one tell me how i should create a selection variable that would take the input from the user during the query selection screen and then restrict the output to that value which user specified.
    Is there a need to write any customer exit or is there any alternative way to make the query work as the requirement is.
    I hope this explains my problem but if any questions please let me know so that i can give u specific information.
    Thanks,
    Nisha.

    Hi Nisha,
    Firstly, in order to restrict the query output by a key figure value, you will need to create a condition on that key figure. This is done in the query deisgner. Now when you are creating the condition you can also use user entry variables (formula variables with user entry) to let the users enter the value that they want to see.
    See here for more details:
    http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/content.htm
    Hope this helps...

  • How to create the select option for the Plant in screen (Module pool)

    HI,
    I am developing one module pool program and I have below requirement,
    currently plant is acting like PARAMETER and the now it should be changed to select option.
    how to create the select option in the screen
    Thanks and regarding,
    Malla
    Moderator message - Cross post locked
    Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

    Steps to get SELECT-OPTIONS in module pool programs.
    1.Start one dialog program with SAPMZ_001.
    Place the below code in the TOP include of the dialog program.
    TABLES marc.
    SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
    SELECT-OPTIONS: werks FOR marc-werks.
    SELECTION-SCREEN END OF SCREEN 3200. 
    2 .Create one screen 3000.
    Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
    Place the below code in the Flow logic of the screen.
    PROCESS BEFORE OUTPUT.
      CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
    PROCESS AFTER INPUT.
      CALL SUBSCREEN l_subscreen.
    Activate all.
    Create Transaction code for the dialog program .
    Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

  • How to create column selection variant for VA05?

    Hi Experts,
    How do I create column selection variant for VA05?
    Thanks,
    Sachin

    Hi,
    Goto SU3, enter user name and press enter
    goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
    Now check in VA05, you will get save button in active mode.
    Regards,
    Chandra

  • How to create a custom variable for a Label?

    i need my label to store a string variable in it, do you know i can create a custom variable for it.
    i mean for example if it's name is "StoredString" i can access it in my code by "label1.StoredString" just like "Label1.text" or something like that.

    Thanks for pvdg42's help.
    Hi soorena12,
    Based on your issue, I suggest you can try the pvdg42's suggestion check your issue in your side.
    If it still could not help you solve this issue, I suggest you can tell me which kind of application you create the label in the VS IDE?
    What language you use to create for your application?
    If you have any update message about your issue, please tell us.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to create an Apple Id for a 10 year old kid ?

    I'd like to create an Apple Id for my 10 year old kid in order to use the family sharing.
    How can I do this ?

    The answer is here : http://support.apple.com/kb/HT201084?viewlocale=en_US&locale=en_US

  • Standard Field for Fiscal Period/Year

    Hi
    Is there any standard table field for <b>Fiscal Period/Year</b> so that i can use it to type my select-option field in the selection screen.
    Thanks and Regards,
    Navaneeth

    Hi,
    Check field BKPF-GJAHR and BKPF-MONAT .
    And/or BSEG-ABPER ( period ).
    Erwan
    Message was edited by:
            Erwan LE BRUN

  • How to create boolean selection variable

    hi experts,
    i need a selection variable (which can be a boolean).
    depending on the value of ythis variable, i would like to adjust calculation of number of worked days in the month with taking/or not into account current day in this calculation...
    i already implemented exit for this calculation, but i don't know how to create this variable without changing anything in the infocubes...
    any idea?....
    Dev

    Hi,
    once u solved it with your own please post it...share the knowledge to others who are facing the same issue.
    Thanks,
    Chinna.

  • How to create a text variable for Calender Yr/Month depending on the prompt for calendar year

    Hi everyone
    Please assist on this issue:
    i have created a Bex report that has an offset for 12 months from the current calender month, i tried to use text variables to replace the calender months but i just learned now text variables from Bex dont work in BO, so I would like to create a prompt in BO to enter Calendar Year and then based on the input(Calender Year) the Webi report must display a 12 months for that Year.
    Please also indicate where exactly  i have to click in order to get that "Helpful icon "  when the my issues have been resolved, because i searched it and havent seen it anywhere on the communications
    Thanks in Advance
    Ole

    Hi Gill
    In BO I recieve my all months for existing data  and when i create a prompt for Calender Year the months in the report still has those text varibale for exampl if i enter 2011 on the prompt the text remains for the year that was already there wen i created my text variable... so its not dynamic.....
    So if i have text variables in Bex it will display like this in Webi in which it wont change if i put in 2011 as input for the prompt...

  • How to create own Selection Parameter for ME2M list

    Dear Sir,
    We use ME2m tcode for getting list related to Purchase Order . We have been told that we can create our own "SELECTION PARAMETER" for ths report . Kindly guide us as what steps need to be done for this pl .
    With Thanks and Regards
    Sonia Mittal

    you can also set a variant for the existing / default ME2M screen
    fill all the required entries then click on GOTO >>Variants >Save as Variant
    next time when you run T code ME2M, you can select the variant and run the t code
    hope this will help you

  • How to Create Dynamic Columns based on Fiscal Period

    HI BI World;) We are on BI &.0
    I have a requirement to create a time series BI query
    It must take the variable value (range) from the user abd create all months within this range in a time series displaying the key figure value for the respective periods.
    I have so far added the fiscal year period characteristic  to the columns with the key figure under this and the fiscal/year period is on a restiction in the filter area by a variable (range)
    When I run this query it only shows the fiscal periods which have a value for the key figure. Is it possible to show all fiscal periods and have blank columns where there is no value for the respective key figure/period.
    I have tried using master data for the fiscal period but this does not work as has some junk values.
    Any ideas? I need to show alll periods between the dates whether they have values or not.
    Best,
    Stevo
    Points will be awarded.
    Thanks in advance

    Hi,
    Try restricting the fiscal period inside the keyfigure and in the output format try drill across of fiscal period.
    in tne fical period char properties try masterdata relationship option.
    Thanks,
    Arun.

  • How to create a new row for a VO based on values from another VO?

    Hi, experts.
    in jdev 11.1.2.3,
    How to create a new row for VO1 based on values from another VO2 in the same page?
    and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
    Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
    How-to declaratively create new table rows based on existing row content (20-NOV-2008)
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
    I have tried:
    1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
    2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
    3.add: Create insertinside Createwithparams->Nameddata(amount),
    4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
    On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
    <Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
    java.lang.NumberFormatException: For input string: "Amount"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    Can anyone give some suggestions?
    Thanks in advance.
    bao
    Edited by: user6715237 on 2013-4-19 下午9:29

    Hi,CM,
    I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
    My principal requirement is as follows:
    1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
    --so it's better to implement it in UI rather than in EO.
    2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
    --little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
    In order to get full information for the requirements of my use case, can take a check at:
    How to set default value for a VO query bind variable in a jspx page?
    (the end half of the thread: I have a more realworld requirement similar to the above requirement is:
    Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
    Regards
    bao
    Edited by: user6715237 on 2013-4-19 下午11:18
    JAVE->JAVA

  • How to Create a Text Variable

    Hi Experts...
    Can you please explain me how to create a Text variable...
    In my Cube i had 3 different date fields....
    and as per my requirment i need to create a rolling report for which will display data for 6 months rolling.
    As the date field which i need to use is not mapped to Time Char's (Cal Year,Cal Month...etc)
    For that reason i created below customer exit variable and used offset variables to achieve the rolling 6 months report
    Code used for Customer Exit VAriable:
    WHEN 'ZC_Cmonth1'. " Current Cal Month Car Expiry
    IF i_step = 2.
          CLEAR l_s_range.
    determine date
        LV_SYDAT     =  SY-DATUM.
        LV_YEAR_ACT  =  SY-DATUM+0(4).
        LV_MONTH_ACT =  SY-DATUM+4(2).
    Set begin date of intervall
    CONCATENATE LV_YEAR_ACT LV_MONTH_ACT '01' INTO LV_DATE_LOW.
    Set end date of intervall
    CONCATENATE LV_YEAR_ACT LV_MONTH_ACT '31' INTO LV_DATE_HIGH.
    Fill ranges-tab with: include all values between beginning of year
    and actual date
      CLEAR E_T_RANGE.
      CLEAR L_S_RANGE.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT  = 'BT'.
      L_S_RANGE-LOW  = LV_DATE_LOW.
      L_S_RANGE-HIGH = LV_DATE_HIGH.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    Now i need to create TEXT VARIABLE that will display the Month Name in the column name
    Please update in detail step how to create a Text Variable

    In your specific requirement select the which ever the keyfigure you want  to analyse, go to edit mode of keyfigure propeties there select the newvariable type and create the Text variable by maintaining the proper offset start and length and also maintain the in whcih format u want see the month name in column headers. Maintain the Text format or key format. it totally depends on u r requirement.
    Hope it will help ful for u.
    Bye,
    Chandu.

  • Custom exit variable for fiscal year/period

    Hi BI Experts
    1) In one of the column i just want Budget data to be displayed for the entire year..i.e even if the user enters 005/2006 for fiscal year /period that column should display 001/2006 to 012/2006 Budget.
    I have created a restricted KF for 0AMOUNT restricted by version(for Budget), valuetype (for Budget )
    now how do I assign variable for Fiscal year/period...and the problem is posting period is not populated ...I mean there is no transformation for that...
    Can you share your experience on that ...full points wil be awarded...
    Thanks

    Hi Ajay and Pradhiba
    I am really sorry for assigning you guuys points ...wasa bit busy ...
    The problem is that the year and posting period is not populated...there fore I cannot use those time characteristics...
    Now I have only fiscal year/period populated..now i want
    if the user enters 005/2006 ....i want my first column to calculate the data for 001/2006 to 012/2006 ...thats the req...
    can u share ur ABAP experience in that...
    thanks

Maybe you are looking for