How to create a System Extract for Communication

Hi,
I've built System Extracts before but not for Communication. Does anybody know what the steps are to create a System Extract for Communication? I already built a particular Communication Type and the delivery method is email. I was told that Oracle only creates the trigger for this Communication Type but not the email. If I built the System Extract Communication and run it, is that supposed to send an email? and if so, what kind of information will be sent in the email?
Thanks,
Ronaldo

Hi James,
If you like to use SAP web dispatcher as a solution for load balancing portal application, you no need to create system object under systems..
You have to install web dispatcher as separate instance where you need to configure portal apps into it..
Configure web dispatcher like to hit the admin port, use http://<webdisp-server>:<adminport>/sap/admin
For normal portal access, use http://<friendly URL>/irj/portal
The good news is that the webdispatcher knows that the portal supports SSL
Another advantage of this config, is the webdisp, will just replace the apache redirect server. Users will access mycompany.com, without any port number, since we are redirecting 80 to the backend j2ee. Also, https should work like in the normal world.
Profile will be like below...
SAPSYSTEMNAME = WEB
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
Message Server Parameters ##########
NOTE: The "ms/http_port" must match the profile on the Central Instance
rdisp/mshost = <FQDN of portal CI Host>
ms/http_port = <Ms port of portal>
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=3600, EXTBIND=1 (some OS will not allow to bind ports <1024)
Admin port details
icm/server_port_1 = PROT=HTTP,PORT=3200
#, EXTBIND=1
icm/HTTP/admin_0 =
PREFIX=/sap/admin,DOCROOT=./admin,PORT=3200,AUTHFILE=/usr/sap/WEB/SYS/global/security/data/icmauth.txt
SSL
icm/HTTP/redirect_0 = PREFIX=/ , TO=http://<friendly URL name>/irj/portal
WebAS Message Server Parameters
rdisp/TRACE = 1
icm/trace_secured_data = 1
Regards
Suresh

Similar Messages

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
Michael

Hi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create the pricing procedure for domestic & import.

HI,
Pls any body let me know how to create the pricing procedure for domestic & import.
what is the use of the keys
step condiiton condition type from to manual required statistic subtotal requirement caltype basetype.
how system will work based on this.

Hi,
Please see below WIKI for your reference:
http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
Regards,
Ninad Kshirsagar

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

Hi how to create logical systems.

Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.

Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub

Need document on how to create write back template for 11g

Can anybody provide documentation on how to create write back template for OBIEE 11g?
Thanks

Can anybody provide documentation on how to create write back template for OBIEE 11g?Yes! Oracle does. How about you start by reading it? I will give a hint, it's on the System's Administration guide.

How to create logical system

Hi,
How to create logical system.
Please help me with the steps for logical system creation in R3 system.
Thanks,
Kelly

Hi,
First make your client modifiable, then follow the below procedure.
Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
For more information use below link.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
Thanks,
Mano

How to create SAP System

Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan R

Hii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull.

How to Create Roaming Profile(s) For Windows Workgroups

This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

How to create the exe files for java application

How to create the exe file for java application?
got any software to do that?
Thanks

In terms of converting java applications into exe files, there are 3 schools of thought:
1) Instead of converting it to an exe, convert it to a jar file. Jar files are more portable than exe files because they can be double-clicked on any operating system. The caveat is that a Java interpreter must be installed on the target computer for the double-clicking to work.
http://developer.java.sun.com/developer/Books/javaprogramming/JAR/
2) Create an exe launcher that, when double-clicked, attempts to find a Java interpreter on the local computer and launches the Java application. The exe file is still double-clickable but whether your java application runs depends on whether a Java interpretor is installed on the target computer.
http://www.sureshotsoftware.com/exej/
http://www.objects.com.au/products/jstart/index.jsp
http://www.duckware.com/products/javatools.html
http://www.ucware.com/jexec/
http://www.rolemaker.dk/nonRoleMaker/javalauncher/
http://www.jelude.cjb.net/
http://thor.prohosting.com/~dfolly/java/index.html
3) Create an exe launcher that bundles a Java interpretor. Same as above but when the exe file is double-clicked, it searches for a Java interpreter and if one is not found, it installs one on the target computer. The caveat is that the exe file would have an overhead of 10 MB in size for the interpreter.
http://www.excelsior-usa.com/jet.html (evaluation version available)
4) Convert the Java application into a native exe file. The caveat is that if you use Swing for your GUI, it won't be converted. Also this option is still somewhat experimental.
Can't think of any free options right now.

How to create customer master data for walking customer in retail

hi experts !!!!!!
for retail industry e.g books trading industry
how to create customer master data for walking customer in retail
its dummy or one time customer
if i create one time customer then same customer number can i use for every new order and every new customer how ?????
thanks

Dear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
<b>
Follow below steps</b>
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

How to create an alternative bom for the same product

Hi expert,
I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
Please help me solve the problem.
Thanks in advance for any assistance.
George shi

HI
you can go with t-code CS01
if you have the BOM already and you want to create the alternative BOM then just goto create BOM
and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
then next system will prappose 2.
then you can enter the components as per you requirement
if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
prodcution version you need to craet from mateial master
each version you can go woith alternative BOMS
Version 1 will have alt BOM1
Version 2 can haev ALT BOM2
-ashok

How to create a System Extract for Communication

Similar Messages

Maybe you are looking for