How to create a separate sheet listing specific contents of another?

Here's the context:
There's a recording studio complex containing three seperate studios; studio 1, studio 2 and studio 3.
I have created a Numbers document with a Main sheet listing ALL of the equipment in the complex. The table in this sheet details the make and model of each piece of equipment, its value, serial number etc etc... There's a column called 'Location' listing which of the three studios each piece of equipment is in.
I now want three sererate sheets for each of the three studios and ideally the tables in these sheets will automatically update depending on what is written in the 'Location' column of the Main sheet.
Can somebody please tell me if this is possible and if so, how? If not possible, what would you suggest as an alternative?
Thanks you very much in advance,
Joseph

Hi Joseph,
Listen Inn is correct; the linked discussion answers essentially the same question as you asked.
Think of the first column (A) in the Data table as holding the Make of the piece, the second (B) the Model, and the third (C) the serial number.
Column D (labelled "Store") contains the location information.
The last column contains an index. made up of the Location and a count of items in that location from the top of the Data table to the current row.
Set up the table and formulas as shown in the the other discussion, then insert columns after column B or C until you have enough column for your date.
Enter oyur data, and you should be good to go.
Regards,
Barry

Similar Messages

  • How to create a file and store its contents into another file?

    Hi,
    I'm having some trouble trying to create a code where I have to to create a file and store its contents into another file?
    I read the API, but I'm not certain how this file thing works.
    Here's my code so far:
    public static void main(String[] args) throws Exception
              File file = new File("tasks.txt");
              if (file.exists())
                   System.out.println("File already exists");
                   System.exit(0);
              Scanner scan = new Scanner(System.in);
              Scanner scan2 = new Scanner(System.in);
              //Scans the input line by line
              scan.useDelimiter("\\n");
              //Scans the input by tabs
              scan2.useDelimiter("\\t");
              PrintWriter outputs = new PrintWriter("newtasks.txt");
              outputs.print("ok");
              outputs.println(3);
              outputs.close();
         }

    I managed to change my text into uppercase, but how do I store the uppercase content into another file.
    -So this is what I did so far, I took a text file and modified its strings to uppercase.
    -Now I need to put those modified strings into another text file, is there a way where I can do that with my current code?
    -I already tried printwriter, but it doesn't seem to work
    public static void main(String[] args)throws IOException
              //Task[] oneHundredTasks = new Task[100];
              String uppercase;
              String combine;
              Scanner scan = null;
              FileInputStream in = null;
            FileOutputStream out = null;
            PrintWriter output = null;
            try
                 scan = new Scanner(new BufferedReader(new FileReader("tasks.txt")));
                 scan.useDelimiter("\\n");
                 scan.useDelimiter("\\t");
                while (scan.hasNext())
                     if(!scan.hasNext())
                          scan.next();
                     combine = scan.next();
                     uppercase = combine.toUpperCase();
                     System.out.println(uppercase);
            finally
                if (scan != null)
                    scan.close();
            //The program will try the input and output files
            try
                 in = new FileInputStream("tasks.txt");
                out = new FileOutputStream("newtasks.txt");
                int c;
                //The number "-1" is used to indicate that it has reached the end of the stream.
                while ((c = in.read()) != -1)
                    out.write(c);
            finally
                if (in != null)
                    in.close();
                if (out != null)
                    out.close();
         }

  • How to create a group mailing list in JavaMail?

    Hello,
    I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
    That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
    Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
    Thanks in advance!

    Hi:
    I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
    Best regards,
    Fabio Galarraga.

  • How to create a group contact list on iphone4?

    how to create a group contact list on iphone4?

    You can create your groups on your computer and sync them on your iPhone. Or you can use an application. I developped Easy Group, to manage group of contacts, and send group texts and group emails.
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • How to create a group mailing list?

    how to create agroup mailing list?

    i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column.   this is after i created a new group under address book, & then drug over individual names into the group.   what am i doing wrong?

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • How to create more than 21 lists in interactive reports

    hello everyone,
    I am new to ABAP as well as this site. Kindly help, I want to know how to create more than 21 lists in interactive reports.
    Also, how can i create them without using WHEN 1, wHEN 2 and so on...
    Kindly help.
    thank you

    Hello,
    Using Intracive Reports its not possible to cretate more than 21 lists.
    But its possible to create more than 21 using ALV concept.
    for sample ALV u can serch in SDN.
    Regards,
    Anil.

  • How to create a folder for a specific e-mail account?

    How to create a folder for a specific e-mail account?
    I'm using a POP e-mail account and I would like to create folders / sub-folders... how can I do this?

    You can right click on your Desktop and select New Folder.  In Finder File > New Folder should work too, not in front of my Mac.
    Welcome to back by the way.  You might find these websites helpful.
    Switch 101
    Mac 101

  • How to create a String with a specific size?

    how to create a String with a specific size?
    For example I want to create different Strings with the size of 100 , 1000 or 63k byte?

    String are immutable so just initialize it with the number of characters you want.
    You might want to look at java.lang.StringBuffer and see if that's what you want.

  • Access - How to create Mail Address only list?

    Printing envelopes from mail lists - via Microsoft Excel? Access - How to create Mail Address Only list?
    Bearing my "new boy" status, step by step instruction would be appreciated.

    Hi
    This is a question only about the Microsoft products and has nothing to do with Toshiba notebooks but I have investigated a little bit in the net and found this useful sites:
    http://support.microsoft.com/kb/q141991/
    https://www.nahu.org/member/using%20excel%20to%20create%20lists%20and%20labels .pdf

  • How to create 2/3 dropdown lists

    How to create 2/3 dropdown lists that are linked.  The first one answered drives the answer for the second or thrid dropdown box.
    Also can I wrap text in a dropdown list?
    Thanks in advance.

    This is the scripting I tried to use  in the first dropdown list and it doesn't work, any HELP would be appreciated.
    form1.#subform[0].DropDownList1::exit - (JavaScript, client)
    if(this.rawValue=="a")
    DropDownList2a.presence = "visible";
    DropDownList2b.presence = "hidden";
    DropDownList2c.presence = "hidden";
    else if (this.rawValue == "b")
    DropDownList2a.presence = "hidden";
    DropDownList2b.presence = "visible";
    DropDownList2c.presence = "hidden";
    else if (this.rawValue == "c")
    DropDownList2a.presence = "hidden";
    DropDownList2b.presence = "hidden";
    DropDownList2c.presence = "visible";
    Thanks in advance

  • How to create a Unique Member List for PlugAccounts ?

    Hello everybody,
    Does anyone knows or did it in the past how to create a Unique Member List for Plug Accts? If anyone does could you please paste some scripting for reference?
    Thank you very much, JB

                             Dim arrPlugs(100)
                             j = 1     
                                       Plug_Acct_List = HS.Account.List("","")
                                       For Plug_Acct_loop = LBound(Plug_Acct_List) To UBound(Plug_Acct_List)
                                  If Hs.Account.PlugAcct(Plug_Acct_List(Plug_Acct_Loop)) <> "" then
                                       strPlug = Hs.Account.PlugAcct(Plug_Acct_List(Plug_Acct_Loop))
                                       blnFound = False
                                       For i = LBound(arrPlugs) to UBound(arrPlugs)
                                            If arrPlugs(i) = strPlug then blnFound = True
                                       Next
                                       If blnFound = False then
                                            HS.AddMemberToList strPlug
                                            arrPlugs(j) = strPlug
                                            j = j + 1
                                       End If
                                  End If
                             Next

  • How to create GOS view attachment list in ECC6

    Hi,
    I created Z transaction. I have to create View attachment List to this transaction. How to create GOS view attachment list in ECC6. can anybody send sample code on this.
    Thanks in advance.
    Zakir.

    Hi all,
    I've following problem with class CL_GOS_ATTACHMENTS.
    Transaction IE01/02/03 (create/change/display equipment) starts and instantiate GOS manager, and related BAdI are called.
    Then, when I choose one of available service, CL_GOS_ATTACHMENTS is instantiated, and inside that class a new GOS manager is instantiated, inspite of already existing instance.
    As a result, related BAdI are called twice, but unfortunately second time some SY variables are not correctly filled, particularly SY-TCODE and SY-MODNO are both empty.
    I've develop a workaround so that when sy-tcode is filled I save it somwhere, and when it's empty I filled it from saved value, does anyone know any other solution??
    Many thanks
    Regards
    m@x

  • How to create a contact sheet of images in CS5

    How to create a contact sheet of images in CS5.  Different set up than older version I worked on before.

    Have I missed something that the Adobe Bridge Output Module didn’t seem to offer a printing option?  Tried the older plug-in which is what I was familiar with, but that seems to download all the plug ins, not just contact sheets. Do I have to download the whole shebang?

  • How to create a 2 column list with bullets

    How can I create a 2 columned list with bullets? When I hit tab button, the whole word and bullet moves. I am trying to create a checklist with 2 columns with a visual bullet in front of specific list items. Thanks for any help! chris

    Why not just use 2 columns?
    Or if they need to stay in step, a table?
    Peter
    btw A tab in a list changes its level, option tab moves it to the next tab on the ruler. A silly choice to make it the opposite of common sense, but they followed the lead of MsWord on this one.

Maybe you are looking for

  • ICal Print List - Why are to-dos randomly sorted?

    When printing from iCal in the list view, my To-Do List is NEVER sorted the way I sorted it in the main iCal window (whether by Calendar, Priority, or Manually). Instead it's just sorted randomly, which is very unorganized. Does anyone know why this

  • All I want is audio from a DVD!

    I have a few music DVD's, and all I want is to get the audio from them into my iPod. 1) I've seen the debate rage re. whether or not one SHOULD be able to copy DVD's (video and all), but no one ever definitively asked or answered, much less on this s

  • Select query on  CRMD_ORDERADM_H (urgent)

    Hi All,       I want to retrieve data from CRMD_ORDERADM_H that would fetch all transactions created on the same day before 6pm. I also want another internal table that would contain transaction created on the same day between 6pm and 11pm. How do I

  • Mapping the IDOC fields for Inbound PO

    Hi, I am trying to map the fields for PO for IDOC type ORDER05, but unable to do so for the following IDOC fields in segments. Document Date Vendor Account Assignment Category Delivery Date Requirement No. Requisitioner Purchase Requisition Preq Item

  • ** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?

    Hi Friends, All we know that since IDoc, XI adapters running on Integration Engine (SAP WAS 6.40), Sender Agreement is need not required. Since RFC is proprietary document for SAP like IDoc, why we are creating Sender Agreement for RFC adpater ? (We