How to create a table cell occupy more than one row using PDF.

Hi,
I want create a pdf report,which contains a table cell occupied more than one line.
just like html language: <rowspan = 2>
merge cells in one row is allowed,we can use merge cells command(like colspan in html).
but how to mege cells in one column?

Similar Messages

Table cell with more than one component

how can i make table cell with more than one component
like below, cell in column 3 contains few button
col0 | col1 | col2 |
a | b |[btn1] [btn2] [btn3]|
a | b |[btn1] [btn2] |
and when i click on the any of the button a dialog box pop up saying something..

Here's link to someone who did a lot with tables. Not sure about multiple buttons, but it should get you started.
http://www2.gol.com/users/tame/swing/examples/SwingExamples.html

How to create an iBOT which contains more than one dashboard page

Hi,
I want to create an iBOT which delivers the content in HTML or PDF format, but to contain more than one dashboard page. The idea is that I have several dashboards and I want to send by e-mail (by iBOT) most important pages from different dashboards.
Is it possible to send by a single e-mail different pages from different dashboards? I cannot find an way to accomplish this in the content of delivery in iBOT.
Thank you.

Hi,
Yes, I can add them to a briefing book, but the clients that will receive it by e-mail should have the briefing book reader in order to view the contents. Is there any way to send the briefing book in a PDF format?
Thank you.

Can a Table Cell span more than one page?

I'm working with tables in Pages to create a list of literature and important takeaways from each article. Sometimes the important information is more than I can fit on one page. However, Pages doesn't seem to be able to handle splitting cells across multiple pages. Instead, it seems to "push" the overflow text beyond the page, so I can't even see it as I'm typing.
In Word, such situations just cause the table cell to continue on to the next page. But I can't figure out how to do that in Pages. (And I'm a little concerned that there's not a way to handle this.)
Thanks!
Gary

The cell in question does split across 2 pages. "Do I need to" do that isn't really the point.
My question was whether Pages can handle splitting a table cell across 2 pages.
Pages can't; Word can.
(I'm trying to switch over for all of my future work into Pages, so there's a learning curve for me. The type of work I'm doing does have cells that split over 2 pages. In Word, it's not a big deal. Unfortunately, in Pages, I need to split the row in order to do the same thing. Which is kind of a pain, since I'm building the table dynamically and may insert rows above, below or between existing rows. In Word, it automatically handles moving the cells across multiple pages - or merging them back if I edit the text or insert/remove rows above.)

How does a chart track info on more than one row

As you can see by the attached graphic, I haven't had a problem until the new year hit where I need the chart to continue tracking info on two rows of data (year 2007) that continue onto another two rows of data (year 2008), and so forth into future years. Is there a way to do this with the current table, or do I need to create another table from which to build a chart.
!www.3bldesign.com/image/numberschart.png!
www.3bldesign.com/image/numberschart.png
Message was edited by: Tux Kapono
Message was edited by: Tux Kapono

In the example above, I removed the actual date values and created Text Labels only. This is probably why the graph is showing weird labels. The problem with Text labels are their use in an X-Y (or Scatter Graph.) Numbers needs to have a Month format for date data types. Do we need to go further with your request? For continuous lines, yes, the data needs to be formatted that way. The X-Axis values are coming from one row of data and in your original example "Feb" is only "Feb" (not Feb-07 and Feb-08).
Regards,
Edit:
The dark colored cells result when the graph is selected. If you want to reformat the cells you can do so by changing the cell's Font and Background colors using Inspector.
Message was edited by: WWJD

How can a table cell span more than one page?

I need to configure a table of text that permits a single cell containing a large quantity of text to automatically span several pages. This works easily in WORD but not (apparently) in PAGES. I have used the Inspector to check that the table is configured to "Automatically resize to fit content", and that text also wraps in the cells. However, when text entered into a cell reaches the bottom of the page it disappears from view, even though more text can still be added to thst cell. Thus, the contents of the cell do not automatically flow into view on the next page (as automatically does happen in Microsoft Word). The "Pages08 User Manual", page 177, makes no reference to this facility. Neither does the video tutorial on Pages tables. Furthermore, I can find nothing in the "Template Chooser" that I can adapt to my needs. I very much doubt that this is a real limitation in Pages software - so what I am doing wrong?

Thanks, Peter. Okay, I have tried this but without too much success.
I set up a landscape, two column page and imported the Russian text. That resulted in 13 pages of Russian text, in both left and right columns. I then added the English at the end of the Russian and now have 26 pages in total. Then, as you suggest, I inserted a Column Break after the Russian. This forced the English to begin afresh on page 14.
Now I need to find a way of keeping all the Russian text in the left column of all the 26 pages so that I can have the corresponding English translation adjacent in the right column (for all pages 1 - 26). I have explored your suggestion of Layout Breaks but think I have either misunderstood you, or I am doing something fundamentally wrong!
Okay, so now I need to be a little more specific to help you visualize the problem. On my page 1, left column, I have three paragraphs of Russian. Para 4 begins close to the bottom of the left column and flows, as expected into the right-hand column of page 1. Now, if I insert a Layout Break at the end of para 3, I find paras 1-3 are uniformly shared across both the left and right columns. Para 4 stays in the left column, and understandably has moved up somewhat, but para 5, following correctly below para 4 in the left column now flows into the right column, following on from the end of para 3. There are no visual breaks, so now my page 1 left column reads paras 1, 2, first part of 3, then 4 and first part of 5, while the right column now shows the second part of para 3 and the the second part of para 5. This is confusing to understand and confusing to read. This is no good at all.
Inserting a Section Break after para 3 results in para 4 beginning in the left column of page 2 and the whole of the right column of page 1 remains blank. It also seems that that right column is now rendered inaccessible and so I will not be able to put the English of paras 1- 3 into it so that they are adjacent to the Russian paras 1-3 in the left column of page 1.
Inserting a Page Break instead of a Section Break produces the same effect.
In conclusion, I am still stumped. To keep all the Russian in the left column of all 26 pages, I would need to insert a page break at the end of every page .... but then there would seem to be no way to insert the English into the corresponding right-hand columns, beginning of course on page 1. I am surprised that such a fundamentally useful word-processing facility is so complex (or perhaps impossible) in Pages.
Thanks, again, Peter. I have to say that you have been more helpful and informed than any others that have tussled with me over this difficulty.

Update gives "single-row subquery returns more than one row"

Hi,
I have to update a table by getting values from two other tables. While doing that the inner query returns more than one value. I am not sure how to implement the logic without returning more than one row in sub quesry. Need help on that.
My query:
update buf_office_str o
set o.manager_ident =
(select sp.ident
from se2_r_src_sourceperson sp ,
(select distinct director_name, team_name from buf_sales_dump )t
where SP.SRCNAME = upper(substr(t.director_name,instr(t.director_name,' ')+1,length(t.director_name))||', '||substr(t.director_name,1,instr(t.director_name,' ')-1 ) )
and o.office_descr = t.team_name
Basically the query gets teh manager id from sp table where sp.srcname = t.team-name.
The office descr should be equal to the team_name.
This is the logic I am working towards:
For each office, i get the office_descr and get corresponding team_name. Match the team's director_name (from table t) with the sp.name and return the employee's id (sp.ident) for that office_descr.
I need to update all 50 offices with corresponding managerid for that office in buf_office_str table.
Is it possible to get done in one update? Pls let me know.

Hi,
"Single-row subquery returns more than one row" is one of those error messages that actually means what it says: the correlated sub-query in your SET clause is sometimes returning 2 or more rows .
The solution could be as simple as making the sub-query SELECT DISTINCT , as its in-line view, t, already is.
It's possible you have bad data, or a mistake in your statement.
To find the problem cases, you can run something like this:
WITH sub_q     AS
                   SELECT -- DISTINCT ?
                            sp.ident
                   ,         t.team_name
                   ,         COUNT (*) OVER (PARTITION BY t.team_name)     AS cnt
                   FROM    se2_r_src_sourceperson     sp
                   ,         ( SELECT DISTINCT director_name
                               ,                  team_name
                           FROM            buf_sales_dump
                         )                    t
                   WHERE   sp.srcname     = UPPER ( SUBSTR ( t.director_name
                                                     , INSTR ( t.director_name
                                              ) + 1
                                            , LENGTH (t.director_name)
                                      || ', '
                                      || SUBSTR ( t.director_name
                                                      , 1
                                               , INSTR ( t.director_name
                                                    ) - 1
SELECT     o.*     -- or whatever helps you
,     sq.*
FROM     buf_office_str     o
JOIN     sub_q          sq     ON     o.office_descr = sq.team_name
WHERE     sq.cnt          > 1
;If you'd like more help, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables as they exist before the UPDATE, and the results you want from that data (that is, the contents of buf_office_str after the UPDATE). Make sure the problem occurs with the sample data you post.

How to retrive more than one row value from table

hi,
I had create one table if i entered value in more than one row, the second row override the first row value and while printing it in flat file i am getting the second value entered twice.
i created one context for each column.
    plz provide me a solution..........
       very urgent..........
        Regards,
        Kiruthika

Hi,
Create seperate element for each row and then set values.
for(int i=0;i<4;i++)
IPrivate<view name>.I<node name>Element element = wdContext.node<node name>().create<node name>Element();
wdContext.node<node name>().addElement(element);
element.set<Att>();
to retrive:
int s=wdContext.node<node name>.size();
for(int j=0;j<s;J++){
wdcontext.node<nodename>.getnodeelementAt(j).getAttribute();
Check this link about tables
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/bad3e990-0201-0010-3985-fa0936d901b4
Regards,
Vijayakhanna Raman

How to create a service call for more then one item

Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one item

As you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH

How to bring the more than one rows from the table into the script

Hi
I have to bring more than one rows from the table into the Main windows of the script. so plz help me out.
Thanks in Advance
Ananya

Hi Ananya,
   Bring more than one row into main window of script.
   For this you need to do some changes for data which you pass to main window.At a time you need to pass more than one row,so for this you need to define one structure.See below code.
Types:begin of ty_rows,
     include structure (your row_structure),
     include structure (your row_sturcture),
Types:end of ty_rows.
for example....
If i need to pass 2 vendor details at a time to main window then the structure should be like this.
Types:begin of ty_rows,
       vendor1 like lfa1-lifnr,
       vendor1_name like lfa1-name1,
       vendor2 like lfa1-lifnr,
       vendor2_name like lfa1-name1,
      end of ty_rows.
Data:i_main type standard table of ty_rows,
     wa_main type ty_rows.
Based on condition you can pass more than one rows of your actual internal table data to i_main internal table.
Then you can pass i_main internal table to your main window.
    I think this will help you.
Cheers,
Bujji

How to backup more than one database using powershell

I am Trying to backup more than one database using the following script but no luck. I want user to type on command line the database they want to backup, e.g all databases that have "test" at the front like test.inventory, test.sales so i want
user to type test.* and it backs up all databases related to test. Here is the script
#$date = Get-Date -Format yyyyMMddHHmmss
#$dbname = 'test.inventory'
$dbToBackup = "test.inventory"
cls
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoExtended") |
Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ConnectionInfo")
| Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoEnum") | Out-
Null
Add-Type -AssemblyName "Microsoft.SqlServer.Smo, Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91"
$server = New-Object Microsoft.SqlServer.Management.Smo.Server($env:ComputerName)
$server.Properties["BackupDirectory"].Value = "C:\_DBbackups"
$server.Alter()
$backupDirectory = $server.Settings.BackupDirectory
#display default backup directory
"Default Backup Directory: " + $backupDirectory
$db = $server.Databases[$dbToBackup]
$dbName = $db.Name
$timestamp = Get-Date -format yyyyMMddHHmmss
$smoBackup = New-Object ("Microsoft.SqlServer.Management.Smo.Backup")
#BackupActionType specifies the type of backup.
#Options are Database, Files, Log
#This belongs in Microsoft.SqlServer.SmoExtended assembly
$smoBackup.Action = "Database"
$smoBackup.BackupSetDescription = "Full Backup of " + $dbName
$smoBackup.BackupSetName = $dbName + " Backup"
$smoBackup.Database = $dbName
$smoBackup.MediaDescription = "Disk"
$smoBackup.Devices.AddDevice($backupDirectory + "\" + $dbName + "_" + $timestamp +
".bak", "File")
$smoBackup.SqlBackup($server)
#let's confirm, let's list list all backup files
$directory = Get-ChildItem $backupDirectory
$backupFilesList = $directory | where {$_.extension -eq ".bak"}
$backupFilesList | Format-Table Name, LastWriteTime

Or i am using this script which backs up everything except tempdb but dont know how to modify this so that it backs up up all test related databases
Is there a way that i use test.*
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | out-null
$s = new-object ("Microsoft.SqlServer.Management.Smo.Server") $instance
$bkdir = "C:\_DBbackups" #We define the folder path as a variable
$dbs = $s.Databases
foreach ($db in $dbs)
if($db.Name -ne "tempdb") #We don't want to backup the tempdb database
$dbname = $db.Name
$dt = get-date -format yyyyMMddHHmm #We use this to create a file name based on the timestamp
$dbBackup = new-object ("Microsoft.SqlServer.Management.Smo.Backup")
$dbBackup.Action = "Database"
$dbBackup.Database = $dbname
$dbBackup.Devices.AddDevice($bkdir + "\" + $dbname + "_db_" + $dt + ".bak", "File")
$dbBackup.SqlBackup($s)

How to select more than one row in a JTable swing adf adf?

how to select more than one row in a JTable swing adf adf?

// Allow selection to span one contiguous set of rows, visible columns, or block of cells
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
// Allow multiple selections of rows, visible columns, or cell blocks
table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);

How can I change all of (or more than one) speaker note to a voice at once?

Hello...
I have a lot of speaker notes that I need to apply a specific voice to. How do I apply the same voice to all of the speaker notes in the whole project at once? Or at least more than one? Any help would be appreciated. Thank you! I am working with Captivate 6.

Hi Vikram,
Thanks. That tip definitely helps! You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices. If you do that, then the drop down box becomes “unclickable”. Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
Ryan
Von: VikramGaur [email protected]
Gesendet: Donnerstag, 20. September 2012 16:25
An: Scharfer, Ryan
Betreff: How can I change all of (or more than one) speaker note to a voice at once?
Re: How can I change all of (or more than one) speaker note to a voice at once?
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Fetching more than one row from a table after selecting one value from the dropdown

Hi Experts,
How can we fetch more than one row from a table after selecting one value from the dropdown.
The scenario is that I have some entries in the dropdown like below
A               B               C
11256          VID          911256
11256          VID          811256
11256          SONY      11256
The 'B' values are there in the dropdown. I have removed the duplicate entries from the dropdown so now the dropdownlist has only two values.for eg- 'VID' and'SONY'. So now, after selecting 'VID' from the dropdown I should get all the 'C' values. After this the "C' values are to be passed to other methods to fetch some data from other tables.
Request your help on this.
Thanks,
Preeetam Narkhede.

Hi Preetam!
I hope I understand your request proberly, since this is more about Java and less about WebDynpro, but if I'm wrong, just follow up on this.
Supposed you have some collection of your original table data stored in variable "origin". Populate a Hashtable using the values from column "B" (let's assume it's Strings) as keys and an ArrayList of whatever "C" is (let's assume String instances, too) as value (there's a lot of ways to iterate over whatever your datasource is, and since we do not know what your datasource is, maybe you'll have to follow another approach to get b and c vaues,but the principle should remain the same):
// Declare a private variable for your Data at the appropriate place in your code
private Hashtable temp = new Hashtable<String, ArrayList<String>>();
// Then, in the method you use to retrieve backend data and populate the dropdown,
// populate the Hashtable, too
Iterator<TableData> a = origin.iterator();
while (a.hasNext()) {
     TableData current = a.next();
     String b = current.getB();
     String c = current.getC();
     ArrayList<String> values = this.temp.get(b);
     if (values == null) {
          values = new ArrayList<String>();
     values.add(c);
     this.temp.put(b, values);
So after this, you'll have a Hashtable with the B values als keys and collections of C values of this particular B as value:
VID --> (911256, 811256)
SONY --> (11256)
Use
temp.keySet()
to populate your dropdown.
After the user selects an entry from the dropdown (let's say stored in variable selectedB), you will be able to retrieve the collection of c's from your Hashtable
// In the metod you handle the selection event with, get the c value collection
//and use it to select from your other table
ArrayList<String> selectedCs = this.temp.get(selectedB);
// now iterate over the selectedCs items and use each of these
//to continue retrieving whatever data you need...
for (String oneC : selectedCs) {
     // Select Data from backend using oneC in the where-Clause or whatever...
Hope that helps
Michael

How to create a table cell occupy more than one row using PDF.

Similar Messages

Maybe you are looking for